arm64: dts: qcom: sm8[12]50-pm8150: Move RESIN to pm8150 dtsi

It's not worth duplicating the same node over and over and over and over again,
so let's keep the common bits in the pm8150 DTSI, making only changing the
status and keycode necessary.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210613124822.124039-1-konrad.dybcio@somainline.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arch/arm64/boot/dts/qcom/pm8150.dtsi

@@ -60,6 +60,15 @@ pon_pwrkey: pwrkey {
 
 				status = "disabled";
 			};
+
+			pon_resin: resin {
+				compatible = "qcom,pm8941-resin";
+				interrupts = <0x0 0x8 0x1 IRQ_TYPE_EDGE_BOTH>;
+				debounce = <15625>;
+				bias-pull-up;
+
+				status = "disabled";
+			};
 		};
 
 		pm8150_temp: temp-alarm@2400 {

arch/arm64/boot/dts/qcom/sm8150-hdk.dts

@@ -362,18 +362,14 @@ &gpu {
 	status = "okay";
 };
 
-&pon {
-	pwrkey {
-		status = "okay";
-	};
+&pon_pwrkey {
+	status = "okay";
+};
 
-	resin {
-		compatible = "qcom,pm8941-resin";
-		interrupts = <0x0 0x8 0x1 IRQ_TYPE_EDGE_BOTH>;
-		debounce = <15625>;
-		bias-pull-up;
-		linux,code = <KEY_VOLUMEDOWN>;
-	};
+&pon_resin {
+	status = "okay";
+
+	linux,code = <KEY_VOLUMEDOWN>;
 };
 
 &qupv3_id_1 {

arch/arm64/boot/dts/qcom/sm8150-mtp.dts

@@ -357,18 +357,14 @@ &gpu {
 	status = "okay";
 };
 
-&pon {
-	pwrkey {
-		status = "okay";
-	};
+&pon_pwrkey {
+	status = "okay";
+};
 
-	resin {
-		compatible = "qcom,pm8941-resin";
-		interrupts = <0x0 0x8 0x1 IRQ_TYPE_EDGE_BOTH>;
-		debounce = <15625>;
-		bias-pull-up;
-		linux,code = <KEY_VOLUMEDOWN>;
-	};
+&pon_resin {
+	status = "okay";
+
+	linux,code = <KEY_VOLUMEDOWN>;
 };
 
 &qupv3_id_1 {

arch/arm64/boot/dts/qcom/sm8250-hdk.dts

@@ -372,22 +372,18 @@ &gpu {
 	status = "okay";
 };
 
-&qupv3_id_1 {
+&pon_pwrkey {
 	status = "okay";
 };
 
-&pon {
-	pwrkey {
-		status = "okay";
-	};
+&pon_resin {
+	status = "okay";
 
-	resin {
-		compatible = "qcom,pm8941-resin";
-		interrupts = <0x0 0x8 0x1 IRQ_TYPE_EDGE_BOTH>;
-		debounce = <15625>;
-		bias-pull-up;
-		linux,code = <KEY_VOLUMEDOWN>;
-	};
+	linux,code = <KEY_VOLUMEDOWN>;
+};
+
+&qupv3_id_1 {
+	status = "okay";
 };
 
 &tlmm {