Skip to content

L
linux
Commit af30d4f3 authored by Laurent Pinchart's avatar Laurent Pinchart Committed by Mauro Carvalho Chehab
Browse files
Options

media: ti-vpe: cal: Split CAMERARX handling to cal-camerarx.c 

Implementation of media controller centric device configuration will add
code to the CAMERARX support section, which is already quite big. Move
it to a separate file to make the code more manageable. No functional
change is included.

The cal_camerarx_init_regmap() function is kept in cal.c and renamed to
cal_init_camerarx_regmap() as it's not specific to one CAMERARX
instance, but related to the whole CAL device.
Signed-off-by: default avatarLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: default avatarBenoit Parrot <bparrot@ti.com>
Signed-off-by: default avatarHans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab+huawei@kernel.org>
parent d373018f
Show whitespace changes
Inline Side-by-side
Showing with 713 additions and 682 deletions
drivers/media/platform/ti-vpe/Makefile
View file @ af30d4f3
...@@ -13,4 +13,4 @@ ccflags-$(CONFIG_VIDEO_TI_VPE_DEBUG) += -DDEBUG ...@@ -13,4 +13,4 @@ ccflags-$(CONFIG_VIDEO_TI_VPE_DEBUG) += -DDEBUG
obj-$(CONFIG_VIDEO_TI_CAL) += ti-cal.o obj-$(CONFIG_VIDEO_TI_CAL) += ti-cal.o
ti-cal-y := cal.o cal-video.o ti-cal-y := cal.o cal-camerarx.o cal-video.o
drivers/media/platform/ti-vpe/cal-camerarx.c 0 → 100644
View file @ af30d4f3
// SPDX-License-Identifier: GPL-2.0-only
/*
* TI Camera Access Layer (CAL) - CAMERARX
*
* Copyright (c) 2015-2020 Texas Instruments Inc.
*
* Authors:
* Benoit Parrot <bparrot@ti.com>
* Laurent Pinchart <laurent.pinchart@ideasonboard.com>
*/
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/mfd/syscon.h>
#include <linux/module.h>
#include <linux/of_graph.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/slab.h>
#include <media/v4l2-ctrls.h>
#include <media/v4l2-fwnode.h>
#include <media/v4l2-subdev.h>
#include "cal.h"
#include "cal_regs.h"
/* ------------------------------------------------------------------
* I/O Register Accessors
* ------------------------------------------------------------------
*/
static inline u32 camerarx_read(struct cal_camerarx *phy, u32 offset)
{
return ioread32(phy->base + offset);
}
static inline void camerarx_write(struct cal_camerarx *phy, u32 offset, u32 val)
{
iowrite32(val, phy->base + offset);
}
/* ------------------------------------------------------------------
* CAMERARX Management
* ------------------------------------------------------------------
*/
static s64 cal_camerarx_get_external_rate(struct cal_camerarx *phy)
{
struct v4l2_ctrl *ctrl;
s64 rate;
ctrl = v4l2_ctrl_find(phy->sensor->ctrl_handler, V4L2_CID_PIXEL_RATE);
if (!ctrl) {
phy_err(phy, "no pixel rate control in subdev: %s\n",
phy->sensor->name);
return -EPIPE;
}
rate = v4l2_ctrl_g_ctrl_int64(ctrl);
phy_dbg(3, phy, "sensor Pixel Rate: %llu\n", rate);
return rate;
}
static void cal_camerarx_lane_config(struct cal_camerarx *phy)
{
u32 val = cal_read(phy->cal, CAL_CSI2_COMPLEXIO_CFG(phy->instance));
u32 lane_mask = CAL_CSI2_COMPLEXIO_CFG_CLOCK_POSITION_MASK;
u32 polarity_mask = CAL_CSI2_COMPLEXIO_CFG_CLOCK_POL_MASK;
struct v4l2_fwnode_bus_mipi_csi2 *mipi_csi2 =
&phy->endpoint.bus.mipi_csi2;
int lane;
cal_set_field(&val, mipi_csi2->clock_lane + 1, lane_mask);
cal_set_field(&val, mipi_csi2->lane_polarities[0], polarity_mask);
for (lane = 0; lane < mipi_csi2->num_data_lanes; lane++) {
/*
* Every lane are one nibble apart starting with the
* clock followed by the data lanes so shift masks by 4.
*/
lane_mask <<= 4;
polarity_mask <<= 4;
cal_set_field(&val, mipi_csi2->data_lanes[lane] + 1, lane_mask);
cal_set_field(&val, mipi_csi2->lane_polarities[lane + 1],
polarity_mask);
}
cal_write(phy->cal, CAL_CSI2_COMPLEXIO_CFG(phy->instance), val);
phy_dbg(3, phy, "CAL_CSI2_COMPLEXIO_CFG(%d) = 0x%08x\n",
phy->instance, val);
}
static void cal_camerarx_enable(struct cal_camerarx *phy)
{
u32 num_lanes = phy->cal->data->camerarx[phy->instance].num_lanes;
regmap_field_write(phy->fields[F_CAMMODE], 0);
/* Always enable all lanes at the phy control level */
regmap_field_write(phy->fields[F_LANEENABLE], (1 << num_lanes) - 1);
/* F_CSI_MODE is not present on every architecture */
if (phy->fields[F_CSI_MODE])
regmap_field_write(phy->fields[F_CSI_MODE], 1);
regmap_field_write(phy->fields[F_CTRLCLKEN], 1);
}
void cal_camerarx_disable(struct cal_camerarx *phy)
{
regmap_field_write(phy->fields[F_CTRLCLKEN], 0);
}
/*
* TCLK values are OK at their reset values
*/
#define TCLK_TERM 0
#define TCLK_MISS 1
#define TCLK_SETTLE 14
static void cal_camerarx_config(struct cal_camerarx *phy, s64 external_rate,
const struct cal_fmt *fmt)
{
unsigned int reg0, reg1;
unsigned int ths_term, ths_settle;
unsigned int csi2_ddrclk_khz;
struct v4l2_fwnode_bus_mipi_csi2 *mipi_csi2 =
&phy->endpoint.bus.mipi_csi2;
u32 num_lanes = mipi_csi2->num_data_lanes;
/* DPHY timing configuration */
/*
* CSI-2 is DDR and we only count used lanes.
*
* csi2_ddrclk_khz = external_rate / 1000
* / (2 * num_lanes) * fmt->bpp;
*/
csi2_ddrclk_khz = div_s64(external_rate * fmt->bpp,
2 * num_lanes * 1000);
phy_dbg(1, phy, "csi2_ddrclk_khz: %d\n", csi2_ddrclk_khz);
/* THS_TERM: Programmed value = floor(20 ns/DDRClk period) */
ths_term = 20 * csi2_ddrclk_khz / 1000000;
phy_dbg(1, phy, "ths_term: %d (0x%02x)\n", ths_term, ths_term);
/* THS_SETTLE: Programmed value = floor(105 ns/DDRClk period) + 4 */
ths_settle = (105 * csi2_ddrclk_khz / 1000000) + 4;
phy_dbg(1, phy, "ths_settle: %d (0x%02x)\n", ths_settle, ths_settle);
reg0 = camerarx_read(phy, CAL_CSI2_PHY_REG0);
cal_set_field(&reg0, CAL_CSI2_PHY_REG0_HSCLOCKCONFIG_DISABLE,
CAL_CSI2_PHY_REG0_HSCLOCKCONFIG_MASK);
cal_set_field(&reg0, ths_term, CAL_CSI2_PHY_REG0_THS_TERM_MASK);
cal_set_field(&reg0, ths_settle, CAL_CSI2_PHY_REG0_THS_SETTLE_MASK);
phy_dbg(1, phy, "CSI2_%d_REG0 = 0x%08x\n", phy->instance, reg0);
camerarx_write(phy, CAL_CSI2_PHY_REG0, reg0);
reg1 = camerarx_read(phy, CAL_CSI2_PHY_REG1);
cal_set_field(&reg1, TCLK_TERM, CAL_CSI2_PHY_REG1_TCLK_TERM_MASK);
cal_set_field(&reg1, 0xb8, CAL_CSI2_PHY_REG1_DPHY_HS_SYNC_PATTERN_MASK);
cal_set_field(&reg1, TCLK_MISS,
CAL_CSI2_PHY_REG1_CTRLCLK_DIV_FACTOR_MASK);
cal_set_field(&reg1, TCLK_SETTLE, CAL_CSI2_PHY_REG1_TCLK_SETTLE_MASK);
phy_dbg(1, phy, "CSI2_%d_REG1 = 0x%08x\n", phy->instance, reg1);
camerarx_write(phy, CAL_CSI2_PHY_REG1, reg1);
}
static void cal_camerarx_power(struct cal_camerarx *phy, bool enable)
{
u32 target_state;
unsigned int i;
target_state = enable ? CAL_CSI2_COMPLEXIO_CFG_PWR_CMD_STATE_ON :
CAL_CSI2_COMPLEXIO_CFG_PWR_CMD_STATE_OFF;
cal_write_field(phy->cal, CAL_CSI2_COMPLEXIO_CFG(phy->instance),
target_state, CAL_CSI2_COMPLEXIO_CFG_PWR_CMD_MASK);
for (i = 0; i < 10; i++) {
u32 current_state;
current_state = cal_read_field(phy->cal,
CAL_CSI2_COMPLEXIO_CFG(phy->instance),
CAL_CSI2_COMPLEXIO_CFG_PWR_STATUS_MASK);
if (current_state == target_state)
break;
usleep_range(1000, 1100);
}
if (i == 10)
phy_err(phy, "Failed to power %s complexio\n",
enable ? "up" : "down");
}
static void cal_camerarx_wait_reset(struct cal_camerarx *phy)
{
unsigned long timeout;
timeout = jiffies + msecs_to_jiffies(750);
while (time_before(jiffies, timeout)) {
if (cal_read_field(phy->cal,
CAL_CSI2_COMPLEXIO_CFG(phy->instance),
CAL_CSI2_COMPLEXIO_CFG_RESET_DONE_MASK) ==
CAL_CSI2_COMPLEXIO_CFG_RESET_DONE_RESETCOMPLETED)
break;
usleep_range(500, 5000);
}
if (cal_read_field(phy->cal, CAL_CSI2_COMPLEXIO_CFG(phy->instance),
CAL_CSI2_COMPLEXIO_CFG_RESET_DONE_MASK) !=
CAL_CSI2_COMPLEXIO_CFG_RESET_DONE_RESETCOMPLETED)
phy_err(phy, "Timeout waiting for Complex IO reset done\n");
}
static void cal_camerarx_wait_stop_state(struct cal_camerarx *phy)
{
unsigned long timeout;
timeout = jiffies + msecs_to_jiffies(750);
while (time_before(jiffies, timeout)) {
if (cal_read_field(phy->cal,
CAL_CSI2_TIMING(phy->instance),
CAL_CSI2_TIMING_FORCE_RX_MODE_IO1_MASK) == 0)
break;
usleep_range(500, 5000);
}
if (cal_read_field(phy->cal, CAL_CSI2_TIMING(phy->instance),
CAL_CSI2_TIMING_FORCE_RX_MODE_IO1_MASK) != 0)
phy_err(phy, "Timeout waiting for stop state\n");
}
int cal_camerarx_start(struct cal_camerarx *phy, const struct cal_fmt *fmt)
{
s64 external_rate;
u32 sscounter;
u32 val;
int ret;
external_rate = cal_camerarx_get_external_rate(phy);
if (external_rate < 0)
return external_rate;
ret = v4l2_subdev_call(phy->sensor, core, s_power, 1);
if (ret < 0 && ret != -ENOIOCTLCMD && ret != -ENODEV) {
phy_err(phy, "power on failed in subdev\n");
return ret;
}
/*
* CSI-2 PHY Link Initialization Sequence, according to the DRA74xP /
* DRA75xP / DRA76xP / DRA77xP TRM. The DRA71x / DRA72x and the AM65x /
* DRA80xM TRMs have a a slightly simplified sequence.
*/
/*
* 1. Configure all CSI-2 low level protocol registers to be ready to
* receive signals/data from the CSI-2 PHY.
*
* i.-v. Configure the lanes position and polarity.
*/
cal_camerarx_lane_config(phy);
/*
* vi.-vii. Configure D-PHY mode, enable the required lanes and
* enable the CAMERARX clock.
*/
cal_camerarx_enable(phy);
/*
* 2. CSI PHY and link initialization sequence.
*
* a. Deassert the CSI-2 PHY reset. Do not wait for reset completion
* at this point, as it requires the external sensor to send the
* CSI-2 HS clock.
*/
cal_write_field(phy->cal, CAL_CSI2_COMPLEXIO_CFG(phy->instance),
CAL_CSI2_COMPLEXIO_CFG_RESET_CTRL_OPERATIONAL,
CAL_CSI2_COMPLEXIO_CFG_RESET_CTRL_MASK);
phy_dbg(3, phy, "CAL_CSI2_COMPLEXIO_CFG(%d) = 0x%08x De-assert Complex IO Reset\n",
phy->instance,
cal_read(phy->cal, CAL_CSI2_COMPLEXIO_CFG(phy->instance)));
/* Dummy read to allow SCP reset to complete. */
camerarx_read(phy, CAL_CSI2_PHY_REG0);
/* Program the PHY timing parameters. */
cal_camerarx_config(phy, external_rate, fmt);
/*
* b. Assert the FORCERXMODE signal.
*
* The stop-state-counter is based on fclk cycles, and we always use
* the x16 and x4 settings, so stop-state-timeout =
* fclk-cycle * 16 * 4 * counter.
*
* Stop-state-timeout must be more than 100us as per CSI-2 spec, so we
* calculate a timeout that's 100us (rounding up).
*/
sscounter = DIV_ROUND_UP(clk_get_rate(phy->cal->fclk), 10000 * 16 * 4);
val = cal_read(phy->cal, CAL_CSI2_TIMING(phy->instance));
cal_set_field(&val, 1, CAL_CSI2_TIMING_STOP_STATE_X16_IO1_MASK);
cal_set_field(&val, 1, CAL_CSI2_TIMING_STOP_STATE_X4_IO1_MASK);
cal_set_field(&val, sscounter,
CAL_CSI2_TIMING_STOP_STATE_COUNTER_IO1_MASK);
cal_write(phy->cal, CAL_CSI2_TIMING(phy->instance), val);
phy_dbg(3, phy, "CAL_CSI2_TIMING(%d) = 0x%08x Stop States\n",
phy->instance,
cal_read(phy->cal, CAL_CSI2_TIMING(phy->instance)));
/* Assert the FORCERXMODE signal. */
cal_write_field(phy->cal, CAL_CSI2_TIMING(phy->instance),
1, CAL_CSI2_TIMING_FORCE_RX_MODE_IO1_MASK);
phy_dbg(3, phy, "CAL_CSI2_TIMING(%d) = 0x%08x Force RXMODE\n",
phy->instance,
cal_read(phy->cal, CAL_CSI2_TIMING(phy->instance)));
/*
* c. Connect pull-down on CSI-2 PHY link (using pad control).
*
* This is not required on DRA71x, DRA72x, AM65x and DRA80xM. Not
* implemented.
*/
/*
* d. Power up the CSI-2 PHY.
* e. Check whether the state status reaches the ON state.
*/
cal_camerarx_power(phy, true);
/*
* Start the sensor to enable the CSI-2 HS clock. We can now wait for
* CSI-2 PHY reset to complete.
*/
ret = v4l2_subdev_call(phy->sensor, video, s_stream, 1);
if (ret) {
v4l2_subdev_call(phy->sensor, core, s_power, 0);
phy_err(phy, "stream on failed in subdev\n");
return ret;
}
cal_camerarx_wait_reset(phy);
/* f. Wait for STOPSTATE=1 for all enabled lane modules. */
cal_camerarx_wait_stop_state(phy);
phy_dbg(1, phy, "CSI2_%u_REG1 = 0x%08x (bits 31-28 should be set)\n",
phy->instance, camerarx_read(phy, CAL_CSI2_PHY_REG1));
/*
* g. Disable pull-down on CSI-2 PHY link (using pad control).
*
* This is not required on DRA71x, DRA72x, AM65x and DRA80xM. Not
* implemented.
*/
return 0;
}
void cal_camerarx_stop(struct cal_camerarx *phy)
{
unsigned int i;
int ret;
cal_camerarx_power(phy, false);
/* Assert Complex IO Reset */
cal_write_field(phy->cal, CAL_CSI2_COMPLEXIO_CFG(phy->instance),
CAL_CSI2_COMPLEXIO_CFG_RESET_CTRL,
CAL_CSI2_COMPLEXIO_CFG_RESET_CTRL_MASK);
/* Wait for power down completion */
for (i = 0; i < 10; i++) {
if (cal_read_field(phy->cal,
CAL_CSI2_COMPLEXIO_CFG(phy->instance),
CAL_CSI2_COMPLEXIO_CFG_RESET_DONE_MASK) ==
CAL_CSI2_COMPLEXIO_CFG_RESET_DONE_RESETONGOING)
break;
usleep_range(1000, 1100);
}
phy_dbg(3, phy, "CAL_CSI2_COMPLEXIO_CFG(%d) = 0x%08x Complex IO in Reset (%d) %s\n",
phy->instance,
cal_read(phy->cal, CAL_CSI2_COMPLEXIO_CFG(phy->instance)), i,
(i >= 10) ? "(timeout)" : "");
/* Disable the phy */
cal_camerarx_disable(phy);
if (v4l2_subdev_call(phy->sensor, video, s_stream, 0))
phy_err(phy, "stream off failed in subdev\n");
ret = v4l2_subdev_call(phy->sensor, core, s_power, 0);
if (ret < 0 && ret != -ENOIOCTLCMD && ret != -ENODEV)
phy_err(phy, "power off failed in subdev\n");
}
/*
* Errata i913: CSI2 LDO Needs to be disabled when module is powered on
*
* Enabling CSI2 LDO shorts it to core supply. It is crucial the 2 CSI2
* LDOs on the device are disabled if CSI-2 module is powered on
* (0x4845 B304 | 0x4845 B384 [28:27] = 0x1) or in ULPS (0x4845 B304
* | 0x4845 B384 [28:27] = 0x2) mode. Common concerns include: high
* current draw on the module supply in active mode.
*
* Errata does not apply when CSI-2 module is powered off
* (0x4845 B304 | 0x4845 B384 [28:27] = 0x0).
*
* SW Workaround:
* Set the following register bits to disable the LDO,
* which is essentially CSI2 REG10 bit 6:
*
* Core 0: 0x4845 B828 = 0x0000 0040
* Core 1: 0x4845 B928 = 0x0000 0040
*/
void cal_camerarx_i913_errata(struct cal_camerarx *phy)
{
u32 reg10 = camerarx_read(phy, CAL_CSI2_PHY_REG10);
cal_set_field(&reg10, 1, CAL_CSI2_PHY_REG10_I933_LDO_DISABLE_MASK);
phy_dbg(1, phy, "CSI2_%d_REG10 = 0x%08x\n", phy->instance, reg10);
camerarx_write(phy, CAL_CSI2_PHY_REG10, reg10);
}
/*
* Enable the expected IRQ sources
*/
void cal_camerarx_enable_irqs(struct cal_camerarx *phy)
{
u32 val;
const u32 cio_err_mask =
CAL_CSI2_COMPLEXIO_IRQ_LANE_ERRORS_MASK |
CAL_CSI2_COMPLEXIO_IRQ_FIFO_OVR_MASK |
CAL_CSI2_COMPLEXIO_IRQ_SHORT_PACKET_MASK |
CAL_CSI2_COMPLEXIO_IRQ_ECC_NO_CORRECTION_MASK;
/* Enable CIO error irqs */
cal_write(phy->cal, CAL_HL_IRQENABLE_SET(0),
CAL_HL_IRQ_CIO_MASK(phy->instance));
cal_write(phy->cal, CAL_CSI2_COMPLEXIO_IRQENABLE(phy->instance),
cio_err_mask);
/* Always enable OCPO error */
cal_write(phy->cal, CAL_HL_IRQENABLE_SET(0), CAL_HL_IRQ_OCPO_ERR_MASK);
/* Enable IRQ_WDMA_END 0/1 */
val = 0;
cal_set_field(&val, 1, CAL_HL_IRQ_MASK(phy->instance));
cal_write(phy->cal, CAL_HL_IRQENABLE_SET(1), val);
/* Enable IRQ_WDMA_START 0/1 */
val = 0;
cal_set_field(&val, 1, CAL_HL_IRQ_MASK(phy->instance));
cal_write(phy->cal, CAL_HL_IRQENABLE_SET(2), val);
/* Todo: Add VC_IRQ and CSI2_COMPLEXIO_IRQ handling */
cal_write(phy->cal, CAL_CSI2_VC_IRQENABLE(0), 0xFF000000);
}
void cal_camerarx_disable_irqs(struct cal_camerarx *phy)
{
u32 val;
/* Disable CIO error irqs */
cal_write(phy->cal, CAL_HL_IRQENABLE_CLR(0),
CAL_HL_IRQ_CIO_MASK(phy->instance));
cal_write(phy->cal, CAL_CSI2_COMPLEXIO_IRQENABLE(phy->instance), 0);
/* Disable IRQ_WDMA_END 0/1 */
val = 0;
cal_set_field(&val, 1, CAL_HL_IRQ_MASK(phy->instance));
cal_write(phy->cal, CAL_HL_IRQENABLE_CLR(1), val);
/* Disable IRQ_WDMA_START 0/1 */
val = 0;
cal_set_field(&val, 1, CAL_HL_IRQ_MASK(phy->instance));
cal_write(phy->cal, CAL_HL_IRQENABLE_CLR(2), val);
/* Todo: Add VC_IRQ and CSI2_COMPLEXIO_IRQ handling */
cal_write(phy->cal, CAL_CSI2_VC_IRQENABLE(0), 0);
}
void cal_camerarx_ppi_enable(struct cal_camerarx *phy)
{
cal_write(phy->cal, CAL_CSI2_PPI_CTRL(phy->instance), BIT(3));
cal_write_field(phy->cal, CAL_CSI2_PPI_CTRL(phy->instance),
1, CAL_CSI2_PPI_CTRL_IF_EN_MASK);
}
void cal_camerarx_ppi_disable(struct cal_camerarx *phy)
{
cal_write_field(phy->cal, CAL_CSI2_PPI_CTRL(phy->instance),
0, CAL_CSI2_PPI_CTRL_IF_EN_MASK);
}
static int cal_camerarx_regmap_init(struct cal_dev *cal,
struct cal_camerarx *phy)
{
const struct cal_camerarx_data *phy_data;
unsigned int i;
if (!cal->data)
return -EINVAL;
phy_data = &cal->data->camerarx[phy->instance];
for (i = 0; i < F_MAX_FIELDS; i++) {
struct reg_field field = {
.reg = cal->syscon_camerrx_offset,
.lsb = phy_data->fields[i].lsb,
.msb = phy_data->fields[i].msb,
};
/*
* Here we update the reg offset with the
* value found in DT
*/
phy->fields[i] = devm_regmap_field_alloc(cal->dev,
cal->syscon_camerrx,
field);
if (IS_ERR(phy->fields[i])) {
cal_err(cal, "Unable to allocate regmap fields\n");
return PTR_ERR(phy->fields[i]);
}
}
return 0;
}
static int cal_camerarx_parse_dt(struct cal_camerarx *phy)
{
struct v4l2_fwnode_endpoint *endpoint = &phy->endpoint;
struct device_node *ep_node;
char data_lanes[V4L2_FWNODE_CSI2_MAX_DATA_LANES * 2];
unsigned int i;
int ret;
/*
* Find the endpoint node for the port corresponding to the PHY
* instance, and parse its CSI-2-related properties.
*/
ep_node = of_graph_get_endpoint_by_regs(phy->cal->dev->of_node,
phy->instance, 0);
if (!ep_node) {
/*
* The endpoint is not mandatory, not all PHY instances need to
* be connected in DT.
*/
phy_dbg(3, phy, "Port has no endpoint\n");
return 0;
}
endpoint->bus_type = V4L2_MBUS_CSI2_DPHY;
ret = v4l2_fwnode_endpoint_parse(of_fwnode_handle(ep_node), endpoint);
if (ret < 0) {
phy_err(phy, "Failed to parse endpoint\n");
goto done;
}
for (i = 0; i < endpoint->bus.mipi_csi2.num_data_lanes; i++) {
unsigned int lane = endpoint->bus.mipi_csi2.data_lanes[i];
if (lane > 4) {
phy_err(phy, "Invalid position %u for data lane %u\n",
lane, i);
ret = -EINVAL;
goto done;
}
data_lanes[i*2] = '0' + lane;
data_lanes[i*2+1] = ' ';
}
data_lanes[i*2-1] = '\0';
phy_dbg(3, phy,
"CSI-2 bus: clock lane <%u>, data lanes <%s>, flags 0x%08x\n",
endpoint->bus.mipi_csi2.clock_lane, data_lanes,
endpoint->bus.mipi_csi2.flags);
/* Retrieve the connected device and store it for later use. */
phy->sensor_node = of_graph_get_remote_port_parent(ep_node);
if (!phy->sensor_node) {
phy_dbg(3, phy, "Can't get remote parent\n");
ret = -EINVAL;
goto done;
}
phy_dbg(1, phy, "Found connected device %pOFn\n", phy->sensor_node);
done:
of_node_put(ep_node);
return ret;
}
struct cal_camerarx *cal_camerarx_create(struct cal_dev *cal,
unsigned int instance)
{
struct platform_device *pdev = to_platform_device(cal->dev);
struct cal_camerarx *phy;
int ret;
phy = kzalloc(sizeof(*phy), GFP_KERNEL);
if (!phy)
return ERR_PTR(-ENOMEM);
phy->cal = cal;
phy->instance = instance;
phy->res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
(instance == 0) ?
"cal_rx_core0" :
"cal_rx_core1");
phy->base = devm_ioremap_resource(cal->dev, phy->res);
if (IS_ERR(phy->base)) {
cal_err(cal, "failed to ioremap\n");
ret = PTR_ERR(phy->base);
goto error;
}
cal_dbg(1, cal, "ioresource %s at %pa - %pa\n",
phy->res->name, &phy->res->start, &phy->res->end);
ret = cal_camerarx_regmap_init(cal, phy);
if (ret)
goto error;
ret = cal_camerarx_parse_dt(phy);
if (ret)
goto error;
return phy;
error:
kfree(phy);
return ERR_PTR(ret);
}
void cal_camerarx_destroy(struct cal_camerarx *phy)
{
if (!phy)
return;
of_node_put(phy->sensor_node);
kfree(phy);
}
drivers/media/platform/ti-vpe/cal.c
View file @ af30d4f3
...@@ -10,12 +10,10 @@ ...@@ -10,12 +10,10 @@
*/ */
#include <linux/clk.h> #include <linux/clk.h>
#include <linux/delay.h>
#include <linux/interrupt.h> #include <linux/interrupt.h>
#include <linux/mfd/syscon.h> #include <linux/mfd/syscon.h>
#include <linux/module.h> #include <linux/module.h>
#include <linux/of_device.h> #include <linux/of_device.h>
#include <linux/of_graph.h>
#include <linux/platform_device.h> #include <linux/platform_device.h>
#include <linux/pm_runtime.h> #include <linux/pm_runtime.h>
#include <linux/regmap.h> #include <linux/regmap.h>
...@@ -25,9 +23,7 @@ ...@@ -25,9 +23,7 @@
#include <media/media-device.h> #include <media/media-device.h>
#include <media/v4l2-async.h> #include <media/v4l2-async.h>
#include <media/v4l2-common.h> #include <media/v4l2-common.h>
#include <media/v4l2-ctrls.h>
#include <media/v4l2-device.h> #include <media/v4l2-device.h>
#include <media/v4l2-fwnode.h>
#include <media/videobuf2-core.h> #include <media/videobuf2-core.h>
#include <media/videobuf2-dma-contig.h> #include <media/videobuf2-dma-contig.h>
...@@ -155,682 +151,6 @@ void cal_quickdump_regs(struct cal_dev *cal) ...@@ -155,682 +151,6 @@ void cal_quickdump_regs(struct cal_dev *cal)
} }
} }
/* ------------------------------------------------------------------
* CAMERARX Management
* ------------------------------------------------------------------
*/
static inline u32 camerarx_read(struct cal_camerarx *phy, u32 offset)
{
return ioread32(phy->base + offset);
}
static inline void camerarx_write(struct cal_camerarx *phy, u32 offset, u32 val)
{
iowrite32(val, phy->base + offset);
}
static s64 cal_camerarx_get_external_rate(struct cal_camerarx *phy)
{
struct v4l2_ctrl *ctrl;
s64 rate;
ctrl = v4l2_ctrl_find(phy->sensor->ctrl_handler, V4L2_CID_PIXEL_RATE);
if (!ctrl) {
phy_err(phy, "no pixel rate control in subdev: %s\n",
phy->sensor->name);
return -EPIPE;
}
rate = v4l2_ctrl_g_ctrl_int64(ctrl);
phy_dbg(3, phy, "sensor Pixel Rate: %llu\n", rate);
return rate;
}
static void cal_camerarx_lane_config(struct cal_camerarx *phy)
{
u32 val = cal_read(phy->cal, CAL_CSI2_COMPLEXIO_CFG(phy->instance));
u32 lane_mask = CAL_CSI2_COMPLEXIO_CFG_CLOCK_POSITION_MASK;
u32 polarity_mask = CAL_CSI2_COMPLEXIO_CFG_CLOCK_POL_MASK;
struct v4l2_fwnode_bus_mipi_csi2 *mipi_csi2 =
&phy->endpoint.bus.mipi_csi2;
int lane;
cal_set_field(&val, mipi_csi2->clock_lane + 1, lane_mask);
cal_set_field(&val, mipi_csi2->lane_polarities[0], polarity_mask);
for (lane = 0; lane < mipi_csi2->num_data_lanes; lane++) {
/*
* Every lane are one nibble apart starting with the
* clock followed by the data lanes so shift masks by 4.
*/
lane_mask <<= 4;
polarity_mask <<= 4;
cal_set_field(&val, mipi_csi2->data_lanes[lane] + 1, lane_mask);
cal_set_field(&val, mipi_csi2->lane_polarities[lane + 1],
polarity_mask);
}
cal_write(phy->cal, CAL_CSI2_COMPLEXIO_CFG(phy->instance), val);
phy_dbg(3, phy, "CAL_CSI2_COMPLEXIO_CFG(%d) = 0x%08x\n",
phy->instance, val);
}
static void cal_camerarx_enable(struct cal_camerarx *phy)
{
u32 num_lanes = phy->cal->data->camerarx[phy->instance].num_lanes;
regmap_field_write(phy->fields[F_CAMMODE], 0);
/* Always enable all lanes at the phy control level */
regmap_field_write(phy->fields[F_LANEENABLE], (1 << num_lanes) - 1);
/* F_CSI_MODE is not present on every architecture */
if (phy->fields[F_CSI_MODE])
regmap_field_write(phy->fields[F_CSI_MODE], 1);
regmap_field_write(phy->fields[F_CTRLCLKEN], 1);
}
static void cal_camerarx_disable(struct cal_camerarx *phy)
{
regmap_field_write(phy->fields[F_CTRLCLKEN], 0);
}
/*
* TCLK values are OK at their reset values
*/
#define TCLK_TERM 0
#define TCLK_MISS 1
#define TCLK_SETTLE 14
static void cal_camerarx_config(struct cal_camerarx *phy, s64 external_rate,
const struct cal_fmt *fmt)
{
unsigned int reg0, reg1;
unsigned int ths_term, ths_settle;
unsigned int csi2_ddrclk_khz;
struct v4l2_fwnode_bus_mipi_csi2 *mipi_csi2 =
&phy->endpoint.bus.mipi_csi2;
u32 num_lanes = mipi_csi2->num_data_lanes;
/* DPHY timing configuration */
/*
* CSI-2 is DDR and we only count used lanes.
*
* csi2_ddrclk_khz = external_rate / 1000
* / (2 * num_lanes) * fmt->bpp;
*/
csi2_ddrclk_khz = div_s64(external_rate * fmt->bpp,
2 * num_lanes * 1000);
phy_dbg(1, phy, "csi2_ddrclk_khz: %d\n", csi2_ddrclk_khz);
/* THS_TERM: Programmed value = floor(20 ns/DDRClk period) */
ths_term = 20 * csi2_ddrclk_khz / 1000000;
phy_dbg(1, phy, "ths_term: %d (0x%02x)\n", ths_term, ths_term);
/* THS_SETTLE: Programmed value = floor(105 ns/DDRClk period) + 4 */
ths_settle = (105 * csi2_ddrclk_khz / 1000000) + 4;
phy_dbg(1, phy, "ths_settle: %d (0x%02x)\n", ths_settle, ths_settle);
reg0 = camerarx_read(phy, CAL_CSI2_PHY_REG0);
cal_set_field(&reg0, CAL_CSI2_PHY_REG0_HSCLOCKCONFIG_DISABLE,
CAL_CSI2_PHY_REG0_HSCLOCKCONFIG_MASK);
cal_set_field(&reg0, ths_term, CAL_CSI2_PHY_REG0_THS_TERM_MASK);
cal_set_field(&reg0, ths_settle, CAL_CSI2_PHY_REG0_THS_SETTLE_MASK);
phy_dbg(1, phy, "CSI2_%d_REG0 = 0x%08x\n", phy->instance, reg0);
camerarx_write(phy, CAL_CSI2_PHY_REG0, reg0);
reg1 = camerarx_read(phy, CAL_CSI2_PHY_REG1);
cal_set_field(&reg1, TCLK_TERM, CAL_CSI2_PHY_REG1_TCLK_TERM_MASK);
cal_set_field(&reg1, 0xb8, CAL_CSI2_PHY_REG1_DPHY_HS_SYNC_PATTERN_MASK);
cal_set_field(&reg1, TCLK_MISS,
CAL_CSI2_PHY_REG1_CTRLCLK_DIV_FACTOR_MASK);
cal_set_field(&reg1, TCLK_SETTLE, CAL_CSI2_PHY_REG1_TCLK_SETTLE_MASK);
phy_dbg(1, phy, "CSI2_%d_REG1 = 0x%08x\n", phy->instance, reg1);
camerarx_write(phy, CAL_CSI2_PHY_REG1, reg1);
}
static void cal_camerarx_power(struct cal_camerarx *phy, bool enable)
{
u32 target_state;
unsigned int i;
target_state = enable ? CAL_CSI2_COMPLEXIO_CFG_PWR_CMD_STATE_ON :
CAL_CSI2_COMPLEXIO_CFG_PWR_CMD_STATE_OFF;
cal_write_field(phy->cal, CAL_CSI2_COMPLEXIO_CFG(phy->instance),
target_state, CAL_CSI2_COMPLEXIO_CFG_PWR_CMD_MASK);
for (i = 0; i < 10; i++) {
u32 current_state;
current_state = cal_read_field(phy->cal,
CAL_CSI2_COMPLEXIO_CFG(phy->instance),
CAL_CSI2_COMPLEXIO_CFG_PWR_STATUS_MASK);
if (current_state == target_state)
break;
usleep_range(1000, 1100);
}
if (i == 10)
phy_err(phy, "Failed to power %s complexio\n",
enable ? "up" : "down");
}
static void cal_camerarx_wait_reset(struct cal_camerarx *phy)
{
unsigned long timeout;
timeout = jiffies + msecs_to_jiffies(750);
while (time_before(jiffies, timeout)) {
if (cal_read_field(phy->cal,
CAL_CSI2_COMPLEXIO_CFG(phy->instance),
CAL_CSI2_COMPLEXIO_CFG_RESET_DONE_MASK) ==
CAL_CSI2_COMPLEXIO_CFG_RESET_DONE_RESETCOMPLETED)
break;
usleep_range(500, 5000);
}
if (cal_read_field(phy->cal, CAL_CSI2_COMPLEXIO_CFG(phy->instance),
CAL_CSI2_COMPLEXIO_CFG_RESET_DONE_MASK) !=
CAL_CSI2_COMPLEXIO_CFG_RESET_DONE_RESETCOMPLETED)
phy_err(phy, "Timeout waiting for Complex IO reset done\n");
}
static void cal_camerarx_wait_stop_state(struct cal_camerarx *phy)
{
unsigned long timeout;
timeout = jiffies + msecs_to_jiffies(750);
while (time_before(jiffies, timeout)) {
if (cal_read_field(phy->cal,
CAL_CSI2_TIMING(phy->instance),
CAL_CSI2_TIMING_FORCE_RX_MODE_IO1_MASK) == 0)
break;
usleep_range(500, 5000);
}
if (cal_read_field(phy->cal, CAL_CSI2_TIMING(phy->instance),
CAL_CSI2_TIMING_FORCE_RX_MODE_IO1_MASK) != 0)
phy_err(phy, "Timeout waiting for stop state\n");
}
int cal_camerarx_start(struct cal_camerarx *phy, const struct cal_fmt *fmt)
{
s64 external_rate;
u32 sscounter;
u32 val;
int ret;
external_rate = cal_camerarx_get_external_rate(phy);
if (external_rate < 0)
return external_rate;
ret = v4l2_subdev_call(phy->sensor, core, s_power, 1);
if (ret < 0 && ret != -ENOIOCTLCMD && ret != -ENODEV) {
phy_err(phy, "power on failed in subdev\n");
return ret;
}
/*
* CSI-2 PHY Link Initialization Sequence, according to the DRA74xP /
* DRA75xP / DRA76xP / DRA77xP TRM. The DRA71x / DRA72x and the AM65x /
* DRA80xM TRMs have a a slightly simplified sequence.
*/
/*
* 1. Configure all CSI-2 low level protocol registers to be ready to
* receive signals/data from the CSI-2 PHY.
*
* i.-v. Configure the lanes position and polarity.
*/
cal_camerarx_lane_config(phy);
/*
* vi.-vii. Configure D-PHY mode, enable the required lanes and
* enable the CAMERARX clock.
*/
cal_camerarx_enable(phy);
/*
* 2. CSI PHY and link initialization sequence.
*
* a. Deassert the CSI-2 PHY reset. Do not wait for reset completion
* at this point, as it requires the external sensor to send the
* CSI-2 HS clock.
*/
cal_write_field(phy->cal, CAL_CSI2_COMPLEXIO_CFG(phy->instance),
CAL_CSI2_COMPLEXIO_CFG_RESET_CTRL_OPERATIONAL,
CAL_CSI2_COMPLEXIO_CFG_RESET_CTRL_MASK);
phy_dbg(3, phy, "CAL_CSI2_COMPLEXIO_CFG(%d) = 0x%08x De-assert Complex IO Reset\n",
phy->instance,
cal_read(phy->cal, CAL_CSI2_COMPLEXIO_CFG(phy->instance)));
/* Dummy read to allow SCP reset to complete. */
camerarx_read(phy, CAL_CSI2_PHY_REG0);
/* Program the PHY timing parameters. */
cal_camerarx_config(phy, external_rate, fmt);
/*
* b. Assert the FORCERXMODE signal.
*
* The stop-state-counter is based on fclk cycles, and we always use
* the x16 and x4 settings, so stop-state-timeout =
* fclk-cycle * 16 * 4 * counter.
*
* Stop-state-timeout must be more than 100us as per CSI-2 spec, so we
* calculate a timeout that's 100us (rounding up).
*/
sscounter = DIV_ROUND_UP(clk_get_rate(phy->cal->fclk), 10000 * 16 * 4);
val = cal_read(phy->cal, CAL_CSI2_TIMING(phy->instance));
cal_set_field(&val, 1, CAL_CSI2_TIMING_STOP_STATE_X16_IO1_MASK);
cal_set_field(&val, 1, CAL_CSI2_TIMING_STOP_STATE_X4_IO1_MASK);
cal_set_field(&val, sscounter,
CAL_CSI2_TIMING_STOP_STATE_COUNTER_IO1_MASK);
cal_write(phy->cal, CAL_CSI2_TIMING(phy->instance), val);
phy_dbg(3, phy, "CAL_CSI2_TIMING(%d) = 0x%08x Stop States\n",
phy->instance,
cal_read(phy->cal, CAL_CSI2_TIMING(phy->instance)));
/* Assert the FORCERXMODE signal. */
cal_write_field(phy->cal, CAL_CSI2_TIMING(phy->instance),
1, CAL_CSI2_TIMING_FORCE_RX_MODE_IO1_MASK);
phy_dbg(3, phy, "CAL_CSI2_TIMING(%d) = 0x%08x Force RXMODE\n",
phy->instance,
cal_read(phy->cal, CAL_CSI2_TIMING(phy->instance)));
/*
* c. Connect pull-down on CSI-2 PHY link (using pad control).
*
* This is not required on DRA71x, DRA72x, AM65x and DRA80xM. Not
* implemented.
*/
/*
* d. Power up the CSI-2 PHY.
* e. Check whether the state status reaches the ON state.
*/
cal_camerarx_power(phy, true);
/*
* Start the sensor to enable the CSI-2 HS clock. We can now wait for
* CSI-2 PHY reset to complete.
*/
ret = v4l2_subdev_call(phy->sensor, video, s_stream, 1);
if (ret) {
v4l2_subdev_call(phy->sensor, core, s_power, 0);
phy_err(phy, "stream on failed in subdev\n");
return ret;
}
cal_camerarx_wait_reset(phy);
/* f. Wait for STOPSTATE=1 for all enabled lane modules. */
cal_camerarx_wait_stop_state(phy);
phy_dbg(1, phy, "CSI2_%u_REG1 = 0x%08x (bits 31-28 should be set)\n",
phy->instance, camerarx_read(phy, CAL_CSI2_PHY_REG1));
/*
* g. Disable pull-down on CSI-2 PHY link (using pad control).
*
* This is not required on DRA71x, DRA72x, AM65x and DRA80xM. Not
* implemented.
*/
return 0;
}
void cal_camerarx_stop(struct cal_camerarx *phy)
{
unsigned int i;
int ret;
cal_camerarx_power(phy, false);
/* Assert Complex IO Reset */
cal_write_field(phy->cal, CAL_CSI2_COMPLEXIO_CFG(phy->instance),
CAL_CSI2_COMPLEXIO_CFG_RESET_CTRL,
CAL_CSI2_COMPLEXIO_CFG_RESET_CTRL_MASK);
/* Wait for power down completion */
for (i = 0; i < 10; i++) {
if (cal_read_field(phy->cal,
CAL_CSI2_COMPLEXIO_CFG(phy->instance),
CAL_CSI2_COMPLEXIO_CFG_RESET_DONE_MASK) ==
CAL_CSI2_COMPLEXIO_CFG_RESET_DONE_RESETONGOING)
break;
usleep_range(1000, 1100);
}
phy_dbg(3, phy, "CAL_CSI2_COMPLEXIO_CFG(%d) = 0x%08x Complex IO in Reset (%d) %s\n",
phy->instance,
cal_read(phy->cal, CAL_CSI2_COMPLEXIO_CFG(phy->instance)), i,
(i >= 10) ? "(timeout)" : "");
/* Disable the phy */
cal_camerarx_disable(phy);
if (v4l2_subdev_call(phy->sensor, video, s_stream, 0))
phy_err(phy, "stream off failed in subdev\n");
ret = v4l2_subdev_call(phy->sensor, core, s_power, 0);
if (ret < 0 && ret != -ENOIOCTLCMD && ret != -ENODEV)
phy_err(phy, "power off failed in subdev\n");
}
/*
* Errata i913: CSI2 LDO Needs to be disabled when module is powered on
*
* Enabling CSI2 LDO shorts it to core supply. It is crucial the 2 CSI2
* LDOs on the device are disabled if CSI-2 module is powered on
* (0x4845 B304 | 0x4845 B384 [28:27] = 0x1) or in ULPS (0x4845 B304
* | 0x4845 B384 [28:27] = 0x2) mode. Common concerns include: high
* current draw on the module supply in active mode.
*
* Errata does not apply when CSI-2 module is powered off
* (0x4845 B304 | 0x4845 B384 [28:27] = 0x0).
*
* SW Workaround:
* Set the following register bits to disable the LDO,
* which is essentially CSI2 REG10 bit 6:
*
* Core 0: 0x4845 B828 = 0x0000 0040
* Core 1: 0x4845 B928 = 0x0000 0040
*/
static void cal_camerarx_i913_errata(struct cal_camerarx *phy)
{
u32 reg10 = camerarx_read(phy, CAL_CSI2_PHY_REG10);
cal_set_field(&reg10, 1, CAL_CSI2_PHY_REG10_I933_LDO_DISABLE_MASK);
phy_dbg(1, phy, "CSI2_%d_REG10 = 0x%08x\n", phy->instance, reg10);
camerarx_write(phy, CAL_CSI2_PHY_REG10, reg10);
}
/*
* Enable the expected IRQ sources
*/
void cal_camerarx_enable_irqs(struct cal_camerarx *phy)
{
u32 val;
const u32 cio_err_mask =
CAL_CSI2_COMPLEXIO_IRQ_LANE_ERRORS_MASK |
CAL_CSI2_COMPLEXIO_IRQ_FIFO_OVR_MASK |
CAL_CSI2_COMPLEXIO_IRQ_SHORT_PACKET_MASK |
CAL_CSI2_COMPLEXIO_IRQ_ECC_NO_CORRECTION_MASK;
/* Enable CIO error irqs */
cal_write(phy->cal, CAL_HL_IRQENABLE_SET(0),
CAL_HL_IRQ_CIO_MASK(phy->instance));
cal_write(phy->cal, CAL_CSI2_COMPLEXIO_IRQENABLE(phy->instance),
cio_err_mask);
/* Always enable OCPO error */
cal_write(phy->cal, CAL_HL_IRQENABLE_SET(0), CAL_HL_IRQ_OCPO_ERR_MASK);
/* Enable IRQ_WDMA_END 0/1 */
val = 0;
cal_set_field(&val, 1, CAL_HL_IRQ_MASK(phy->instance));
cal_write(phy->cal, CAL_HL_IRQENABLE_SET(1), val);
/* Enable IRQ_WDMA_START 0/1 */
val = 0;
cal_set_field(&val, 1, CAL_HL_IRQ_MASK(phy->instance));
cal_write(phy->cal, CAL_HL_IRQENABLE_SET(2), val);
/* Todo: Add VC_IRQ and CSI2_COMPLEXIO_IRQ handling */
cal_write(phy->cal, CAL_CSI2_VC_IRQENABLE(0), 0xFF000000);
}
void cal_camerarx_disable_irqs(struct cal_camerarx *phy)
{
u32 val;
/* Disable CIO error irqs */
cal_write(phy->cal, CAL_HL_IRQENABLE_CLR(0),
CAL_HL_IRQ_CIO_MASK(phy->instance));
cal_write(phy->cal, CAL_CSI2_COMPLEXIO_IRQENABLE(phy->instance),
0);
/* Disable IRQ_WDMA_END 0/1 */
val = 0;
cal_set_field(&val, 1, CAL_HL_IRQ_MASK(phy->instance));
cal_write(phy->cal, CAL_HL_IRQENABLE_CLR(1), val);
/* Disable IRQ_WDMA_START 0/1 */
val = 0;
cal_set_field(&val, 1, CAL_HL_IRQ_MASK(phy->instance));
cal_write(phy->cal, CAL_HL_IRQENABLE_CLR(2), val);
/* Todo: Add VC_IRQ and CSI2_COMPLEXIO_IRQ handling */
cal_write(phy->cal, CAL_CSI2_VC_IRQENABLE(0), 0);
}
void cal_camerarx_ppi_enable(struct cal_camerarx *phy)
{
cal_write(phy->cal, CAL_CSI2_PPI_CTRL(phy->instance), BIT(3));
cal_write_field(phy->cal, CAL_CSI2_PPI_CTRL(phy->instance),
1, CAL_CSI2_PPI_CTRL_IF_EN_MASK);
}
void cal_camerarx_ppi_disable(struct cal_camerarx *phy)
{
cal_write_field(phy->cal, CAL_CSI2_PPI_CTRL(phy->instance),
0, CAL_CSI2_PPI_CTRL_IF_EN_MASK);
}
static int cal_camerarx_regmap_init(struct cal_dev *cal,
struct cal_camerarx *phy)
{
const struct cal_camerarx_data *phy_data;
unsigned int i;
if (!cal->data)
return -EINVAL;
phy_data = &cal->data->camerarx[phy->instance];
for (i = 0; i < F_MAX_FIELDS; i++) {
struct reg_field field = {
.reg = cal->syscon_camerrx_offset,
.lsb = phy_data->fields[i].lsb,
.msb = phy_data->fields[i].msb,
};
/*
* Here we update the reg offset with the
* value found in DT
*/
phy->fields[i] = devm_regmap_field_alloc(cal->dev,
cal->syscon_camerrx,
field);
if (IS_ERR(phy->fields[i])) {
cal_err(cal, "Unable to allocate regmap fields\n");
return PTR_ERR(phy->fields[i]);
}
}
return 0;
}
static int cal_camerarx_parse_dt(struct cal_camerarx *phy)
{
struct v4l2_fwnode_endpoint *endpoint = &phy->endpoint;
struct device_node *ep_node;
char data_lanes[V4L2_FWNODE_CSI2_MAX_DATA_LANES * 2];
unsigned int i;
int ret;
/*
* Find the endpoint node for the port corresponding to the PHY
* instance, and parse its CSI-2-related properties.
*/
ep_node = of_graph_get_endpoint_by_regs(phy->cal->dev->of_node,
phy->instance, 0);
if (!ep_node) {
/*
* The endpoint is not mandatory, not all PHY instances need to
* be connected in DT.
*/
phy_dbg(3, phy, "Port has no endpoint\n");
return 0;
}
endpoint->bus_type = V4L2_MBUS_CSI2_DPHY;
ret = v4l2_fwnode_endpoint_parse(of_fwnode_handle(ep_node), endpoint);
if (ret < 0) {
phy_err(phy, "Failed to parse endpoint\n");
goto done;
}
for (i = 0; i < endpoint->bus.mipi_csi2.num_data_lanes; i++) {
unsigned int lane = endpoint->bus.mipi_csi2.data_lanes[i];
if (lane > 4) {
phy_err(phy, "Invalid position %u for data lane %u\n",
lane, i);
ret = -EINVAL;
goto done;
}
data_lanes[i*2] = '0' + lane;
data_lanes[i*2+1] = ' ';
}
data_lanes[i*2-1] = '\0';
phy_dbg(3, phy,
"CSI-2 bus: clock lane <%u>, data lanes <%s>, flags 0x%08x\n",
endpoint->bus.mipi_csi2.clock_lane, data_lanes,
endpoint->bus.mipi_csi2.flags);
/* Retrieve the connected device and store it for later use. */
phy->sensor_node = of_graph_get_remote_port_parent(ep_node);
if (!phy->sensor_node) {
phy_dbg(3, phy, "Can't get remote parent\n");
ret = -EINVAL;
goto done;
}
phy_dbg(1, phy, "Found connected device %pOFn\n", phy->sensor_node);
done:
of_node_put(ep_node);
return ret;
}
static struct cal_camerarx *cal_camerarx_create(struct cal_dev *cal,
unsigned int instance)
{
struct platform_device *pdev = to_platform_device(cal->dev);
struct cal_camerarx *phy;
int ret;
phy = kzalloc(sizeof(*phy), GFP_KERNEL);
if (!phy)
return ERR_PTR(-ENOMEM);
phy->cal = cal;
phy->instance = instance;
phy->res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
(instance == 0) ?
"cal_rx_core0" :
"cal_rx_core1");
phy->base = devm_ioremap_resource(cal->dev, phy->res);
if (IS_ERR(phy->base)) {
cal_err(cal, "failed to ioremap\n");
ret = PTR_ERR(phy->base);
goto error;
}
cal_dbg(1, cal, "ioresource %s at %pa - %pa\n",
phy->res->name, &phy->res->start, &phy->res->end);
ret = cal_camerarx_regmap_init(cal, phy);
if (ret)
goto error;
ret = cal_camerarx_parse_dt(phy);
if (ret)
goto error;
return phy;
error:
kfree(phy);
return ERR_PTR(ret);
}
static void cal_camerarx_destroy(struct cal_camerarx *phy)
{
if (!phy)
return;
of_node_put(phy->sensor_node);
kfree(phy);
}
static int cal_camerarx_init_regmap(struct cal_dev *cal)
{
struct platform_device *pdev = to_platform_device(cal->dev);
struct device_node *np = cal->dev->of_node;
struct regmap_config config = { };
struct regmap *syscon;
struct resource *res;
unsigned int offset;
void __iomem *base;
syscon = syscon_regmap_lookup_by_phandle_args(np, "ti,camerrx-control",
1, &offset);
if (!IS_ERR(syscon)) {
cal->syscon_camerrx = syscon;
cal->syscon_camerrx_offset = offset;
return 0;
}
dev_warn(cal->dev, "failed to get ti,camerrx-control: %ld\n",
PTR_ERR(syscon));
/*
* Backward DTS compatibility. If syscon entry is not present then
* check if the camerrx_control resource is present.
*/
res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
"camerrx_control");
base = devm_ioremap_resource(cal->dev, res);
if (IS_ERR(base)) {
cal_err(cal, "failed to ioremap camerrx_control\n");
return PTR_ERR(base);
}
cal_dbg(1, cal, "ioresource %s at %pa - %pa\n",
res->name, &res->start, &res->end);
config.reg_bits = 32;
config.reg_stride = 4;
config.val_bits = 32;
config.max_register = resource_size(res) - 4;
syscon = regmap_init_mmio(NULL, base, &config);
if (IS_ERR(syscon)) {
pr_err("regmap init failed\n");
return PTR_ERR(syscon);
}
/*
* In this case the base already point to the direct CM register so no
* need for an offset.
*/
cal->syscon_camerrx = syscon;
cal->syscon_camerrx_offset = 0;
return 0;
}
/* ------------------------------------------------------------------ /* ------------------------------------------------------------------
* Context Management * Context Management
* ------------------------------------------------------------------ * ------------------------------------------------------------------
...@@ -1362,6 +682,63 @@ static void cal_get_hwinfo(struct cal_dev *cal) ...@@ -1362,6 +682,63 @@ static void cal_get_hwinfo(struct cal_dev *cal)
hwinfo, CAL_HL_HWINFO_VALUE); hwinfo, CAL_HL_HWINFO_VALUE);
} }
static int cal_init_camerarx_regmap(struct cal_dev *cal)
{
struct platform_device *pdev = to_platform_device(cal->dev);
struct device_node *np = cal->dev->of_node;
struct regmap_config config = { };
struct regmap *syscon;
struct resource *res;
unsigned int offset;
void __iomem *base;
syscon = syscon_regmap_lookup_by_phandle_args(np, "ti,camerrx-control",
1, &offset);
if (!IS_ERR(syscon)) {
cal->syscon_camerrx = syscon;
cal->syscon_camerrx_offset = offset;
return 0;
}
dev_warn(cal->dev, "failed to get ti,camerrx-control: %ld\n",
PTR_ERR(syscon));
/*
* Backward DTS compatibility. If syscon entry is not present then
* check if the camerrx_control resource is present.
*/
res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
"camerrx_control");
base = devm_ioremap_resource(cal->dev, res);
if (IS_ERR(base)) {
cal_err(cal, "failed to ioremap camerrx_control\n");
return PTR_ERR(base);
}
cal_dbg(1, cal, "ioresource %s at %pa - %pa\n",
res->name, &res->start, &res->end);
config.reg_bits = 32;
config.reg_stride = 4;
config.val_bits = 32;
config.max_register = resource_size(res) - 4;
syscon = regmap_init_mmio(NULL, base, &config);
if (IS_ERR(syscon)) {
pr_err("regmap init failed\n");
return PTR_ERR(syscon);
}
/*
* In this case the base already point to the direct CM register so no
* need for an offset.
*/
cal->syscon_camerrx = syscon;
cal->syscon_camerrx_offset = 0;
return 0;
}
static int cal_probe(struct platform_device *pdev) static int cal_probe(struct platform_device *pdev)
{ {
struct cal_dev *cal; struct cal_dev *cal;
...@@ -1391,7 +768,7 @@ static int cal_probe(struct platform_device *pdev) ...@@ -1391,7 +768,7 @@ static int cal_probe(struct platform_device *pdev)
return PTR_ERR(cal->fclk); return PTR_ERR(cal->fclk);
} }
ret = cal_camerarx_init_regmap(cal); ret = cal_init_camerarx_regmap(cal);
if (ret < 0) if (ret < 0)
return ret; return ret;
......
drivers/media/platform/ti-vpe/cal.h
View file @ af30d4f3
...@@ -241,12 +241,17 @@ static inline void cal_set_field(u32 *valp, u32 field, u32 mask) ...@@ -241,12 +241,17 @@ static inline void cal_set_field(u32 *valp, u32 field, u32 mask)
void cal_quickdump_regs(struct cal_dev *cal); void cal_quickdump_regs(struct cal_dev *cal);
void cal_camerarx_disable(struct cal_camerarx *phy);
int cal_camerarx_start(struct cal_camerarx *phy, const struct cal_fmt *fmt); int cal_camerarx_start(struct cal_camerarx *phy, const struct cal_fmt *fmt);
void cal_camerarx_stop(struct cal_camerarx *phy); void cal_camerarx_stop(struct cal_camerarx *phy);
void cal_camerarx_enable_irqs(struct cal_camerarx *phy); void cal_camerarx_enable_irqs(struct cal_camerarx *phy);
void cal_camerarx_disable_irqs(struct cal_camerarx *phy); void cal_camerarx_disable_irqs(struct cal_camerarx *phy);
void cal_camerarx_ppi_enable(struct cal_camerarx *phy); void cal_camerarx_ppi_enable(struct cal_camerarx *phy);
void cal_camerarx_ppi_disable(struct cal_camerarx *phy); void cal_camerarx_ppi_disable(struct cal_camerarx *phy);
void cal_camerarx_i913_errata(struct cal_camerarx *phy);
struct cal_camerarx *cal_camerarx_create(struct cal_dev *cal,
unsigned int instance);
void cal_camerarx_destroy(struct cal_camerarx *phy);
void cal_ctx_csi2_config(struct cal_ctx *ctx); void cal_ctx_csi2_config(struct cal_ctx *ctx);
void cal_ctx_pix_proc_config(struct cal_ctx *ctx); void cal_ctx_pix_proc_config(struct cal_ctx *ctx);
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7