Commit afaa7c54 authored by Chris Zankel's avatar Chris Zankel

Merge tag 'xtensa-for-next-20151109' of git://github.com/jcmvbkbc/linux-xtensa

Xtensa improvements for 4.4:

- fix remaining issues with noMMU cores;
- fix build for cores w/o cache or zero overhead loop options;
- fix boot of secondary cores in SMP configuration;
- add support for DMA to high memory pages;
- add dma_to_phys and phys_to_dma functions.
parents 6a13feb9 4c3dab39
...@@ -17,6 +17,7 @@ config XTENSA ...@@ -17,6 +17,7 @@ config XTENSA
select HAVE_DMA_API_DEBUG select HAVE_DMA_API_DEBUG
select HAVE_DMA_ATTRS select HAVE_DMA_ATTRS
select HAVE_FUNCTION_TRACER select HAVE_FUNCTION_TRACER
select HAVE_FUTEX_CMPXCHG if !MMU
select HAVE_IRQ_TIME_ACCOUNTING select HAVE_IRQ_TIME_ACCOUNTING
select HAVE_OPROFILE select HAVE_OPROFILE
select HAVE_PERF_EVENTS select HAVE_PERF_EVENTS
...@@ -397,6 +398,20 @@ config SIMDISK1_FILENAME ...@@ -397,6 +398,20 @@ config SIMDISK1_FILENAME
source "mm/Kconfig" source "mm/Kconfig"
config FORCE_MAX_ZONEORDER
int "Maximum zone order"
default "11"
help
The kernel memory allocator divides physically contiguous memory
blocks into "zones", where each zone is a power of two number of
pages. This option selects the largest power of two that the kernel
keeps in the memory allocator. If you need to allocate very large
blocks of physically contiguous memory, then you may need to
increase this value.
This config option is actually maximum order plus one. For example,
a value of 11 means that the largest free memory block is 2^10 pages.
source "drivers/pcmcia/Kconfig" source "drivers/pcmcia/Kconfig"
source "drivers/pci/hotplug/Kconfig" source "drivers/pci/hotplug/Kconfig"
...@@ -408,7 +423,7 @@ config DEFAULT_MEM_START ...@@ -408,7 +423,7 @@ config DEFAULT_MEM_START
hex "Physical address of the default memory area start" hex "Physical address of the default memory area start"
depends on PLATFORM_WANT_DEFAULT_MEM depends on PLATFORM_WANT_DEFAULT_MEM
default 0x00000000 if MMU default 0x00000000 if MMU
default 0x40000000 if !MMU default 0x60000000 if !MMU
help help
This is a fallback start address of the default memory area, it is This is a fallback start address of the default memory area, it is
used when no physical memory size is passed through DTB or through used when no physical memory size is passed through DTB or through
......
...@@ -40,17 +40,4 @@ SECTIONS ...@@ -40,17 +40,4 @@ SECTIONS
*(.bss) *(.bss)
__bss_end = .; __bss_end = .;
} }
#ifdef CONFIG_MMU
/*
* This is a remapped copy of the Reset Vector Code.
* It keeps gdb in sync with the PC after switching
* to the temporary mapping used while setting up
* the V2 MMU mappings for Linux.
*/
.ResetVector.remapped_text 0x46000000 (INFO):
{
*(.ResetVector.remapped_text)
}
#endif
} }
...@@ -58,8 +58,6 @@ _SetupMMU: ...@@ -58,8 +58,6 @@ _SetupMMU:
wsr a0, ps wsr a0, ps
rsync rsync
Offset = _SetupMMU - _ResetVector
#ifndef CONFIG_INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX #ifndef CONFIG_INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX
initialize_mmu initialize_mmu
#endif #endif
...@@ -74,29 +72,3 @@ reset: ...@@ -74,29 +72,3 @@ reset:
movi a3, 0 movi a3, 0
movi a4, 0 movi a4, 0
jx a0 jx a0
#ifdef CONFIG_MMU
.align 4
.section .ResetVector.remapped_text, "x"
.global _RemappedResetVector
/* Do org before literals */
.org 0
_RemappedResetVector:
.begin no-absolute-literals
.literal_position
_j _RemappedSetupMMU
/* Position Remapped code at the same location as the original code */
. = _RemappedResetVector + Offset
_RemappedSetupMMU:
#ifndef CONFIG_INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX
initialize_mmu
#endif
.end no-absolute-literals
#endif
/dts-v1/;
/include/ "xtfpga.dtsi"
/include/ "xtfpga-flash-128m.dtsi"
/ {
compatible = "cdns,xtensa-kc705";
chosen {
bootargs = "earlycon=uart8250,mmio32,0x9d050020,115200n8 console=ttyS0,115200n8 ip=dhcp root=/dev/nfs rw debug";
};
memory@0 {
device_type = "memory";
reg = <0x60000000 0x10000000>;
};
soc {
ranges = <0x00000000 0x90000000 0x10000000>;
};
};
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_FHANDLE=y
CONFIG_IRQ_DOMAIN_DEBUG=y
CONFIG_NO_HZ_IDLE=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_IRQ_TIME_ACCOUNTING=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_CGROUP_DEBUG=y
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CPUSETS=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_MEMCG=y
CONFIG_NAMESPACES=y
CONFIG_SCHED_AUTOGROUP=y
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
# CONFIG_RD_XZ is not set
# CONFIG_RD_LZO is not set
# CONFIG_RD_LZ4 is not set
CONFIG_EXPERT=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS_ALL=y
CONFIG_PERF_EVENTS=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_XTENSA_VARIANT_CUSTOM=y
CONFIG_XTENSA_VARIANT_CUSTOM_NAME="de212"
# CONFIG_XTENSA_VARIANT_MMU is not set
CONFIG_XTENSA_UNALIGNED_USER=y
CONFIG_PREEMPT=y
# CONFIG_PCI is not set
CONFIG_XTENSA_PLATFORM_XTFPGA=y
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="earlycon=uart8250,mmio32,0x9d050020,115200n8 console=ttyS0,115200n8 ip=dhcp root=/dev/nfs rw debug"
CONFIG_USE_OF=y
CONFIG_BUILTIN_DTB="kc705_nommu"
CONFIG_DEFAULT_MEM_SIZE=0x10000000
CONFIG_BINFMT_FLAT=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
# CONFIG_IPV6 is not set
CONFIG_NETFILTER=y
# CONFIG_WIRELESS is not set
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
# CONFIG_STANDALONE is not set
CONFIG_MTD=y
CONFIG_MTD_CFI=y
CONFIG_MTD_JEDECPROBE=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_CFI_STAA=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_NETDEVICES=y
# CONFIG_NET_VENDOR_ARC is not set
# CONFIG_NET_VENDOR_BROADCOM is not set
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MICREL is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
CONFIG_MARVELL_PHY=y
# CONFIG_WLAN is not set
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_OF_PLATFORM=y
CONFIG_HW_RANDOM=y
# CONFIG_HWMON is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y
CONFIG_SOFT_WATCHDOG=y
# CONFIG_VGA_CONSOLE is not set
# CONFIG_USB_SUPPORT is not set
CONFIG_EXT3_FS=y
CONFIG_EXT4_FS=y
CONFIG_FANOTIFY=y
CONFIG_VFAT_FS=y
CONFIG_JFFS2_FS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V4=y
CONFIG_NFS_SWAP=y
CONFIG_ROOT_NFS=y
CONFIG_SUNRPC_DEBUG=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
CONFIG_PRINTK_TIME=y
CONFIG_DYNAMIC_DEBUG=y
CONFIG_DEBUG_INFO=y
# CONFIG_FRAME_POINTER is not set
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_VM=y
CONFIG_DEBUG_NOMMU_REGIONS=y
CONFIG_DEBUG_SHIRQ=y
CONFIG_LOCKUP_DETECTOR=y
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_ATOMIC_SLEEP=y
CONFIG_STACKTRACE=y
# CONFIG_RCU_CPU_STALL_INFO is not set
CONFIG_RCU_TRACE=y
# CONFIG_FTRACE is not set
# CONFIG_LD_NO_RELAX is not set
# CONFIG_CRYPTO_ECHAINIV is not set
CONFIG_CRYPTO_ANSI_CPRNG=y
...@@ -35,9 +35,10 @@ ...@@ -35,9 +35,10 @@
* __loop as * __loop as
* restart loop. 'as' register must not have been modified! * restart loop. 'as' register must not have been modified!
* *
* __endla ar, at, incr * __endla ar, as, incr
* ar start address (modified) * ar start address (modified)
* as scratch register used by macro * as scratch register used by __loops/__loopi macros or
* end address used by __loopt macro
* inc increment * inc increment
*/ */
...@@ -97,7 +98,7 @@ ...@@ -97,7 +98,7 @@
.endm .endm
/* /*
* loop from ar to ax * loop from ar to as
*/ */
.macro __loopt ar, as, at, incr_log2 .macro __loopt ar, as, at, incr_log2
......
...@@ -73,7 +73,9 @@ ...@@ -73,7 +73,9 @@
.macro ___unlock_dcache_all ar at .macro ___unlock_dcache_all ar at
#if XCHAL_DCACHE_SIZE
__loop_cache_all \ar \at diu XCHAL_DCACHE_SIZE XCHAL_DCACHE_LINEWIDTH __loop_cache_all \ar \at diu XCHAL_DCACHE_SIZE XCHAL_DCACHE_LINEWIDTH
#endif
.endm .endm
...@@ -90,30 +92,38 @@ ...@@ -90,30 +92,38 @@
.macro ___flush_invalidate_dcache_all ar at .macro ___flush_invalidate_dcache_all ar at
#if XCHAL_DCACHE_SIZE
__loop_cache_all \ar \at diwbi XCHAL_DCACHE_SIZE XCHAL_DCACHE_LINEWIDTH __loop_cache_all \ar \at diwbi XCHAL_DCACHE_SIZE XCHAL_DCACHE_LINEWIDTH
#endif
.endm .endm
.macro ___flush_dcache_all ar at .macro ___flush_dcache_all ar at
#if XCHAL_DCACHE_SIZE
__loop_cache_all \ar \at diwb XCHAL_DCACHE_SIZE XCHAL_DCACHE_LINEWIDTH __loop_cache_all \ar \at diwb XCHAL_DCACHE_SIZE XCHAL_DCACHE_LINEWIDTH
#endif
.endm .endm
.macro ___invalidate_dcache_all ar at .macro ___invalidate_dcache_all ar at
#if XCHAL_DCACHE_SIZE
__loop_cache_all \ar \at dii __stringify(DCACHE_WAY_SIZE) \ __loop_cache_all \ar \at dii __stringify(DCACHE_WAY_SIZE) \
XCHAL_DCACHE_LINEWIDTH XCHAL_DCACHE_LINEWIDTH
#endif
.endm .endm
.macro ___invalidate_icache_all ar at .macro ___invalidate_icache_all ar at
#if XCHAL_ICACHE_SIZE
__loop_cache_all \ar \at iii __stringify(ICACHE_WAY_SIZE) \ __loop_cache_all \ar \at iii __stringify(ICACHE_WAY_SIZE) \
XCHAL_ICACHE_LINEWIDTH XCHAL_ICACHE_LINEWIDTH
#endif
.endm .endm
...@@ -121,28 +131,36 @@ ...@@ -121,28 +131,36 @@
.macro ___flush_invalidate_dcache_range ar as at .macro ___flush_invalidate_dcache_range ar as at
#if XCHAL_DCACHE_SIZE
__loop_cache_range \ar \as \at dhwbi XCHAL_DCACHE_LINEWIDTH __loop_cache_range \ar \as \at dhwbi XCHAL_DCACHE_LINEWIDTH
#endif
.endm .endm
.macro ___flush_dcache_range ar as at .macro ___flush_dcache_range ar as at
#if XCHAL_DCACHE_SIZE
__loop_cache_range \ar \as \at dhwb XCHAL_DCACHE_LINEWIDTH __loop_cache_range \ar \as \at dhwb XCHAL_DCACHE_LINEWIDTH
#endif
.endm .endm
.macro ___invalidate_dcache_range ar as at .macro ___invalidate_dcache_range ar as at
#if XCHAL_DCACHE_SIZE
__loop_cache_range \ar \as \at dhi XCHAL_DCACHE_LINEWIDTH __loop_cache_range \ar \as \at dhi XCHAL_DCACHE_LINEWIDTH
#endif
.endm .endm
.macro ___invalidate_icache_range ar as at .macro ___invalidate_icache_range ar as at
#if XCHAL_ICACHE_SIZE
__loop_cache_range \ar \as \at ihi XCHAL_ICACHE_LINEWIDTH __loop_cache_range \ar \as \at ihi XCHAL_ICACHE_LINEWIDTH
#endif
.endm .endm
...@@ -150,27 +168,35 @@ ...@@ -150,27 +168,35 @@
.macro ___flush_invalidate_dcache_page ar as .macro ___flush_invalidate_dcache_page ar as
#if XCHAL_DCACHE_SIZE
__loop_cache_page \ar \as dhwbi XCHAL_DCACHE_LINEWIDTH __loop_cache_page \ar \as dhwbi XCHAL_DCACHE_LINEWIDTH
#endif
.endm .endm
.macro ___flush_dcache_page ar as .macro ___flush_dcache_page ar as
#if XCHAL_DCACHE_SIZE
__loop_cache_page \ar \as dhwb XCHAL_DCACHE_LINEWIDTH __loop_cache_page \ar \as dhwb XCHAL_DCACHE_LINEWIDTH
#endif
.endm .endm
.macro ___invalidate_dcache_page ar as .macro ___invalidate_dcache_page ar as
#if XCHAL_DCACHE_SIZE
__loop_cache_page \ar \as dhi XCHAL_DCACHE_LINEWIDTH __loop_cache_page \ar \as dhi XCHAL_DCACHE_LINEWIDTH
#endif
.endm .endm
.macro ___invalidate_icache_page ar as .macro ___invalidate_icache_page ar as
#if XCHAL_ICACHE_SIZE
__loop_cache_page \ar \as ihi XCHAL_ICACHE_LINEWIDTH __loop_cache_page \ar \as ihi XCHAL_ICACHE_LINEWIDTH
#endif
.endm .endm
...@@ -55,9 +55,14 @@ extern void __flush_dcache_range(unsigned long, unsigned long); ...@@ -55,9 +55,14 @@ extern void __flush_dcache_range(unsigned long, unsigned long);
extern void __flush_invalidate_dcache_page(unsigned long); extern void __flush_invalidate_dcache_page(unsigned long);
extern void __flush_invalidate_dcache_range(unsigned long, unsigned long); extern void __flush_invalidate_dcache_range(unsigned long, unsigned long);
#else #else
# define __flush_dcache_range(p,s) do { } while(0) static inline void __flush_dcache_page(unsigned long va)
# define __flush_dcache_page(p) do { } while(0) {
# define __flush_invalidate_dcache_page(p) __invalidate_dcache_page(p) }
static inline void __flush_dcache_range(unsigned long va, unsigned long sz)
{
}
# define __flush_invalidate_dcache_all() __invalidate_dcache_all()
# define __flush_invalidate_dcache_page(p) __invalidate_dcache_page(p)
# define __flush_invalidate_dcache_range(p,s) __invalidate_dcache_range(p,s) # define __flush_invalidate_dcache_range(p,s) __invalidate_dcache_range(p,s)
#endif #endif
...@@ -174,99 +179,4 @@ extern void copy_from_user_page(struct vm_area_struct*, struct page*, ...@@ -174,99 +179,4 @@ extern void copy_from_user_page(struct vm_area_struct*, struct page*,
#endif #endif
#define XTENSA_CACHEBLK_LOG2 29
#define XTENSA_CACHEBLK_SIZE (1 << XTENSA_CACHEBLK_LOG2)
#define XTENSA_CACHEBLK_MASK (7 << XTENSA_CACHEBLK_LOG2)
#if XCHAL_HAVE_CACHEATTR
static inline u32 xtensa_get_cacheattr(void)
{
u32 r;
asm volatile(" rsr %0, cacheattr" : "=a"(r));
return r;
}
static inline u32 xtensa_get_dtlb1(u32 addr)
{
u32 r = addr & XTENSA_CACHEBLK_MASK;
return r | ((xtensa_get_cacheattr() >> (r >> (XTENSA_CACHEBLK_LOG2-2)))
& 0xF);
}
#else
static inline u32 xtensa_get_dtlb1(u32 addr)
{
u32 r;
asm volatile(" rdtlb1 %0, %1" : "=a"(r) : "a"(addr));
asm volatile(" dsync");
return r;
}
static inline u32 xtensa_get_cacheattr(void)
{
u32 r = 0;
u32 a = 0;
do {
a -= XTENSA_CACHEBLK_SIZE;
r = (r << 4) | (xtensa_get_dtlb1(a) & 0xF);
} while (a);
return r;
}
#endif
static inline int xtensa_need_flush_dma_source(u32 addr)
{
return (xtensa_get_dtlb1(addr) & ((1 << XCHAL_CA_BITS) - 1)) >= 4;
}
static inline int xtensa_need_invalidate_dma_destination(u32 addr)
{
return (xtensa_get_dtlb1(addr) & ((1 << XCHAL_CA_BITS) - 1)) != 2;
}
static inline void flush_dcache_unaligned(u32 addr, u32 size)
{
u32 cnt;
if (size) {
cnt = (size + ((XCHAL_DCACHE_LINESIZE - 1) & addr)
+ XCHAL_DCACHE_LINESIZE - 1) / XCHAL_DCACHE_LINESIZE;
while (cnt--) {
asm volatile(" dhwb %0, 0" : : "a"(addr));
addr += XCHAL_DCACHE_LINESIZE;
}
asm volatile(" dsync");
}
}
static inline void invalidate_dcache_unaligned(u32 addr, u32 size)
{
int cnt;
if (size) {
asm volatile(" dhwbi %0, 0 ;" : : "a"(addr));
cnt = (size + ((XCHAL_DCACHE_LINESIZE - 1) & addr)
- XCHAL_DCACHE_LINESIZE - 1) / XCHAL_DCACHE_LINESIZE;
while (cnt-- > 0) {
asm volatile(" dhi %0, %1" : : "a"(addr),
"n"(XCHAL_DCACHE_LINESIZE));
addr += XCHAL_DCACHE_LINESIZE;
}
asm volatile(" dhwbi %0, %1" : : "a"(addr),
"n"(XCHAL_DCACHE_LINESIZE));
asm volatile(" dsync");
}
}
static inline void flush_invalidate_dcache_unaligned(u32 addr, u32 size)
{
u32 cnt;
if (size) {
cnt = (size + ((XCHAL_DCACHE_LINESIZE - 1) & addr)
+ XCHAL_DCACHE_LINESIZE - 1) / XCHAL_DCACHE_LINESIZE;
while (cnt--) {
asm volatile(" dhwbi %0, 0" : : "a"(addr));
addr += XCHAL_DCACHE_LINESIZE;
}
asm volatile(" dsync");
}
}
#endif /* _XTENSA_CACHEFLUSH_H */ #endif /* _XTENSA_CACHEFLUSH_H */
...@@ -35,4 +35,14 @@ static inline struct dma_map_ops *get_dma_ops(struct device *dev) ...@@ -35,4 +35,14 @@ static inline struct dma_map_ops *get_dma_ops(struct device *dev)
void dma_cache_sync(struct device *dev, void *vaddr, size_t size, void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
enum dma_data_direction direction); enum dma_data_direction direction);
static inline dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr)
{
return (dma_addr_t)paddr;
}
static inline phys_addr_t dma_to_phys(struct device *dev, dma_addr_t daddr)
{
return (phys_addr_t)daddr;
}
#endif /* _XTENSA_DMA_MAPPING_H */ #endif /* _XTENSA_DMA_MAPPING_H */
...@@ -161,7 +161,8 @@ ...@@ -161,7 +161,8 @@
#endif /* defined(CONFIG_MMU) && XCHAL_HAVE_PTP_MMU && #endif /* defined(CONFIG_MMU) && XCHAL_HAVE_PTP_MMU &&
XCHAL_HAVE_SPANNING_WAY */ XCHAL_HAVE_SPANNING_WAY */
#if !defined(CONFIG_MMU) && XCHAL_HAVE_TLBS #if !defined(CONFIG_MMU) && XCHAL_HAVE_TLBS && \
(XCHAL_DCACHE_SIZE || XCHAL_ICACHE_SIZE)
/* Enable data and instruction cache in the DEFAULT_MEMORY region /* Enable data and instruction cache in the DEFAULT_MEMORY region
* if the processor has DTLB and ITLB. * if the processor has DTLB and ITLB.
*/ */
...@@ -175,14 +176,18 @@ ...@@ -175,14 +176,18 @@
1: 1:
sub a9, a9, a8 sub a9, a9, a8
2: 2:
#if XCHAL_DCACHE_SIZE
rdtlb1 a3, a5 rdtlb1 a3, a5
ritlb1 a4, a5
and a3, a3, a6 and a3, a3, a6
and a4, a4, a6
or a3, a3, a7 or a3, a3, a7
or a4, a4, a7
wdtlb a3, a5 wdtlb a3, a5
#endif
#if XCHAL_ICACHE_SIZE
ritlb1 a4, a5
and a4, a4, a6
or a4, a4, a7
witlb a4, a5 witlb a4, a5
#endif
add a5, a5, a8 add a5, a5, a8
bltu a8, a9, 1b bltu a8, a9, 1b
......
...@@ -25,15 +25,6 @@ ...@@ -25,15 +25,6 @@
#ifdef CONFIG_MMU #ifdef CONFIG_MMU
#if XCHAL_HAVE_PTP_MMU && XCHAL_HAVE_SPANNING_WAY && defined(CONFIG_OF)
extern unsigned long xtensa_kio_paddr;
static inline unsigned long xtensa_get_kio_paddr(void)
{
return xtensa_kio_paddr;
}
#endif
/* /*
* Return the virtual address for the specified bus memory. * Return the virtual address for the specified bus memory.
* Note that we currently don't support any address outside the KIO segment. * Note that we currently don't support any address outside the KIO segment.
......
...@@ -18,7 +18,11 @@ ...@@ -18,7 +18,11 @@
* We only use two ring levels, user and kernel space. * We only use two ring levels, user and kernel space.
*/ */
#ifdef CONFIG_MMU
#define USER_RING 1 /* user ring level */ #define USER_RING 1 /* user ring level */
#else
#define USER_RING 0
#endif
#define KERNEL_RING 0 /* kernel ring level */ #define KERNEL_RING 0 /* kernel ring level */
/* /*
......
