staging: comedi: addi_apci_1032: remove unnecessary eeprom code

Now that this driver is separate from the "common" addi-data code,
the eeprom does not contain any information required to make this
driver work.

Remove the unneeded initalization of the 's_EeParameters' and the
code that reads the eeprom to fill in the parameters.

Also, since reading the eeprom is not really interesting, remove
the EEPROM subdevice.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/comedi/drivers/addi_apci_1032.c

@@ -4,7 +4,6 @@
 
 #include "addi-data/addi_common.h"
 
-#include "addi-data/addi_eeprom.c"
 #include "addi-data/hwdrv_apci1032.c"
 
 static const struct addi_board apci1032_boardtypes[] = {
@@ -19,23 +18,6 @@ static const struct addi_board apci1032_boardtypes[] = {
 	},
 };
 
-static int i_ADDIDATA_InsnReadEeprom(struct comedi_device *dev,
-				     struct comedi_subdevice *s,
-				     struct comedi_insn *insn,
-				     unsigned int *data)
-{
-	const struct addi_board *this_board = comedi_board(dev);
-	struct addi_private *devpriv = dev->private;
-	unsigned short w_Address = CR_CHAN(insn->chanspec);
-	unsigned short w_Data;
-
-	w_Data = addi_eeprom_readw(devpriv->i_IobaseAmcc,
-		this_board->pc_EepromChip, 2 * w_Address);
-	data[0] = w_Data;
-
-	return insn->n;
-}
-
 static irqreturn_t v_ADDI_Interrupt(int irq, void *d)
 {
 	struct comedi_device *dev = d;
@@ -69,7 +51,6 @@ static int apci1032_attach_pci(struct comedi_device *dev,
 	struct addi_private *devpriv;
 	struct comedi_subdevice *s;
 	int ret, n_subdevices;
-	unsigned int dw_Dummy;
 
 	this_board = addi_find_boardinfo(dev, pcidev);
 	if (!this_board)
@@ -88,23 +69,6 @@ static int apci1032_attach_pci(struct comedi_device *dev,
 
 	dev->iobase = pci_resource_start(pcidev, 2);
 
-	/* Initialize parameters that can be overridden in EEPROM */
-	devpriv->s_EeParameters.i_NbrAiChannel = this_board->i_NbrAiChannel;
-	devpriv->s_EeParameters.i_NbrAoChannel = this_board->i_NbrAoChannel;
-	devpriv->s_EeParameters.i_AiMaxdata = this_board->i_AiMaxdata;
-	devpriv->s_EeParameters.i_AoMaxdata = this_board->i_AoMaxdata;
-	devpriv->s_EeParameters.i_NbrDiChannel = this_board->i_NbrDiChannel;
-	devpriv->s_EeParameters.i_NbrDoChannel = this_board->i_NbrDoChannel;
-	devpriv->s_EeParameters.i_DoMaxdata = this_board->i_DoMaxdata;
-	devpriv->s_EeParameters.i_Dma = this_board->i_Dma;
-	devpriv->s_EeParameters.i_Timer = this_board->i_Timer;
-	devpriv->s_EeParameters.ui_MinAcquisitiontimeNs =
-		this_board->ui_MinAcquisitiontimeNs;
-	devpriv->s_EeParameters.ui_MinDelaytimeNs =
-		this_board->ui_MinDelaytimeNs;
-
-	/* ## */
-
 	if (pcidev->irq > 0) {
 		ret = request_irq(pcidev->irq, v_ADDI_Interrupt, IRQF_SHARED,
 				  dev->board_name, dev);
@@ -112,23 +76,6 @@ static int apci1032_attach_pci(struct comedi_device *dev,
 			dev->irq = pcidev->irq;
 	}
 
-	/*  Read eepeom and fill addi_board Structure */
-
-	if (this_board->i_PCIEeprom) {
-		if (!(strcmp(this_board->pc_EepromChip, "S5920"))) {
-			/*  Set 3 wait stait */
-			if (!(strcmp(dev->board_name, "apci035"))) {
-				outl(0x80808082, devpriv->i_IobaseAmcc + 0x60);
-			} else {
-				outl(0x83838383, devpriv->i_IobaseAmcc + 0x60);
-			}
-			/*  Enable the interrupt for the controller */
-			dw_Dummy = inl(devpriv->i_IobaseAmcc + 0x38);
-			outl(dw_Dummy | 0x2000, devpriv->i_IobaseAmcc + 0x38);
-		}
-		addi_eeprom_read_info(dev, pci_resource_start(pcidev, 0));
-	}
-
 	n_subdevices = 7;
 	ret = comedi_alloc_subdevices(dev, n_subdevices);
 	if (ret)
@@ -168,15 +115,7 @@ static int apci1032_attach_pci(struct comedi_device *dev,
 
 	/* EEPROM */
 	s = &dev->subdevices[6];
-	if (this_board->i_PCIEeprom) {
-		s->type = COMEDI_SUBD_MEMORY;
-		s->subdev_flags = SDF_READABLE | SDF_INTERNAL;
-		s->n_chan = 256;
-		s->maxdata = 0xffff;
-		s->insn_read = i_ADDIDATA_InsnReadEeprom;
-	} else {
 	s->type = COMEDI_SUBD_UNUSED;
-	}
 
 	i_APCI1032_Reset(dev);
 	return 0;