Commit b05465ff authored by Roger Shimizu's avatar Roger Shimizu Committed by Gregory CLEMENT

ARM: dts: kirkwood: split lswxl dts to linkstation lswsxl and lswxl

LS-WXL/WSXL are both kirkwood-6281 based 2-Bay NAS devices, which share
many MPP pins. However they are slightly different:
  - There're two red LED indicator on LS-WXL to show when HDD fails,
    but there's no such on LS-WSXL.
  - There's 4-level speed adjustable FAN on LS-WXL, but not LS-WSXL.

So after the split, common part goes into .dtsi file:
  - kirkwood-linkstation.dtsi
  - kirkwood-linkstation-duo-6281.dtsi
while all rest part goes into device specific .dts file:
  - kirkwood-linkstation-lswsxl.dts
  - kirkwood-linkstation-lswxl.dts
Signed-off-by: default avatarRoger Shimizu <rogershimizu@gmail.com>
Reviewed-by: default avatarAndrew Lunn <andrew@lunn.ch>
Signed-off-by: default avatarGregory CLEMENT <gregory.clement@free-electrons.com>
parent 3e2f2db8
......@@ -19,9 +19,10 @@ SoC. Currently known SoC compatibles are:
And in addition, the compatible shall be extended with the specific
board. Currently known boards are:
"buffalo,linkstation-lswsxl"
"buffalo,linkstation-lswxl"
"buffalo,lschlv2"
"buffalo,lswvl"
"buffalo,lswxl"
"buffalo,lsxhl"
"buffalo,lsxl"
"cloudengines,pogo02"
......
......@@ -189,9 +189,10 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
kirkwood-is2.dtb \
kirkwood-km_kirkwood.dtb \
kirkwood-laplug.dtb \
kirkwood-linkstation-lswsxl.dtb \
kirkwood-linkstation-lswxl.dtb \
kirkwood-lschlv2.dtb \
kirkwood-lswvl.dtb \
kirkwood-lswxl.dtb \
kirkwood-lsxhl.dtb \
kirkwood-mplcec4.dtb \
kirkwood-mv88f6281gtw-ge.dtb \
......
/*
* Device Tree common file for kirkwood-6281 based 2-Bay Buffalo Linkstation
*
* Copyright (C) 2015, 2016
* Roger Shimizu <rogershimizu@gmail.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
#include "kirkwood.dtsi"
#include "kirkwood-6281.dtsi"
#include "kirkwood-linkstation.dtsi"
/ {
ocp@f1000000 {
pinctrl: pin-controller@10000 {
pmx_power_hdd0: pmx-power-hdd0 {
marvell,pins = "mpp28";
marvell,function = "gpio";
};
pmx_power_hdd1: pmx-power-hdd1 {
marvell,pins = "mpp29";
marvell,function = "gpio";
};
pmx_usb_vbus: pmx-usb-vbus {
marvell,pins = "mpp37";
marvell,function = "gpio";
};
pmx_led_alarm: pmx-led-alarm {
marvell,pins = "mpp49";
marvell,function = "gpio";
};
pmx_led_function_red: pmx-led-function-red {
marvell,pins = "mpp34";
marvell,function = "gpio";
};
pmx_led_function_blue: pmx-led-function-blue {
marvell,pins = "mpp36";
marvell,function = "gpio";
};
pmx_led_info: pmx-led-info {
marvell,pins = "mpp38";
marvell,function = "gpio";
};
pmx_led_power: pmx-led-power {
marvell,pins = "mpp39";
marvell,function = "gpio";
};
pmx_button_function: pmx-button-function {
marvell,pins = "mpp41";
marvell,function = "gpio";
};
pmx_power_switch: pmx-power-switch {
marvell,pins = "mpp42";
marvell,function = "gpio";
};
pmx_power_auto_switch: pmx-power-auto-switch {
marvell,pins = "mpp43";
marvell,function = "gpio";
};
};
sata@80000 {
nr-ports = <2>;
};
};
gpio_keys {
function-button {
gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
};
power-on-switch {
gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
};
power-auto-switch {
gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
};
};
gpio_leds {
red-alarm-led {
label = "linkstation:red:alarm";
gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
};
red-function-led {
label = "linkstation:red:function";
gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
};
amber-info-led {
label = "linkstation:amber:info";
gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
};
blue-function-led {
label = "linkstation:blue:function";
gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
};
blue-power-led {
label = "linkstation:blue:power";
gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
default-state = "keep";
};
};
regulators {
pinctrl-0 = <&pmx_power_hdd0 &pmx_power_hdd1 &pmx_usb_vbus>;
usb_power: regulator@1 {
gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
};
hdd_power0: regulator@2 {
gpio = <&gpio0 28 GPIO_ACTIVE_HIGH>;
};
hdd_power1: regulator@3 {
compatible = "regulator-fixed";
reg = <3>;
regulator-name = "HDD1 Power";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
regulator-always-on;
regulator-boot-on;
gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
};
};
};
&mdio {
status = "okay";
ethphy1: ethernet-phy@8 {
device_type = "ethernet-phy";
reg = <8>;
};
};
&eth1 {
status = "okay";
ethernet1-port@0 {
phy-handle = <&ethphy1>;
};
};
/*
* Device Tree file for Buffalo Linkstation LS-WSXL
*
* Copyright (C) 2015, 2016
* Roger Shimizu <rogershimizu@gmail.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "kirkwood-linkstation-duo-6281.dtsi"
/ {
model = "Buffalo Linkstation LS-WSXL";
compatible = "buffalo,lswsxl", "marvell,kirkwood-88f6281", "marvell,kirkwood";
memory { /* 128 MB */
device_type = "memory";
reg = <0x00000000 0x8000000>;
};
};
/*
* Device Tree file for Buffalo Linkstation LS-WXL
*
* Copyright (C) 2015, 2016
* Roger Shimizu <rogershimizu@gmail.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "kirkwood-linkstation-duo-6281.dtsi"
/ {
model = "Buffalo Linkstation LS-WXL";
compatible = "buffalo,lswxl", "marvell,kirkwood-88f6281", "marvell,kirkwood";
memory { /* 128 MB */
device_type = "memory";
reg = <0x00000000 0x8000000>;
};
ocp@f1000000 {
pinctrl: pin-controller@10000 {
pmx_led_hdderr0: pmx-led-hdderr0 {
marvell,pins = "mpp8";
marvell,function = "gpio";
};
pmx_led_hdderr1: pmx-led-hdderr1 {
marvell,pins = "mpp46";
marvell,function = "gpio";
};
pmx_fan_lock: pmx-fan-lock {
marvell,pins = "mpp40";
marvell,function = "gpio";
};
pmx_fan_high: pmx-fan-high {
marvell,pins = "mpp47";
marvell,function = "gpio";
};
pmx_fan_low: pmx-fan-low {
marvell,pins = "mpp48";
marvell,function = "gpio";
};
};
};
gpio_leds {
pinctrl-0 = <&pmx_led_function_red &pmx_led_alarm
&pmx_led_info &pmx_led_power
&pmx_led_function_blue
&pmx_led_hdderr0
&pmx_led_hdderr1>;
red-hdderr0-led {
label = "linkstation:red:hdderr0";
gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
};
red-hdderr1-led {
label = "linkstation:red:hdderr1";
gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
};
};
gpio_fan {
compatible = "gpio-fan";
pinctrl-0 = <&pmx_fan_low &pmx_fan_high &pmx_fan_lock>;
pinctrl-names = "default";
gpios = <&gpio1 16 GPIO_ACTIVE_LOW
&gpio1 15 GPIO_ACTIVE_LOW>;
gpio-fan,speed-map = <0 3
1500 2
3250 1
5000 0>;
alarm-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
};
};
/*
* Device Tree file for Buffalo Linkstation LS-WXL/WSXL
* Device Tree common file for kirkwood based Buffalo Linkstation
*
* Copyright (C) 2015, 2016
* Roger Shimizu <rogershimizu@gmail.com>
......@@ -43,20 +43,7 @@
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "kirkwood.dtsi"
#include "kirkwood-6281.dtsi"
/ {
model = "Buffalo Linkstation LS-WXL/WSXL";
compatible = "buffalo,lswxl", "marvell,kirkwood-88f6281", "marvell,kirkwood";
memory { /* 128 MB */
device_type = "memory";
reg = <0x00000000 0x8000000>;
};
chosen {
bootargs = "console=ttyS0,115200n8 earlyprintk";
stdout-path = &uart0;
......@@ -74,67 +61,33 @@ pcie@1,0 {
ocp@f1000000 {
pinctrl: pin-controller@10000 {
pmx_power_hdd0: pmx-power-hdd0 {
marvell,pins = "mpp28";
marvell,function = "gpio";
};
pmx_power_hdd1: pmx-power-hdd1 {
marvell,pins = "mpp29";
marvell,function = "gpio";
};
pmx_usb_vbus: pmx-usb-vbus {
marvell,pins = "mpp37";
marvell,function = "gpio";
};
pmx_fan_high: pmx-fan-high {
marvell,pins = "mpp47";
marvell,function = "gpio";
};
pmx_fan_low: pmx-fan-low {
marvell,pins = "mpp48";
marvell,function = "gpio";
};
pmx_led_hdderr0: pmx-led-hdderr0 {
marvell,pins = "mpp8";
marvell,function = "gpio";
};
pmx_led_hdderr1: pmx-led-hdderr1 {
marvell,pins = "mpp46";
marvell,function = "gpio";
};
pmx_led_alarm: pmx-led-alarm {
marvell,pins = "mpp49";
marvell,function = "gpio";
};
pmx_led_function_red: pmx-led-function-red {
marvell,pins = "mpp34";
marvell,function = "gpio";
};
pmx_led_function_blue: pmx-led-function-blue {
marvell,pins = "mpp36";
marvell,function = "gpio";
};
pmx_led_info: pmx-led-info {
marvell,pins = "mpp38";
marvell,function = "gpio";
};
pmx_led_power: pmx-led-power {
marvell,pins = "mpp39";
marvell,function = "gpio";
};
pmx_fan_lock: pmx-fan-lock {
marvell,pins = "mpp40";
marvell,function = "gpio";
};
pmx_button_function: pmx-button-function {
marvell,pins = "mpp41";
marvell,function = "gpio";
};
pmx_power_switch: pmx-power-switch {
marvell,pins = "mpp42";
marvell,function = "gpio";
};
pmx_power_auto_switch: pmx-power-auto-switch {
marvell,pins = "mpp43";
marvell,function = "gpio";
};
};
......@@ -145,7 +98,7 @@ serial@12000 {
sata@80000 {
status = "okay";
nr-ports = <2>;
nr-ports = <1>;
};
spi@10600 {
......@@ -187,24 +140,21 @@ gpio_keys {
&pmx_power_auto_switch>;
pinctrl-names = "default";
button@1 {
function-button {
label = "Function Button";
linux,code = <KEY_OPTION>;
gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
};
button@2 {
power-on-switch {
label = "Power-on Switch";
linux,code = <KEY_RESERVED>;
linux,input-type = <5>;
gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
};
button@3 {
power-auto-switch {
label = "Power-auto Switch";
linux,code = <KEY_ESC>;
linux,input-type = <5>;
gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
};
};
......@@ -212,62 +162,8 @@ gpio_leds {
compatible = "gpio-leds";
pinctrl-0 = <&pmx_led_function_red &pmx_led_alarm
&pmx_led_info &pmx_led_power
&pmx_led_function_blue
&pmx_led_hdderr0
&pmx_led_hdderr1>;
&pmx_led_function_blue>;
pinctrl-names = "default";
led@1 {
label = "lswxl:blue:func";
gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
};
led@2 {
label = "lswxl:red:alarm";
gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
};
led@3 {
label = "lswxl:amber:info";
gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
};
led@4 {
label = "lswxl:blue:power";
gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
default-state = "keep";
};
led@5 {
label = "lswxl:red:func";
gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
};
led@6 {
label = "lswxl:red:hdderr0";
gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
};
led@7 {
label = "lswxl:red:hdderr1";
gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
};
};
gpio_fan {
compatible = "gpio-fan";
pinctrl-0 = <&pmx_fan_low &pmx_fan_high &pmx_fan_lock>;
pinctrl-names = "default";
gpios = <&gpio1 16 GPIO_ACTIVE_LOW
&gpio1 15 GPIO_ACTIVE_LOW>;
gpio-fan,speed-map = <0 3
1500 2
3250 1
5000 0>;
alarm-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
};
restart_poweroff {
......@@ -278,7 +174,7 @@ regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
pinctrl-0 = <&pmx_power_hdd0 &pmx_power_hdd1 &pmx_usb_vbus>;
pinctrl-0 = <&pmx_power_hdd0 &pmx_usb_vbus>;
pinctrl-names = "default";
usb_power: regulator@1 {
......@@ -290,8 +186,8 @@ usb_power: regulator@1 {
enable-active-high;
regulator-always-on;
regulator-boot-on;
gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
};
hdd_power0: regulator@2 {
compatible = "regulator-fixed";
reg = <2>;
......@@ -301,35 +197,6 @@ hdd_power0: regulator@2 {
enable-active-high;
regulator-always-on;
regulator-boot-on;
gpio = <&gpio0 28 GPIO_ACTIVE_HIGH>;
};
hdd_power1: regulator@3 {
compatible = "regulator-fixed";
reg = <3>;
regulator-name = "HDD1 Power";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
regulator-always-on;
regulator-boot-on;
gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
};
};
};
&mdio {
status = "okay";
ethphy1: ethernet-phy@8 {
device_type = "ethernet-phy";
reg = <8>;
};
};
&eth1 {
status = "okay";
ethernet1-port@0 {
phy-handle = <&ethphy1>;
};
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment