phy: qcom-qmp: add support for sm8250-usb3-dp phy

Add support for QMP V4 Combo USB3+DP PHY (for SM8250 platform).
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210331151614.3810197-6-dmitry.baryshkov@linaro.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

drivers/phy/qualcomm/phy-qcom-qmp.h

@@ -397,6 +397,7 @@
 #define QSERDES_V3_DP_PHY_STATUS			0x0c0
 
 /* Only for QMP V4 PHY - QSERDES COM registers */
+#define QSERDES_V4_COM_BG_TIMER				0x00c
 #define QSERDES_V4_COM_SSC_EN_CENTER			0x010
 #define QSERDES_V4_COM_SSC_PER1				0x01c
 #define QSERDES_V4_COM_SSC_PER2				0x020
@@ -404,7 +405,9 @@
 #define QSERDES_V4_COM_SSC_STEP_SIZE2_MODE0		0x028
 #define QSERDES_V4_COM_SSC_STEP_SIZE1_MODE1		0x030
 #define QSERDES_V4_COM_SSC_STEP_SIZE2_MODE1		0x034
+#define QSERDES_V4_COM_BIAS_EN_CLKBUFLR_EN		0x044
 #define QSERDES_V4_COM_CLK_ENABLE1			0x048
+#define QSERDES_V4_COM_SYS_CLK_CTRL			0x04c
 #define QSERDES_V4_COM_SYSCLK_BUF_ENABLE		0x050
 #define QSERDES_V4_COM_PLL_IVCO				0x058
 #define QSERDES_V4_COM_CMN_IPTRIM			0x060
@@ -415,6 +418,7 @@
 #define QSERDES_V4_COM_PLL_CCTRL_MODE0			0x084
 #define QSERDES_V4_COM_PLL_CCTRL_MODE1			0x088
 #define QSERDES_V4_COM_SYSCLK_EN_SEL			0x094
+#define QSERDES_V4_COM_RESETSM_CNTRL			0x09c
 #define QSERDES_V4_COM_LOCK_CMP_EN			0x0a4
 #define QSERDES_V4_COM_LOCK_CMP1_MODE0			0x0ac
 #define QSERDES_V4_COM_LOCK_CMP2_MODE0			0x0b0
@@ -428,16 +432,24 @@
 #define QSERDES_V4_COM_DIV_FRAC_START1_MODE1		0x0d8
 #define QSERDES_V4_COM_DIV_FRAC_START2_MODE1		0x0dc
 #define QSERDES_V4_COM_DIV_FRAC_START3_MODE1		0x0e0
+#define QSERDES_V4_COM_INTEGLOOP_GAIN0_MODE0		0x0ec
+#define QSERDES_V4_COM_INTEGLOOP_GAIN1_MODE0		0x0f0
+#define QSERDES_V4_COM_VCO_TUNE_CTRL			0x108
 #define QSERDES_V4_COM_VCO_TUNE_MAP			0x10c
 #define QSERDES_V4_COM_VCO_TUNE1_MODE0			0x110
 #define QSERDES_V4_COM_VCO_TUNE2_MODE0			0x114
 #define QSERDES_V4_COM_VCO_TUNE1_MODE1			0x118
 #define QSERDES_V4_COM_VCO_TUNE2_MODE1			0x11c
 #define QSERDES_V4_COM_VCO_TUNE_INITVAL2		0x124
+#define QSERDES_V4_COM_CMN_STATUS			0x140
 #define QSERDES_V4_COM_CLK_SELECT			0x154
 #define QSERDES_V4_COM_HSCLK_SEL			0x158
 #define QSERDES_V4_COM_HSCLK_HS_SWITCH_SEL		0x15c
+#define QSERDES_V4_COM_CORECLK_DIV_MODE0		0x168
 #define QSERDES_V4_COM_CORECLK_DIV_MODE1		0x16c
+#define QSERDES_V4_COM_CORE_CLK_EN			0x174
+#define QSERDES_V4_COM_C_READY_STATUS			0x178
+#define QSERDES_V4_COM_CMN_CONFIG			0x17c
 #define QSERDES_V4_COM_SVS_MODE_CLK_SEL			0x184
 #define QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE0	0x1ac
 #define QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE0	0x1b0
@@ -446,19 +458,32 @@
 #define QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE1	0x1b8
 
 /* Only for QMP V4 PHY - TX registers */
+#define QSERDES_V4_TX_CLKBUF_ENABLE			0x08
+#define QSERDES_V4_TX_TX_EMP_POST1_LVL			0x0c
+#define QSERDES_V4_TX_TX_DRV_LVL			0x14
+#define QSERDES_V4_TX_RESET_TSYNC_EN			0x1c
+#define QSERDES_V4_TX_PRE_STALL_LDO_BOOST_EN		0x20
+#define QSERDES_V4_TX_TX_BAND				0x24
+#define QSERDES_V4_TX_INTERFACE_SELECT			0x2c
 #define QSERDES_V4_TX_RES_CODE_LANE_TX			0x34
 #define QSERDES_V4_TX_RES_CODE_LANE_RX			0x38
 #define QSERDES_V4_TX_RES_CODE_LANE_OFFSET_TX 		0x3c
 #define QSERDES_V4_TX_RES_CODE_LANE_OFFSET_RX 		0x40
+#define QSERDES_V4_TX_TRANSCEIVER_BIAS_EN		0x54
+#define QSERDES_V4_TX_HIGHZ_DRVR_EN			0x58
+#define QSERDES_V4_TX_TX_POL_INV			0x5c
+#define QSERDES_V4_TX_PARRATE_REC_DETECT_IDLE_EN	0x60
 #define QSERDES_V4_TX_LANE_MODE_1			0x84
 #define QSERDES_V4_TX_LANE_MODE_2			0x88
 #define QSERDES_V4_TX_RCV_DETECT_LVL_2			0x9c
+#define QSERDES_V4_TX_TRAN_DRVR_EMP_EN			0xb8
+#define QSERDES_V4_TX_TX_INTERFACE_MODE			0xbc
 #define QSERDES_V4_TX_PWM_GEAR_1_DIVIDER_BAND0_1	0xd8
 #define QSERDES_V4_TX_PWM_GEAR_2_DIVIDER_BAND0_1	0xdC
 #define QSERDES_V4_TX_PWM_GEAR_3_DIVIDER_BAND0_1	0xe0
 #define QSERDES_V4_TX_PWM_GEAR_4_DIVIDER_BAND0_1	0xe4
-#define QSERDES_V4_TX_TRAN_DRVR_EMP_EN			0xb8
-#define QSERDES_V4_TX_PI_QEC_CTRL		0x104
+#define QSERDES_V4_TX_VMODE_CTRL1			0xe8
+#define QSERDES_V4_TX_PI_QEC_CTRL			0x104
 
 /* Only for QMP V4 PHY - RX registers */
 #define QSERDES_V4_RX_UCDR_FO_GAIN			0x008
@@ -515,6 +540,17 @@
 #define QSERDES_V4_RX_DCC_CTRL1				0x1bc
 #define QSERDES_V4_RX_VTH_CODE				0x1c4
 
+/* Only for QMP V4 PHY - DP PHY registers */
+#define QSERDES_V4_DP_PHY_CFG_1				0x014
+#define QSERDES_V4_DP_PHY_AUX_INTERRUPT_MASK		0x054
+#define QSERDES_V4_DP_PHY_AUX_INTERRUPT_CLEAR		0x058
+#define QSERDES_V4_DP_PHY_VCO_DIV			0x070
+#define QSERDES_V4_DP_PHY_TX0_TX1_LANE_CTL		0x078
+#define QSERDES_V4_DP_PHY_TX2_TX3_LANE_CTL		0x09c
+#define QSERDES_V4_DP_PHY_SPARE0			0x0c8
+#define QSERDES_V4_DP_PHY_AUX_INTERRUPT_STATUS		0x0d8
+#define QSERDES_V4_DP_PHY_STATUS			0x0dc
+
 /* Only for QMP V4 PHY - UFS PCS registers */
 #define QPHY_V4_PCS_UFS_PHY_START				0x000
 #define QPHY_V4_PCS_UFS_POWER_DOWN_CONTROL			0x004