...@@ -21,13 +21,26 @@ ...@@ -21,13 +21,26 @@
#include <variant/core.h> #include <variant/core.h>
#include <platform/hardware.h> #include <platform/hardware.h>
#if XCHAL_HAVE_PTP_MMU
#define XCHAL_KIO_CACHED_VADDR 0xe0000000 #define XCHAL_KIO_CACHED_VADDR 0xe0000000
#define XCHAL_KIO_BYPASS_VADDR 0xf0000000 #define XCHAL_KIO_BYPASS_VADDR 0xf0000000
#define XCHAL_KIO_DEFAULT_PADDR 0xf0000000 #define XCHAL_KIO_DEFAULT_PADDR 0xf0000000
#else
#define XCHAL_KIO_BYPASS_VADDR XCHAL_KIO_PADDR
#define XCHAL_KIO_DEFAULT_PADDR 0x90000000
#endif
#define XCHAL_KIO_SIZE 0x10000000 #define XCHAL_KIO_SIZE 0x10000000
#if XCHAL_HAVE_PTP_MMU && XCHAL_HAVE_SPANNING_WAY && defined(CONFIG_OF) #if (!XCHAL_HAVE_PTP_MMU || XCHAL_HAVE_SPANNING_WAY) && defined(CONFIG_OF)
#define XCHAL_KIO_PADDR xtensa_get_kio_paddr() #define XCHAL_KIO_PADDR xtensa_get_kio_paddr()
#ifndef __ASSEMBLY__
extern unsigned long xtensa_kio_paddr;
static inline unsigned long xtensa_get_kio_paddr(void)
{
return xtensa_kio_paddr;
}
#endif
#else #else
#define XCHAL_KIO_PADDR XCHAL_KIO_DEFAULT_PADDR #define XCHAL_KIO_PADDR XCHAL_KIO_DEFAULT_PADDR
#endif #endif
...@@ -48,6 +61,9 @@ ...@@ -48,6 +61,9 @@
#define LOAD_MEMORY_ADDRESS 0xD0003000 #define LOAD_MEMORY_ADDRESS 0xD0003000
#endif #endif
#define RESET_VECTOR1_VADDR (VIRTUAL_MEMORY_ADDRESS + \
XCHAL_RESET_VECTOR1_PADDR)
#else /* !defined(CONFIG_MMU) */ #else /* !defined(CONFIG_MMU) */
/* MMU Not being used - Virtual == Physical */ /* MMU Not being used - Virtual == Physical */
...@@ -60,6 +76,8 @@ ...@@ -60,6 +76,8 @@
/* Loaded just above possibly live vectors */ /* Loaded just above possibly live vectors */
#define LOAD_MEMORY_ADDRESS (PLATFORM_DEFAULT_MEM_START + 0x3000) #define LOAD_MEMORY_ADDRESS (PLATFORM_DEFAULT_MEM_START + 0x3000)
#define RESET_VECTOR1_VADDR (XCHAL_RESET_VECTOR1_VADDR)
#endif /* CONFIG_MMU */ #endif /* CONFIG_MMU */
#define XC_VADDR(offset) (VIRTUAL_MEMORY_ADDRESS + offset) #define XC_VADDR(offset) (VIRTUAL_MEMORY_ADDRESS + offset)
...@@ -67,14 +85,6 @@ ...@@ -67,14 +85,6 @@
/* Used to set VECBASE register */ /* Used to set VECBASE register */
#define VECBASE_RESET_VADDR VIRTUAL_MEMORY_ADDRESS #define VECBASE_RESET_VADDR VIRTUAL_MEMORY_ADDRESS
#define RESET_VECTOR_VECOFS (XCHAL_RESET_VECTOR_VADDR - \
VECBASE_RESET_VADDR)
#define RESET_VECTOR_VADDR XC_VADDR(RESET_VECTOR_VECOFS)
#define RESET_VECTOR1_VECOFS (XCHAL_RESET_VECTOR1_VADDR - \
VECBASE_RESET_VADDR)
#define RESET_VECTOR1_VADDR XC_VADDR(RESET_VECTOR1_VECOFS)
#if defined(XCHAL_HAVE_VECBASE) && XCHAL_HAVE_VECBASE #if defined(XCHAL_HAVE_VECBASE) && XCHAL_HAVE_VECBASE
#define USER_VECTOR_VADDR XC_VADDR(XCHAL_USER_VECOFS) #define USER_VECTOR_VADDR XC_VADDR(XCHAL_USER_VECOFS)
......
...@@ -16,6 +16,7 @@ obj-$(CONFIG_SMP) += smp.o mxhead.o ...@@ -16,6 +16,7 @@ obj-$(CONFIG_SMP) += smp.o mxhead.o
obj-$(CONFIG_XTENSA_VARIANT_HAVE_PERF_EVENTS) += perf_event.o obj-$(CONFIG_XTENSA_VARIANT_HAVE_PERF_EVENTS) += perf_event.o
AFLAGS_head.o += -mtext-section-literals AFLAGS_head.o += -mtext-section-literals
AFLAGS_mxhead.o += -mtext-section-literals
# In the Xtensa architecture, assembly generates literals which must always # In the Xtensa architecture, assembly generates literals which must always
# precede the L32R instruction with a relative offset less than 256 kB. # precede the L32R instruction with a relative offset less than 256 kB.
......
...@@ -367,8 +367,10 @@ common_exception: ...@@ -367,8 +367,10 @@ common_exception:
s32i a2, a1, PT_SYSCALL s32i a2, a1, PT_SYSCALL
movi a2, 0 movi a2, 0
s32i a3, a1, PT_EXCVADDR s32i a3, a1, PT_EXCVADDR
#if XCHAL_HAVE_LOOPS
xsr a2, lcount xsr a2, lcount
s32i a2, a1, PT_LCOUNT s32i a2, a1, PT_LCOUNT
#endif
/* It is now save to restore the EXC_TABLE_FIXUP variable. */ /* It is now save to restore the EXC_TABLE_FIXUP variable. */
...@@ -429,11 +431,12 @@ common_exception: ...@@ -429,11 +431,12 @@ common_exception:
rsync # PS.WOE => rsync => overflow rsync # PS.WOE => rsync => overflow
/* Save lbeg, lend */ /* Save lbeg, lend */
#if XCHAL_HAVE_LOOPS
rsr a4, lbeg rsr a4, lbeg
rsr a3, lend rsr a3, lend
s32i a4, a1, PT_LBEG s32i a4, a1, PT_LBEG
s32i a3, a1, PT_LEND s32i a3, a1, PT_LEND
#endif
/* Save SCOMPARE1 */ /* Save SCOMPARE1 */
...@@ -724,13 +727,14 @@ common_exception_exit: ...@@ -724,13 +727,14 @@ common_exception_exit:
wsr a3, sar wsr a3, sar
/* Restore LBEG, LEND, LCOUNT */ /* Restore LBEG, LEND, LCOUNT */
#if XCHAL_HAVE_LOOPS
l32i a2, a1, PT_LBEG l32i a2, a1, PT_LBEG
l32i a3, a1, PT_LEND l32i a3, a1, PT_LEND
wsr a2, lbeg wsr a2, lbeg
l32i a2, a1, PT_LCOUNT l32i a2, a1, PT_LCOUNT
wsr a3, lend wsr a3, lend
wsr a2, lcount wsr a2, lcount
#endif
/* We control single stepping through the ICOUNTLEVEL register. */ /* We control single stepping through the ICOUNTLEVEL register. */
......
...@@ -249,7 +249,7 @@ ENTRY(_startup) ...@@ -249,7 +249,7 @@ ENTRY(_startup)
__loopt a2, a3, a4, 2 __loopt a2, a3, a4, 2
s32i a0, a2, 0 s32i a0, a2, 0
__endla a2, a4, 4 __endla a2, a3, 4
#if XCHAL_DCACHE_IS_WRITEBACK #if XCHAL_DCACHE_IS_WRITEBACK
......
...@@ -48,8 +48,6 @@ _SetupOCD: ...@@ -48,8 +48,6 @@ _SetupOCD:
rsync rsync
_SetupMMU: _SetupMMU:
Offset = _SetupMMU - _SecondaryResetVector
#ifdef CONFIG_INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX #ifdef CONFIG_INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX
initialize_mmu initialize_mmu
#endif #endif
...@@ -62,24 +60,3 @@ _SetupMMU: ...@@ -62,24 +60,3 @@ _SetupMMU:
jx a3 jx a3
.end no-absolute-literals .end no-absolute-literals
.section .SecondaryResetVector.remapped_text, "ax"
.global _RemappedSecondaryResetVector
.org 0 # Need to do org before literals
_RemappedSecondaryResetVector:
.begin no-absolute-literals
.literal_position
_j _RemappedSetupMMU
. = _RemappedSecondaryResetVector + Offset
_RemappedSetupMMU:
#ifdef CONFIG_INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX
initialize_mmu
#endif
.end no-absolute-literals
...@@ -15,14 +15,15 @@ ...@@ -15,14 +15,15 @@
* Joe Taylor <joe@tensilica.com, joetylr@yahoo.com> * Joe Taylor <joe@tensilica.com, joetylr@yahoo.com>
*/ */
#include <linux/types.h>
#include <linux/mm.h>
#include <linux/string.h>
#include <linux/pci.h>
#include <linux/gfp.h> #include <linux/gfp.h>
#include <linux/highmem.h>
#include <linux/mm.h>
#include <linux/module.h> #include <linux/module.h>
#include <asm/io.h> #include <linux/pci.h>
#include <linux/string.h>
#include <linux/types.h>
#include <asm/cacheflush.h> #include <asm/cacheflush.h>
#include <asm/io.h>
void dma_cache_sync(struct device *dev, void *vaddr, size_t size, void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
enum dma_data_direction dir) enum dma_data_direction dir)
...@@ -47,17 +48,36 @@ void dma_cache_sync(struct device *dev, void *vaddr, size_t size, ...@@ -47,17 +48,36 @@ void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
} }
EXPORT_SYMBOL(dma_cache_sync); EXPORT_SYMBOL(dma_cache_sync);
static void do_cache_op(dma_addr_t dma_handle, size_t size,
void (*fn)(unsigned long, unsigned long))
{
unsigned long off = dma_handle & (PAGE_SIZE - 1);
unsigned long pfn = PFN_DOWN(dma_handle);
struct page *page = pfn_to_page(pfn);
if (!PageHighMem(page))
fn((unsigned long)bus_to_virt(dma_handle), size);
else
while (size > 0) {
size_t sz = min_t(size_t, size, PAGE_SIZE - off);
void *vaddr = kmap_atomic(page);
fn((unsigned long)vaddr + off, sz);
kunmap_atomic(vaddr);
off = 0;
++page;
size -= sz;
}
}
static void xtensa_sync_single_for_cpu(struct device *dev, static void xtensa_sync_single_for_cpu(struct device *dev,
dma_addr_t dma_handle, size_t size, dma_addr_t dma_handle, size_t size,
enum dma_data_direction dir) enum dma_data_direction dir)
{ {
void *vaddr;
switch (dir) { switch (dir) {
case DMA_BIDIRECTIONAL: case DMA_BIDIRECTIONAL:
case DMA_FROM_DEVICE: case DMA_FROM_DEVICE:
vaddr = bus_to_virt(dma_handle); do_cache_op(dma_handle, size, __invalidate_dcache_range);
__invalidate_dcache_range((unsigned long)vaddr, size);
break; break;
case DMA_NONE: case DMA_NONE:
...@@ -73,13 +93,11 @@ static void xtensa_sync_single_for_device(struct device *dev, ...@@ -73,13 +93,11 @@ static void xtensa_sync_single_for_device(struct device *dev,
dma_addr_t dma_handle, size_t size, dma_addr_t dma_handle, size_t size,
enum dma_data_direction dir) enum dma_data_direction dir)
{ {
void *vaddr;
switch (dir) { switch (dir) {
case DMA_BIDIRECTIONAL: case DMA_BIDIRECTIONAL:
case DMA_TO_DEVICE: case DMA_TO_DEVICE:
vaddr = bus_to_virt(dma_handle); if (XCHAL_DCACHE_IS_WRITEBACK)
__flush_dcache_range((unsigned long)vaddr, size); do_cache_op(dma_handle, size, __flush_dcache_range);
break; break;
case DMA_NONE: case DMA_NONE:
...@@ -171,7 +189,6 @@ static dma_addr_t xtensa_map_page(struct device *dev, struct page *page, ...@@ -171,7 +189,6 @@ static dma_addr_t xtensa_map_page(struct device *dev, struct page *page,
{ {
dma_addr_t dma_handle = page_to_phys(page) + offset; dma_addr_t dma_handle = page_to_phys(page) + offset;
BUG_ON(PageHighMem(page));
xtensa_sync_single_for_device(dev, dma_handle, size, dir); xtensa_sync_single_for_device(dev, dma_handle, size, dir);
return dma_handle; return dma_handle;
} }
......
...@@ -190,7 +190,7 @@ static int __init parse_bootparam(const bp_tag_t* tag) ...@@ -190,7 +190,7 @@ static int __init parse_bootparam(const bp_tag_t* tag)
#ifdef CONFIG_OF #ifdef CONFIG_OF
bool __initdata dt_memory_scan = false; bool __initdata dt_memory_scan = false;
#if XCHAL_HAVE_PTP_MMU && XCHAL_HAVE_SPANNING_WAY #if !XCHAL_HAVE_PTP_MMU || XCHAL_HAVE_SPANNING_WAY
unsigned long xtensa_kio_paddr = XCHAL_KIO_DEFAULT_PADDR; unsigned long xtensa_kio_paddr = XCHAL_KIO_DEFAULT_PADDR;
EXPORT_SYMBOL(xtensa_kio_paddr); EXPORT_SYMBOL(xtensa_kio_paddr);
...@@ -334,7 +334,10 @@ extern char _Level5InterruptVector_text_end; ...@@ -334,7 +334,10 @@ extern char _Level5InterruptVector_text_end;
extern char _Level6InterruptVector_text_start; extern char _Level6InterruptVector_text_start;
extern char _Level6InterruptVector_text_end; extern char _Level6InterruptVector_text_end;
#endif #endif
#ifdef CONFIG_SMP
extern char _SecondaryResetVector_text_start;
extern char _SecondaryResetVector_text_end;
#endif
#ifdef CONFIG_S32C1I_SELFTEST #ifdef CONFIG_S32C1I_SELFTEST
...@@ -506,6 +509,10 @@ void __init setup_arch(char **cmdline_p) ...@@ -506,6 +509,10 @@ void __init setup_arch(char **cmdline_p)
__pa(&_Level6InterruptVector_text_end), 0); __pa(&_Level6InterruptVector_text_end), 0);
#endif #endif
#ifdef CONFIG_SMP
mem_reserve(__pa(&_SecondaryResetVector_text_start),
__pa(&_SecondaryResetVector_text_end), 0);
#endif
parse_early_param(); parse_early_param();
bootmem_init(); bootmem_init();
......
...@@ -478,6 +478,9 @@ _DoubleExceptionVector_handle_exception: ...@@ -478,6 +478,9 @@ _DoubleExceptionVector_handle_exception:
ENDPROC(_DoubleExceptionVector) ENDPROC(_DoubleExceptionVector)
.end literal_prefix
.text
/* /*
* Fixup handler for TLB miss in double exception handler for window owerflow. * Fixup handler for TLB miss in double exception handler for window owerflow.
* We get here with windowbase set to the window that was being spilled and * We get here with windowbase set to the window that was being spilled and
...@@ -587,7 +590,6 @@ ENTRY(window_overflow_restore_a0_fixup) ...@@ -587,7 +590,6 @@ ENTRY(window_overflow_restore_a0_fixup)
ENDPROC(window_overflow_restore_a0_fixup) ENDPROC(window_overflow_restore_a0_fixup)
.end literal_prefix
/* /*
* Debug interrupt vector * Debug interrupt vector
* *
......
...@@ -166,8 +166,6 @@ SECTIONS ...@@ -166,8 +166,6 @@ SECTIONS
RELOCATE_ENTRY(_DebugInterruptVector_text, RELOCATE_ENTRY(_DebugInterruptVector_text,
.DebugInterruptVector.text); .DebugInterruptVector.text);
#if defined(CONFIG_SMP) #if defined(CONFIG_SMP)
RELOCATE_ENTRY(_SecondaryResetVector_literal,
.SecondaryResetVector.literal);
RELOCATE_ENTRY(_SecondaryResetVector_text, RELOCATE_ENTRY(_SecondaryResetVector_text,
.SecondaryResetVector.text); .SecondaryResetVector.text);
#endif #endif
...@@ -282,17 +280,11 @@ SECTIONS ...@@ -282,17 +280,11 @@ SECTIONS
#if defined(CONFIG_SMP) #if defined(CONFIG_SMP)
SECTION_VECTOR (_SecondaryResetVector_literal,
.SecondaryResetVector.literal,
RESET_VECTOR1_VADDR - 4,
SIZEOF(.DoubleExceptionVector.text),
.DoubleExceptionVector.text)
SECTION_VECTOR (_SecondaryResetVector_text, SECTION_VECTOR (_SecondaryResetVector_text,
.SecondaryResetVector.text, .SecondaryResetVector.text,
RESET_VECTOR1_VADDR, RESET_VECTOR1_VADDR,
4, SIZEOF(.DoubleExceptionVector.text),
.SecondaryResetVector.literal) .DoubleExceptionVector.text)
. = LOADADDR(.SecondaryResetVector.text)+SIZEOF(.SecondaryResetVector.text); . = LOADADDR(.SecondaryResetVector.text)+SIZEOF(.SecondaryResetVector.text);
...@@ -306,31 +298,6 @@ SECTIONS ...@@ -306,31 +298,6 @@ SECTIONS
_end = .; _end = .;
/* only used by the boot loader */
. = ALIGN(0x10);
.bootstrap : { *(.bootstrap.literal .bootstrap.text .bootstrap.data) }
.ResetVector.text RESET_VECTOR_VADDR :
{
*(.ResetVector.text)
}
/*
* This is a remapped copy of the Secondary Reset Vector Code.
* It keeps gdb in sync with the PC after switching
* to the temporary mapping used while setting up
* the V2 MMU mappings for Linux.
*
* Only debug information about this section is put in the kernel image.
*/
.SecondaryResetVector.remapped_text 0x46000000 (INFO):
{
*(.SecondaryResetVector.remapped_text)
}
.xt.lit : { *(.xt.lit) } .xt.lit : { *(.xt.lit) }
.xt.prop : { *(.xt.prop) } .xt.prop : { *(.xt.prop) }
......
...@@ -222,8 +222,8 @@ __xtensa_copy_user: ...@@ -222,8 +222,8 @@ __xtensa_copy_user:
loopnez a7, .Loop2done loopnez a7, .Loop2done
#else /* !XCHAL_HAVE_LOOPS */ #else /* !XCHAL_HAVE_LOOPS */
beqz a7, .Loop2done beqz a7, .Loop2done
slli a10, a7, 4 slli a12, a7, 4
add a10, a10, a3 # a10 = end of last 16B source chunk add a12, a12, a3 # a12 = end of last 16B source chunk
#endif /* !XCHAL_HAVE_LOOPS */ #endif /* !XCHAL_HAVE_LOOPS */
.Loop2: .Loop2:
EX(l32i, a7, a3, 4, l_fixup) EX(l32i, a7, a3, 4, l_fixup)
...@@ -241,7 +241,7 @@ __xtensa_copy_user: ...@@ -241,7 +241,7 @@ __xtensa_copy_user:
EX(s32i, a9, a5, 12, s_fixup) EX(s32i, a9, a5, 12, s_fixup)
addi a5, a5, 16 addi a5, a5, 16
#if !XCHAL_HAVE_LOOPS #if !XCHAL_HAVE_LOOPS
blt a3, a10, .Loop2 blt a3, a12, .Loop2
#endif /* !XCHAL_HAVE_LOOPS */ #endif /* !XCHAL_HAVE_LOOPS */
.Loop2done: .Loop2done:
bbci.l a4, 3, .L12 bbci.l a4, 3, .L12
......
...@@ -61,7 +61,9 @@ void platform_restart(void) ...@@ -61,7 +61,9 @@ void platform_restart(void)
#if XCHAL_NUM_IBREAK > 0 #if XCHAL_NUM_IBREAK > 0
"wsr a2, ibreakenable\n\t" "wsr a2, ibreakenable\n\t"
#endif #endif
#if XCHAL_HAVE_LOOPS
"wsr a2, lcount\n\t" "wsr a2, lcount\n\t"
#endif
"movi a2, 0x1f\n\t" "movi a2, 0x1f\n\t"
"wsr a2, ps\n\t" "wsr a2, ps\n\t"
"isync\n\t" "isync\n\t"
......
...@@ -72,7 +72,9 @@ void platform_restart(void) ...@@ -72,7 +72,9 @@ void platform_restart(void)
#if XCHAL_NUM_IBREAK > 0 #if XCHAL_NUM_IBREAK > 0
"wsr a2, ibreakenable\n\t" "wsr a2, ibreakenable\n\t"
#endif #endif
#if XCHAL_HAVE_LOOPS
"wsr a2, lcount\n\t" "wsr a2, lcount\n\t"
#endif
"movi a2, 0x1f\n\t" "movi a2, 0x1f\n\t"
"wsr a2, ps\n\t" "wsr a2, ps\n\t"
"isync\n\t" "isync\n\t"
......
...@@ -12,13 +12,15 @@ ...@@ -12,13 +12,15 @@
* This file contains the hardware configuration of the XTAVNET boards. * This file contains the hardware configuration of the XTAVNET boards.
*/ */
#include <asm/types.h>
#ifndef __XTENSA_XTAVNET_HARDWARE_H #ifndef __XTENSA_XTAVNET_HARDWARE_H
#define __XTENSA_XTAVNET_HARDWARE_H #define __XTENSA_XTAVNET_HARDWARE_H
/* Memory configuration. */ /* Memory configuration. */
#define PLATFORM_DEFAULT_MEM_START CONFIG_DEFAULT_MEM_START #define PLATFORM_DEFAULT_MEM_START __XTENSA_UL(CONFIG_DEFAULT_MEM_START)
#define PLATFORM_DEFAULT_MEM_SIZE CONFIG_DEFAULT_MEM_SIZE #define PLATFORM_DEFAULT_MEM_SIZE __XTENSA_UL(CONFIG_DEFAULT_MEM_SIZE)
/* Interrupt configuration. */ /* Interrupt configuration. */
......
...@@ -63,7 +63,9 @@ void platform_restart(void) ...@@ -63,7 +63,9 @@ void platform_restart(void)
#if XCHAL_NUM_IBREAK > 0 #if XCHAL_NUM_IBREAK > 0
"wsr a2, ibreakenable\n\t" "wsr a2, ibreakenable\n\t"
#endif #endif
#if XCHAL_HAVE_LOOPS
"wsr a2, lcount\n\t" "wsr a2, lcount\n\t"
#endif
"movi a2, 0x1f\n\t" "movi a2, 0x1f\n\t"
"wsr a2, ps\n\t" "wsr a2, ps\n\t"
"isync\n\t" "isync\n\t"
......
This diff is collapsed.
/*
* tie-asm.h -- compile-time HAL assembler definitions dependent on CORE & TIE
*
* NOTE: This header file is not meant to be included directly.
*/
/* This header file contains assembly-language definitions (assembly
macros, etc.) for this specific Xtensa processor's TIE extensions
and options. It is customized to this Xtensa processor configuration.
Copyright (c) 1999-2015 Cadence Design Systems Inc.
Permission is hereby granted, free of charge, to any person obtaining
a copy of this software and associated documentation files (the
"Software"), to deal in the Software without restriction, including
without limitation the rights to use, copy, modify, merge, publish,
distribute, sublicense, and/or sell copies of the Software, and to
permit persons to whom the Software is furnished to do so, subject to
the following conditions:
The above copyright notice and this permission notice shall be included
in all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. */
#ifndef _XTENSA_CORE_TIE_ASM_H
#define _XTENSA_CORE_TIE_ASM_H
/* Selection parameter values for save-area save/restore macros: */
/* Option vs. TIE: */
#define XTHAL_SAS_TIE 0x0001 /* custom extension or coprocessor */
#define XTHAL_SAS_OPT 0x0002 /* optional (and not a coprocessor) */
#define XTHAL_SAS_ANYOT 0x0003 /* both of the above */
/* Whether used automatically by compiler: */
#define XTHAL_SAS_NOCC 0x0004 /* not used by compiler w/o special opts/code */
#define XTHAL_SAS_CC 0x0008 /* used by compiler without special opts/code */
#define XTHAL_SAS_ANYCC 0x000C /* both of the above */
/* ABI handling across function calls: */
#define XTHAL_SAS_CALR 0x0010 /* caller-saved */
#define XTHAL_SAS_CALE 0x0020 /* callee-saved */
#define XTHAL_SAS_GLOB 0x0040 /* global across function calls (in thread) */
#define XTHAL_SAS_ANYABI 0x0070 /* all of the above three */
/* Misc */
#define XTHAL_SAS_ALL 0xFFFF /* include all default NCP contents */
#define XTHAL_SAS3(optie,ccuse,abi) ( ((optie) & XTHAL_SAS_ANYOT) \
| ((ccuse) & XTHAL_SAS_ANYCC) \
| ((abi) & XTHAL_SAS_ANYABI) )
/*
* Macro to store all non-coprocessor (extra) custom TIE and optional state
* (not including zero-overhead loop registers).
* Required parameters:
* ptr Save area pointer address register (clobbered)
* (register must contain a 4 byte aligned address).
* at1..at4 Four temporary address registers (first XCHAL_NCP_NUM_ATMPS
* registers are clobbered, the remaining are unused).
* Optional parameters:
* continue If macro invoked as part of a larger store sequence, set to 1
* if this is not the first in the sequence. Defaults to 0.
* ofs Offset from start of larger sequence (from value of first ptr
* in sequence) at which to store. Defaults to next available space
* (or 0 if <continue> is 0).
* select Select what category(ies) of registers to store, as a bitmask
* (see XTHAL_SAS_xxx constants). Defaults to all registers.
* alloc Select what category(ies) of registers to allocate; if any
* category is selected here that is not in <select>, space for
* the corresponding registers is skipped without doing any store.
*/
.macro xchal_ncp_store ptr at1 at2 at3 at4 continue=0 ofs=-1 select=XTHAL_SAS_ALL alloc=0
xchal_sa_start \continue, \ofs
// Optional caller-saved registers used by default by the compiler:
.ifeq (XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_CALR) & ~(\select)
xchal_sa_align \ptr, 0, 1016, 4, 4
rsr.ACCLO \at1 // MAC16 option
s32i \at1, \ptr, .Lxchal_ofs_+0
rsr.ACCHI \at1 // MAC16 option
s32i \at1, \ptr, .Lxchal_ofs_+4
.set .Lxchal_ofs_, .Lxchal_ofs_ + 8
.elseif ((XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_CALR) & ~(\alloc)) == 0
xchal_sa_align \ptr, 0, 1016, 4, 4
.set .Lxchal_ofs_, .Lxchal_ofs_ + 8
.endif
// Optional caller-saved registers not used by default by the compiler:
.ifeq (XTHAL_SAS_OPT | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~(\select)
xchal_sa_align \ptr, 0, 1004, 4, 4
rsr.SCOMPARE1 \at1 // conditional store option
s32i \at1, \ptr, .Lxchal_ofs_+0
rsr.M0 \at1 // MAC16 option
s32i \at1, \ptr, .Lxchal_ofs_+4
rsr.M1 \at1 // MAC16 option
s32i \at1, \ptr, .Lxchal_ofs_+8
rsr.M2 \at1 // MAC16 option
s32i \at1, \ptr, .Lxchal_ofs_+12
rsr.M3 \at1 // MAC16 option
s32i \at1, \ptr, .Lxchal_ofs_+16
.set .Lxchal_ofs_, .Lxchal_ofs_ + 20
.elseif ((XTHAL_SAS_OPT | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~(\alloc)) == 0
xchal_sa_align \ptr, 0, 1004, 4, 4
.set .Lxchal_ofs_, .Lxchal_ofs_ + 20
.endif
.endm // xchal_ncp_store
/*
* Macro to load all non-coprocessor (extra) custom TIE and optional state
* (not including zero-overhead loop registers).
* Required parameters:
* ptr Save area pointer address register (clobbered)
* (register must contain a 4 byte aligned address).
* at1..at4 Four temporary address registers (first XCHAL_NCP_NUM_ATMPS
* registers are clobbered, the remaining are unused).
* Optional parameters:
* continue If macro invoked as part of a larger load sequence, set to 1
* if this is not the first in the sequence. Defaults to 0.
* ofs Offset from start of larger sequence (from value of first ptr
* in sequence) at which to load. Defaults to next available space
* (or 0 if <continue> is 0).
* select Select what category(ies) of registers to load, as a bitmask
* (see XTHAL_SAS_xxx constants). Defaults to all registers.
* alloc Select what category(ies) of registers to allocate; if any
* category is selected here that is not in <select>, space for
* the corresponding registers is skipped without doing any load.
*/
.macro xchal_ncp_load ptr at1 at2 at3 at4 continue=0 ofs=-1 select=XTHAL_SAS_ALL alloc=0
xchal_sa_start \continue, \ofs
// Optional caller-saved registers used by default by the compiler:
.ifeq (XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_CALR) & ~(\select)
xchal_sa_align \ptr, 0, 1016, 4, 4
l32i \at1, \ptr, .Lxchal_ofs_+0
wsr.ACCLO \at1 // MAC16 option
l32i \at1, \ptr, .Lxchal_ofs_+4
wsr.ACCHI \at1 // MAC16 option
.set .Lxchal_ofs_, .Lxchal_ofs_ + 8
.elseif ((XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_CALR) & ~(\alloc)) == 0
xchal_sa_align \ptr, 0, 1016, 4, 4
.set .Lxchal_ofs_, .Lxchal_ofs_ + 8
.endif
// Optional caller-saved registers not used by default by the compiler:
.ifeq (XTHAL_SAS_OPT | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~(\select)
xchal_sa_align \ptr, 0, 1004, 4, 4
l32i \at1, \ptr, .Lxchal_ofs_+0
wsr.SCOMPARE1 \at1 // conditional store option
l32i \at1, \ptr, .Lxchal_ofs_+4
wsr.M0 \at1 // MAC16 option
l32i \at1, \ptr, .Lxchal_ofs_+8
wsr.M1 \at1 // MAC16 option
l32i \at1, \ptr, .Lxchal_ofs_+12
wsr.M2 \at1 // MAC16 option
l32i \at1, \ptr, .Lxchal_ofs_+16
wsr.M3 \at1 // MAC16 option
.set .Lxchal_ofs_, .Lxchal_ofs_ + 20
.elseif ((XTHAL_SAS_OPT | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~(\alloc)) == 0
xchal_sa_align \ptr, 0, 1004, 4, 4
.set .Lxchal_ofs_, .Lxchal_ofs_ + 20
.endif
.endm // xchal_ncp_load
#define XCHAL_NCP_NUM_ATMPS 1
#define XCHAL_SA_NUM_ATMPS 1
#endif /*_XTENSA_CORE_TIE_ASM_H*/
/*
* tie.h -- compile-time HAL definitions dependent on CORE & TIE configuration
*
* NOTE: This header file is not meant to be included directly.
*/
/* This header file describes this specific Xtensa processor's TIE extensions
that extend basic Xtensa core functionality. It is customized to this
Xtensa processor configuration.
Copyright (c) 1999-2015 Cadence Design Systems Inc.
Permission is hereby granted, free of charge, to any person obtaining
a copy of this software and associated documentation files (the
"Software"), to deal in the Software without restriction, including
without limitation the rights to use, copy, modify, merge, publish,
distribute, sublicense, and/or sell copies of the Software, and to
permit persons to whom the Software is furnished to do so, subject to
the following conditions:
The above copyright notice and this permission notice shall be included
in all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. */
#ifndef _XTENSA_CORE_TIE_H
#define _XTENSA_CORE_TIE_H
#define XCHAL_CP_NUM 0 /* number of coprocessors */
#define XCHAL_CP_MAX 0 /* max CP ID + 1 (0 if none) */
#define XCHAL_CP_MASK 0x00 /* bitmask of all CPs by ID */
#define XCHAL_CP_PORT_MASK 0x00 /* bitmask of only port CPs */
/* Save area for non-coprocessor optional and custom (TIE) state: */
#define XCHAL_NCP_SA_SIZE 28
#define XCHAL_NCP_SA_ALIGN 4
/* Total save area for optional and custom state (NCP + CPn): */
#define XCHAL_TOTAL_SA_SIZE 32 /* with 16-byte align padding */
#define XCHAL_TOTAL_SA_ALIGN 4 /* actual minimum alignment */
/*
* Detailed contents of save areas.
* NOTE: caller must define the XCHAL_SA_REG macro (not defined here)
* before expanding the XCHAL_xxx_SA_LIST() macros.
*
* XCHAL_SA_REG(s,ccused,abikind,kind,opt,name,galign,align,asize,
* dbnum,base,regnum,bitsz,gapsz,reset,x...)
*
* s = passed from XCHAL_*_LIST(s), eg. to select how to expand
* ccused = set if used by compiler without special options or code
* abikind = 0 (caller-saved), 1 (callee-saved), or 2 (thread-global)
* kind = 0 (special reg), 1 (TIE user reg), or 2 (TIE regfile reg)
* opt = 0 (custom TIE extension or coprocessor), or 1 (optional reg)
* name = lowercase reg name (no quotes)
* galign = group byte alignment (power of 2) (galign >= align)
* align = register byte alignment (power of 2)
* asize = allocated size in bytes (asize*8 == bitsz + gapsz + padsz)
* (not including any pad bytes required to galign this or next reg)
* dbnum = unique target number f/debug (see <xtensa-libdb-macros.h>)
* base = reg shortname w/o index (or sr=special, ur=TIE user reg)
* regnum = reg index in regfile, or special/TIE-user reg number
* bitsz = number of significant bits (regfile width, or ur/sr mask bits)
* gapsz = intervening bits, if bitsz bits not stored contiguously
* (padsz = pad bits at end [TIE regfile] or at msbits [ur,sr] of asize)
* reset = register reset value (or 0 if undefined at reset)
* x = reserved for future use (0 until then)
*
* To filter out certain registers, e.g. to expand only the non-global
* registers used by the compiler, you can do something like this:
*
* #define XCHAL_SA_REG(s,ccused,p...) SELCC##ccused(p)
* #define SELCC0(p...)
* #define SELCC1(abikind,p...) SELAK##abikind(p)
* #define SELAK0(p...) REG(p)
* #define SELAK1(p...) REG(p)
* #define SELAK2(p...)
* #define REG(kind,tie,name,galn,aln,asz,csz,dbnum,base,rnum,bsz,rst,x...) \
* ...what you want to expand...
*/
#define XCHAL_NCP_SA_NUM 7
#define XCHAL_NCP_SA_LIST(s) \
XCHAL_SA_REG(s,1,0,0,1, acclo, 4, 4, 4,0x0210, sr,16 , 32,0,0,0) \
XCHAL_SA_REG(s,1,0,0,1, acchi, 4, 4, 4,0x0211, sr,17 , 8,0,0,0) \
XCHAL_SA_REG(s,0,0,0,1, scompare1, 4, 4, 4,0x020C, sr,12 , 32,0,0,0) \
XCHAL_SA_REG(s,0,0,0,1, m0, 4, 4, 4,0x0220, sr,32 , 32,0,0,0) \
XCHAL_SA_REG(s,0,0,0,1, m1, 4, 4, 4,0x0221, sr,33 , 32,0,0,0) \
XCHAL_SA_REG(s,0,0,0,1, m2, 4, 4, 4,0x0222, sr,34 , 32,0,0,0) \
XCHAL_SA_REG(s,0,0,0,1, m3, 4, 4, 4,0x0223, sr,35 , 32,0,0,0)
#define XCHAL_CP0_SA_NUM 0
#define XCHAL_CP0_SA_LIST(s) /* empty */
#define XCHAL_CP1_SA_NUM 0
#define XCHAL_CP1_SA_LIST(s) /* empty */
#define XCHAL_CP2_SA_NUM 0
#define XCHAL_CP2_SA_LIST(s) /* empty */
#define XCHAL_CP3_SA_NUM 0
#define XCHAL_CP3_SA_LIST(s) /* empty */
#define XCHAL_CP4_SA_NUM 0
#define XCHAL_CP4_SA_LIST(s) /* empty */
#define XCHAL_CP5_SA_NUM 0
#define XCHAL_CP5_SA_LIST(s) /* empty */
#define XCHAL_CP6_SA_NUM 0
#define XCHAL_CP6_SA_LIST(s) /* empty */
#define XCHAL_CP7_SA_NUM 0
#define XCHAL_CP7_SA_LIST(s) /* empty */
/* Byte length of instruction from its first nibble (op0 field), per FLIX. */
#define XCHAL_OP0_FORMAT_LENGTHS 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3
/* Byte length of instruction from its first byte, per FLIX. */
#define XCHAL_BYTE0_FORMAT_LENGTHS \
3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3, 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3,\
3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3, 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3,\
3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3, 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3,\
3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3, 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3,\
3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3, 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3,\
3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3, 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3,\
3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3, 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3,\
3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3, 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3
#endif /*_XTENSA_CORE_TIE_H*/
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment