Commit aeec6cda authored by Viresh Kumar's avatar Viresh Kumar Committed by Vineet Gupta

ARC/time: Migrate to new 'set-state' interface

Migrate arc driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

Cc: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: default avatarViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: default avatarVineet Gupta <vgupta@synopsys.com>
parent 52721d9d
......@@ -203,34 +203,24 @@ static int arc_clkevent_set_next_event(unsigned long delta,
return 0;
}
static void arc_clkevent_set_mode(enum clock_event_mode mode,
struct clock_event_device *dev)
static int arc_clkevent_set_periodic(struct clock_event_device *dev)
{
switch (mode) {
case CLOCK_EVT_MODE_PERIODIC:
/*
* At X Hz, 1 sec = 1000ms -> X cycles;
* 10ms -> X / 100 cycles
*/
arc_timer_event_setup(arc_get_core_freq() / HZ);
break;
case CLOCK_EVT_MODE_ONESHOT:
break;
default:
break;
}
return;
return 0;
}
static DEFINE_PER_CPU(struct clock_event_device, arc_clockevent_device) = {
.name = "ARC Timer0",
.features = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_PERIODIC,
.mode = CLOCK_EVT_MODE_UNUSED,
.features = CLOCK_EVT_FEAT_ONESHOT |
CLOCK_EVT_FEAT_PERIODIC,
.rating = 300,
.irq = TIMER0_IRQ, /* hardwired, no need for resources */
.set_next_event = arc_clkevent_set_next_event,
.set_mode = arc_clkevent_set_mode,
.set_state_periodic = arc_clkevent_set_periodic,
};
static irqreturn_t timer_irq_handler(int irq, void *dev_id)
......@@ -240,7 +230,7 @@ static irqreturn_t timer_irq_handler(int irq, void *dev_id)
* irq_set_chip_and_handler() asked for handle_percpu_devid_irq()
*/
struct clock_event_device *evt = this_cpu_ptr(&arc_clockevent_device);
int irq_reenable = evt->mode == CLOCK_EVT_MODE_PERIODIC;
int irq_reenable = clockevent_state_periodic(evt);
/*
* Any write to CTRL reg ACks the interrupt, we rewrite the
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment