csky: Fixup cpu speculative execution to IO area

For the memory size ( > 512MB, < 1GB), the MSA setting is:

 - SSEG0: PHY_START        , PHY_START + 512MB
 - SSEG1: PHY_START + 512MB, PHY_START + 1GB

But the real memory is no more than 1GB, there is a gap between the
end size of memory and border of 1GB. CPU could speculatively
execute to that gap and if the gap of the bus couldn't respond to
the CPU request, then the crash will happen.

Now make the setting with:

 - SSEG0: PHY_START        , PHY_START + 512MB (no change)
 - SSEG1: Disabled (We use highmem to use the memory of 512MB~1GB)

We also deprecated zhole_szie[] settings, it's only used by arm
style CPUs. All memory gap should use Reserved setting of dts in
csky system.
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>

arch/csky/abiv1/inc/abi/entry.h

@@ -172,10 +172,7 @@
 	addi	r6, 0xe
 	cpwcr	r6, cpcr30
 
-	lsri	r6, 28
-	addi	r6, 2
-	lsli	r6, 28
-	addi	r6, 0xe
+	movi	r6, 0
 	cpwcr	r6, cpcr31
 .endm
 

arch/csky/abiv2/inc/abi/entry.h

@@ -290,11 +290,8 @@
 	addi	r6, 0x1ce
 	mtcr	r6, cr<30, 15> /* Set MSA0 */
 
-	lsri	r6, 28
-	addi	r6, 2
-	lsli	r6, 28
-	addi	r6, 0x1ce
-	mtcr	r6, cr<31, 15> /* Set MSA1 */
+	movi    r6, 0
+	mtcr	r6, cr<31, 15> /* Clr MSA1 */
 
 	/* enable MMU */
 	mfcr    r6, cr18

arch/csky/kernel/head.S

@@ -21,6 +21,11 @@ END(_start)
 ENTRY(_start_smp_secondary)
 	SETUP_MMU
 
+	/* copy msa1 from CPU0 */
+	lrw     r6, secondary_msa1
+	ld.w	r6, (r6, 0)
+	mtcr	r6, cr<31, 15>
+
 	/* set stack point */
 	lrw     r6, secondary_stack
 	ld.w	r6, (r6, 0)

arch/csky/kernel/setup.c

@@ -24,26 +24,9 @@ struct screen_info screen_info = {
 };
 #endif
 
-phys_addr_t __init_memblock memblock_end_of_REG0(void)
-{
-	return (memblock.memory.regions[0].base +
-		memblock.memory.regions[0].size);
-}
-
-phys_addr_t __init_memblock memblock_start_of_REG1(void)
-{
-	return memblock.memory.regions[1].base;
-}
-
-size_t __init_memblock memblock_size_of_REG1(void)
-{
-	return memblock.memory.regions[1].size;
-}
-
 static void __init csky_memblock_init(void)
 {
 	unsigned long zone_size[MAX_NR_ZONES];
-	unsigned long zhole_size[MAX_NR_ZONES];
 	signed long size;
 
 	memblock_reserve(__pa(_stext), _end - _stext);
@@ -54,54 +37,36 @@ static void __init csky_memblock_init(void)
 	memblock_dump_all();
 
 	memset(zone_size, 0, sizeof(zone_size));
-	memset(zhole_size, 0, sizeof(zhole_size));
 
 	min_low_pfn = PFN_UP(memblock_start_of_DRAM());
-	max_pfn	    = PFN_DOWN(memblock_end_of_DRAM());
-
-	max_low_pfn = PFN_UP(memblock_end_of_REG0());
-	if (max_low_pfn == 0)
-		max_low_pfn = max_pfn;
+	max_low_pfn = max_pfn = PFN_DOWN(memblock_end_of_DRAM());
 
 	size = max_pfn - min_low_pfn;
 
-	if (memblock.memory.cnt > 1) {
+	if (size <= PFN_DOWN(SSEG_SIZE - PHYS_OFFSET_OFFSET))
+		zone_size[ZONE_NORMAL] = size;
+	else if (size < PFN_DOWN(LOWMEM_LIMIT - PHYS_OFFSET_OFFSET)) {
 		zone_size[ZONE_NORMAL] =
-			PFN_DOWN(memblock_start_of_REG1()) - min_low_pfn;
-		zhole_size[ZONE_NORMAL] =
-			PFN_DOWN(memblock_start_of_REG1()) - max_low_pfn;
+				PFN_DOWN(SSEG_SIZE - PHYS_OFFSET_OFFSET);
+		max_low_pfn = min_low_pfn + zone_size[ZONE_NORMAL];
 	} else {
-		if (size <= PFN_DOWN(LOWMEM_LIMIT - PHYS_OFFSET_OFFSET))
-			zone_size[ZONE_NORMAL] = max_pfn - min_low_pfn;
-		else {
 		zone_size[ZONE_NORMAL] =
 				PFN_DOWN(LOWMEM_LIMIT - PHYS_OFFSET_OFFSET);
 		max_low_pfn = min_low_pfn + zone_size[ZONE_NORMAL];
-		}
+		write_mmu_msa1(read_mmu_msa0() + SSEG_SIZE);
 	}
 
 #ifdef CONFIG_HIGHMEM
-	size = 0;
-	if (memblock.memory.cnt > 1) {
-		size = PFN_DOWN(memblock_size_of_REG1());
-		highstart_pfn = PFN_DOWN(memblock_start_of_REG1());
-	} else {
-		size = max_pfn - min_low_pfn -
-			PFN_DOWN(LOWMEM_LIMIT - PHYS_OFFSET_OFFSET);
-		highstart_pfn =  min_low_pfn +
-			PFN_DOWN(LOWMEM_LIMIT - PHYS_OFFSET_OFFSET);
-	}
-
-	if (size > 0)
-		zone_size[ZONE_HIGHMEM] = size;
+	zone_size[ZONE_HIGHMEM] = max_pfn - max_low_pfn;
 
+	highstart_pfn = max_low_pfn;
 	highend_pfn   = max_pfn;
 #endif
 	memblock_set_current_limit(PFN_PHYS(max_low_pfn));
 
 	dma_contiguous_reserve(0);
 
-	free_area_init_node(0, zone_size, min_low_pfn, zhole_size);
+	free_area_init_node(0, zone_size, min_low_pfn, NULL);
 }
 
 void __init setup_arch(char **cmdline_p)

arch/csky/kernel/smp.c

@@ -159,6 +159,8 @@ volatile unsigned int secondary_hint;
 volatile unsigned int secondary_ccr;
 volatile unsigned int secondary_stack;
 
+unsigned long secondary_msa1;
+
 int __cpu_up(unsigned int cpu, struct task_struct *tidle)
 {
 	unsigned long mask = 1 << cpu;
@@ -167,6 +169,7 @@ int __cpu_up(unsigned int cpu, struct task_struct *tidle)
 		(unsigned int) task_stack_page(tidle) + THREAD_SIZE - 8;
 	secondary_hint = mfcr("cr31");
 	secondary_ccr  = mfcr("cr18");
+	secondary_msa1 = read_mmu_msa1();
 
 	/*
 	 * Because other CPUs are in reset status, we must flush data