Commit b13d1f0f authored by Jarkko Nikula's avatar Jarkko Nikula Committed by Chris Ball

mmc: omap: Add erase capability

This patch adds the erase capability to OMAP1/OMAP2420 MMC driver. Idea is
the same than in commit 93caf8e ("omap_hsmmc: add erase capability") that we
disable the data timeout interrupt for erases.
Signed-off-by: default avatarJarkko Nikula <jarkko.nikula@bitmer.com>
Acked-by: default avatarTony Lindgren <tony@atomide.com>
Tested-by: default avatarAaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: default avatarChris Ball <chris@printf.net>
parent a6c668fb
......@@ -26,6 +26,7 @@
#include <linux/omap-dma.h>
#include <linux/mmc/host.h>
#include <linux/mmc/card.h>
#include <linux/mmc/mmc.h>
#include <linux/clk.h>
#include <linux/scatterlist.h>
#include <linux/slab.h>
......@@ -336,6 +337,7 @@ mmc_omap_start_command(struct mmc_omap_host *host, struct mmc_command *cmd)
u32 cmdreg;
u32 resptype;
u32 cmdtype;
u16 irq_mask;
host->cmd = cmd;
......@@ -388,12 +390,14 @@ mmc_omap_start_command(struct mmc_omap_host *host, struct mmc_command *cmd)
OMAP_MMC_WRITE(host, CTO, 200);
OMAP_MMC_WRITE(host, ARGL, cmd->arg & 0xffff);
OMAP_MMC_WRITE(host, ARGH, cmd->arg >> 16);
OMAP_MMC_WRITE(host, IE,
OMAP_MMC_STAT_A_EMPTY | OMAP_MMC_STAT_A_FULL |
irq_mask = OMAP_MMC_STAT_A_EMPTY | OMAP_MMC_STAT_A_FULL |
OMAP_MMC_STAT_CMD_CRC | OMAP_MMC_STAT_CMD_TOUT |
OMAP_MMC_STAT_DATA_CRC | OMAP_MMC_STAT_DATA_TOUT |
OMAP_MMC_STAT_END_OF_CMD | OMAP_MMC_STAT_CARD_ERR |
OMAP_MMC_STAT_END_OF_DATA);
OMAP_MMC_STAT_END_OF_DATA;
if (cmd->opcode == MMC_ERASE)
irq_mask &= ~OMAP_MMC_STAT_DATA_TOUT;
OMAP_MMC_WRITE(host, IE, irq_mask);
OMAP_MMC_WRITE(host, CMD, cmdreg);
}
......@@ -1234,7 +1238,7 @@ static int mmc_omap_new_slot(struct mmc_omap_host *host, int id)
mmc->caps = 0;
if (host->pdata->slots[id].wires >= 4)
mmc->caps |= MMC_CAP_4_BIT_DATA;
mmc->caps |= MMC_CAP_4_BIT_DATA | MMC_CAP_ERASE;
mmc->ops = &mmc_omap_ops;
mmc->f_min = 400000;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment