Commit b130b0d5 authored by Suganath prabu Subramani's avatar Suganath prabu Subramani Committed by Martin K. Petersen

mpt3sas: Added support for high port count HBA variants.

Updated hardware description headers with MPI v2.6 and
mpt3sas_pci_table[] with vendor_ids, device_ids of Cutlass and Intruder
HBA which have support for 4 ports.
Signed-off-by: default avatarSuganath prabu Subramani <suganath-prabu.subramani@avagotech.com>
Signed-off-by: default avatarChaitra P B <chaitra.basappa@avagotech.com>
Reviewed-by: default avatarTomas Henzl <thenzl@redhat.com>
Signed-off-by: default avatarMartin K. Petersen <martin.petersen@oracle.com>
parent 8038e645
/*
* Copyright (c) 2000-2014 LSI Corporation.
* Copyright 2000-2015 Avago Technologies. All rights reserved.
*
*
* Name: mpi2.h
......@@ -8,7 +8,7 @@
* scatter/gather formats.
* Creation Date: June 21, 2006
*
* mpi2.h Version: 02.00.35
* mpi2.h Version: 02.00.37
*
* NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25
* prefix are for use only on MPI v2.5 products, and must not be used
......@@ -92,6 +92,12 @@
* 12-05-13 02.00.33 Bumped MPI2_HEADER_VERSION_UNIT.
* 01-08-14 02.00.34 Bumped MPI2_HEADER_VERSION_UNIT
* 06-13-14 02.00.35 Bumped MPI2_HEADER_VERSION_UNIT.
* 11-18-14 02.00.36 Updated copyright information.
* Bumped MPI2_HEADER_VERSION_UNIT.
* 03-xx-15 02.00.37 Bumped MPI2_HEADER_VERSION_UNIT.
* Added Scratchpad registers to
* MPI2_SYSTEM_INTERFACE_REGS.
* Added MPI2_DIAG_SBR_RELOAD.
* --------------------------------------------------------------------------
*/
......@@ -124,6 +130,12 @@
MPI25_VERSION_MINOR)
#define MPI2_VERSION_02_05 (0x0205)
/*minor version for MPI v2.6 compatible products */
#define MPI26_VERSION_MINOR (0x06)
#define MPI26_VERSION ((MPI2_VERSION_MAJOR << MPI2_VERSION_MAJOR_SHIFT) | \
MPI26_VERSION_MINOR)
#define MPI2_VERSION_02_06 (0x0206)
/*Unit and Dev versioning for this MPI header set */
#define MPI2_HEADER_VERSION_UNIT (0x23)
#define MPI2_HEADER_VERSION_DEV (0x00)
......@@ -179,10 +191,12 @@ typedef volatile struct _MPI2_SYSTEM_INTERFACE_REGS {
U32 HCBSize; /*0x74 */
U32 HCBAddressLow; /*0x78 */
U32 HCBAddressHigh; /*0x7C */
U32 Reserved6[16]; /*0x80 */
U32 Reserved6[12]; /*0x80 */
U32 Scratchpad[4]; /*0xB0 */
U32 RequestDescriptorPostLow; /*0xC0 */
U32 RequestDescriptorPostHigh; /*0xC4 */
U32 Reserved7[14]; /*0xC8 */
U32 AtomicRequestDescriptorPost;/*0xC8 */
U32 Reserved7[13]; /*0xCC */
} MPI2_SYSTEM_INTERFACE_REGS,
*PTR_MPI2_SYSTEM_INTERFACE_REGS,
Mpi2SystemInterfaceRegs_t,
......@@ -224,6 +238,8 @@ typedef volatile struct _MPI2_SYSTEM_INTERFACE_REGS {
*/
#define MPI2_HOST_DIAGNOSTIC_OFFSET (0x00000008)
#define MPI2_DIAG_SBR_RELOAD (0x00002000)
#define MPI2_DIAG_BOOT_DEVICE_SELECT_MASK (0x00001800)
#define MPI2_DIAG_BOOT_DEVICE_SELECT_DEFAULT (0x00000000)
#define MPI2_DIAG_BOOT_DEVICE_SELECT_HCDW (0x00000800)
......@@ -298,10 +314,19 @@ typedef volatile struct _MPI2_SYSTEM_INTERFACE_REGS {
#define MPI2_HCB_ADDRESS_HIGH_OFFSET (0x0000007C)
/*
*Offsets for the Request Queue
*Offsets for the Scratchpad registers
*/
#define MPI26_SCRATCHPAD0_OFFSET (0x000000B0)
#define MPI26_SCRATCHPAD1_OFFSET (0x000000B4)
#define MPI26_SCRATCHPAD2_OFFSET (0x000000B8)
#define MPI26_SCRATCHPAD3_OFFSET (0x000000BC)
/*
*Offsets for the Request Descriptor Post Queue
*/
#define MPI2_REQUEST_DESCRIPTOR_POST_LOW_OFFSET (0x000000C0)
#define MPI2_REQUEST_DESCRIPTOR_POST_HIGH_OFFSET (0x000000C4)
#define MPI26_ATOMIC_REQUEST_DESCRIPTOR_POST_OFFSET (0x000000C8)
/*Hard Reset delay timings */
#define MPI2_HARD_RESET_PCIE_FIRST_READ_DELAY_MICRO_SEC (50000)
......@@ -329,7 +354,8 @@ typedef struct _MPI2_DEFAULT_REQUEST_DESCRIPTOR {
*pMpi2DefaultRequestDescriptor_t;
/*defines for the RequestFlags field */
#define MPI2_REQ_DESCRIPT_FLAGS_TYPE_MASK (0x0E)
#define MPI2_REQ_DESCRIPT_FLAGS_TYPE_MASK (0x1E)
#define MPI2_REQ_DESCRIPT_FLAGS_TYPE_RSHIFT (1)
#define MPI2_REQ_DESCRIPT_FLAGS_SCSI_IO (0x00)
#define MPI2_REQ_DESCRIPT_FLAGS_SCSI_TARGET (0x02)
#define MPI2_REQ_DESCRIPT_FLAGS_HIGH_PRIORITY (0x06)
......@@ -408,6 +434,33 @@ typedef union _MPI2_REQUEST_DESCRIPTOR_UNION {
Mpi2RequestDescriptorUnion_t,
*pMpi2RequestDescriptorUnion_t;
/*Atomic Request Descriptors */
/*
* All Atomic Request Descriptors have the same format, so the following
* structure is used for all Atomic Request Descriptors:
* Atomic Default Request Descriptor
* Atomic High Priority Request Descriptor
* Atomic SCSI IO Request Descriptor
* Atomic SCSI Target Request Descriptor
* Atomic RAID Accelerator Request Descriptor
* Atomic Fast Path SCSI IO Request Descriptor
*/
/*Atomic Request Descriptor */
typedef struct _MPI26_ATOMIC_REQUEST_DESCRIPTOR {
U8 RequestFlags; /* 0x00 */
U8 MSIxIndex; /* 0x01 */
U16 SMID; /* 0x02 */
} MPI26_ATOMIC_REQUEST_DESCRIPTOR,
*PTR_MPI26_ATOMIC_REQUEST_DESCRIPTOR,
Mpi26AtomicRequestDescriptor_t,
*pMpi26AtomicRequestDescriptor_t;
/*for the RequestFlags field, use the same
*defines as MPI2_DEFAULT_REQUEST_DESCRIPTOR
*/
/*Reply Descriptors */
/*Default Reply Descriptor */
......@@ -548,6 +601,7 @@ typedef union _MPI2_REPLY_DESCRIPTORS_UNION {
#define MPI2_FUNCTION_SCSI_ENCLOSURE_PROCESSOR (0x18)
#define MPI2_FUNCTION_SMP_PASSTHROUGH (0x1A)
#define MPI2_FUNCTION_SAS_IO_UNIT_CONTROL (0x1B)
#define MPI2_FUNCTION_IO_UNIT_CONTROL (0x1B)
#define MPI2_FUNCTION_SATA_PASSTHROUGH (0x1C)
#define MPI2_FUNCTION_DIAG_BUFFER_POST (0x1D)
#define MPI2_FUNCTION_DIAG_RELEASE (0x1E)
......@@ -587,6 +641,7 @@ typedef union _MPI2_REPLY_DESCRIPTORS_UNION {
#define MPI2_IOCSTATUS_INVALID_FIELD (0x0007)
#define MPI2_IOCSTATUS_INVALID_STATE (0x0008)
#define MPI2_IOCSTATUS_OP_STATE_NOT_SUPPORTED (0x0009)
#define MPI2_IOCSTATUS_INSUFFICIENT_POWER (0x000A)
/****************************************************************************
* Config IOCStatus values
......@@ -1045,7 +1100,7 @@ typedef union _MPI2_IEEE_SGE_CHAIN_UNION {
Mpi2IeeeSgeChainUnion_t,
*pMpi2IeeeSgeChainUnion_t;
/*MPI25_IEEE_SGE_CHAIN64 is for MPI v2.5 products only */
/*MPI25_IEEE_SGE_CHAIN64 is for MPI v2.5 and later */
typedef struct _MPI25_IEEE_SGE_CHAIN64 {
U64 Address;
U32 Length;
......@@ -1098,6 +1153,11 @@ typedef union _MPI25_SGE_IO_UNION {
#define MPI2_IEEE_SGE_FLAGS_SIMPLE_ELEMENT (0x00)
#define MPI2_IEEE_SGE_FLAGS_CHAIN_ELEMENT (0x80)
/*Next Segment Format */
#define MPI26_IEEE_SGE_FLAGS_NSF_MASK (0x1C)
#define MPI26_IEEE_SGE_FLAGS_NSF_MPI_IEEE (0x00)
/*Data Location Address Space */
#define MPI2_IEEE_SGE_FLAGS_ADDR_MASK (0x03)
......@@ -1108,6 +1168,7 @@ typedef union _MPI25_SGE_IO_UNION {
#define MPI2_IEEE_SGE_FLAGS_SYSTEMPLBPCI_ADDR (0x03)
#define MPI2_IEEE_SGE_FLAGS_SYSTEMPLBCPI_ADDR \
(MPI2_IEEE_SGE_FLAGS_SYSTEMPLBPCI_ADDR)
#define MPI26_IEEE_SGE_FLAGS_IOCCTL_ADDR (0x02)
/****************************************************************************
* IEEE SGE operation Macros
......@@ -1166,6 +1227,7 @@ typedef union _MPI2_SGE_IO_UNION {
#define MPI2_SGLFLAGS_SYSTEM_ADDRESS_SPACE (0x00)
#define MPI2_SGLFLAGS_IOCDDR_ADDRESS_SPACE (0x04)
#define MPI2_SGLFLAGS_IOCPLB_ADDRESS_SPACE (0x08)
#define MPI26_SGLFLAGS_IOCPLB_ADDRESS_SPACE (0x08)
#define MPI2_SGLFLAGS_IOCPLBNTA_ADDRESS_SPACE (0x0C)
/*values for SGL Type subfield */
#define MPI2_SGLFLAGS_SGL_TYPE_MASK (0x03)
......
/*
* Copyright (c) 2000-2014 LSI Corporation.
* Copyright 2000-2015 Avago Technologies. All rights reserved.
*
*
* Name: mpi2_cnfg.h
* Title: MPI Configuration messages and pages
* Creation Date: November 10, 2006
*
* mpi2_cnfg.h Version: 02.00.29
* mpi2_cnfg.h Version: 02.00.31
*
* NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25
* prefix are for use only on MPI v2.5 products, and must not be used
......@@ -178,7 +178,12 @@
* 01-08-14 02.00.28 Added more defines for the BiosOptions field of
* MPI2_CONFIG_PAGE_BIOS_1.
* 06-13-14 02.00.29 Added SSUTimeout field to MPI2_CONFIG_PAGE_BIOS_1, and
* more defines for the BiosOptions field..
* more defines for the BiosOptions field.
* 11-18-14 02.00.30 Updated copyright information.
* Added MPI2_BIOSPAGE1_OPTIONS_ADVANCED_CONFIG.
* Added AdapterOrderAux fields to BIOS Page 3.
* 03-xx-15 02.00.31 Updated for MPI v2.6.
* Added new SAS Phy Event codes
* --------------------------------------------------------------------------
*/
......@@ -355,7 +360,6 @@ typedef union _MPI2_CONFIG_EXT_PAGE_HEADER_UNION {
#define MPI2_ETHERNET_PGAD_IF_NUMBER_MASK (0x000000FF)
/****************************************************************************
* Configuration messages
****************************************************************************/
......@@ -457,8 +461,17 @@ typedef struct _MPI2_CONFIG_REPLY {
#define MPI25_MFGPAGE_DEVID_SAS3108_5 (0x0094)
#define MPI25_MFGPAGE_DEVID_SAS3108_6 (0x0095)
/* MPI v2.6 SAS Products */
#define MPI26_MFGPAGE_DEVID_SAS3216 (0x00C9)
#define MPI26_MFGPAGE_DEVID_SAS3224 (0x00C4)
#define MPI26_MFGPAGE_DEVID_SAS3316_1 (0x00C5)
#define MPI26_MFGPAGE_DEVID_SAS3316_2 (0x00C6)
#define MPI26_MFGPAGE_DEVID_SAS3316_3 (0x00C7)
#define MPI26_MFGPAGE_DEVID_SAS3316_4 (0x00C8)
#define MPI26_MFGPAGE_DEVID_SAS3324_1 (0x00C0)
#define MPI26_MFGPAGE_DEVID_SAS3324_2 (0x00C1)
#define MPI26_MFGPAGE_DEVID_SAS3324_3 (0x00C2)
#define MPI26_MFGPAGE_DEVID_SAS3324_4 (0x00C3)
/*Manufacturing Page 0 */
......@@ -941,8 +954,8 @@ typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_7 {
U8
BoardTemperatureUnits; /*0x16 */
U8 Reserved3; /*0x17 */
U32 Reserved4; /* 0x18 */
U32 Reserved5; /* 0x1C */
U32 BoardPowerRequirement; /*0x18 */
U32 PCISlotPowerAllocation; /*0x1C */
U32 Reserved6; /* 0x20 */
U32 Reserved7; /* 0x24 */
} MPI2_CONFIG_PAGE_IO_UNIT_7,
......@@ -1151,6 +1164,62 @@ typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_10 {
#define MPI2_IOUNITPAGE10_PAGEVERSION (0x01)
/* IO Unit Page 11 (for MPI v2.6 and later) */
typedef struct _MPI26_IOUNIT11_SPINUP_GROUP {
U8 MaxTargetSpinup; /* 0x00 */
U8 SpinupDelay; /* 0x01 */
U8 SpinupFlags; /* 0x02 */
U8 Reserved1; /* 0x03 */
} MPI26_IOUNIT11_SPINUP_GROUP,
*PTR_MPI26_IOUNIT11_SPINUP_GROUP,
Mpi26IOUnit11SpinupGroup_t,
*pMpi26IOUnit11SpinupGroup_t;
/* defines for IO Unit Page 11 SpinupFlags */
#define MPI26_IOUNITPAGE11_SPINUP_DISABLE_FLAG (0x01)
/*
* Host code (drivers, BIOS, utilities, etc.) should leave this define set to
* four and check the value returned for NumPhys at runtime.
*/
#ifndef MPI26_IOUNITPAGE11_PHY_MAX
#define MPI26_IOUNITPAGE11_PHY_MAX (4)
#endif
typedef struct _MPI26_CONFIG_PAGE_IO_UNIT_11 {
MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
U32 Reserved1; /*0x04 */
MPI26_IOUNIT11_SPINUP_GROUP SpinupGroupParameters[4]; /*0x08 */
U32 Reserved2; /*0x18 */
U32 Reserved3; /*0x1C */
U32 Reserved4; /*0x20 */
U8 BootDeviceWaitTime; /*0x24 */
U8 Reserved5; /*0x25 */
U16 Reserved6; /*0x26 */
U8 NumPhys; /*0x28 */
U8 PEInitialSpinupDelay; /*0x29 */
U8 PEReplyDelay; /*0x2A */
U8 Flags; /*0x2B */
U8 PHY[MPI26_IOUNITPAGE11_PHY_MAX];/*0x2C */
} MPI26_CONFIG_PAGE_IO_UNIT_11,
*PTR_MPI26_CONFIG_PAGE_IO_UNIT_11,
Mpi26IOUnitPage11_t,
*pMpi26IOUnitPage11_t;
#define MPI26_IOUNITPAGE11_PAGEVERSION (0x00)
/* defines for Flags field */
#define MPI26_IOUNITPAGE11_FLAGS_AUTO_PORTENABLE (0x01)
/* defines for PHY field */
#define MPI26_IOUNITPAGE11_PHY_SPINUP_GROUP_MASK (0x03)
/****************************************************************************
* IOC Config Pages
......@@ -1343,6 +1412,9 @@ typedef struct _MPI2_CONFIG_PAGE_BIOS_1 {
#define MPI2_BIOSPAGE1_PAGEVERSION (0x07)
/*values for BIOS Page 1 BiosOptions field */
#define MPI2_BIOSPAGE1_OPTIONS_ADVANCED_CONFIG (0x00004000)
#define MPI2_BIOSPAGE1_OPTIONS_PNS_MASK (0x00003800)
#define MPI2_BIOSPAGE1_OPTIONS_PNS_MASK (0x00003800)
#define MPI2_BIOSPAGE1_OPTIONS_PNS_PBDHL (0x00000000)
#define MPI2_BIOSPAGE1_OPTIONS_PNS_ENCSLOSURE (0x00000800)
......@@ -1492,6 +1564,8 @@ typedef struct _MPI2_CONFIG_PAGE_BIOS_2 {
/*BIOS Page 3 */
#define MPI2_BIOSPAGE3_NUM_ADAPTER (4)
typedef struct _MPI2_ADAPTER_INFO {
U8 PciBusNumber; /*0x00 */
U8 PciDeviceAndFunctionNumber; /*0x01 */
......@@ -1502,17 +1576,26 @@ typedef struct _MPI2_ADAPTER_INFO {
#define MPI2_ADAPTER_INFO_FLAGS_EMBEDDED (0x0001)
#define MPI2_ADAPTER_INFO_FLAGS_INIT_STATUS (0x0002)
typedef struct _MPI2_ADAPTER_ORDER_AUX {
U64 WWID; /* 0x00 */
U32 Reserved1; /* 0x08 */
U32 Reserved2; /* 0x0C */
} MPI2_ADAPTER_ORDER_AUX, *PTR_MPI2_ADAPTER_ORDER_AUX,
Mpi2AdapterOrderAux_t, *pMpi2AdapterOrderAux_t;
typedef struct _MPI2_CONFIG_PAGE_BIOS_3 {
MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
U32 GlobalFlags; /*0x04 */
U32 BiosVersion; /*0x08 */
MPI2_ADAPTER_INFO AdapterOrder[4]; /*0x0C */
MPI2_ADAPTER_INFO AdapterOrder[MPI2_BIOSPAGE3_NUM_ADAPTER];
U32 Reserved1; /*0x1C */
MPI2_ADAPTER_ORDER_AUX AdapterOrderAux[MPI2_BIOSPAGE3_NUM_ADAPTER];
} MPI2_CONFIG_PAGE_BIOS_3,
*PTR_MPI2_CONFIG_PAGE_BIOS_3,
Mpi2BiosPage3_t, *pMpi2BiosPage3_t;
#define MPI2_BIOSPAGE3_PAGEVERSION (0x00)
#define MPI2_BIOSPAGE3_PAGEVERSION (0x01)
/*values for BIOS Page 3 GlobalFlags */
#define MPI2_BIOSPAGE3_FLAGS_PAUSE_ON_ERROR (0x00000002)
......@@ -2006,6 +2089,8 @@ typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_0 {
#define MPI2_SASIOUNIT0_PORTFLAGS_AUTO_PORT_CONFIG (0x01)
/*values for SAS IO Unit Page 0 PhyFlags */
#define MPI2_SASIOUNIT0_PHYFLAGS_INIT_PERSIST_CONNECT (0x40)
#define MPI2_SASIOUNIT0_PHYFLAGS_TARG_PERSIST_CONNECT (0x20)
#define MPI2_SASIOUNIT0_PHYFLAGS_ZONING_ENABLED (0x10)
#define MPI2_SASIOUNIT0_PHYFLAGS_PHY_DISABLED (0x08)
......@@ -2108,6 +2193,7 @@ typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_1 {
#define MPI2_SASIOUNIT1_CONTROL_CLEAR_AFFILIATION (0x0001)
/*values for SAS IO Unit Page 1 AdditionalControlFlags */
#define MPI2_SASIOUNIT1_ACONTROL_DA_PERSIST_CONNECT (0x0100)
#define MPI2_SASIOUNIT1_ACONTROL_MULTI_PORT_DOMAIN_ILLEGAL (0x0080)
#define MPI2_SASIOUNIT1_ACONTROL_SATA_ASYNCHROUNOUS_NOTIFICATION (0x0040)
#define MPI2_SASIOUNIT1_ACONTROL_INVALID_TOPOLOGY_CORRECTION (0x0020)
......@@ -2125,6 +2211,8 @@ typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_1 {
#define MPI2_SASIOUNIT1_PORT_FLAGS_AUTO_PORT_CONFIG (0x01)
/*values for SAS IO Unit Page 1 PhyFlags */
#define MPI2_SASIOUNIT1_PHYFLAGS_INIT_PERSIST_CONNECT (0x40)
#define MPI2_SASIOUNIT1_PHYFLAGS_TARG_PERSIST_CONNECT (0x20)
#define MPI2_SASIOUNIT1_PHYFLAGS_ZONING_ENABLE (0x10)
#define MPI2_SASIOUNIT1_PHYFLAGS_PHY_DISABLE (0x08)
......@@ -2144,7 +2232,7 @@ typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_1 {
*SAS IO Unit Page 1 ControllerPhyDeviceInfo values */
/*SAS IO Unit Page 4 */
/*SAS IO Unit Page 4 (for MPI v2.5 and earlier) */
typedef struct _MPI2_SAS_IOUNIT4_SPINUP_GROUP {
U8 MaxTargetSpinup; /*0x00 */
......@@ -2715,6 +2803,7 @@ typedef struct _MPI2_CONFIG_PAGE_SAS_DEV_0 {
#define MPI2_SAS_DEVICE0_FLAGS_SATA_NCQ_SUPPORTED (0x0020)
#define MPI2_SAS_DEVICE0_FLAGS_SATA_FUA_SUPPORTED (0x0010)
#define MPI2_SAS_DEVICE0_FLAGS_PORT_SELECTOR_ATTACH (0x0008)
#define MPI2_SAS_DEVICE0_FLAGS_PERSIST_CAPABLE (0x0004)
#define MPI2_SAS_DEVICE0_FLAGS_ENCL_LEVEL_VALID (0x0002)
#define MPI2_SAS_DEVICE0_FLAGS_DEVICE_PRESENT (0x0001)
......@@ -2922,6 +3011,19 @@ typedef struct _MPI2_SASPHY3_PHY_EVENT_CONFIG {
#define MPI2_SASPHY3_EVENT_CODE_MISALIGNED_MUX_PRIMITIVE (0xD1)
#define MPI2_SASPHY3_EVENT_CODE_RX_AIP (0xD2)
/*Following codes are product specific and in MPI v2.6 and later */
#define MPI2_SASPHY3_EVENT_CODE_LCARB_WAIT_TIME (0xD3)
#define MPI2_SASPHY3_EVENT_CODE_RCVD_CONN_RESP_WAIT_TIME (0xD4)
#define MPI2_SASPHY3_EVENT_CODE_LCCONN_TIME (0xD5)
#define MPI2_SASPHY3_EVENT_CODE_SSP_TX_START_TRANSMIT (0xD6)
#define MPI2_SASPHY3_EVENT_CODE_SATA_TX_START (0xD7)
#define MPI2_SASPHY3_EVENT_CODE_SMP_TX_START_TRANSMT (0xD8)
#define MPI2_SASPHY3_EVENT_CODE_TX_SMP_BREAK_CONN (0xD9)
#define MPI2_SASPHY3_EVENT_CODE_SSP_RX_START_RECEIVE (0xDA)
#define MPI2_SASPHY3_EVENT_CODE_SATA_RX_START_RECEIVE (0xDB)
#define MPI2_SASPHY3_EVENT_CODE_SMP_RX_START_RECEIVE (0xDC)
/*values for the CounterType field */
#define MPI2_SASPHY3_COUNTER_TYPE_WRAPPING (0x00)
#define MPI2_SASPHY3_COUNTER_TYPE_SATURATING (0x01)
......
/*
* Copyright (c) 2000-2014 LSI Corporation.
* Copyright 2000-2015 Avago Technologies. All rights reserved.
*
*
* Name: mpi2_init.h
* Title: MPI SCSI initiator mode messages and structures
* Creation Date: June 23, 2006
*
* mpi2_init.h Version: 02.00.15
* mpi2_init.h Version: 02.00.17
*
* NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25
* prefix are for use only on MPI v2.5 products, and must not be used
......@@ -46,6 +46,10 @@
* 07-10-12 02.00.14 Added MPI2_SCSIIO_CONTROL_SHIFT_DATADIRECTION.
* 04-09-13 02.00.15 Added SCSIStatusQualifier field to MPI2_SCSI_IO_REPLY,
* replacing the Reserved4 field.
* 11-18-14 02.00.16 Updated copyright information.
* 03-xx-15 02.00.17 Updated for MPI v2.6.
* Added MPI2_SEP_REQ_SLOTSTATUS_DEV_OFF and
* MPI2_SEP_REPLY_SLOTSTATUS_DEV_OFF.
* --------------------------------------------------------------------------
*/
......@@ -128,6 +132,7 @@ typedef struct _MPI2_SCSI_IO_REQUEST {
#define MPI2_SCSIIO_MSGFLAGS_IOCDDR_SENSE_ADDR (0x04)
#define MPI2_SCSIIO_MSGFLAGS_IOCPLB_SENSE_ADDR (0x08)
#define MPI2_SCSIIO_MSGFLAGS_IOCPLBNTA_SENSE_ADDR (0x0C)
#define MPI26_SCSIIO_MSGFLAGS_IOCCTL_SENSE_ADDR (0x08)
/*SCSI IO SGLFlags bits */
......@@ -228,7 +233,7 @@ typedef union _MPI25_SCSI_IO_CDB_UNION {
} MPI25_SCSI_IO_CDB_UNION, *PTR_MPI25_SCSI_IO_CDB_UNION,
Mpi25ScsiIoCdb_t, *pMpi25ScsiIoCdb_t;
/*MPI v2.5 SCSI IO Request Message */
/*MPI v2.5/2.6 SCSI IO Request Message */
typedef struct _MPI25_SCSI_IO_REQUEST {
U16 DevHandle; /*0x00 */
U8 ChainOffset; /*0x02 */
......@@ -306,8 +311,10 @@ typedef struct _MPI25_SCSI_IO_REQUEST {
#define MPI25_SCSIIO_IOFLAGS_NORMAL_PATH (0x0000)
#define MPI25_SCSIIO_IOFLAGS_FAST_PATH (0x4000)
#define MPI26_SCSIIO_IOFLAGS_ESCAPE_PASSTHROUGH (0x2000)
#define MPI25_SCSIIO_IOFLAGS_LARGE_CDB (0x1000)
#define MPI25_SCSIIO_IOFLAGS_BIDIRECTIONAL (0x0800)
#define MPI26_SCSIIO_IOFLAGS_PORT_REQUEST (0x0400)
#define MPI25_SCSIIO_IOFLAGS_CDBLENGTH_MASK (0x01FF)
/*MPI v2.5 defines for the EEDPFlags bits */
......@@ -512,6 +519,7 @@ typedef struct _MPI2_SEP_REQUEST {
#define MPI2_SEP_REQ_FLAGS_ENCLOSURE_SLOT_ADDRESS (0x01)
/*SlotStatus defines */
#define MPI2_SEP_REQ_SLOTSTATUS_DEV_OFF (0x00080000)
#define MPI2_SEP_REQ_SLOTSTATUS_REQUEST_REMOVE (0x00040000)
#define MPI2_SEP_REQ_SLOTSTATUS_IDENTIFY_REQUEST (0x00020000)
#define MPI2_SEP_REQ_SLOTSTATUS_REBUILD_STOPPED (0x00000200)
......@@ -547,6 +555,7 @@ typedef struct _MPI2_SEP_REPLY {
Mpi2SepReply_t, *pMpi2SepReply_t;
/*SlotStatus defines */
#define MPI2_SEP_REPLY_SLOTSTATUS_DEV_OFF (0x00080000)
#define MPI2_SEP_REPLY_SLOTSTATUS_REMOVE_READY (0x00040000)
#define MPI2_SEP_REPLY_SLOTSTATUS_IDENTIFY_REQUEST (0x00020000)
#define MPI2_SEP_REPLY_SLOTSTATUS_REBUILD_STOPPED (0x00000200)
......
/*
* Copyright (c) 2000-2014 LSI Corporation.
* Copyright 2000-2015 Avago Technologies. All rights reserved.
*
*
* Name: mpi2_ioc.h
* Title: MPI IOC, Port, Event, FW Download, and FW Upload messages
* Creation Date: October 11, 2006
*
* mpi2_ioc.h Version: 02.00.24
* mpi2_ioc.h Version: 02.00.26
*
* NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25
* prefix are for use only on MPI v2.5 products, and must not be used
......@@ -133,6 +133,10 @@
* Added MPI2_FW_DOWNLOAD_ITYPE_PUBLIC_KEY.
* Added Encrypted Hash Extended Image.
* 12-05-13 02.00.24 Added MPI25_HASH_IMAGE_TYPE_BIOS.
* 11-18-14 02.00.25 Updated copyright information.
* 03-xx-15 02.00.26 Added MPI26_FW_HEADER_PID_FAMILY_3324_SAS and
* MPI26_FW_HEADER_PID_FAMILY_3516_SAS.
* Added MPI26_CTRL_OP_SHUTDOWN.
* --------------------------------------------------------------------------
*/
......@@ -165,7 +169,7 @@ typedef struct _MPI2_IOC_INIT_REQUEST {
U16 HeaderVersion; /*0x0E */
U32 Reserved5; /*0x10 */
U16 Reserved6; /*0x14 */
U8 Reserved7; /*0x16 */
U8 HostPageSize; /*0x16 */
U8 HostMSIxVectors; /*0x17 */
U16 Reserved8; /*0x18 */
U16 SystemRequestFrameSize; /*0x1A */
......@@ -289,7 +293,8 @@ typedef struct _MPI2_IOC_FACTS_REPLY {
U16 MaxDevHandle; /*0x38 */
U16 MaxPersistentEntries; /*0x3A */
U16 MinDevHandle; /*0x3C */
U16 Reserved4; /*0x3E */
U8 CurrentHostPageSize; /* 0x3E */
U8 Reserved4; /* 0x3F */
} MPI2_IOC_FACTS_REPLY, *PTR_MPI2_IOC_FACTS_REPLY,
Mpi2IOCFactsReply_t, *pMpi2IOCFactsReply_t;
......@@ -326,6 +331,7 @@ typedef struct _MPI2_IOC_FACTS_REPLY {
/*ProductID field uses MPI2_FW_HEADER_PID_ */
/*IOCCapabilities */
#define MPI26_IOCFACTS_CAPABILITY_ATOMIC_REQ (0x00080000)
#define MPI2_IOCFACTS_CAPABILITY_RDPQ_ARRAY_CAPABLE (0x00040000)
#define MPI25_IOCFACTS_CAPABILITY_FAST_PATH_CAPABLE (0x00020000)
#define MPI2_IOCFACTS_CAPABILITY_HOST_BASED_DISCOVERY (0x00010000)
......@@ -343,8 +349,8 @@ typedef struct _MPI2_IOC_FACTS_REPLY {
#define MPI2_IOCFACTS_CAPABILITY_TASK_SET_FULL_HANDLING (0x00000004)
/*ProtocolFlags */
#define MPI2_IOCFACTS_PROTOCOL_SCSI_TARGET (0x0001)
#define MPI2_IOCFACTS_PROTOCOL_SCSI_INITIATOR (0x0002)
#define MPI2_IOCFACTS_PROTOCOL_SCSI_TARGET (0x0001)
/****************************************************************************
* PortFacts message
......@@ -1247,6 +1253,7 @@ typedef struct _MPI2_FW_UPLOAD_REQUEST {
#define MPI2_FW_UPLOAD_ITYPE_MEGARAID (0x09)
#define MPI2_FW_UPLOAD_ITYPE_COMPLETE (0x0A)
#define MPI2_FW_UPLOAD_ITYPE_COMMON_BOOT_BLOCK (0x0B)
#define MPI2_FW_UPLOAD_ITYPE_CBB_BACKUP (0x0D)
/*MPI v2.0 FWUpload TransactionContext Element */
typedef struct _MPI2_FW_UPLOAD_TCSGE {
......@@ -1328,7 +1335,7 @@ typedef struct _MPI2_FW_IMAGE_HEADER {
U32 Reserved54; /*0x54 */
U32 Reserved58; /*0x58 */
U32 Reserved5C; /*0x5C */
U32 Reserved60; /*0x60 */
U32 BootFlags; /*0x60 */
U32 FirmwareVersionNameWhat; /*0x64 */
U8 FirmwareVersionName[32]; /*0x68 */
U32 VendorNameWhat; /*0x88 */
......@@ -1354,18 +1361,22 @@ typedef struct _MPI2_FW_IMAGE_HEADER {
#define MPI2_FW_HEADER_SIGNATURE_OFFSET (0x00)
#define MPI2_FW_HEADER_SIGNATURE_MASK (0xFF000000)
#define MPI2_FW_HEADER_SIGNATURE (0xEA000000)
#define MPI26_FW_HEADER_SIGNATURE (0xEB000000)
/*Signature0 field */
#define MPI2_FW_HEADER_SIGNATURE0_OFFSET (0x04)
#define MPI2_FW_HEADER_SIGNATURE0 (0x5AFAA55A)
#define MPI26_FW_HEADER_SIGNATURE0 (0x5AEAA55A)
/*Signature1 field */
#define MPI2_FW_HEADER_SIGNATURE1_OFFSET (0x08)
#define MPI2_FW_HEADER_SIGNATURE1 (0xA55AFAA5)
#define MPI26_FW_HEADER_SIGNATURE1 (0xA55AEAA5)
/*Signature2 field */
#define MPI2_FW_HEADER_SIGNATURE2_OFFSET (0x0C)
#define MPI2_FW_HEADER_SIGNATURE2 (0x5AA55AFA)
#define MPI26_FW_HEADER_SIGNATURE2 (0x5AA55AEA)
/*defines for using the ProductID field */
#define MPI2_FW_HEADER_PID_TYPE_MASK (0xF000)
......@@ -1381,6 +1392,8 @@ typedef struct _MPI2_FW_IMAGE_HEADER {
#define MPI2_FW_HEADER_PID_FAMILY_2108_SAS (0x0013)
#define MPI2_FW_HEADER_PID_FAMILY_2208_SAS (0x0014)
#define MPI25_FW_HEADER_PID_FAMILY_3108_SAS (0x0021)
#define MPI26_FW_HEADER_PID_FAMILY_3324_SAS (0x0028)
#define MPI26_FW_HEADER_PID_FAMILY_3516_SAS (0x0031)
/*use MPI2_IOCFACTS_PROTOCOL_ defines for ProtocolFlags field */
......@@ -1388,6 +1401,7 @@ typedef struct _MPI2_FW_IMAGE_HEADER {
#define MPI2_FW_HEADER_IMAGESIZE_OFFSET (0x2C)
#define MPI2_FW_HEADER_NEXTIMAGE_OFFSET (0x30)
#define MPI26_FW_HEADER_BOOTFLAGS_OFFSET (0x60)
#define MPI2_FW_HEADER_VERNMHWAT_OFFSET (0x64)
#define MPI2_FW_HEADER_WHAT_SIGNATURE (0x29232840)
......@@ -1493,7 +1507,9 @@ typedef struct _MPI2_FLASH_LAYOUT_DATA {
#define MPI2_FLASH_REGION_CONFIG_1 (0x07)
#define MPI2_FLASH_REGION_CONFIG_2 (0x08)
#define MPI2_FLASH_REGION_MEGARAID (0x09)
#define MPI2_FLASH_REGION_INIT (0x0A)
#define MPI2_FLASH_REGION_COMMON_BOOT_BLOCK (0x0A)
#define MPI2_FLASH_REGION_INIT (MPI2_FLASH_REGION_COMMON_BOOT_BLOCK)
#define MPI2_FLASH_REGION_CBB_BACKUP (0x0D)
/*ImageRevision */
#define MPI2_FLASH_LAYOUT_IMAGE_REVISION (0x00)
......@@ -1619,7 +1635,6 @@ typedef struct _MPI25_ENCRYPTED_HASH_DATA {
Mpi25EncryptedHashData_t, *pMpi25EncryptedHashData_t;
/****************************************************************************
* PowerManagementControl message
****************************************************************************/
......@@ -1726,4 +1741,90 @@ typedef struct _MPI2_PWR_MGMT_CONTROL_REPLY {
} MPI2_PWR_MGMT_CONTROL_REPLY, *PTR_MPI2_PWR_MGMT_CONTROL_REPLY,
Mpi2PwrMgmtControlReply_t, *pMpi2PwrMgmtControlReply_t;
/****************************************************************************
* IO Unit Control messages (MPI v2.6 and later only.)
****************************************************************************/
/* IO Unit Control Request Message */
typedef struct _MPI26_IOUNIT_CONTROL_REQUEST {
U8 Operation; /* 0x00 */
U8 Reserved1; /* 0x01 */
U8 ChainOffset; /* 0x02 */
U8 Function; /* 0x03 */
U16 DevHandle; /* 0x04 */
U8 IOCParameter; /* 0x06 */
U8 MsgFlags; /* 0x07 */
U8 VP_ID; /* 0x08 */
U8 VF_ID; /* 0x09 */
U16 Reserved3; /* 0x0A */
U16 Reserved4; /* 0x0C */
U8 PhyNum; /* 0x0E */
U8 PrimFlags; /* 0x0F */
U32 Primitive; /* 0x10 */
U8 LookupMethod; /* 0x14 */
U8 Reserved5; /* 0x15 */
U16 SlotNumber; /* 0x16 */
U64 LookupAddress; /* 0x18 */
U32 IOCParameterValue; /* 0x20 */
U32 Reserved7; /* 0x24 */
U32 Reserved8; /* 0x28 */
} MPI26_IOUNIT_CONTROL_REQUEST,
*PTR_MPI26_IOUNIT_CONTROL_REQUEST,
Mpi26IoUnitControlRequest_t,
*pMpi26IoUnitControlRequest_t;
/* values for the Operation field */
#define MPI26_CTRL_OP_CLEAR_ALL_PERSISTENT (0x02)
#define MPI26_CTRL_OP_SAS_PHY_LINK_RESET (0x06)
#define MPI26_CTRL_OP_SAS_PHY_HARD_RESET (0x07)
#define MPI26_CTRL_OP_PHY_CLEAR_ERROR_LOG (0x08)
#define MPI26_CTRL_OP_SAS_SEND_PRIMITIVE (0x0A)
#define MPI26_CTRL_OP_FORCE_FULL_DISCOVERY (0x0B)
#define MPI26_CTRL_OP_REMOVE_DEVICE (0x0D)
#define MPI26_CTRL_OP_LOOKUP_MAPPING (0x0E)
#define MPI26_CTRL_OP_SET_IOC_PARAMETER (0x0F)
#define MPI26_CTRL_OP_ENABLE_FP_DEVICE (0x10)
#define MPI26_CTRL_OP_DISABLE_FP_DEVICE (0x11)
#define MPI26_CTRL_OP_ENABLE_FP_ALL (0x12)
#define MPI26_CTRL_OP_DISABLE_FP_ALL (0x13)
#define MPI26_CTRL_OP_DEV_ENABLE_NCQ (0x14)
#define MPI26_CTRL_OP_DEV_DISABLE_NCQ (0x15)
#define MPI26_CTRL_OP_SHUTDOWN (0x16)
#define MPI26_CTRL_OP_DEV_ENABLE_PERSIST_CONNECTION (0x17)
#define MPI26_CTRL_OP_DEV_DISABLE_PERSIST_CONNECTION (0x18)
#define MPI26_CTRL_OP_DEV_CLOSE_PERSIST_CONNECTION (0x19)
#define MPI26_CTRL_OP_PRODUCT_SPECIFIC_MIN (0x80)
/* values for the PrimFlags field */
#define MPI26_CTRL_PRIMFLAGS_SINGLE (0x08)
#define MPI26_CTRL_PRIMFLAGS_TRIPLE (0x02)
#define MPI26_CTRL_PRIMFLAGS_REDUNDANT (0x01)
/* values for the LookupMethod field */
#define MPI26_CTRL_LOOKUP_METHOD_WWID_ADDRESS (0x01)
#define MPI26_CTRL_LOOKUP_METHOD_ENCLOSURE_SLOT (0x02)
#define MPI26_CTRL_LOOKUP_METHOD_SAS_DEVICE_NAME (0x03)
/* IO Unit Control Reply Message */
typedef struct _MPI26_IOUNIT_CONTROL_REPLY {
U8 Operation; /* 0x00 */
U8 Reserved1; /* 0x01 */
U8 MsgLength; /* 0x02 */
U8 Function; /* 0x03 */
U16 DevHandle; /* 0x04 */
U8 IOCParameter; /* 0x06 */
U8 MsgFlags; /* 0x07 */
U8 VP_ID; /* 0x08 */
U8 VF_ID; /* 0x09 */
U16 Reserved3; /* 0x0A */
U16 Reserved4; /* 0x0C */
U16 IOCStatus; /* 0x0E */
U32 IOCLogInfo; /* 0x10 */
} MPI26_IOUNIT_CONTROL_REPLY,
*PTR_MPI26_IOUNIT_CONTROL_REPLY,
Mpi26IoUnitControlReply_t,
*pMpi26IoUnitControlReply_t;
#endif
/*
* Copyright (c) 2000-2014 LSI Corporation.
* Copyright 2000-2014 Avago Technologies. All rights reserved.
*
*
* Name: mpi2_raid.h
* Title: MPI Integrated RAID messages and structures
* Creation Date: April 26, 2007
*
* mpi2_raid.h Version: 02.00.10
* mpi2_raid.h Version: 02.00.11
*
* Version History
* ---------------
......@@ -31,6 +31,7 @@
* 07-26-12 02.00.09 Added ElapsedSeconds field to MPI2_RAID_VOL_INDICATOR.
* Added MPI2_RAID_VOL_FLAGS_ELAPSED_SECONDS_VALID define.
* 04-17-13 02.00.10 Added MPI25_RAID_ACTION_ADATA_ALLOW_PI.
* 11-18-14 02.00.11 Updated copyright information.
* --------------------------------------------------------------------------
*/
......
/*
* Copyright (c) 2000-2014 LSI Corporation.
* Copyright 2000-2015 Avago Technologies. All rights reserved.
*
*
* Name: mpi2_sas.h
* Title: MPI Serial Attached SCSI structures and definitions
* Creation Date: February 9, 2007
*
* mpi2_sas.h Version: 02.00.08
* mpi2_sas.h Version: 02.00.10
*
* NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25
* prefix are for use only on MPI v2.5 products, and must not be used
......@@ -32,6 +32,9 @@
* Passthrough Request message.
* 08-19-13 02.00.08 Made MPI2_SAS_OP_TRANSMIT_PORT_SELECT_SIGNAL obsolete
* for anything newer than MPI v2.0.
* 11-18-14 02.00.09 Updated copyright information.
* 03-xx-145 02.00.10 Updated for MPI v2.6.
* Added MPI2_SATA_PT_REQ_PT_FLAGS_FPDMA.
* --------------------------------------------------------------------------
*/
......@@ -183,6 +186,7 @@ typedef struct _MPI2_SATA_PASSTHROUGH_REQUEST {
/*values for PassthroughFlags field */
#define MPI2_SATA_PT_REQ_PT_FLAGS_EXECUTE_DIAG (0x0100)
#define MPI2_SATA_PT_REQ_PT_FLAGS_FPDMA (0x0040)
#define MPI2_SATA_PT_REQ_PT_FLAGS_DMA (0x0020)
#define MPI2_SATA_PT_REQ_PT_FLAGS_PIO (0x0010)
#define MPI2_SATA_PT_REQ_PT_FLAGS_UNSPECIFIED_VU (0x0004)
......@@ -216,6 +220,8 @@ typedef struct _MPI2_SATA_PASSTHROUGH_REPLY {
/****************************************************************************
* SAS IO Unit Control messages
* (MPI v2.5 and earlier only.
* Replaced by IO Unit Control messages in MPI v2.6 and later.)
****************************************************************************/
/*SAS IO Unit Control Request Message */
......
/*
* Copyright (c) 2000-2014 LSI Corporation.
* Copyright 2000-2014 Avago Technologies. All rights reserved.
*
*
* Name: mpi2_tool.h
* Title: MPI diagnostic tool structures and definitions
* Creation Date: March 26, 2007
*
* mpi2_tool.h Version: 02.00.12
* mpi2_tool.h Version: 02.00.13
*
* Version History
* ---------------
......@@ -34,6 +34,7 @@
* it uses MPI Chain SGE as well as MPI Simple SGE.
* 08-19-13 02.00.11 Added MPI2_TOOLBOX_TEXT_DISPLAY_TOOL and related info.
* 01-08-14 02.00.12 Added MPI2_TOOLBOX_CLEAN_BIT26_PRODUCT_SPECIFIC.
* 11-18-14 02.00.13 Updated copyright information.
* --------------------------------------------------------------------------
*/
......
/*
* Copyright (c) 2000-2014 LSI Corporation.
* Copyright 2000-2014 Avago Technologies. All rights reserved.
*
*
* Name: mpi2_type.h
* Title: MPI basic type definitions
* Creation Date: August 16, 2006
*
* mpi2_type.h Version: 02.00.00
* mpi2_type.h Version: 02.00.01
*
* Version History
* ---------------
......@@ -14,6 +14,7 @@
* Date Version Description
* -------- -------- ------------------------------------------------------
* 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A.
* 11-18-14 02.00.01 Updated copyright information.
* --------------------------------------------------------------------------
*/
......
......@@ -395,6 +395,9 @@ _base_sas_ioc_info(struct MPT3SAS_ADAPTER *ioc, MPI2DefaultReply_t *mpi_reply,
case MPI2_IOCSTATUS_INSUFFICIENT_RESOURCES:
desc = "insufficient resources";
break;
case MPI2_IOCSTATUS_INSUFFICIENT_POWER:
desc = "insufficient power";
break;
case MPI2_IOCSTATUS_INVALID_FIELD:
desc = "invalid field";
break;
......@@ -1348,6 +1351,7 @@ _base_build_zero_len_sge_ieee(struct MPT3SAS_ADAPTER *ioc, void *paddr)
u8 sgl_flags = (MPI2_IEEE_SGE_FLAGS_SIMPLE_ELEMENT |
MPI2_IEEE_SGE_FLAGS_SYSTEM_ADDR |
MPI25_IEEE_SGE_FLAGS_END_OF_LIST);
_base_add_sg_single_ieee(paddr, sgl_flags, 0, 0, -1);
}
......@@ -5226,6 +5230,7 @@ mpt3sas_base_attach(struct MPT3SAS_ADAPTER *ioc)
ioc->build_zero_len_sge = &_base_build_zero_len_sge;
break;
case MPI25_VERSION:
case MPI26_VERSION:
/*
* In SAS3.0,
* SCSI_IO, SMP_PASSTHRU, SATA_PASSTHRU, Target Assist, and
......
......@@ -410,7 +410,7 @@ mpt3sas_ctl_event_callback(struct MPT3SAS_ADAPTER *ioc, u8 msix_index,
* @ioc: per adapter object
* @iocpp: The ioc pointer is returned in this.
* @mpi_version: will be MPI2_VERSION for mpt2ctl ioctl device &
* MPI25_VERSION for mpt3ctl ioctl device.
* MPI25_VERSION | MPI26_VERSION for mpt3ctl ioctl device.
*
* Return (-1) means error, else ioc_number.
*/
......@@ -419,6 +419,7 @@ _ctl_verify_adapter(int ioc_number, struct MPT3SAS_ADAPTER **iocpp,
int mpi_version)
{
struct MPT3SAS_ADAPTER *ioc;
int version = 0;
/* global ioc lock to protect controller on list operations */
spin_lock(&gioc_lock);
list_for_each_entry(ioc, &mpt3sas_ioc_list, list) {
......@@ -427,8 +428,21 @@ _ctl_verify_adapter(int ioc_number, struct MPT3SAS_ADAPTER **iocpp,
/* Check whether this ioctl command is from right
* ioctl device or not, if not continue the search.
*/
if (ioc->hba_mpi_version_belonged != mpi_version)
version = ioc->hba_mpi_version_belonged;
/* MPI25_VERSION and MPI26_VERSION uses same ioctl
* device.
*/
if (mpi_version == (MPI25_VERSION | MPI26_VERSION)) {
if ((version == MPI25_VERSION) ||
(version == MPI26_VERSION))
goto out;
else
continue;
} else {
if (version != mpi_version)
continue;
}
out:
spin_unlock(&gioc_lock);
*iocpp = ioc;
return ioc_number;
......@@ -1053,6 +1067,7 @@ _ctl_getiocinfo(struct MPT3SAS_ADAPTER *ioc, void __user *arg)
strcat(karg.driver_version, MPT2SAS_DRIVER_VERSION);
break;
case MPI25_VERSION:
case MPI26_VERSION:
karg.adapter_type = MPT3_IOCTL_INTERFACE_SAS3;
strcat(karg.driver_version, MPT3SAS_DRIVER_VERSION);
break;
......@@ -2203,7 +2218,7 @@ _ctl_compat_mpt_command(struct MPT3SAS_ADAPTER *ioc, unsigned cmd,
* @arg - user space data buffer
* @compat - handles 32 bit applications in 64bit os
* @mpi_version: will be MPI2_VERSION for mpt2ctl ioctl device &
* MPI25_VERSION for mpt3ctl ioctl device.
* MPI25_VERSION | MPI26_VERSION for mpt3ctl ioctl device.
*/
static long
_ctl_ioctl_main(struct file *file, unsigned int cmd, void __user *arg,
......@@ -2341,10 +2356,12 @@ _ctl_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
{
long ret;
/* pass MPI25_VERSION value, to indicate that this ioctl cmd
/* pass MPI25_VERSION | MPI26_VERSION value,
* to indicate that this ioctl cmd
* came from mpt3ctl ioctl device.
*/
ret = _ctl_ioctl_main(file, cmd, (void __user *)arg, 0, MPI25_VERSION);
ret = _ctl_ioctl_main(file, cmd, (void __user *)arg, 0,
MPI25_VERSION | MPI26_VERSION);
return ret;
}
......@@ -2379,7 +2396,8 @@ _ctl_ioctl_compat(struct file *file, unsigned cmd, unsigned long arg)
{
long ret;
ret = _ctl_ioctl_main(file, cmd, (void __user *)arg, 1, MPI25_VERSION);
ret = _ctl_ioctl_main(file, cmd, (void __user *)arg, 1,
MPI25_VERSION | MPI26_VERSION);
return ret;
}
......
......@@ -1589,10 +1589,16 @@ scsih_get_resync(struct device *dev)
percent_complete = 0;
out:
if (ioc->hba_mpi_version_belonged == MPI2_VERSION)
switch (ioc->hba_mpi_version_belonged) {
case MPI2_VERSION:
raid_set_resync(mpt2sas_raid_template, dev, percent_complete);
if (ioc->hba_mpi_version_belonged == MPI25_VERSION)
break;
case MPI25_VERSION:
case MPI26_VERSION:
raid_set_resync(mpt3sas_raid_template, dev, percent_complete);
break;
}
}
/**
......@@ -1650,10 +1656,15 @@ scsih_get_state(struct device *dev)
break;
}
out:
if (ioc->hba_mpi_version_belonged == MPI2_VERSION)
switch (ioc->hba_mpi_version_belonged) {
case MPI2_VERSION:
raid_set_state(mpt2sas_raid_template, dev, state);
if (ioc->hba_mpi_version_belonged == MPI25_VERSION)
break;
case MPI25_VERSION:
case MPI26_VERSION:
raid_set_state(mpt3sas_raid_template, dev, state);
break;
}
}
/**
......@@ -1682,12 +1693,17 @@ _scsih_set_level(struct MPT3SAS_ADAPTER *ioc,
break;
}
if (ioc->hba_mpi_version_belonged == MPI2_VERSION)
switch (ioc->hba_mpi_version_belonged) {
case MPI2_VERSION:
raid_set_level(mpt2sas_raid_template,
&sdev->sdev_gendev, level);
if (ioc->hba_mpi_version_belonged == MPI25_VERSION)
break;
case MPI25_VERSION:
case MPI26_VERSION:
raid_set_level(mpt3sas_raid_template,
&sdev->sdev_gendev, level);
break;
}
}
......@@ -4084,6 +4100,9 @@ _scsih_scsi_ioc_info(struct MPT3SAS_ADAPTER *ioc, struct scsi_cmnd *scmd,
case MPI2_IOCSTATUS_EEDP_APP_TAG_ERROR:
desc_ioc_state = "eedp app tag error";
break;
case MPI2_IOCSTATUS_INSUFFICIENT_POWER:
desc_ioc_state = "insufficient power";
break;
default:
desc_ioc_state = "unknown";
break;
......@@ -4609,6 +4628,7 @@ _scsih_io_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply)
case MPI2_IOCSTATUS_INVALID_STATE:
case MPI2_IOCSTATUS_SCSI_IO_DATA_ERROR:
case MPI2_IOCSTATUS_SCSI_TASK_MGMT_FAILED:
case MPI2_IOCSTATUS_INSUFFICIENT_POWER:
default:
scmd->result = DID_SOFT_ERROR << 16;
break;
......@@ -8391,7 +8411,8 @@ static struct raid_function_template mpt3sas_raid_functions = {
* @pdev: PCI device struct
*
* return MPI2_VERSION for SAS 2.0 HBA devices,
* MPI25_VERSION for SAS 3.0 HBA devices.
* MPI25_VERSION for SAS 3.0 HBA devices, and
* MPI26 VERSION for Cutlass & Invader SAS 3.0 HBA devices
*/
u16
_scsih_determine_hba_mpi_version(struct pci_dev *pdev)
......@@ -8423,6 +8444,17 @@ _scsih_determine_hba_mpi_version(struct pci_dev *pdev)
case MPI25_MFGPAGE_DEVID_SAS3108_5:
case MPI25_MFGPAGE_DEVID_SAS3108_6:
return MPI25_VERSION;
case MPI26_MFGPAGE_DEVID_SAS3216:
case MPI26_MFGPAGE_DEVID_SAS3224:
case MPI26_MFGPAGE_DEVID_SAS3316_1:
case MPI26_MFGPAGE_DEVID_SAS3316_2:
case MPI26_MFGPAGE_DEVID_SAS3316_3:
case MPI26_MFGPAGE_DEVID_SAS3316_4:
case MPI26_MFGPAGE_DEVID_SAS3324_1:
case MPI26_MFGPAGE_DEVID_SAS3324_2:
case MPI26_MFGPAGE_DEVID_SAS3324_3:
case MPI26_MFGPAGE_DEVID_SAS3324_4:
return MPI26_VERSION;
}
return 0;
}
......@@ -8456,7 +8488,8 @@ _scsih_probe(struct pci_dev *pdev, const struct pci_device_id *id)
/* Enumerate only SAS 3.0 HBA's if hbas_to_enumerate is two,
* for other generation HBA's return with -ENODEV
*/
if ((hbas_to_enumerate == 2) && (hba_mpi_version != MPI25_VERSION))
if ((hbas_to_enumerate == 2) && (!(hba_mpi_version == MPI25_VERSION
|| hba_mpi_version == MPI26_VERSION)))
return -ENODEV;
switch (hba_mpi_version) {
......@@ -8478,6 +8511,7 @@ _scsih_probe(struct pci_dev *pdev, const struct pci_device_id *id)
ioc->mfg_pg10_hide_flag = MFG_PAGE10_EXPOSE_ALL_DISKS;
break;
case MPI25_VERSION:
case MPI26_VERSION:
/* Use mpt3sas driver host template for SAS 3.0 HBA's */
shost = scsi_host_alloc(&mpt3sas_driver_template,
sizeof(struct MPT3SAS_ADAPTER));
......@@ -8488,7 +8522,9 @@ _scsih_probe(struct pci_dev *pdev, const struct pci_device_id *id)
ioc->hba_mpi_version_belonged = hba_mpi_version;
ioc->id = mpt3_ids++;
sprintf(ioc->driver_name, "%s", MPT3SAS_DRIVER_NAME);
if (pdev->revision >= SAS3_PCI_DEVICE_C0_REVISION)
if ((ioc->hba_mpi_version_belonged == MPI25_VERSION &&
pdev->revision >= SAS3_PCI_DEVICE_C0_REVISION) ||
(ioc->hba_mpi_version_belonged == MPI26_VERSION))
ioc->msix96_vector = 1;
break;
default:
......@@ -8866,6 +8902,28 @@ static const struct pci_device_id mpt3sas_pci_table[] = {
PCI_ANY_ID, PCI_ANY_ID },
{ MPI2_MFGPAGE_VENDORID_LSI, MPI25_MFGPAGE_DEVID_SAS3108_6,
PCI_ANY_ID, PCI_ANY_ID },
/* Cutlass ~ 3216 and 3224 */
{ MPI2_MFGPAGE_VENDORID_LSI, MPI26_MFGPAGE_DEVID_SAS3216,
PCI_ANY_ID, PCI_ANY_ID },
{ MPI2_MFGPAGE_VENDORID_LSI, MPI26_MFGPAGE_DEVID_SAS3224,
PCI_ANY_ID, PCI_ANY_ID },
/* Intruder ~ 3316 and 3324 */
{ MPI2_MFGPAGE_VENDORID_LSI, MPI26_MFGPAGE_DEVID_SAS3316_1,
PCI_ANY_ID, PCI_ANY_ID },
{ MPI2_MFGPAGE_VENDORID_LSI, MPI26_MFGPAGE_DEVID_SAS3316_2,
PCI_ANY_ID, PCI_ANY_ID },
{ MPI2_MFGPAGE_VENDORID_LSI, MPI26_MFGPAGE_DEVID_SAS3316_3,
PCI_ANY_ID, PCI_ANY_ID },
{ MPI2_MFGPAGE_VENDORID_LSI, MPI26_MFGPAGE_DEVID_SAS3316_4,
PCI_ANY_ID, PCI_ANY_ID },
{ MPI2_MFGPAGE_VENDORID_LSI, MPI26_MFGPAGE_DEVID_SAS3324_1,
PCI_ANY_ID, PCI_ANY_ID },
{ MPI2_MFGPAGE_VENDORID_LSI, MPI26_MFGPAGE_DEVID_SAS3324_2,
PCI_ANY_ID, PCI_ANY_ID },
{ MPI2_MFGPAGE_VENDORID_LSI, MPI26_MFGPAGE_DEVID_SAS3324_3,
PCI_ANY_ID, PCI_ANY_ID },
{ MPI2_MFGPAGE_VENDORID_LSI, MPI26_MFGPAGE_DEVID_SAS3324_4,
PCI_ANY_ID, PCI_ANY_ID },
{0} /* Terminating entry */
};
MODULE_DEVICE_TABLE(pci, mpt3sas_pci_table);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment