Skip to content

L
linux
Commit af853e63 authored by Linus Torvalds's avatar Linus Torvalds
Browse files
Options

Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm 

* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm:
  ARM: fix lh7a40x build
  ARM: fix sa1100 build
  ARM: fix clps711x, footbridge, integrator, ixp2000, ixp2300 and s3c build bug
  ARM: VFP: fix vfp thread init bug and document vfp notifier entry conditions
  ARM: pxa: fix now incorrect reference of skt->irq by using skt->socket.pci_irq
  [ARM] pxa/zeus: default configuration for Arcom Zeus SBC.
  [ARM] pxa/zeus: make Viper pcmcia support more generic to support Zeus
  [ARM] pxa/zeus: basic support for Arcom Zeus SBC
  [ARM] pxa/em-x270: fix usb hub power up/reset sequence
  PCMCIA: fix pxa2xx_lubbock modular build error
  ARM: RealView: Fix typo in the RealView/PBX Kconfig entry
  ARM: Do not allow the probing of the local timer
  ARM: Add an earlyprintk debug console
parents 3f86ce72 fc773668
Hide whitespace changes
Inline Side-by-side
Showing with 3275 additions and 132 deletions
arch/arm/Kconfig
View file @ af853e63
...@@ -603,6 +603,7 @@ config ARCH_SA1100 ...@@ -603,6 +603,7 @@ config ARCH_SA1100
select ARCH_SPARSEMEM_ENABLE select ARCH_SPARSEMEM_ENABLE
select ARCH_MTD_XIP select ARCH_MTD_XIP
select ARCH_HAS_CPUFREQ select ARCH_HAS_CPUFREQ
select CPU_FREQ
select GENERIC_GPIO select GENERIC_GPIO
select GENERIC_TIME select GENERIC_TIME
select GENERIC_CLOCKEVENTS select GENERIC_CLOCKEVENTS
...@@ -1359,13 +1360,9 @@ source "drivers/cpufreq/Kconfig" ...@@ -1359,13 +1360,9 @@ source "drivers/cpufreq/Kconfig"
config CPU_FREQ_SA1100 config CPU_FREQ_SA1100
bool bool
depends on CPU_FREQ && (SA1100_H3100 || SA1100_H3600 || SA1100_LART || SA1100_PLEB || SA1100_BADGE4 || SA1100_HACKKIT)
default y
config CPU_FREQ_SA1110 config CPU_FREQ_SA1110
bool bool
depends on CPU_FREQ && (SA1100_ASSABET || SA1100_CERF || SA1100_PT_SYSTEM3)
default y
config CPU_FREQ_INTEGRATOR config CPU_FREQ_INTEGRATOR
tristate "CPUfreq driver for ARM Integrator CPUs" tristate "CPUfreq driver for ARM Integrator CPUs"
......
arch/arm/Kconfig.debug
View file @ af853e63
...@@ -71,6 +71,14 @@ config DEBUG_LL ...@@ -71,6 +71,14 @@ config DEBUG_LL
in the kernel. This is helpful if you are debugging code that in the kernel. This is helpful if you are debugging code that
executes before the console is initialized. executes before the console is initialized.
config EARLY_PRINTK
bool "Early printk"
depends on DEBUG_LL
help
Say Y here if you want to have an early console using the
kernel low-level debugging functions. Add earlyprintk to your
kernel parameters to enable this console.
config DEBUG_ICEDCC config DEBUG_ICEDCC
bool "Kernel low-level debugging via EmbeddedICE DCC channel" bool "Kernel low-level debugging via EmbeddedICE DCC channel"
depends on DEBUG_LL depends on DEBUG_LL
......
arch/arm/configs/zeus_defconfig 0 → 100644
View file @ af853e63
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.32
# Tue Dec 8 20:27:05 2009
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_ARCH_HAS_CPUFREQ=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_MTD_XIP=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
#
# RCU Subsystem
#
# CONFIG_TREE_RCU is not set
# CONFIG_TREE_PREEMPT_RCU is not set
CONFIG_TINY_RCU=y
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=13
# CONFIG_GROUP_SCHED is not set
# CONFIG_CGROUPS is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
# CONFIG_NET_NS is not set
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
#
# Kernel Performance Events And Counters
#
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_CLK=y
#
# GCOV-based kernel profiling
#
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
# CONFIG_IOSCHED_CFQ is not set
CONFIG_DEFAULT_DEADLINE=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
# CONFIG_INLINE_SPIN_TRYLOCK is not set
# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK is not set
# CONFIG_INLINE_SPIN_LOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
CONFIG_INLINE_SPIN_UNLOCK=y
# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_READ_TRYLOCK is not set
# CONFIG_INLINE_READ_LOCK is not set
# CONFIG_INLINE_READ_LOCK_BH is not set
# CONFIG_INLINE_READ_LOCK_IRQ is not set
# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
CONFIG_INLINE_READ_UNLOCK=y
# CONFIG_INLINE_READ_UNLOCK_BH is not set
CONFIG_INLINE_READ_UNLOCK_IRQ=y
# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_WRITE_TRYLOCK is not set
# CONFIG_INLINE_WRITE_LOCK is not set
# CONFIG_INLINE_WRITE_LOCK_BH is not set
# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
CONFIG_INLINE_WRITE_UNLOCK=y
# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
# CONFIG_MUTEX_SPIN_ON_OWNER is not set
CONFIG_FREEZER=y
#
# System Type
#
CONFIG_MMU=y
# CONFIG_ARCH_AAEC2000 is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_MXC is not set
# CONFIG_ARCH_STMP3XXX is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_NOMADIK is not set
# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
# CONFIG_ARCH_IXP23XX is not set
# CONFIG_ARCH_IXP2000 is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_L7200 is not set
# CONFIG_ARCH_DOVE is not set
# CONFIG_ARCH_KIRKWOOD is not set
# CONFIG_ARCH_LOKI is not set
# CONFIG_ARCH_MV78XX0 is not set
# CONFIG_ARCH_ORION5X is not set
# CONFIG_ARCH_MMP is not set
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_NS9XXX is not set
# CONFIG_ARCH_W90X900 is not set
# CONFIG_ARCH_PNX4008 is not set
CONFIG_ARCH_PXA=y
# CONFIG_ARCH_MSM is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
# CONFIG_ARCH_S3C64XX is not set
# CONFIG_ARCH_S5PC1XX is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_U300 is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
# CONFIG_ARCH_BCMRING is not set
# CONFIG_ARCH_U8500 is not set
#
# Intel PXA2xx/PXA3xx Implementations
#
#
# Intel/Marvell Dev Platforms (sorted by hardware release time)
#
# CONFIG_ARCH_LUBBOCK is not set
# CONFIG_MACH_MAINSTONE is not set
# CONFIG_MACH_ZYLONITE300 is not set
# CONFIG_MACH_ZYLONITE320 is not set
# CONFIG_MACH_LITTLETON is not set
# CONFIG_MACH_TAVOREVB is not set
# CONFIG_MACH_SAAR is not set
#
# Third Party Dev Platforms (sorted by vendor name)
#
# CONFIG_ARCH_PXA_IDP is not set
# CONFIG_ARCH_VIPER is not set
CONFIG_MACH_ARCOM_ZEUS=y
# CONFIG_MACH_BALLOON3 is not set
# CONFIG_MACH_CSB726 is not set
# CONFIG_MACH_ARMCORE is not set
# CONFIG_MACH_EM_X270 is not set
# CONFIG_MACH_EXEDA is not set
# CONFIG_MACH_CM_X300 is not set
# CONFIG_ARCH_GUMSTIX is not set
# CONFIG_MACH_INTELMOTE2 is not set
# CONFIG_MACH_STARGATE2 is not set
# CONFIG_MACH_XCEP is not set
# CONFIG_TRIZEPS_PXA is not set
CONFIG_ARCOM_PCMCIA=y
# CONFIG_MACH_LOGICPD_PXA270 is not set
# CONFIG_MACH_PCM027 is not set
# CONFIG_MACH_COLIBRI is not set
# CONFIG_MACH_COLIBRI300 is not set
# CONFIG_MACH_COLIBRI320 is not set
#
# End-user Products (sorted by vendor name)
#
# CONFIG_MACH_H4700 is not set
# CONFIG_MACH_H5000 is not set
# CONFIG_MACH_HIMALAYA is not set
# CONFIG_MACH_MAGICIAN is not set
# CONFIG_MACH_MIOA701 is not set
# CONFIG_PXA_EZX is not set
# CONFIG_MACH_MP900C is not set
# CONFIG_ARCH_PXA_PALM is not set
# CONFIG_PXA_SHARPSL is not set
# CONFIG_ARCH_PXA_ESERIES is not set
CONFIG_PXA27x=y
CONFIG_PXA_SSP=y
CONFIG_PXA_HAVE_BOARD_IRQS=y
CONFIG_PXA_HAVE_ISA_IRQS=y
CONFIG_PLAT_PXA=y
#
# Processor Type
#
CONFIG_CPU_32=y
CONFIG_CPU_XSCALE=y
CONFIG_CPU_32v5=y
CONFIG_CPU_ABRT_EV5T=y
CONFIG_CPU_PABRT_LEGACY=y
CONFIG_CPU_CACHE_VIVT=y
CONFIG_CPU_TLB_V4WBI=y
CONFIG_CPU_CP15=y
CONFIG_CPU_CP15_MMU=y
#
# Processor Features
#
CONFIG_ARM_THUMB=y
# CONFIG_CPU_DCACHE_DISABLE is not set
CONFIG_ARM_L1_CACHE_SHIFT=5
CONFIG_IWMMXT=y
CONFIG_XSCALE_PMU=y
CONFIG_COMMON_CLKDEV=y
#
# Bus support
#
CONFIG_ISA=y
# CONFIG_PCI_SYSCALL is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_PCCARD=m
CONFIG_PCMCIA=m
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_PCMCIA_IOCTL=y
#
# PC-card bridges
#
# CONFIG_I82365 is not set
# CONFIG_TCIC is not set
CONFIG_PCMCIA_SOC_COMMON=m
CONFIG_PCMCIA_PXA2XX=m
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA_PROBE=y
#
# Kernel Features
#
CONFIG_TICK_ONESHOT=y
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_HZ=100
CONFIG_AEABI=y
CONFIG_OABI_COMPAT=y
# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
# CONFIG_HIGHMEM is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4096
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ALIGNMENT_TRAP=y
# CONFIG_UACCESS_WITH_MEMCPY is not set
#
# Boot options
#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="root=31:02 rootfstype=jffs2 ro console=ttyS0,115200"
# CONFIG_XIP_KERNEL is not set
# CONFIG_KEXEC is not set
#
# CPU Power Management
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=m
CONFIG_CPU_FREQ_GOV_ONDEMAND=m
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
# CONFIG_CPU_IDLE is not set
#
# Floating point emulation
#
#
# At least one emulation must be selected
#
CONFIG_FPE_NWFPE=y
# CONFIG_FPE_NWFPE_XP is not set
# CONFIG_FPE_FASTFPE is not set
#
# Userspace binary formats
#
CONFIG_BINFMT_ELF=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_HAVE_AOUT=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set
#
# Power management options
#
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_APM_EMULATION=y
# CONFIG_PM_RUNTIME is not set
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
# CONFIG_IP_PNP_BOOTP is not set
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
CONFIG_BT=m
CONFIG_BT_L2CAP=m
# CONFIG_BT_SCO is not set
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
# CONFIG_BT_BNEP_MC_FILTER is not set
# CONFIG_BT_BNEP_PROTO_FILTER is not set
# CONFIG_BT_HIDP is not set
#
# Bluetooth device drivers
#
# CONFIG_BT_HCIBTUSB is not set
# CONFIG_BT_HCIBTSDIO is not set
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
# CONFIG_BT_HCIUART_LL is not set
# CONFIG_BT_HCIBCM203X is not set
# CONFIG_BT_HCIBPA10X is not set
# CONFIG_BT_HCIBFUSB is not set
# CONFIG_BT_HCIDTL1 is not set
# CONFIG_BT_HCIBT3C is not set
# CONFIG_BT_HCIBLUECARD is not set
# CONFIG_BT_HCIBTUART is not set
# CONFIG_BT_HCIVHCI is not set
# CONFIG_BT_MRVL is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
CONFIG_WIRELESS_EXT=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_WEXT_SPY=y
CONFIG_WEXT_PRIV=y
CONFIG_CFG80211=m
# CONFIG_NL80211_TESTMODE is not set
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
# CONFIG_CFG80211_REG_DEBUG is not set
CONFIG_CFG80211_DEFAULT_PS=y
# CONFIG_WIRELESS_OLD_REGULATORY is not set
CONFIG_CFG80211_WEXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
CONFIG_LIB80211=m
# CONFIG_LIB80211_DEBUG is not set
CONFIG_MAC80211=m
CONFIG_MAC80211_RC_MINSTREL=y
# CONFIG_MAC80211_RC_DEFAULT_PID is not set
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel"
# CONFIG_MAC80211_MESH is not set
# CONFIG_MAC80211_LEDS is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_REDBOOT_PARTS=y
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
CONFIG_MTD_REDBOOT_PARTS_READONLY=y
# CONFIG_MTD_CMDLINE_PARTS is not set
# CONFIG_MTD_AFS_PARTS is not set
# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=m
CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
# CONFIG_MTD_OOPS is not set
#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=y
CONFIG_MTD_JEDECPROBE=y
CONFIG_MTD_GEN_PROBE=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
CONFIG_MTD_CFI_NOSWAP=y
# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
CONFIG_MTD_CFI_GEOMETRY=y
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
# CONFIG_MTD_CFI_I2 is not set
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
# CONFIG_MTD_OTP is not set
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y
# CONFIG_MTD_CFI_STAA is not set
CONFIG_MTD_CFI_UTIL=y
CONFIG_MTD_RAM=y
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
# CONFIG_MTD_XIP is not set
#
# Mapping drivers for chip access
#
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=y
# CONFIG_MTD_PHYSMAP_COMPAT is not set
CONFIG_MTD_PXA2XX=y
# CONFIG_MTD_ARM_INTEGRATOR is not set
# CONFIG_MTD_IMPA7 is not set
# CONFIG_MTD_GPIO_ADDR is not set
# CONFIG_MTD_PLATRAM is not set
#
# Self-contained MTD device drivers
#
# CONFIG_MTD_DATAFLASH is not set
# CONFIG_MTD_M25P80 is not set
# CONFIG_MTD_SST25L is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_BLOCK2MTD is not set
#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
# CONFIG_MTD_NAND is not set
# CONFIG_MTD_ONENAND is not set
#
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
#
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
# CONFIG_PARPORT is not set
# CONFIG_PNP is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
#
# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_MG_DISK is not set
CONFIG_MISC_DEVICES=y
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_ISL29003 is not set
# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
# EEPROM support
#
CONFIG_EEPROM_AT24=m
# CONFIG_EEPROM_AT25 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_IWMC3200TOP is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=m
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
# CONFIG_SCSI_PROC_FS is not set
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_LIBFC is not set
# CONFIG_LIBFCOE is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=m
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_VERBOSE_ERROR=y
# CONFIG_SATA_PMP is not set
CONFIG_ATA_SFF=y
# CONFIG_SATA_MV is not set
# CONFIG_PATA_LEGACY is not set
CONFIG_PATA_PCMCIA=m
# CONFIG_PATA_QDI is not set
# CONFIG_PATA_WINBOND_VLB is not set
# CONFIG_MD is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
# CONFIG_ARCNET is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_AX88796 is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_SMC91X is not set
CONFIG_DM9000=y
CONFIG_DM9000_DEBUGLEVEL=4
# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set
# CONFIG_ENC28J60 is not set
# CONFIG_ETHOC is not set
# CONFIG_SMC911X is not set
# CONFIG_SMSC911X is not set
# CONFIG_NET_VENDOR_RACAL is not set
# CONFIG_DNET is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
# CONFIG_CS89x0 is not set
# CONFIG_KS8842 is not set
# CONFIG_KS8851 is not set
# CONFIG_KS8851_MLL is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
# CONFIG_PCMCIA_RAYCS is not set
# CONFIG_LIBERTAS_THINFIRM is not set
# CONFIG_ATMEL is not set
# CONFIG_AT76C50X_USB is not set
# CONFIG_AIRO_CS is not set
# CONFIG_PCMCIA_WL3501 is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_USB_NET_RNDIS_WLAN is not set
# CONFIG_RTL8187 is not set
# CONFIG_MAC80211_HWSIM is not set
# CONFIG_ATH_COMMON is not set
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not set
# CONFIG_HOSTAP is not set
# CONFIG_IWM is not set
# CONFIG_LIBERTAS is not set
CONFIG_HERMES=m
CONFIG_HERMES_CACHE_FW_ON_INIT=y
CONFIG_PCMCIA_HERMES=m
# CONFIG_PCMCIA_SPECTRUM is not set
# CONFIG_P54_COMMON is not set
CONFIG_RT2X00=m
# CONFIG_RT2500USB is not set
CONFIG_RT73USB=m
# CONFIG_RT2800USB is not set
CONFIG_RT2X00_LIB_USB=m
CONFIG_RT2X00_LIB=m
CONFIG_RT2X00_LIB_FIRMWARE=y
CONFIG_RT2X00_LIB_CRYPTO=y
CONFIG_RT2X00_LIB_LEDS=y
# CONFIG_RT2X00_DEBUG is not set
# CONFIG_WL12XX is not set
# CONFIG_ZD1211RW is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
CONFIG_NET_PCMCIA=y
# CONFIG_PCMCIA_3C589 is not set
# CONFIG_PCMCIA_3C574 is not set
# CONFIG_PCMCIA_FMVJ18X is not set
# CONFIG_PCMCIA_PCNET is not set
# CONFIG_PCMCIA_NMCLAN is not set
# CONFIG_PCMCIA_SMC91C92 is not set
# CONFIG_PCMCIA_XIRC2PS is not set
# CONFIG_PCMCIA_AXNET is not set
# CONFIG_WAN is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
# CONFIG_PPP_FILTER is not set
CONFIG_PPP_ASYNC=m
# CONFIG_PPP_SYNC_TTY is not set
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
# CONFIG_PPP_MPPE is not set
# CONFIG_PPPOE is not set
# CONFIG_PPPOL2TP is not set
# CONFIG_SLIP is not set
CONFIG_SLHC=m
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_ADS7846 is not set
# CONFIG_TOUCHSCREEN_AD7877 is not set
# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_EETI is not set
CONFIG_TOUCHSCREEN_FUJITSU=m
# CONFIG_TOUCHSCREEN_GUNZE is not set
CONFIG_TOUCHSCREEN_ELO=m
# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
# CONFIG_TOUCHSCREEN_MCS5000 is not set
CONFIG_TOUCHSCREEN_MTOUCH=m
CONFIG_TOUCHSCREEN_INEXIO=m
# CONFIG_TOUCHSCREEN_MK712 is not set
CONFIG_TOUCHSCREEN_HTCPEN=m
CONFIG_TOUCHSCREEN_PENMOUNT=m
CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
CONFIG_TOUCHSCREEN_TOUCHWIN=m
# CONFIG_TOUCHSCREEN_WM97XX is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
CONFIG_TOUCHSCREEN_TOUCHIT213=m
# CONFIG_TOUCHSCREEN_TSC2007 is not set
# CONFIG_TOUCHSCREEN_W90X900 is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_ATI_REMOTE is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
CONFIG_INPUT_UINPUT=m
# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
# CONFIG_SERIAL_8250_CS is not set
CONFIG_SERIAL_8250_NR_UARTS=7
CONFIG_SERIAL_8250_RUNTIME_UARTS=7
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MAX3100 is not set
# CONFIG_SERIAL_PXA is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=m
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_CARDMAN_4000 is not set
# CONFIG_CARDMAN_4040 is not set
# CONFIG_IPWIRELESS is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
# CONFIG_I2C_HELPER_AUTO is not set
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
# CONFIG_I2C_ALGOPCF is not set
# CONFIG_I2C_ALGOPCA is not set
#
# I2C Hardware Bus support
#
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_DESIGNWARE is not set
CONFIG_I2C_GPIO=y
# CONFIG_I2C_OCORES is not set
CONFIG_I2C_PXA=y
# CONFIG_I2C_PXA_SLAVE is not set
# CONFIG_I2C_SIMTEC is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_ELEKTOR is not set
# CONFIG_I2C_PCA_ISA is not set
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
#
# SPI Master Controller Drivers
#
# CONFIG_SPI_BITBANG is not set
# CONFIG_SPI_GPIO is not set
CONFIG_SPI_PXA2XX=y
#
# SPI Protocol Masters
#
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
#
# PPS support
#
# CONFIG_PPS is not set
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y
#
# Memory mapped GPIO expanders:
#
#
# I2C GPIO expanders:
#
# CONFIG_GPIO_MAX732X is not set
CONFIG_GPIO_PCA953X=y
# CONFIG_GPIO_PCF857X is not set
#
# PCI GPIO expanders:
#
#
# SPI GPIO expanders:
#
# CONFIG_GPIO_MAX7301 is not set
# CONFIG_GPIO_MCP23S08 is not set
# CONFIG_GPIO_MC33880 is not set
#
# AC97 GPIO expanders:
#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Native drivers
#
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADCXX is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM70 is not set
CONFIG_SENSORS_LM75=m
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1111 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_SHT15 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_LIS3_SPI is not set
# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
# CONFIG_SA1100_WATCHDOG is not set
#
# ISA-based Watchdog Cards
#
# CONFIG_PCWATCHDOG is not set
# CONFIG_MIXCOMWD is not set
# CONFIG_WDT is not set
#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_ASIC3 is not set
# CONFIG_HTC_EGPIO is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_UCB1400_CORE is not set
# CONFIG_TPS65010 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_T7L66XB is not set
# CONFIG_MFD_TC6387XB is not set
# CONFIG_MFD_TC6393XB is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_MC13783 is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_EZX_PCAP is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=m
CONFIG_FB_CFB_COPYAREA=m
CONFIG_FB_CFB_IMAGEBLIT=m
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
#
# Frame buffer hardware drivers
#
# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_PXA=m
# CONFIG_FB_PXA_OVERLAY is not set
# CONFIG_FB_PXA_SMARTPANEL is not set
CONFIG_FB_PXA_PARAMETERS=y
# CONFIG_FB_MBX is not set
# CONFIG_FB_W100 is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=m
# CONFIG_LCD_LMS283GF05 is not set
# CONFIG_LCD_LTV350QV is not set
# CONFIG_LCD_ILI9320 is not set
# CONFIG_LCD_TDO24M is not set
# CONFIG_LCD_VGG2432A4 is not set
# CONFIG_LCD_PLATFORM is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=m
CONFIG_BACKLIGHT_GENERIC=m
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
#
# CONFIG_VGA_CONSOLE is not set
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=m
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=m
CONFIG_SOUND_OSS_CORE=y
CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_JACK=y
# CONFIG_SND_SEQUENCER is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
# CONFIG_SND_DYNAMIC_MINORS is not set
# CONFIG_SND_SUPPORT_OLD_API is not set
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
# CONFIG_SND_RAWMIDI_SEQ is not set
# CONFIG_SND_OPL3_LIB_SEQ is not set
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
# CONFIG_SND_EMU10K1_SEQ is not set
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_DRIVERS=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
# CONFIG_SND_AC97_POWER_SAVE is not set
CONFIG_SND_ARM=y
CONFIG_SND_PXA2XX_PCM=m
CONFIG_SND_PXA2XX_LIB=m
CONFIG_SND_PXA2XX_LIB_AC97=y
CONFIG_SND_PXA2XX_AC97=m
# CONFIG_SND_SPI is not set
CONFIG_SND_USB=y
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_CAIAQ is not set
# CONFIG_SND_PCMCIA is not set
CONFIG_SND_SOC=m
CONFIG_SND_PXA2XX_SOC=m
CONFIG_SND_SOC_I2C_AND_SPI=m
# CONFIG_SND_SOC_ALL_CODECS is not set
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=m
# CONFIG_HID_SUPPORT is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
# CONFIG_USB_ARCH_HAS_EHCI is not set
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set
# CONFIG_USB_MON is not set
# CONFIG_USB_WUSB is not set
# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_HWA_HCD is not set
# CONFIG_USB_MUSB_HDRC is not set
# CONFIG_USB_GADGET_MUSB_HDRC is not set
#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
#
# USB port drivers
#
CONFIG_USB_SERIAL=m
# CONFIG_USB_EZUSB is not set
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_AIRCABLE is not set
# CONFIG_USB_SERIAL_ARK3116 is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_CH341 is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_CP210X is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
# CONFIG_USB_SERIAL_EMPEG is not set
# CONFIG_USB_SERIAL_FTDI_SIO is not set
# CONFIG_USB_SERIAL_FUNSOFT is not set
# CONFIG_USB_SERIAL_VISOR is not set
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_GARMIN is not set
# CONFIG_USB_SERIAL_IPW is not set
# CONFIG_USB_SERIAL_IUU is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
CONFIG_USB_SERIAL_MCT_U232=m
# CONFIG_USB_SERIAL_MOS7720 is not set
# CONFIG_USB_SERIAL_MOS7840 is not set
# CONFIG_USB_SERIAL_MOTOROLA is not set
# CONFIG_USB_SERIAL_NAVMAN is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_OTI6858 is not set
# CONFIG_USB_SERIAL_QUALCOMM is not set
# CONFIG_USB_SERIAL_SPCP8X5 is not set
# CONFIG_USB_SERIAL_HP4X is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
# CONFIG_USB_SERIAL_SYMBOL is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OPTION is not set
# CONFIG_USB_SERIAL_OMNINET is not set
# CONFIG_USB_SERIAL_OPTICON is not set
# CONFIG_USB_SERIAL_DEBUG is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
CONFIG_USB_GADGET=m
# CONFIG_USB_GADGET_DEBUG is not set
# CONFIG_USB_GADGET_DEBUG_FILES is not set
CONFIG_USB_GADGET_VBUS_DRAW=2
CONFIG_USB_GADGET_SELECTED=y
# CONFIG_USB_GADGET_AT91 is not set
# CONFIG_USB_GADGET_ATMEL_USBA is not set
# CONFIG_USB_GADGET_FSL_USB2 is not set
# CONFIG_USB_GADGET_LH7A40X is not set
# CONFIG_USB_GADGET_OMAP is not set
# CONFIG_USB_GADGET_PXA25X is not set
# CONFIG_USB_GADGET_R8A66597 is not set
CONFIG_USB_GADGET_PXA27X=y
CONFIG_USB_PXA27X=m
# CONFIG_USB_GADGET_S3C_HSOTG is not set
# CONFIG_USB_GADGET_IMX is not set
# CONFIG_USB_GADGET_S3C2410 is not set
# CONFIG_USB_GADGET_M66592 is not set
# CONFIG_USB_GADGET_AMD5536UDC is not set
# CONFIG_USB_GADGET_FSL_QE is not set
# CONFIG_USB_GADGET_CI13XXX is not set
# CONFIG_USB_GADGET_NET2280 is not set
# CONFIG_USB_GADGET_GOKU is not set
# CONFIG_USB_GADGET_LANGWELL is not set
# CONFIG_USB_GADGET_DUMMY_HCD is not set
# CONFIG_USB_GADGET_DUALSPEED is not set
# CONFIG_USB_ZERO is not set
# CONFIG_USB_AUDIO is not set
CONFIG_USB_ETH=m
CONFIG_USB_ETH_RNDIS=y
# CONFIG_USB_ETH_EEM is not set
CONFIG_USB_GADGETFS=m
CONFIG_USB_FILE_STORAGE=m
# CONFIG_USB_FILE_STORAGE_TEST is not set
CONFIG_USB_G_SERIAL=m
# CONFIG_USB_MIDI_GADGET is not set
CONFIG_USB_G_PRINTER=m
# CONFIG_USB_CDC_COMPOSITE is not set
#
# OTG and related infrastructure
#
CONFIG_USB_OTG_UTILS=y
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_NOP_USB_XCEIV is not set
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
#
# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=y
# CONFIG_MMC_BLOCK_BOUNCE is not set
# CONFIG_SDIO_UART is not set
# CONFIG_MMC_TEST is not set
#
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_PXA=y
# CONFIG_MMC_SDHCI is not set
# CONFIG_MMC_AT91 is not set
# CONFIG_MMC_ATMELMCI is not set
# CONFIG_MMC_SPI is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=m
#
# LED drivers
#
# CONFIG_LEDS_PCA9532 is not set
CONFIG_LEDS_GPIO=m
CONFIG_LEDS_GPIO_PLATFORM=y
# CONFIG_LEDS_LP3944 is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_DAC124S085 is not set
# CONFIG_LEDS_BD2802 is not set
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
CONFIG_LEDS_TRIGGER_BACKLIGHT=m
CONFIG_LEDS_TRIGGER_GPIO=m
CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
#
# iptables trigger is under Netfilter config (LED target)
#
# CONFIG_ACCESSIBILITY is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=m
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
CONFIG_RTC_DRV_ISL1208=m
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_M41T94 is not set
# CONFIG_RTC_DRV_DS1305 is not set
# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_DS3234 is not set
# CONFIG_RTC_DRV_PCF2123 is not set
#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
# CONFIG_RTC_DRV_SA1100 is not set
CONFIG_RTC_DRV_PXA=m
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
#
# TI VLYNQ
#
# CONFIG_STAGING is not set
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
#
# Caches
#
# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
# CONFIG_JFFS2_SUMMARY is not set
# CONFIG_JFFS2_FS_XATTR is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
CONFIG_ROOT_NFS=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=m
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=m
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_PAGE_POISONING is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_ARM_UNWIND=y
# CONFIG_DEBUG_USER is not set
CONFIG_DEBUG_ERRORS=y
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_LL is not set
# CONFIG_OC_ETM is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
# CONFIG_DEFAULT_SECURITY_SELINUX is not set
# CONFIG_DEFAULT_SECURITY_SMACK is not set
# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=m
CONFIG_CRYPTO_ALGAPI2=m
CONFIG_CRYPTO_AEAD2=m
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_BLKCIPHER2=m
CONFIG_CRYPTO_HASH=m
CONFIG_CRYPTO_HASH2=m
CONFIG_CRYPTO_RNG2=m
CONFIG_CRYPTO_PCOMP=m
CONFIG_CRYPTO_MANAGER=m
CONFIG_CRYPTO_MANAGER2=m
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
CONFIG_CRYPTO_WORKQUEUE=m
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_SEQIV is not set
#
# Block modes
#
# CONFIG_CRYPTO_CBC is not set
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=m
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set
#
# Hash modes
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
CONFIG_CRYPTO_MICHAEL_MIC=m
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set
#
# Ciphers
#
CONFIG_CRYPTO_AES=m
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_ARC4=m
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_DES is not set
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set
#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC_T10DIF=m
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_NLATTR=y
arch/arm/kernel/Makefile
View file @ af853e63
...@@ -54,5 +54,6 @@ endif ...@@ -54,5 +54,6 @@ endif
head-y := head$(MMUEXT).o head-y := head$(MMUEXT).o
obj-$(CONFIG_DEBUG_LL) += debug.o obj-$(CONFIG_DEBUG_LL) += debug.o
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
extra-y := $(head-y) init_task.o vmlinux.lds extra-y := $(head-y) init_task.o vmlinux.lds
arch/arm/kernel/early_printk.c 0 → 100644
View file @ af853e63
/*
* linux/arch/arm/kernel/early_printk.c
*
* Copyright (C) 2009 Sascha Hauer <s.hauer@pengutronix.de>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/console.h>
#include <linux/init.h>
extern void printch(int);
static void early_write(const char *s, unsigned n)
{
while (n-- > 0) {
if (*s == '\n')
printch('\r');
printch(*s);
s++;
}
}
static void early_console_write(struct console *con, const char *s, unsigned n)
{
early_write(s, n);
}
static struct console early_console = {
.name = "earlycon",
.write = early_console_write,
.flags = CON_PRINTBUFFER | CON_BOOT,
.index = -1,
};
asmlinkage void early_printk(const char *fmt, ...)
{
char buf[512];
int n;
va_list ap;
va_start(ap, fmt);
n = vscnprintf(buf, sizeof(buf), fmt, ap);
early_write(buf, n);
va_end(ap);
}
static int __init setup_early_printk(char *buf)
{
register_console(&early_console);
return 0;
}
early_param("earlyprintk", setup_early_printk);
arch/arm/kernel/smp_twd.c
View file @ af853e63
...@@ -160,6 +160,7 @@ void __cpuinit twd_timer_setup(struct clock_event_device *clk) ...@@ -160,6 +160,7 @@ void __cpuinit twd_timer_setup(struct clock_event_device *clk)
/* Make sure our local interrupt controller has this enabled */ /* Make sure our local interrupt controller has this enabled */
local_irq_save(flags); local_irq_save(flags);
irq_to_desc(clk->irq)->status |= IRQ_NOPROBE;
get_irq_chip(clk->irq)->unmask(clk->irq); get_irq_chip(clk->irq)->unmask(clk->irq);
local_irq_restore(flags); local_irq_restore(flags);
......
arch/arm/mach-clps711x/include/mach/memory.h
View file @ af853e63
...@@ -30,6 +30,8 @@ ...@@ -30,6 +30,8 @@
#define __virt_to_bus(x) ((x) - PAGE_OFFSET) #define __virt_to_bus(x) ((x) - PAGE_OFFSET)
#define __bus_to_virt(x) ((x) + PAGE_OFFSET) #define __bus_to_virt(x) ((x) + PAGE_OFFSET)
#define __pfn_to_bus(x) (__pfn_to_phys(x) - PHYS_OFFSET)
#define __bus_to_pfn(x) __phys_to_pfn((x) + PHYS_OFFSET)
#endif #endif
......
arch/arm/mach-footbridge/common.c
View file @ af853e63
...@@ -201,6 +201,11 @@ void __init footbridge_map_io(void) ...@@ -201,6 +201,11 @@ void __init footbridge_map_io(void)
#ifdef CONFIG_FOOTBRIDGE_ADDIN #ifdef CONFIG_FOOTBRIDGE_ADDIN
static inline unsigned long fb_bus_sdram_offset(void)
{
return *CSR_PCISDRAMBASE & 0xfffffff0;
}
/* /*
* These two functions convert virtual addresses to PCI addresses and PCI * These two functions convert virtual addresses to PCI addresses and PCI
* addresses to virtual addresses. Note that it is only legal to use these * addresses to virtual addresses. Note that it is only legal to use these
...@@ -210,14 +215,13 @@ unsigned long __virt_to_bus(unsigned long res) ...@@ -210,14 +215,13 @@ unsigned long __virt_to_bus(unsigned long res)
{ {
WARN_ON(res < PAGE_OFFSET || res >= (unsigned long)high_memory); WARN_ON(res < PAGE_OFFSET || res >= (unsigned long)high_memory);
return (res - PAGE_OFFSET) + (*CSR_PCISDRAMBASE & 0xfffffff0); return res + (fb_bus_sdram_offset() - PAGE_OFFSET);
} }
EXPORT_SYMBOL(__virt_to_bus); EXPORT_SYMBOL(__virt_to_bus);
unsigned long __bus_to_virt(unsigned long res) unsigned long __bus_to_virt(unsigned long res)
{ {
res -= (*CSR_PCISDRAMBASE & 0xfffffff0); res = res - (fb_bus_sdram_offset() - PAGE_OFFSET);
res += PAGE_OFFSET;
WARN_ON(res < PAGE_OFFSET || res >= (unsigned long)high_memory); WARN_ON(res < PAGE_OFFSET || res >= (unsigned long)high_memory);
...@@ -225,4 +229,16 @@ unsigned long __bus_to_virt(unsigned long res) ...@@ -225,4 +229,16 @@ unsigned long __bus_to_virt(unsigned long res)
} }
EXPORT_SYMBOL(__bus_to_virt); EXPORT_SYMBOL(__bus_to_virt);
unsigned long __pfn_to_bus(unsigned long pfn)
{
return __pfn_to_phys(pfn) + (fb_bus_sdram_offset() - PHYS_OFFSET));
}
EXPORT_SYMBOL(__pfn_to_bus);
unsigned long __bus_to_pfn(unsigned long bus)
{
return __phys_to_pfn(bus - (fb_bus_sdram_offset() - PHYS_OFFSET));
}
EXPORT_SYMBOL(__bus_to_pfn);
#endif #endif
arch/arm/mach-footbridge/include/mach/memory.h
View file @ af853e63
...@@ -29,6 +29,8 @@ ...@@ -29,6 +29,8 @@
#ifndef __ASSEMBLY__ #ifndef __ASSEMBLY__
extern unsigned long __virt_to_bus(unsigned long); extern unsigned long __virt_to_bus(unsigned long);
extern unsigned long __bus_to_virt(unsigned long); extern unsigned long __bus_to_virt(unsigned long);
extern unsigned long __pfn_to_bus(unsigned long);
extern unsigned long __bus_to_pfn(unsigned long);
#endif #endif
#define __virt_to_bus __virt_to_bus #define __virt_to_bus __virt_to_bus
#define __bus_to_virt __bus_to_virt #define __bus_to_virt __bus_to_virt
...@@ -36,14 +38,15 @@ extern unsigned long __bus_to_virt(unsigned long); ...@@ -36,14 +38,15 @@ extern unsigned long __bus_to_virt(unsigned long);
#elif defined(CONFIG_FOOTBRIDGE_HOST) #elif defined(CONFIG_FOOTBRIDGE_HOST)
/* /*
* The footbridge is programmed to expose the system RAM at the corresponding * The footbridge is programmed to expose the system RAM at 0xe0000000.
* address. So, if PAGE_OFFSET is 0xc0000000, RAM appears at 0xe0000000. * The requirement is that the RAM isn't placed at bus address 0, which
* If 0x80000000, then its exposed at 0xa0000000 on the bus. etc.
* The only requirement is that the RAM isn't placed at bus address 0 which
* would clash with VGA cards. * would clash with VGA cards.
*/ */
#define __virt_to_bus(x) ((x) - 0xe0000000) #define BUS_OFFSET 0xe0000000
#define __bus_to_virt(x) ((x) + 0xe0000000) #define __virt_to_bus(x) ((x) + (BUS_OFFSET - PAGE_OFFSET))
#define __bus_to_virt(x) ((x) - (BUS_OFFSET - PAGE_OFFSET))
#define __pfn_to_bus(x) (__pfn_to_phys(x) + (BUS_OFFSET - PHYS_OFFSET))
#define __bus_to_pfn(x) __phys_to_pfn((x) - (BUS_OFFSET - PHYS_OFFSET))
#else #else
......
arch/arm/mach-integrator/include/mach/memory.h
View file @ af853e63
...@@ -28,6 +28,7 @@ ...@@ -28,6 +28,7 @@
#define BUS_OFFSET UL(0x80000000) #define BUS_OFFSET UL(0x80000000)
#define __virt_to_bus(x) ((x) - PAGE_OFFSET + BUS_OFFSET) #define __virt_to_bus(x) ((x) - PAGE_OFFSET + BUS_OFFSET)
#define __bus_to_virt(x) ((x) - BUS_OFFSET + PAGE_OFFSET) #define __bus_to_virt(x) ((x) - BUS_OFFSET + PAGE_OFFSET)
#define __pfn_to_bus(x) (((x) << PAGE_SHIFT) + BUS_OFFSET) #define __pfn_to_bus(x) (__pfn_to_phys(x) + (BUS_OFFSET - PHYS_OFFSET))
#define __bus_to_pfn(x) __phys_to_pfn((x) - (BUS_OFFSET - PHYS_OFFSET))
#endif #endif
arch/arm/mach-ixp2000/include/mach/memory.h
View file @ af853e63
...@@ -17,11 +17,15 @@ ...@@ -17,11 +17,15 @@
#include <mach/ixp2000-regs.h> #include <mach/ixp2000-regs.h>
#define __virt_to_bus(v) \ #define IXP2000_PCI_SDRAM_OFFSET (*IXP2000_PCI_SDRAM_BAR & 0xfffffff0)
(((__virt_to_phys(v) - 0x0) + (*IXP2000_PCI_SDRAM_BAR & 0xfffffff0)))
#define __bus_to_virt(b) \ #define __phys_to_bus(x) ((x) + (IXP2000_PCI_SDRAM_OFFSET - PHYS_OFFSET))
__phys_to_virt((((b - (*IXP2000_PCI_SDRAM_BAR & 0xfffffff0)) + 0x0))) #define __bus_to_phys(x) ((x) - (IXP2000_PCI_SDRAM_OFFSET - PHYS_OFFSET))
#define __virt_to_bus(v) __phys_to_bus(__virt_to_phys(v))
#define __bus_to_virt(b) __phys_to_virt(__bus_to_phys(b))
#define __pfn_to_bus(p) __phys_to_bus(__pfn_to_phys(p))
#define __bus_to_pfn(b) __phys_to_pfn(__bus_to_phys(b))
#endif #endif
arch/arm/mach-ixp23xx/include/mach/memory.h
View file @ af853e63
...@@ -19,16 +19,15 @@ ...@@ -19,16 +19,15 @@
*/ */
#define PHYS_OFFSET (0x00000000) #define PHYS_OFFSET (0x00000000)
#define __virt_to_bus(v) \ #define IXP23XX_PCI_SDRAM_OFFSET (*((volatile int *)IXP23XX_PCI_SDRAM_BAR) & 0xfffffff0))
({ unsigned int ret; \
ret = ((__virt_to_phys(v) - 0x00000000) + \ #define __phys_to_bus(x) ((x) + (IXP23XX_PCI_SDRAM_OFFSET - PHYS_OFFSET))
(*((volatile int *)IXP23XX_PCI_SDRAM_BAR) & 0xfffffff0)); \ #define __bus_to_phys(x) ((x) - (IXP23XX_PCI_SDRAM_OFFSET - PHYS_OFFSET))
ret; })
#define __virt_to_bus(v) __phys_to_bus(__virt_to_phys(v))
#define __bus_to_virt(b) \ #define __bus_to_virt(b) __phys_to_virt(__bus_to_phys(b))
({ unsigned int data; \ #define __pfn_to_bus(p) __phys_to_bus(__pfn_to_phys(p))
data = *((volatile int *)IXP23XX_PCI_SDRAM_BAR); \ #define __bus_to_pfn(b) __phys_to_pfn(__bus_to_phys(b))
__phys_to_virt((((b - (data & 0xfffffff0)) + 0x00000000))); })
#define arch_is_coherent() 1 #define arch_is_coherent() 1
......
arch/arm/mach-lh7a40x/clocks.c
View file @ af853e63
...@@ -7,8 +7,6 @@ ...@@ -7,8 +7,6 @@
* version 2 as published by the Free Software Foundation. * version 2 as published by the Free Software Foundation.
* *
*/ */
#include <linux/cpufreq.h>
#include <mach/hardware.h> #include <mach/hardware.h>
#include <mach/clocks.h> #include <mach/clocks.h>
#include <linux/err.h> #include <linux/err.h>
...@@ -31,12 +29,6 @@ struct clk { ...@@ -31,12 +29,6 @@ struct clk {
#define HCLKDIV(c) (((c) >> 0) & 0x02) #define HCLKDIV(c) (((c) >> 0) & 0x02)
#define PCLKDIV(c) (((c) >> 16) & 0x03) #define PCLKDIV(c) (((c) >> 16) & 0x03)
unsigned int cpufreq_get (unsigned int cpu) /* in kHz */
{
return fclkfreq_get ()/1000;
}
EXPORT_SYMBOL(cpufreq_get);
unsigned int fclkfreq_get (void) unsigned int fclkfreq_get (void)
{ {
unsigned int clkset = CSC_CLKSET; unsigned int clkset = CSC_CLKSET;
......
arch/arm/mach-pxa/Kconfig
View file @ af853e63
...@@ -63,6 +63,15 @@ config ARCH_VIPER ...@@ -63,6 +63,15 @@ config ARCH_VIPER
select HAVE_PWM select HAVE_PWM
select PXA_HAVE_BOARD_IRQS select PXA_HAVE_BOARD_IRQS
select PXA_HAVE_ISA_IRQS select PXA_HAVE_ISA_IRQS
select ARCOM_PCMCIA
config MACH_ARCOM_ZEUS
bool "Arcom/Eurotech ZEUS SBC"
select PXA27x
select ISA
select PXA_HAVE_BOARD_IRQS
select PXA_HAVE_ISA_IRQS
select ARCOM_PCMCIA
config MACH_BALLOON3 config MACH_BALLOON3
bool "Balloon 3 board" bool "Balloon 3 board"
...@@ -179,6 +188,11 @@ config MACH_TRIZEPS_ANY ...@@ -179,6 +188,11 @@ config MACH_TRIZEPS_ANY
endchoice endchoice
config ARCOM_PCMCIA
bool
help
Generic option for Arcom Viper/Zeus PCMCIA
config TRIZEPS_PCMCIA config TRIZEPS_PCMCIA
bool bool
help help
......
arch/arm/mach-pxa/Makefile
View file @ af853e63
...@@ -38,6 +38,7 @@ obj-$(CONFIG_MACH_SAAR) += saar.o ...@@ -38,6 +38,7 @@ obj-$(CONFIG_MACH_SAAR) += saar.o
# 3rd Party Dev Platforms # 3rd Party Dev Platforms
obj-$(CONFIG_ARCH_PXA_IDP) += idp.o obj-$(CONFIG_ARCH_PXA_IDP) += idp.o
obj-$(CONFIG_ARCH_VIPER) += viper.o obj-$(CONFIG_ARCH_VIPER) += viper.o
obj-$(CONFIG_MACH_ARCOM_ZEUS) += zeus.o
obj-$(CONFIG_MACH_BALLOON3) += balloon3.o obj-$(CONFIG_MACH_BALLOON3) += balloon3.o
obj-$(CONFIG_MACH_CSB726) += csb726.o obj-$(CONFIG_MACH_CSB726) += csb726.o
obj-$(CONFIG_CSB726_CSB701) += csb701.o obj-$(CONFIG_CSB726_CSB701) += csb701.o
......
arch/arm/mach-pxa/em-x270.c
View file @ af853e63
...@@ -497,16 +497,15 @@ static int em_x270_usb_hub_init(void) ...@@ -497,16 +497,15 @@ static int em_x270_usb_hub_init(void)
goto err_free_vbus_gpio; goto err_free_vbus_gpio;
/* USB Hub power-on and reset */ /* USB Hub power-on and reset */
gpio_direction_output(usb_hub_reset, 0); gpio_direction_output(usb_hub_reset, 1);
gpio_direction_output(GPIO9_USB_VBUS_EN, 0);
regulator_enable(em_x270_usb_ldo); regulator_enable(em_x270_usb_ldo);
gpio_set_value(usb_hub_reset, 1);
gpio_set_value(usb_hub_reset, 0); gpio_set_value(usb_hub_reset, 0);
gpio_set_value(usb_hub_reset, 1);
regulator_disable(em_x270_usb_ldo); regulator_disable(em_x270_usb_ldo);
regulator_enable(em_x270_usb_ldo); regulator_enable(em_x270_usb_ldo);
gpio_set_value(usb_hub_reset, 1); gpio_set_value(usb_hub_reset, 0);
gpio_set_value(GPIO9_USB_VBUS_EN, 1);
/* enable VBUS */
gpio_direction_output(GPIO9_USB_VBUS_EN, 1);
return 0; return 0;
......
arch/arm/mach-pxa/include/mach/arcom-pcmcia.h 0 → 100644
View file @ af853e63
#ifndef __ARCOM_PCMCIA_H
#define __ARCOM_PCMCIA_H
struct arcom_pcmcia_pdata {
int cd_gpio;
int rdy_gpio;
int pwr_gpio;
void (*reset)(int state);
};
#endif
arch/arm/mach-pxa/include/mach/viper.h
View file @ af853e63
...@@ -85,8 +85,6 @@ ...@@ -85,8 +85,6 @@
/* Interrupt and Configuration Register (VIPER_ICR) */ /* Interrupt and Configuration Register (VIPER_ICR) */
/* This is a write only register. Only CF_RST is used under Linux */ /* This is a write only register. Only CF_RST is used under Linux */
extern void viper_cf_rst(int state);
#define VIPER_ICR_RETRIG (1 << 0) #define VIPER_ICR_RETRIG (1 << 0)
#define VIPER_ICR_AUTO_CLR (1 << 1) #define VIPER_ICR_AUTO_CLR (1 << 1)
#define VIPER_ICR_R_DIS (1 << 2) #define VIPER_ICR_R_DIS (1 << 2)
......
arch/arm/mach-pxa/include/mach/zeus.h 0 → 100644
View file @ af853e63
/*
* arch/arm/mach-pxa/include/mach/zeus.h
*
* Author: David Vrabel
* Created: Sept 28, 2005
* Copyright: Arcom Control Systems Ltd.
*
* Maintained by: Marc Zyngier <maz@misterjones.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef _MACH_ZEUS_H
#define _MACH_ZEUS_H
/* Physical addresses */
#define ZEUS_FLASH_PHYS PXA_CS0_PHYS
#define ZEUS_ETH0_PHYS PXA_CS1_PHYS
#define ZEUS_ETH1_PHYS PXA_CS2_PHYS
#define ZEUS_CPLD_PHYS (PXA_CS4_PHYS+0x2000000)
#define ZEUS_SRAM_PHYS PXA_CS5_PHYS
#define ZEUS_PC104IO_PHYS (0x30000000)
#define ZEUS_CPLD_VERSION_PHYS (ZEUS_CPLD_PHYS + 0x00000000)
#define ZEUS_CPLD_ISA_IRQ_PHYS (ZEUS_CPLD_PHYS + 0x00800000)
#define ZEUS_CPLD_CONTROL_PHYS (ZEUS_CPLD_PHYS + 0x01000000)
#define ZEUS_CPLD_EXTWDOG_PHYS (ZEUS_CPLD_PHYS + 0x01800000)
/* GPIOs */
#define ZEUS_AC97_GPIO 0
#define ZEUS_WAKEUP_GPIO 1
#define ZEUS_UARTA_GPIO 9
#define ZEUS_UARTB_GPIO 10
#define ZEUS_UARTC_GPIO 12
#define ZEUS_UARTD_GPIO 11
#define ZEUS_ETH0_GPIO 14
#define ZEUS_ISA_GPIO 17
#define ZEUS_BKLEN_GPIO 19
#define ZEUS_USB2_PWREN_GPIO 22
#define ZEUS_PTT_GPIO 27
#define ZEUS_CF_CD_GPIO 35
#define ZEUS_MMC_WP_GPIO 52
#define ZEUS_MMC_CD_GPIO 53
#define ZEUS_EXTGPIO_GPIO 91
#define ZEUS_CF_PWEN_GPIO 97
#define ZEUS_CF_RDY_GPIO 99
#define ZEUS_LCD_EN_GPIO 101
#define ZEUS_ETH1_GPIO 113
#define ZEUS_CAN_GPIO 116
#define ZEUS_EXT0_GPIO_BASE 128
#define ZEUS_EXT1_GPIO_BASE 160
#define ZEUS_USER_GPIO_BASE 192
#define ZEUS_EXT0_GPIO(x) (ZEUS_EXT0_GPIO_BASE + (x))
#define ZEUS_EXT1_GPIO(x) (ZEUS_EXT1_GPIO_BASE + (x))
#define ZEUS_USER_GPIO(x) (ZEUS_USER_GPIO_BASE + (x))
/*
* CPLD registers:
* Only 4 registers, but spreaded over a 32MB address space.
* Be gentle, and remap that over 32kB...
*/
#define ZEUS_CPLD (0xf0000000)
#define ZEUS_CPLD_VERSION (ZEUS_CPLD + 0x0000)
#define ZEUS_CPLD_ISA_IRQ (ZEUS_CPLD + 0x1000)
#define ZEUS_CPLD_CONTROL (ZEUS_CPLD + 0x2000)
#define ZEUS_CPLD_EXTWDOG (ZEUS_CPLD + 0x3000)
/* CPLD register bits */
#define ZEUS_CPLD_CONTROL_CF_RST 0x01
#define ZEUS_PC104IO (0xf1000000)
#define ZEUS_SRAM_SIZE (256 * 1024)
#endif
arch/arm/mach-pxa/viper.c
View file @ af853e63
...@@ -47,6 +47,7 @@ ...@@ -47,6 +47,7 @@
#include <mach/pxafb.h> #include <mach/pxafb.h>
#include <plat/i2c.h> #include <plat/i2c.h>
#include <mach/regs-uart.h> #include <mach/regs-uart.h>
#include <mach/arcom-pcmcia.h>
#include <mach/viper.h> #include <mach/viper.h>
#include <asm/setup.h> #include <asm/setup.h>
...@@ -76,14 +77,28 @@ static void viper_icr_clear_bit(unsigned int bit) ...@@ -76,14 +77,28 @@ static void viper_icr_clear_bit(unsigned int bit)
} }
/* This function is used from the pcmcia module to reset the CF */ /* This function is used from the pcmcia module to reset the CF */
void viper_cf_rst(int state) static void viper_cf_reset(int state)
{ {
if (state) if (state)
viper_icr_set_bit(VIPER_ICR_CF_RST); viper_icr_set_bit(VIPER_ICR_CF_RST);
else else
viper_icr_clear_bit(VIPER_ICR_CF_RST); viper_icr_clear_bit(VIPER_ICR_CF_RST);
} }
EXPORT_SYMBOL(viper_cf_rst);
static struct arcom_pcmcia_pdata viper_pcmcia_info = {
.cd_gpio = VIPER_CF_CD_GPIO,
.rdy_gpio = VIPER_CF_RDY_GPIO,
.pwr_gpio = VIPER_CF_POWER_GPIO,
.reset = viper_cf_reset,
};
static struct platform_device viper_pcmcia_device = {
.name = "viper-pcmcia",
.id = -1,
.dev = {
.platform_data = &viper_pcmcia_info,
},
};
/* /*
* The CPLD version register was not present on VIPER boards prior to * The CPLD version register was not present on VIPER boards prior to
...@@ -685,6 +700,7 @@ static struct platform_device *viper_devs[] __initdata = { ...@@ -685,6 +700,7 @@ static struct platform_device *viper_devs[] __initdata = {
&viper_mtd_devices[0], &viper_mtd_devices[0],
&viper_mtd_devices[1], &viper_mtd_devices[1],
&viper_backlight_device, &viper_backlight_device,
&viper_pcmcia_device,
}; };
static mfp_cfg_t viper_pin_config[] __initdata = { static mfp_cfg_t viper_pin_config[] __initdata = {
......
arch/arm/mach-pxa/zeus.c 0 → 100644
View file @ af853e63
/*
* Support for the Arcom ZEUS.
*
* Copyright (C) 2006 Arcom Control Systems Ltd.
*
* Loosely based on Arcom's 2.6.16.28.
* Maintained by Marc Zyngier <maz@misterjones.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/cpufreq.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/pm.h>
#include <linux/gpio.h>
#include <linux/serial_8250.h>
#include <linux/dm9000.h>
#include <linux/mmc/host.h>
#include <linux/spi/spi.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <linux/i2c.h>
#include <linux/i2c/pca953x.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <plat/i2c.h>
#include <mach/pxa2xx-regs.h>
#include <mach/regs-uart.h>
#include <mach/ohci.h>
#include <mach/mmc.h>
#include <mach/pxa27x-udc.h>
#include <mach/udc.h>
#include <mach/pxafb.h>
#include <mach/pxa2xx_spi.h>
#include <mach/mfp-pxa27x.h>
#include <mach/pm.h>
#include <mach/audio.h>
#include <mach/arcom-pcmcia.h>
#include <mach/zeus.h>
#include "generic.h"
/*
* Interrupt handling
*/
static unsigned long zeus_irq_enabled_mask;
static const int zeus_isa_irqs[] = { 3, 4, 5, 6, 7, 10, 11, 12, };
static const int zeus_isa_irq_map[] = {
0, /* ISA irq #0, invalid */
0, /* ISA irq #1, invalid */
0, /* ISA irq #2, invalid */
1 << 0, /* ISA irq #3 */
1 << 1, /* ISA irq #4 */
1 << 2, /* ISA irq #5 */
1 << 3, /* ISA irq #6 */
1 << 4, /* ISA irq #7 */
0, /* ISA irq #8, invalid */
0, /* ISA irq #9, invalid */
1 << 5, /* ISA irq #10 */
1 << 6, /* ISA irq #11 */
1 << 7, /* ISA irq #12 */
};
static inline int zeus_irq_to_bitmask(unsigned int irq)
{
return zeus_isa_irq_map[irq - PXA_ISA_IRQ(0)];
}
static inline int zeus_bit_to_irq(int bit)
{
return zeus_isa_irqs[bit] + PXA_ISA_IRQ(0);
}
static void zeus_ack_irq(unsigned int irq)
{
__raw_writew(zeus_irq_to_bitmask(irq), ZEUS_CPLD_ISA_IRQ);
}
static void zeus_mask_irq(unsigned int irq)
{
zeus_irq_enabled_mask &= ~(zeus_irq_to_bitmask(irq));
}
static void zeus_unmask_irq(unsigned int irq)
{
zeus_irq_enabled_mask |= zeus_irq_to_bitmask(irq);
}
static inline unsigned long zeus_irq_pending(void)
{
return __raw_readw(ZEUS_CPLD_ISA_IRQ) & zeus_irq_enabled_mask;
}
static void zeus_irq_handler(unsigned int irq, struct irq_desc *desc)
{
unsigned long pending;
pending = zeus_irq_pending();
do {
/* we're in a chained irq handler,
* so ack the interrupt by hand */
desc->chip->ack(gpio_to_irq(ZEUS_ISA_GPIO));
if (likely(pending)) {
irq = zeus_bit_to_irq(__ffs(pending));
generic_handle_irq(irq);
}
pending = zeus_irq_pending();
} while (pending);
}
static struct irq_chip zeus_irq_chip = {
.name = "ISA",
.ack = zeus_ack_irq,
.mask = zeus_mask_irq,
.unmask = zeus_unmask_irq,
};
static void __init zeus_init_irq(void)
{
int level;
int isa_irq;
pxa27x_init_irq();
/* Peripheral IRQs. It would be nice to move those inside driver
configuration, but it is not supported at the moment. */
set_irq_type(gpio_to_irq(ZEUS_AC97_GPIO), IRQ_TYPE_EDGE_RISING);
set_irq_type(gpio_to_irq(ZEUS_WAKEUP_GPIO), IRQ_TYPE_EDGE_RISING);
set_irq_type(gpio_to_irq(ZEUS_PTT_GPIO), IRQ_TYPE_EDGE_RISING);
set_irq_type(gpio_to_irq(ZEUS_EXTGPIO_GPIO), IRQ_TYPE_EDGE_FALLING);
set_irq_type(gpio_to_irq(ZEUS_CAN_GPIO), IRQ_TYPE_EDGE_FALLING);
/* Setup ISA IRQs */
for (level = 0; level < ARRAY_SIZE(zeus_isa_irqs); level++) {
isa_irq = zeus_bit_to_irq(level);
set_irq_chip(isa_irq, &zeus_irq_chip);
set_irq_handler(isa_irq, handle_edge_irq);
set_irq_flags(isa_irq, IRQF_VALID | IRQF_PROBE);
}
set_irq_type(gpio_to_irq(ZEUS_ISA_GPIO), IRQ_TYPE_EDGE_RISING);
set_irq_chained_handler(gpio_to_irq(ZEUS_ISA_GPIO), zeus_irq_handler);
}
/*
* Platform devices
*/
/* Flash */
static struct resource zeus_mtd_resources[] = {
[0] = { /* NOR Flash (up to 64MB) */
.start = ZEUS_FLASH_PHYS,
.end = ZEUS_FLASH_PHYS + SZ_64M - 1,
.flags = IORESOURCE_MEM,
},
[1] = { /* SRAM */
.start = ZEUS_SRAM_PHYS,
.end = ZEUS_SRAM_PHYS + SZ_512K - 1,
.flags = IORESOURCE_MEM,
},
};
static struct physmap_flash_data zeus_flash_data[] = {
[0] = {
.width = 2,
.parts = NULL,
.nr_parts = 0,
},
};
static struct platform_device zeus_mtd_devices[] = {
[0] = {
.name = "physmap-flash",
.id = 0,
.dev = {
.platform_data = &zeus_flash_data[0],
},
.resource = &zeus_mtd_resources[0],
.num_resources = 1,
},
};
/* Serial */
static struct resource zeus_serial_resources[] = {
{
.start = 0x10000000,
.end = 0x1000000f,
.flags = IORESOURCE_MEM,
},
{
.start = 0x10800000,
.end = 0x1080000f,
.flags = IORESOURCE_MEM,
},
{
.start = 0x11000000,
.end = 0x1100000f,
.flags = IORESOURCE_MEM,
},
{
.start = 0x40100000,
.end = 0x4010001f,
.flags = IORESOURCE_MEM,
},
{
.start = 0x40200000,
.end = 0x4020001f,
.flags = IORESOURCE_MEM,
},
{
.start = 0x40700000,
.end = 0x4070001f,
.flags = IORESOURCE_MEM,
},
};
static struct plat_serial8250_port serial_platform_data[] = {
/* External UARTs */
/* FIXME: Shared IRQs on COM1-COM4 will not work properly on v1i1 hardware. */
{ /* COM1 */
.mapbase = 0x10000000,
.irq = gpio_to_irq(ZEUS_UARTA_GPIO),
.irqflags = IRQF_TRIGGER_RISING,
.uartclk = 14745600,
.regshift = 1,
.flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
.iotype = UPIO_MEM,
},
{ /* COM2 */
.mapbase = 0x10800000,
.irq = gpio_to_irq(ZEUS_UARTB_GPIO),
.irqflags = IRQF_TRIGGER_RISING,
.uartclk = 14745600,
.regshift = 1,
.flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
.iotype = UPIO_MEM,
},
{ /* COM3 */
.mapbase = 0x11000000,
.irq = gpio_to_irq(ZEUS_UARTC_GPIO),
.irqflags = IRQF_TRIGGER_RISING,
.uartclk = 14745600,
.regshift = 1,
.flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
.iotype = UPIO_MEM,
},
{ /* COM4 */
.mapbase = 0x11800000,
.irq = gpio_to_irq(ZEUS_UARTD_GPIO),
.irqflags = IRQF_TRIGGER_RISING,
.uartclk = 14745600,
.regshift = 1,
.flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
.iotype = UPIO_MEM,
},
/* Internal UARTs */
{ /* FFUART */
.membase = (void *)&FFUART,
.mapbase = __PREG(FFUART),
.irq = IRQ_FFUART,
.uartclk = 921600 * 16,
.regshift = 2,
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
.iotype = UPIO_MEM,
},
{ /* BTUART */
.membase = (void *)&BTUART,
.mapbase = __PREG(BTUART),
.irq = IRQ_BTUART,
.uartclk = 921600 * 16,
.regshift = 2,
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
.iotype = UPIO_MEM,
},
{ /* STUART */
.membase = (void *)&STUART,
.mapbase = __PREG(STUART),
.irq = IRQ_STUART,
.uartclk = 921600 * 16,
.regshift = 2,
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
.iotype = UPIO_MEM,
},
{ },
};
static struct platform_device zeus_serial_device = {
.name = "serial8250",
.id = PLAT8250_DEV_PLATFORM,
.dev = {
.platform_data = serial_platform_data,
},
.num_resources = ARRAY_SIZE(zeus_serial_resources),
.resource = zeus_serial_resources,
};
/* Ethernet */
static struct resource zeus_dm9k0_resource[] = {
[0] = {
.start = ZEUS_ETH0_PHYS,
.end = ZEUS_ETH0_PHYS + 1,
.flags = IORESOURCE_MEM
},
[1] = {
.start = ZEUS_ETH0_PHYS + 2,
.end = ZEUS_ETH0_PHYS + 3,
.flags = IORESOURCE_MEM
},
[2] = {
.start = gpio_to_irq(ZEUS_ETH0_GPIO),
.end = gpio_to_irq(ZEUS_ETH0_GPIO),
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
},
};
static struct resource zeus_dm9k1_resource[] = {
[0] = {
.start = ZEUS_ETH1_PHYS,
.end = ZEUS_ETH1_PHYS + 1,
.flags = IORESOURCE_MEM
},
[1] = {
.start = ZEUS_ETH1_PHYS + 2,
.end = ZEUS_ETH1_PHYS + 3,
.flags = IORESOURCE_MEM,
},
[2] = {
.start = gpio_to_irq(ZEUS_ETH1_GPIO),
.end = gpio_to_irq(ZEUS_ETH1_GPIO),
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
},
};
static struct dm9000_plat_data zeus_dm9k_platdata = {
.flags = DM9000_PLATF_16BITONLY,
};
static struct platform_device zeus_dm9k0_device = {
.name = "dm9000",
.id = 0,
.num_resources = ARRAY_SIZE(zeus_dm9k0_resource),
.resource = zeus_dm9k0_resource,
.dev = {
.platform_data = &zeus_dm9k_platdata,
}
};
static struct platform_device zeus_dm9k1_device = {
.name = "dm9000",
.id = 1,
.num_resources = ARRAY_SIZE(zeus_dm9k1_resource),
.resource = zeus_dm9k1_resource,
.dev = {
.platform_data = &zeus_dm9k_platdata,
}
};
/* External SRAM */
static struct resource zeus_sram_resource = {
.start = ZEUS_SRAM_PHYS,
.end = ZEUS_SRAM_PHYS + ZEUS_SRAM_SIZE * 2 - 1,
.flags = IORESOURCE_MEM,
};
static struct platform_device zeus_sram_device = {
.name = "pxa2xx-8bit-sram",
.id = 0,
.num_resources = 1,
.resource = &zeus_sram_resource,
};
/* SPI interface on SSP3 */
static struct pxa2xx_spi_master pxa2xx_spi_ssp3_master_info = {
.num_chipselect = 1,
.enable_dma = 1,
};
static struct platform_device pxa2xx_spi_ssp3_device = {
.name = "pxa2xx-spi",
.id = 3,
.dev = {
.platform_data = &pxa2xx_spi_ssp3_master_info,
},
};
/* Leds */
static struct gpio_led zeus_leds[] = {
[0] = {
.name = "zeus:yellow:1",
.default_trigger = "heartbeat",
.gpio = ZEUS_EXT0_GPIO(3),
.active_low = 1,
},
[1] = {
.name = "zeus:yellow:2",
.default_trigger = "default-on",
.gpio = ZEUS_EXT0_GPIO(4),
.active_low = 1,
},
[2] = {
.name = "zeus:yellow:3",
.default_trigger = "default-on",
.gpio = ZEUS_EXT0_GPIO(5),
.active_low = 1,
},
};
static struct gpio_led_platform_data zeus_leds_info = {
.leds = zeus_leds,
.num_leds = ARRAY_SIZE(zeus_leds),
};
static struct platform_device zeus_leds_device = {
.name = "leds-gpio",
.id = -1,
.dev = {
.platform_data = &zeus_leds_info,
},
};
static void zeus_cf_reset(int state)
{
u16 cpld_state = __raw_readw(ZEUS_CPLD_CONTROL);
if (state)
cpld_state |= ZEUS_CPLD_CONTROL_CF_RST;
else
cpld_state &= ~ZEUS_CPLD_CONTROL_CF_RST;
__raw_writew(cpld_state, ZEUS_CPLD_CONTROL);
}
static struct arcom_pcmcia_pdata zeus_pcmcia_info = {
.cd_gpio = ZEUS_CF_CD_GPIO,
.rdy_gpio = ZEUS_CF_RDY_GPIO,
.pwr_gpio = ZEUS_CF_PWEN_GPIO,
.reset = zeus_cf_reset,
};
static struct platform_device zeus_pcmcia_device = {
.name = "zeus-pcmcia",
.id = -1,
.dev = {
.platform_data = &zeus_pcmcia_info,
},
};
static struct platform_device *zeus_devices[] __initdata = {
&zeus_serial_device,
&zeus_mtd_devices[0],
&zeus_dm9k0_device,
&zeus_dm9k1_device,
&zeus_sram_device,
&pxa2xx_spi_ssp3_device,
&zeus_leds_device,
&zeus_pcmcia_device,
};
/* AC'97 */
static pxa2xx_audio_ops_t zeus_ac97_info = {
.reset_gpio = 95,
};
/*
* USB host
*/
static int zeus_ohci_init(struct device *dev)
{
int err;
/* Switch on port 2. */
if ((err = gpio_request(ZEUS_USB2_PWREN_GPIO, "USB2_PWREN"))) {
dev_err(dev, "Can't request USB2_PWREN\n");
return err;
}
if ((err = gpio_direction_output(ZEUS_USB2_PWREN_GPIO, 1))) {
gpio_free(ZEUS_USB2_PWREN_GPIO);
dev_err(dev, "Can't enable USB2_PWREN\n");
return err;
}
/* Port 2 is shared between host and client interface. */
UP2OCR = UP2OCR_HXOE | UP2OCR_HXS | UP2OCR_DMPDE | UP2OCR_DPPDE;
return 0;
}
static void zeus_ohci_exit(struct device *dev)
{
/* Power-off port 2 */
gpio_direction_output(ZEUS_USB2_PWREN_GPIO, 0);
gpio_free(ZEUS_USB2_PWREN_GPIO);
}
static struct pxaohci_platform_data zeus_ohci_platform_data = {
.port_mode = PMM_NPS_MODE,
.flags = ENABLE_PORT_ALL | POWER_CONTROL_LOW | POWER_SENSE_LOW,
.init = zeus_ohci_init,
.exit = zeus_ohci_exit,
};
/*
* Flat Panel
*/
static void zeus_lcd_power(int on, struct fb_var_screeninfo *si)
{
gpio_set_value(ZEUS_LCD_EN_GPIO, on);
}
static void zeus_backlight_power(int on)
{
gpio_set_value(ZEUS_BKLEN_GPIO, on);
}
static int zeus_setup_fb_gpios(void)
{
int err;
if ((err = gpio_request(ZEUS_LCD_EN_GPIO, "LCD_EN")))
goto out_err;
if ((err = gpio_direction_output(ZEUS_LCD_EN_GPIO, 0)))
goto out_err_lcd;
if ((err = gpio_request(ZEUS_BKLEN_GPIO, "BKLEN")))
goto out_err_lcd;
if ((err = gpio_direction_output(ZEUS_BKLEN_GPIO, 0)))
goto out_err_bkl;
return 0;
out_err_bkl:
gpio_free(ZEUS_BKLEN_GPIO);
out_err_lcd:
gpio_free(ZEUS_LCD_EN_GPIO);
out_err:
return err;
}
static struct pxafb_mode_info zeus_fb_mode_info[] = {
{
.pixclock = 39722,
.xres = 640,
.yres = 480,
.bpp = 16,
.hsync_len = 63,
.left_margin = 16,
.right_margin = 81,
.vsync_len = 2,
.upper_margin = 12,
.lower_margin = 31,
.sync = 0,
},
};
static struct pxafb_mach_info zeus_fb_info = {
.modes = zeus_fb_mode_info,
.num_modes = 1,
.lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
.pxafb_lcd_power = zeus_lcd_power,
.pxafb_backlight_power = zeus_backlight_power,
};
/*
* MMC/SD Device
*
* The card detect interrupt isn't debounced so we delay it by 250ms
* to give the card a chance to fully insert/eject.
*/
static struct pxamci_platform_data zeus_mci_platform_data = {
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
.detect_delay = HZ/4,
.gpio_card_detect = ZEUS_MMC_CD_GPIO,
.gpio_card_ro = ZEUS_MMC_WP_GPIO,
.gpio_card_ro_invert = 1,
.gpio_power = -1
};
/*
* USB Device Controller
*/
static void zeus_udc_command(int cmd)
{
switch (cmd) {
case PXA2XX_UDC_CMD_DISCONNECT:
pr_info("zeus: disconnecting USB client\n");
UP2OCR = UP2OCR_HXOE | UP2OCR_HXS | UP2OCR_DMPDE | UP2OCR_DPPDE;
break;
case PXA2XX_UDC_CMD_CONNECT:
pr_info("zeus: connecting USB client\n");
UP2OCR = UP2OCR_HXOE | UP2OCR_DPPUE;
break;
}
}
static struct pxa2xx_udc_mach_info zeus_udc_info = {
.udc_command = zeus_udc_command,
};
static void zeus_power_off(void)
{
local_irq_disable();
pxa27x_cpu_suspend(PWRMODE_DEEPSLEEP);
}
int zeus_get_pcb_info(struct i2c_client *client, unsigned gpio,
unsigned ngpio, void *context)
{
int i;
u8 pcb_info = 0;
for (i = 0; i < 8; i++) {
int pcb_bit = gpio + i + 8;
if (gpio_request(pcb_bit, "pcb info")) {
dev_err(&client->dev, "Can't request pcb info %d\n", i);
continue;
}
if (gpio_direction_input(pcb_bit)) {
dev_err(&client->dev, "Can't read pcb info %d\n", i);
gpio_free(pcb_bit);
continue;
}
pcb_info |= !!gpio_get_value(pcb_bit) << i;
gpio_free(pcb_bit);
}
dev_info(&client->dev, "Zeus PCB version %d issue %d\n",
pcb_info >> 4, pcb_info & 0xf);
return 0;
}
static struct pca953x_platform_data zeus_pca953x_pdata[] = {
[0] = { .gpio_base = ZEUS_EXT0_GPIO_BASE, },
[1] = {
.gpio_base = ZEUS_EXT1_GPIO_BASE,
.setup = zeus_get_pcb_info,
},
[2] = { .gpio_base = ZEUS_USER_GPIO_BASE, },
};
static struct i2c_board_info __initdata zeus_i2c_devices[] = {
{
I2C_BOARD_INFO("pca9535", 0x21),
.platform_data = &zeus_pca953x_pdata[0],
},
{
I2C_BOARD_INFO("pca9535", 0x22),
.platform_data = &zeus_pca953x_pdata[1],
},
{
I2C_BOARD_INFO("pca9535", 0x20),
.platform_data = &zeus_pca953x_pdata[2],
.irq = gpio_to_irq(ZEUS_EXTGPIO_GPIO),
},
{ I2C_BOARD_INFO("lm75a", 0x48) },
{ I2C_BOARD_INFO("24c01", 0x50) },
{ I2C_BOARD_INFO("isl1208", 0x6f) },
};
static mfp_cfg_t zeus_pin_config[] __initdata = {
GPIO15_nCS_1,
GPIO78_nCS_2,
GPIO80_nCS_4,
GPIO33_nCS_5,
GPIO22_GPIO,
GPIO32_MMC_CLK,
GPIO92_MMC_DAT_0,
GPIO109_MMC_DAT_1,
GPIO110_MMC_DAT_2,
GPIO111_MMC_DAT_3,
GPIO112_MMC_CMD,
GPIO88_USBH1_PWR,
GPIO89_USBH1_PEN,
GPIO119_USBH2_PWR,
GPIO120_USBH2_PEN,
GPIO86_LCD_LDD_16,
GPIO87_LCD_LDD_17,
GPIO102_GPIO,
GPIO104_CIF_DD_2,
GPIO105_CIF_DD_1,
GPIO48_nPOE,
GPIO49_nPWE,
GPIO50_nPIOR,
GPIO51_nPIOW,
GPIO85_nPCE_1,
GPIO54_nPCE_2,
GPIO79_PSKTSEL,
GPIO55_nPREG,
GPIO56_nPWAIT,
GPIO57_nIOIS16,
GPIO36_GPIO, /* CF CD */
GPIO97_GPIO, /* CF PWREN */
GPIO99_GPIO, /* CF RDY */
};
static void __init zeus_init(void)
{
u16 dm9000_msc = 0xe279;
system_rev = __raw_readw(ZEUS_CPLD_VERSION);
pr_info("Zeus CPLD V%dI%d\n", (system_rev & 0xf0) >> 4, (system_rev & 0x0f));
/* Fix timings for dm9000s (CS1/CS2)*/
MSC0 = (MSC0 & 0xffff) | (dm9000_msc << 16);
MSC1 = (MSC1 & 0xffff0000) | dm9000_msc;
pm_power_off = zeus_power_off;
pxa2xx_mfp_config(ARRAY_AND_SIZE(zeus_pin_config));
platform_add_devices(zeus_devices, ARRAY_SIZE(zeus_devices));
pxa_set_ohci_info(&zeus_ohci_platform_data);
if (zeus_setup_fb_gpios())
pr_err("Failed to setup fb gpios\n");
else
set_pxa_fb_info(&zeus_fb_info);
pxa_set_mci_info(&zeus_mci_platform_data);
pxa_set_udc_info(&zeus_udc_info);
pxa_set_ac97_info(&zeus_ac97_info);
pxa_set_i2c_info(NULL);
i2c_register_board_info(0, ARRAY_AND_SIZE(zeus_i2c_devices));
}
static struct map_desc zeus_io_desc[] __initdata = {
{
.virtual = ZEUS_CPLD_VERSION,
.pfn = __phys_to_pfn(ZEUS_CPLD_VERSION_PHYS),
.length = 0x1000,
.type = MT_DEVICE,
},
{
.virtual = ZEUS_CPLD_ISA_IRQ,
.pfn = __phys_to_pfn(ZEUS_CPLD_ISA_IRQ_PHYS),
.length = 0x1000,
.type = MT_DEVICE,
},
{
.virtual = ZEUS_CPLD_CONTROL,
.pfn = __phys_to_pfn(ZEUS_CPLD_CONTROL_PHYS),
.length = 0x1000,
.type = MT_DEVICE,
},
{
.virtual = ZEUS_CPLD_EXTWDOG,
.pfn = __phys_to_pfn(ZEUS_CPLD_EXTWDOG_PHYS),
.length = 0x1000,
.type = MT_DEVICE,
},
{
.virtual = ZEUS_PC104IO,
.pfn = __phys_to_pfn(ZEUS_PC104IO_PHYS),
.length = 0x00800000,
.type = MT_DEVICE,
},
};
static void __init zeus_map_io(void)
{
pxa_map_io();
iotable_init(zeus_io_desc, ARRAY_SIZE(zeus_io_desc));
/* Clear PSPR to ensure a full restart on wake-up. */
PMCR = PSPR = 0;
/* enable internal 32.768Khz oscillator (ignore OSCC_OOK) */
OSCC |= OSCC_OON;
/* Some clock cycles later (from OSCC_ON), programme PCFR (OPDE...).
* float chip selects and PCMCIA */
PCFR = PCFR_OPDE | PCFR_DC_EN | PCFR_FS | PCFR_FP;
}
MACHINE_START(ARCOM_ZEUS, "Arcom ZEUS")
/* Maintainer: Marc Zyngier <maz@misterjones.org> */
.phys_io = 0x40000000,
.io_pg_offst = ((io_p2v(0x40000000) >> 18) & 0xfffc),
.boot_params = 0xa0000100,
.map_io = zeus_map_io,
.init_irq = zeus_init_irq,
.timer = &pxa_timer,
.init_machine = zeus_init,
MACHINE_END
arch/arm/mach-realview/Kconfig
View file @ af853e63
...@@ -70,7 +70,7 @@ config MACH_REALVIEW_PBX ...@@ -70,7 +70,7 @@ config MACH_REALVIEW_PBX
bool "Support RealView/PBX platform" bool "Support RealView/PBX platform"
select ARM_GIC select ARM_GIC
select HAVE_PATA_PLATFORM select HAVE_PATA_PLATFORM
select ARCH_SPARSEMEM_ENABLE if CPU_V7 && !HIGH_PHYS_OFFSET select ARCH_SPARSEMEM_ENABLE if CPU_V7 && !REALVIEW_HIGH_PHYS_OFFSET
select ZONE_DMA if SPARSEMEM select ZONE_DMA if SPARSEMEM
help help
Include support for the ARM(R) RealView PBX platform. Include support for the ARM(R) RealView PBX platform.
......
arch/arm/mach-s3c24a0/include/mach/memory.h
View file @ af853e63
...@@ -15,5 +15,7 @@ ...@@ -15,5 +15,7 @@
#define __virt_to_bus(x) __virt_to_phys(x) #define __virt_to_bus(x) __virt_to_phys(x)
#define __bus_to_virt(x) __phys_to_virt(x) #define __bus_to_virt(x) __phys_to_virt(x)
#define __pfn_to_bus(x) __pfn_to_phys(x)
#define __bus_to_pfn(x) __phys_to_pfn(x)
#endif #endif
arch/arm/mach-sa1100/Kconfig
View file @ af853e63
...@@ -4,6 +4,7 @@ menu "SA11x0 Implementations" ...@@ -4,6 +4,7 @@ menu "SA11x0 Implementations"
config SA1100_ASSABET config SA1100_ASSABET
bool "Assabet" bool "Assabet"
select CPU_FREQ_SA1110
help help
Say Y here if you are using the Intel(R) StrongARM(R) SA-1110 Say Y here if you are using the Intel(R) StrongARM(R) SA-1110
Microprocessor Development Board (also known as the Assabet). Microprocessor Development Board (also known as the Assabet).
...@@ -19,6 +20,7 @@ config ASSABET_NEPONSET ...@@ -19,6 +20,7 @@ config ASSABET_NEPONSET
config SA1100_CERF config SA1100_CERF
bool "CerfBoard" bool "CerfBoard"
select CPU_FREQ_SA1110
help help
The Intrinsyc CerfBoard is based on the StrongARM 1110 (Discontinued). The Intrinsyc CerfBoard is based on the StrongARM 1110 (Discontinued).
More information is available at: More information is available at:
...@@ -45,6 +47,7 @@ endchoice ...@@ -45,6 +47,7 @@ endchoice
config SA1100_COLLIE config SA1100_COLLIE
bool "Sharp Zaurus SL5500" bool "Sharp Zaurus SL5500"
# FIXME: select CPU_FREQ_SA11x0
select SHARP_LOCOMO select SHARP_LOCOMO
select SHARP_SCOOP select SHARP_SCOOP
select SHARP_PARAM select SHARP_PARAM
...@@ -54,6 +57,7 @@ config SA1100_COLLIE ...@@ -54,6 +57,7 @@ config SA1100_COLLIE
config SA1100_H3100 config SA1100_H3100
bool "Compaq iPAQ H3100" bool "Compaq iPAQ H3100"
select HTC_EGPIO select HTC_EGPIO
select CPU_FREQ_SA1100
help help
Say Y here if you intend to run this kernel on the Compaq iPAQ Say Y here if you intend to run this kernel on the Compaq iPAQ
H3100 handheld computer. Information about this machine and the H3100 handheld computer. Information about this machine and the
...@@ -64,6 +68,7 @@ config SA1100_H3100 ...@@ -64,6 +68,7 @@ config SA1100_H3100
config SA1100_H3600 config SA1100_H3600
bool "Compaq iPAQ H3600/H3700" bool "Compaq iPAQ H3600/H3700"
select HTC_EGPIO select HTC_EGPIO
select CPU_FREQ_SA1100
help help
Say Y here if you intend to run this kernel on the Compaq iPAQ Say Y here if you intend to run this kernel on the Compaq iPAQ
H3600 handheld computer. Information about this machine and the H3600 handheld computer. Information about this machine and the
...@@ -74,6 +79,7 @@ config SA1100_H3600 ...@@ -74,6 +79,7 @@ config SA1100_H3600
config SA1100_BADGE4 config SA1100_BADGE4
bool "HP Labs BadgePAD 4" bool "HP Labs BadgePAD 4"
select SA1111 select SA1111
select CPU_FREQ_SA1100
help help
Say Y here if you want to build a kernel for the HP Laboratories Say Y here if you want to build a kernel for the HP Laboratories
BadgePAD 4. BadgePAD 4.
...@@ -81,6 +87,7 @@ config SA1100_BADGE4 ...@@ -81,6 +87,7 @@ config SA1100_BADGE4
config SA1100_JORNADA720 config SA1100_JORNADA720
bool "HP Jornada 720" bool "HP Jornada 720"
select SA1111 select SA1111
# FIXME: select CPU_FREQ_SA11x0
help help
Say Y here if you want to build a kernel for the HP Jornada 720 Say Y here if you want to build a kernel for the HP Jornada 720
handheld computer. See <http://www.hp.com/jornada/products/720> handheld computer. See <http://www.hp.com/jornada/products/720>
...@@ -98,12 +105,14 @@ config SA1100_JORNADA720_SSP ...@@ -98,12 +105,14 @@ config SA1100_JORNADA720_SSP
config SA1100_HACKKIT config SA1100_HACKKIT
bool "HackKit Core CPU Board" bool "HackKit Core CPU Board"
select CPU_FREQ_SA1100
help help
Say Y here to support the HackKit Core CPU Board Say Y here to support the HackKit Core CPU Board
<http://hackkit.eletztrick.de>; <http://hackkit.eletztrick.de>;
config SA1100_LART config SA1100_LART
bool "LART" bool "LART"
select CPU_FREQ_SA1100
help help
Say Y here if you are using the Linux Advanced Radio Terminal Say Y here if you are using the Linux Advanced Radio Terminal
(also known as the LART). See <http://www.lartmaker.nl/> for (also known as the LART). See <http://www.lartmaker.nl/> for
...@@ -111,6 +120,7 @@ config SA1100_LART ...@@ -111,6 +120,7 @@ config SA1100_LART
config SA1100_PLEB config SA1100_PLEB
bool "PLEB" bool "PLEB"
select CPU_FREQ_SA1100
help help
Say Y here if you are using version 1 of the Portable Linux Say Y here if you are using version 1 of the Portable Linux
Embedded Board (also known as PLEB). Embedded Board (also known as PLEB).
...@@ -119,6 +129,7 @@ config SA1100_PLEB ...@@ -119,6 +129,7 @@ config SA1100_PLEB
config SA1100_SHANNON config SA1100_SHANNON
bool "Shannon" bool "Shannon"
select CPU_FREQ_SA1100
help help
The Shannon (also known as a Tuxscreen, and also as a IS2630) was a The Shannon (also known as a Tuxscreen, and also as a IS2630) was a
limited edition webphone produced by Philips. The Shannon is a SA1100 limited edition webphone produced by Philips. The Shannon is a SA1100
...@@ -127,6 +138,7 @@ config SA1100_SHANNON ...@@ -127,6 +138,7 @@ config SA1100_SHANNON
config SA1100_SIMPAD config SA1100_SIMPAD
bool "Simpad" bool "Simpad"
select CPU_FREQ_SA1110
help help
The SIEMENS webpad SIMpad is based on the StrongARM 1110. There The SIEMENS webpad SIMpad is based on the StrongARM 1110. There
are two different versions CL4 and SL4. CL4 has 32MB RAM and 16MB are two different versions CL4 and SL4. CL4 has 32MB RAM and 16MB
...@@ -145,3 +157,4 @@ config SA1100_SSP ...@@ -145,3 +157,4 @@ config SA1100_SSP
endmenu endmenu
endif endif
arch/arm/mach-sa1100/generic.c
View file @ af853e63
...@@ -58,7 +58,6 @@ static const unsigned short cclk_frequency_100khz[NR_FREQS] = { ...@@ -58,7 +58,6 @@ static const unsigned short cclk_frequency_100khz[NR_FREQS] = {
2802 /* 280.2 MHz */ 2802 /* 280.2 MHz */
}; };
#if defined(CONFIG_CPU_FREQ_SA1100) || defined(CONFIG_CPU_FREQ_SA1110)
/* rounds up(!) */ /* rounds up(!) */
unsigned int sa11x0_freq_to_ppcr(unsigned int khz) unsigned int sa11x0_freq_to_ppcr(unsigned int khz)
{ {
...@@ -110,17 +109,6 @@ unsigned int sa11x0_getspeed(unsigned int cpu) ...@@ -110,17 +109,6 @@ unsigned int sa11x0_getspeed(unsigned int cpu)
return cclk_frequency_100khz[PPCR & 0xf] * 100; return cclk_frequency_100khz[PPCR & 0xf] * 100;
} }
#else
/*
* We still need to provide this so building without cpufreq works.
*/
unsigned int cpufreq_get(unsigned int cpu)
{
return cclk_frequency_100khz[PPCR & 0xf] * 100;
}
EXPORT_SYMBOL(cpufreq_get);
#endif
/* /*
* This is the SA11x0 sched_clock implementation. This has * This is the SA11x0 sched_clock implementation. This has
* a resolution of 271ns, and a maximum value of 32025597s (370 days). * a resolution of 271ns, and a maximum value of 32025597s (370 days).
......
arch/arm/vfp/vfpmodule.c
View file @ af853e63
...@@ -38,16 +38,72 @@ union vfp_state *last_VFP_context[NR_CPUS]; ...@@ -38,16 +38,72 @@ union vfp_state *last_VFP_context[NR_CPUS];
*/ */
unsigned int VFP_arch; unsigned int VFP_arch;
/*
* Per-thread VFP initialization.
*/
static void vfp_thread_flush(struct thread_info *thread)
{
union vfp_state *vfp = &thread->vfpstate;
unsigned int cpu;
memset(vfp, 0, sizeof(union vfp_state));
vfp->hard.fpexc = FPEXC_EN;
vfp->hard.fpscr = FPSCR_ROUND_NEAREST;
/*
* Disable VFP to ensure we initialize it first. We must ensure
* that the modification of last_VFP_context[] and hardware disable
* are done for the same CPU and without preemption.
*/
cpu = get_cpu();
if (last_VFP_context[cpu] == vfp)
last_VFP_context[cpu] = NULL;
fmxr(FPEXC, fmrx(FPEXC) & ~FPEXC_EN);
put_cpu();
}
static void vfp_thread_release(struct thread_info *thread)
{
/* release case: Per-thread VFP cleanup. */
union vfp_state *vfp = &thread->vfpstate;
unsigned int cpu = thread->cpu;
if (last_VFP_context[cpu] == vfp)
last_VFP_context[cpu] = NULL;
}
/*
* When this function is called with the following 'cmd's, the following
* is true while this function is being run:
* THREAD_NOFTIFY_SWTICH:
* - the previously running thread will not be scheduled onto another CPU.
* - the next thread to be run (v) will not be running on another CPU.
* - thread->cpu is the local CPU number
* - not preemptible as we're called in the middle of a thread switch
* THREAD_NOTIFY_FLUSH:
* - the thread (v) will be running on the local CPU, so
* v === current_thread_info()
* - thread->cpu is the local CPU number at the time it is accessed,
* but may change at any time.
* - we could be preempted if tree preempt rcu is enabled, so
* it is unsafe to use thread->cpu.
* THREAD_NOTIFY_RELEASE:
* - the thread (v) will not be running on any CPU; it is a dead thread.
* - thread->cpu will be the last CPU the thread ran on, which may not
* be the current CPU.
* - we could be preempted if tree preempt rcu is enabled.
*/
static int vfp_notifier(struct notifier_block *self, unsigned long cmd, void *v) static int vfp_notifier(struct notifier_block *self, unsigned long cmd, void *v)
{ {
struct thread_info *thread = v; struct thread_info *thread = v;
union vfp_state *vfp;
__u32 cpu = thread->cpu;
if (likely(cmd == THREAD_NOTIFY_SWITCH)) { if (likely(cmd == THREAD_NOTIFY_SWITCH)) {
u32 fpexc = fmrx(FPEXC); u32 fpexc = fmrx(FPEXC);
#ifdef CONFIG_SMP #ifdef CONFIG_SMP
unsigned int cpu = thread->cpu;
/* /*
* On SMP, if VFP is enabled, save the old state in * On SMP, if VFP is enabled, save the old state in
* case the thread migrates to a different CPU. The * case the thread migrates to a different CPU. The
...@@ -74,25 +130,10 @@ static int vfp_notifier(struct notifier_block *self, unsigned long cmd, void *v) ...@@ -74,25 +130,10 @@ static int vfp_notifier(struct notifier_block *self, unsigned long cmd, void *v)
return NOTIFY_DONE; return NOTIFY_DONE;
} }
vfp = &thread->vfpstate; if (cmd == THREAD_NOTIFY_FLUSH)
if (cmd == THREAD_NOTIFY_FLUSH) { vfp_thread_flush(thread);
/* else
* Per-thread VFP initialisation. vfp_thread_release(thread);
*/
memset(vfp, 0, sizeof(union vfp_state));
vfp->hard.fpexc = FPEXC_EN;
vfp->hard.fpscr = FPSCR_ROUND_NEAREST;
/*
* Disable VFP to ensure we initialise it first.
*/
fmxr(FPEXC, fmrx(FPEXC) & ~FPEXC_EN);
}
/* flush and release case: Per-thread VFP cleanup. */
if (last_VFP_context[cpu] == vfp)
last_VFP_context[cpu] = NULL;
return NOTIFY_DONE; return NOTIFY_DONE;
} }
......
drivers/pcmcia/Kconfig
View file @ af853e63
...@@ -208,7 +208,7 @@ config PCMCIA_PXA2XX ...@@ -208,7 +208,7 @@ config PCMCIA_PXA2XX
depends on ARM && ARCH_PXA && PCMCIA depends on ARM && ARCH_PXA && PCMCIA
depends on (ARCH_LUBBOCK || MACH_MAINSTONE || PXA_SHARPSL \ depends on (ARCH_LUBBOCK || MACH_MAINSTONE || PXA_SHARPSL \
|| MACH_ARMCORE || ARCH_PXA_PALM || TRIZEPS_PCMCIA \ || MACH_ARMCORE || ARCH_PXA_PALM || TRIZEPS_PCMCIA \
|| ARCH_VIPER || ARCH_PXA_ESERIES || MACH_STARGATE2) || ARCOM_PCMCIA || ARCH_PXA_ESERIES || MACH_STARGATE2)
select PCMCIA_SOC_COMMON select PCMCIA_SOC_COMMON
help help
Say Y here to include support for the PXA2xx PCMCIA controller Say Y here to include support for the PXA2xx PCMCIA controller
......
drivers/pcmcia/Makefile
View file @ af853e63
...@@ -67,7 +67,7 @@ pxa2xx-obj-$(CONFIG_ARCH_LUBBOCK) += pxa2xx_lubbock_cs.o ...@@ -67,7 +67,7 @@ pxa2xx-obj-$(CONFIG_ARCH_LUBBOCK) += pxa2xx_lubbock_cs.o
pxa2xx-obj-$(CONFIG_MACH_MAINSTONE) += pxa2xx_mainstone.o pxa2xx-obj-$(CONFIG_MACH_MAINSTONE) += pxa2xx_mainstone.o
pxa2xx-obj-$(CONFIG_PXA_SHARPSL) += pxa2xx_sharpsl.o pxa2xx-obj-$(CONFIG_PXA_SHARPSL) += pxa2xx_sharpsl.o
pxa2xx-obj-$(CONFIG_MACH_ARMCORE) += pxa2xx_cm_x2xx_cs.o pxa2xx-obj-$(CONFIG_MACH_ARMCORE) += pxa2xx_cm_x2xx_cs.o
pxa2xx-obj-$(CONFIG_ARCH_VIPER) += pxa2xx_viper.o pxa2xx-obj-$(CONFIG_ARCOM_PCMCIA) += pxa2xx_viper.o
pxa2xx-obj-$(CONFIG_TRIZEPS_PCMCIA) += pxa2xx_trizeps4.o pxa2xx-obj-$(CONFIG_TRIZEPS_PCMCIA) += pxa2xx_trizeps4.o
pxa2xx-obj-$(CONFIG_MACH_PALMTX) += pxa2xx_palmtx.o pxa2xx-obj-$(CONFIG_MACH_PALMTX) += pxa2xx_palmtx.o
pxa2xx-obj-$(CONFIG_MACH_PALMTC) += pxa2xx_palmtc.o pxa2xx-obj-$(CONFIG_MACH_PALMTC) += pxa2xx_palmtc.o
......
drivers/pcmcia/pxa2xx_base.c
View file @ af853e63
...@@ -214,7 +214,8 @@ static void pxa2xx_configure_sockets(struct device *dev) ...@@ -214,7 +214,8 @@ static void pxa2xx_configure_sockets(struct device *dev)
MECR |= MECR_CIT; MECR |= MECR_CIT;
/* Set MECR:NOS (Number Of Sockets) */ /* Set MECR:NOS (Number Of Sockets) */
if ((ops->first + ops->nr) > 1 || machine_is_viper()) if ((ops->first + ops->nr) > 1 ||
machine_is_viper() || machine_is_arcom_zeus())
MECR |= MECR_NOS; MECR |= MECR_NOS;
else else
MECR &= ~MECR_NOS; MECR &= ~MECR_NOS;
...@@ -252,6 +253,7 @@ int pxa2xx_drv_pcmcia_add_one(struct soc_pcmcia_socket *skt) ...@@ -252,6 +253,7 @@ int pxa2xx_drv_pcmcia_add_one(struct soc_pcmcia_socket *skt)
return soc_pcmcia_add_one(skt); return soc_pcmcia_add_one(skt);
} }
EXPORT_SYMBOL(pxa2xx_drv_pcmcia_add_one);
void pxa2xx_drv_pcmcia_ops(struct pcmcia_low_level *ops) void pxa2xx_drv_pcmcia_ops(struct pcmcia_low_level *ops)
{ {
...@@ -261,19 +263,19 @@ void pxa2xx_drv_pcmcia_ops(struct pcmcia_low_level *ops) ...@@ -261,19 +263,19 @@ void pxa2xx_drv_pcmcia_ops(struct pcmcia_low_level *ops)
ops->frequency_change = pxa2xx_pcmcia_frequency_change; ops->frequency_change = pxa2xx_pcmcia_frequency_change;
#endif #endif
} }
EXPORT_SYMBOL(pxa2xx_drv_pcmcia_ops);
int __pxa2xx_drv_pcmcia_probe(struct device *dev) static int pxa2xx_drv_pcmcia_probe(struct platform_device *dev)
{ {
int i, ret = 0; int i, ret = 0;
struct pcmcia_low_level *ops; struct pcmcia_low_level *ops;
struct skt_dev_info *sinfo; struct skt_dev_info *sinfo;
struct soc_pcmcia_socket *skt; struct soc_pcmcia_socket *skt;
if (!dev || !dev->platform_data) ops = (struct pcmcia_low_level *)dev->dev.platform_data;
if (!ops)
return -ENODEV; return -ENODEV;
ops = (struct pcmcia_low_level *)dev->platform_data;
pxa2xx_drv_pcmcia_ops(ops); pxa2xx_drv_pcmcia_ops(ops);
sinfo = kzalloc(SKT_DEV_INFO_SIZE(ops->nr), GFP_KERNEL); sinfo = kzalloc(SKT_DEV_INFO_SIZE(ops->nr), GFP_KERNEL);
...@@ -308,13 +310,6 @@ int __pxa2xx_drv_pcmcia_probe(struct device *dev) ...@@ -308,13 +310,6 @@ int __pxa2xx_drv_pcmcia_probe(struct device *dev)
return ret; return ret;
} }
EXPORT_SYMBOL(__pxa2xx_drv_pcmcia_probe);
static int pxa2xx_drv_pcmcia_probe(struct platform_device *dev)
{
return __pxa2xx_drv_pcmcia_probe(&dev->dev);
}
static int pxa2xx_drv_pcmcia_remove(struct platform_device *dev) static int pxa2xx_drv_pcmcia_remove(struct platform_device *dev)
{ {
......
drivers/pcmcia/pxa2xx_base.h
View file @ af853e63
/* temporary measure */
extern int __pxa2xx_drv_pcmcia_probe(struct device *);
int pxa2xx_drv_pcmcia_add_one(struct soc_pcmcia_socket *skt); int pxa2xx_drv_pcmcia_add_one(struct soc_pcmcia_socket *skt);
void pxa2xx_drv_pcmcia_ops(struct pcmcia_low_level *ops); void pxa2xx_drv_pcmcia_ops(struct pcmcia_low_level *ops);
drivers/pcmcia/pxa2xx_palmtc.c
View file @ af853e63
...@@ -67,7 +67,7 @@ static int palmtc_pcmcia_hw_init(struct soc_pcmcia_socket *skt) ...@@ -67,7 +67,7 @@ static int palmtc_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
if (ret) if (ret)
goto err7; goto err7;
skt->irq = IRQ_GPIO(GPIO_NR_PALMTC_PCMCIA_READY); skt->socket.pci_irq = IRQ_GPIO(GPIO_NR_PALMTC_PCMCIA_READY);
return 0; return 0;
err7: err7:
......
drivers/pcmcia/pxa2xx_stargate2.c
View file @ af853e63
...@@ -40,7 +40,7 @@ static struct pcmcia_irqs irqs[] = { ...@@ -40,7 +40,7 @@ static struct pcmcia_irqs irqs[] = {
static int sg2_pcmcia_hw_init(struct soc_pcmcia_socket *skt) static int sg2_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
{ {
skt->irq = IRQ_GPIO(SG2_S0_GPIO_READY); skt->socket.pci_irq = IRQ_GPIO(SG2_S0_GPIO_READY);
return soc_pcmcia_request_irqs(skt, irqs, ARRAY_SIZE(irqs)); return soc_pcmcia_request_irqs(skt, irqs, ARRAY_SIZE(irqs));
} }
......
drivers/pcmcia/pxa2xx_viper.c
View file @ af853e63
/* /*
* VIPER PCMCIA support * Viper/Zeus PCMCIA support
* Copyright 2004 Arcom Control Systems * Copyright 2004 Arcom Control Systems
* *
* Maintained by Marc Zyngier <maz@misterjones.org> * Maintained by Marc Zyngier <maz@misterjones.org>
* <marc.zyngier@altran.com>
* *
* Based on: * Based on:
* iPAQ h2200 PCMCIA support * iPAQ h2200 PCMCIA support
...@@ -26,37 +25,47 @@ ...@@ -26,37 +25,47 @@
#include <asm/irq.h> #include <asm/irq.h>
#include <mach/viper.h> #include <mach/arcom-pcmcia.h>
#include <asm/mach-types.h>
#include "soc_common.h" #include "soc_common.h"
#include "pxa2xx_base.h" #include "pxa2xx_base.h"
static struct platform_device *arcom_pcmcia_dev;
static struct pcmcia_irqs irqs[] = { static struct pcmcia_irqs irqs[] = {
{ 0, gpio_to_irq(VIPER_CF_CD_GPIO), "PCMCIA_CD" } {
.sock = 0,
.str = "PCMCIA_CD",
},
}; };
static inline struct arcom_pcmcia_pdata *viper_get_pdata(void)
{
return arcom_pcmcia_dev->dev.platform_data;
}
static int viper_pcmcia_hw_init(struct soc_pcmcia_socket *skt) static int viper_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
{ {
struct arcom_pcmcia_pdata *pdata = viper_get_pdata();
unsigned long flags; unsigned long flags;
skt->socket.pci_irq = gpio_to_irq(VIPER_CF_RDY_GPIO); skt->socket.pci_irq = gpio_to_irq(pdata->rdy_gpio);
irqs[0].irq = gpio_to_irq(pdata->cd_gpio);
if (gpio_request(VIPER_CF_CD_GPIO, "CF detect")) if (gpio_request(pdata->cd_gpio, "CF detect"))
goto err_request_cd; goto err_request_cd;
if (gpio_request(VIPER_CF_RDY_GPIO, "CF ready")) if (gpio_request(pdata->rdy_gpio, "CF ready"))
goto err_request_rdy; goto err_request_rdy;
if (gpio_request(VIPER_CF_POWER_GPIO, "CF power")) if (gpio_request(pdata->pwr_gpio, "CF power"))
goto err_request_pwr; goto err_request_pwr;
local_irq_save(flags); local_irq_save(flags);
/* GPIO 82 is the CF power enable line. initially off */ if (gpio_direction_output(pdata->pwr_gpio, 0) ||
if (gpio_direction_output(VIPER_CF_POWER_GPIO, 0) || gpio_direction_input(pdata->cd_gpio) ||
gpio_direction_input(VIPER_CF_CD_GPIO) || gpio_direction_input(pdata->rdy_gpio)) {
gpio_direction_input(VIPER_CF_RDY_GPIO)) {
local_irq_restore(flags); local_irq_restore(flags);
goto err_dir; goto err_dir;
} }
...@@ -66,13 +75,13 @@ static int viper_pcmcia_hw_init(struct soc_pcmcia_socket *skt) ...@@ -66,13 +75,13 @@ static int viper_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
return soc_pcmcia_request_irqs(skt, irqs, ARRAY_SIZE(irqs)); return soc_pcmcia_request_irqs(skt, irqs, ARRAY_SIZE(irqs));
err_dir: err_dir:
gpio_free(VIPER_CF_POWER_GPIO); gpio_free(pdata->pwr_gpio);
err_request_pwr: err_request_pwr:
gpio_free(VIPER_CF_RDY_GPIO); gpio_free(pdata->rdy_gpio);
err_request_rdy: err_request_rdy:
gpio_free(VIPER_CF_CD_GPIO); gpio_free(pdata->cd_gpio);
err_request_cd: err_request_cd:
printk(KERN_ERR "viper: Failed to setup PCMCIA GPIOs\n"); dev_err(&arcom_pcmcia_dev->dev, "Failed to setup PCMCIA GPIOs\n");
return -1; return -1;
} }
...@@ -81,17 +90,21 @@ static int viper_pcmcia_hw_init(struct soc_pcmcia_socket *skt) ...@@ -81,17 +90,21 @@ static int viper_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
*/ */
static void viper_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt) static void viper_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
{ {
struct arcom_pcmcia_pdata *pdata = viper_get_pdata();
soc_pcmcia_free_irqs(skt, irqs, ARRAY_SIZE(irqs)); soc_pcmcia_free_irqs(skt, irqs, ARRAY_SIZE(irqs));
gpio_free(VIPER_CF_POWER_GPIO); gpio_free(pdata->pwr_gpio);
gpio_free(VIPER_CF_RDY_GPIO); gpio_free(pdata->rdy_gpio);
gpio_free(VIPER_CF_CD_GPIO); gpio_free(pdata->cd_gpio);
} }
static void viper_pcmcia_socket_state(struct soc_pcmcia_socket *skt, static void viper_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
struct pcmcia_state *state) struct pcmcia_state *state)
{ {
state->detect = gpio_get_value(VIPER_CF_CD_GPIO) ? 0 : 1; struct arcom_pcmcia_pdata *pdata = viper_get_pdata();
state->ready = gpio_get_value(VIPER_CF_RDY_GPIO) ? 1 : 0;
state->detect = !gpio_get_value(pdata->cd_gpio);
state->ready = !!gpio_get_value(pdata->rdy_gpio);
state->bvd1 = 1; state->bvd1 = 1;
state->bvd2 = 1; state->bvd2 = 1;
state->wrprot = 0; state->wrprot = 0;
...@@ -102,20 +115,21 @@ static void viper_pcmcia_socket_state(struct soc_pcmcia_socket *skt, ...@@ -102,20 +115,21 @@ static void viper_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
static int viper_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, static int viper_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
const socket_state_t *state) const socket_state_t *state)
{ {
struct arcom_pcmcia_pdata *pdata = viper_get_pdata();
/* Silently ignore Vpp, output enable, speaker enable. */ /* Silently ignore Vpp, output enable, speaker enable. */
viper_cf_rst(state->flags & SS_RESET); pdata->reset(state->flags & SS_RESET);
/* Apply socket voltage */ /* Apply socket voltage */
switch (state->Vcc) { switch (state->Vcc) {
case 0: case 0:
gpio_set_value(VIPER_CF_POWER_GPIO, 0); gpio_set_value(pdata->pwr_gpio, 0);
break; break;
case 33: case 33:
gpio_set_value(VIPER_CF_POWER_GPIO, 1); gpio_set_value(pdata->pwr_gpio, 1);
break; break;
default: default:
printk(KERN_ERR "%s: Unsupported Vcc:%d\n", dev_err(&arcom_pcmcia_dev->dev, "Unsupported Vcc:%d\n", state->Vcc);
__func__, state->Vcc);
return -1; return -1;
} }
...@@ -130,7 +144,7 @@ static void viper_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt) ...@@ -130,7 +144,7 @@ static void viper_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt)
{ {
} }
static struct pcmcia_low_level viper_pcmcia_ops __initdata = { static struct pcmcia_low_level viper_pcmcia_ops = {
.owner = THIS_MODULE, .owner = THIS_MODULE,
.hw_init = viper_pcmcia_hw_init, .hw_init = viper_pcmcia_hw_init,
.hw_shutdown = viper_pcmcia_hw_shutdown, .hw_shutdown = viper_pcmcia_hw_shutdown,
...@@ -143,17 +157,25 @@ static struct pcmcia_low_level viper_pcmcia_ops __initdata = { ...@@ -143,17 +157,25 @@ static struct pcmcia_low_level viper_pcmcia_ops __initdata = {
static struct platform_device *viper_pcmcia_device; static struct platform_device *viper_pcmcia_device;
static int __init viper_pcmcia_init(void) static int viper_pcmcia_probe(struct platform_device *pdev)
{ {
int ret; int ret;
if (!machine_is_viper()) /* I can't imagine more than one device, but you never know... */
return -ENODEV; if (arcom_pcmcia_dev)
return -EEXIST;
if (!pdev->dev.platform_data)
return -EINVAL;
viper_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1); viper_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
if (!viper_pcmcia_device) if (!viper_pcmcia_device)
return -ENOMEM; return -ENOMEM;
arcom_pcmcia_dev = pdev;
viper_pcmcia_device->dev.parent = &pdev->dev;
ret = platform_device_add_data(viper_pcmcia_device, ret = platform_device_add_data(viper_pcmcia_device,
&viper_pcmcia_ops, &viper_pcmcia_ops,
sizeof(viper_pcmcia_ops)); sizeof(viper_pcmcia_ops));
...@@ -161,18 +183,49 @@ static int __init viper_pcmcia_init(void) ...@@ -161,18 +183,49 @@ static int __init viper_pcmcia_init(void)
if (!ret) if (!ret)
ret = platform_device_add(viper_pcmcia_device); ret = platform_device_add(viper_pcmcia_device);
if (ret) if (ret) {
platform_device_put(viper_pcmcia_device); platform_device_put(viper_pcmcia_device);
arcom_pcmcia_dev = NULL;
}
return ret; return ret;
} }
static void __exit viper_pcmcia_exit(void) static int viper_pcmcia_remove(struct platform_device *pdev)
{ {
platform_device_unregister(viper_pcmcia_device); platform_device_unregister(viper_pcmcia_device);
arcom_pcmcia_dev = NULL;
return 0;
}
static struct platform_device_id viper_pcmcia_id_table[] = {
{ .name = "viper-pcmcia", },
{ .name = "zeus-pcmcia", },
{ },
};
static struct platform_driver viper_pcmcia_driver = {
.probe = viper_pcmcia_probe,
.remove = viper_pcmcia_remove,
.driver = {
.name = "arcom-pcmcia",
.owner = THIS_MODULE,
},
.id_table = viper_pcmcia_id_table,
};
static int __init viper_pcmcia_init(void)
{
return platform_driver_register(&viper_pcmcia_driver);
}
static void __exit viper_pcmcia_exit(void)
{
return platform_driver_unregister(&viper_pcmcia_driver);
} }
module_init(viper_pcmcia_init); module_init(viper_pcmcia_init);
module_exit(viper_pcmcia_exit); module_exit(viper_pcmcia_exit);
MODULE_DEVICE_TABLE(platform, viper_pcmcia_id_table);
MODULE_LICENSE("GPL"); MODULE_LICENSE("GPL");
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7