Commit afbb1169 authored by Hans de Goede's avatar Hans de Goede Committed by Jiri Kosina

HID: i2c-hid: Remove RESEND_REPORT_DESCR quirk and its handling

Commit 52cf93e6 ("HID: i2c-hid: Don't reset device upon system resume")
removes the need for the RESEND_REPORT_DESCR quirk for Raydium devices, but
kept it for the SIS device id 10FB touchscreens, as the author of that
commit could not determine if the quirk is still necessary there.

I've tested suspend/resume on a Toshiba Click Mini L9W-B which is the
device for which this quirk was added in the first place and with the
"Don't reset device upon system resume" fix the quirk is no longer
necessary, so this commit removes it.

Note even better I also had some other devices with SIS touchscreens which
suspend/resume issues, where the RESEND_REPORT_DESCR quirk did not help.

I've also tested these devices with the "Don't reset device upon system
resume" fix and I'm happy to report that that fix also fixes touchscreen
resume on the following devices:

Asus T100HA
Asus T200TA
Peaq C1010

Cc: Kai-Heng Feng <kai.heng.feng@canonical.com>
Acked-by: default avatarBenjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: default avatarHans de Goede <hdegoede@redhat.com>
Signed-off-by: default avatarJiri Kosina <jkosina@suse.cz>
parent 807588ac
......@@ -976,7 +976,6 @@
#define USB_DEVICE_ID_SIS817_TOUCH 0x0817
#define USB_DEVICE_ID_SIS_TS 0x1013
#define USB_DEVICE_ID_SIS1030_TOUCH 0x1030
#define USB_DEVICE_ID_SIS10FB_TOUCH 0x10fb
#define USB_VENDOR_ID_SKYCABLE 0x1223
#define USB_DEVICE_ID_SKYCABLE_WIRELESS_PRESENTER 0x3F07
......
......@@ -47,8 +47,7 @@
/* quirks to control the device */
#define I2C_HID_QUIRK_SET_PWR_WAKEUP_DEV BIT(0)
#define I2C_HID_QUIRK_NO_IRQ_AFTER_RESET BIT(1)
#define I2C_HID_QUIRK_RESEND_REPORT_DESCR BIT(2)
#define I2C_HID_QUIRK_NO_RUNTIME_PM BIT(3)
#define I2C_HID_QUIRK_NO_RUNTIME_PM BIT(2)
/* flags */
#define I2C_HID_STARTED 0
......@@ -172,8 +171,6 @@ static const struct i2c_hid_quirks {
{ I2C_VENDOR_ID_HANTICK, I2C_PRODUCT_ID_HANTICK_5288,
I2C_HID_QUIRK_NO_IRQ_AFTER_RESET |
I2C_HID_QUIRK_NO_RUNTIME_PM },
{ USB_VENDOR_ID_SIS_TOUCH, USB_DEVICE_ID_SIS10FB_TOUCH,
I2C_HID_QUIRK_RESEND_REPORT_DESCR },
{ 0, 0 }
};
......@@ -1241,22 +1238,13 @@ static int i2c_hid_resume(struct device *dev)
/* Instead of resetting device, simply powers the device on. This
* solves "incomplete reports" on Raydium devices 2386:3118 and
* 2386:4B33
* 2386:4B33 and fixes various SIS touchscreens no longer sending
* data after a suspend/resume.
*/
ret = i2c_hid_set_power(client, I2C_HID_PWR_ON);
if (ret)
return ret;
/* Some devices need to re-send report descr cmd
* after resume, after this it will be back normal.
* otherwise it issues too many incomplete reports.
*/
if (ihid->quirks & I2C_HID_QUIRK_RESEND_REPORT_DESCR) {
ret = i2c_hid_command(client, &hid_report_descr_cmd, NULL, 0);
if (ret)
return ret;
}
if (hid->driver && hid->driver->reset_resume) {
ret = hid->driver->reset_resume(hid);
return ret;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment