Merge git://git.infradead.org/battery-2.6

* git://git.infradead.org/battery-2.6: (68 commits)
  power_supply: Mark da9052 driver as broken
  power_supply: Drop usage of nowarn variant of sysfs_create_link()
  s3c_adc_battery: Average over more than one adc sample
  power_supply: Add DA9052 battery driver
  isp1704_charger: Fix missing check
  jz4740-battery: Fix signedness bug
  power_supply: Assume mains power by default
  sbs-battery: Fix devicetree match table
  ARM: rx51: Add bq27200 i2c board info
  sbs-battery: Change power supply name
  devicetree-bindings: Propagate bq20z75->sbs rename to dt bindings
  devicetree-bindings: Add vendor entry for Smart Battery Systems
  sbs-battery: Rename internals to new name
  bq20z75: Rename to sbs-battery
  wm97xx_battery: Use DEFINE_MUTEX() for work_lock
  max8997_charger: Remove duplicate module.h
  lp8727_charger: Some minor fixes for the header
  lp8727_charger: Add header file
  power_supply: Convert drivers/power/* to use module_platform_driver()
  power_supply: Add "unknown" in power supply type
  ...

Documentation/devicetree/bindings/power_supply/olpc_battery.txt

+OLPC battery
+~~~~~~~~~~~~
+
+Required properties:
+  - compatible : "olpc,xo1-battery"

Documentation/devicetree/bindings/power_supply/sbs_sbs-battery.txt

+SBS sbs-battery
+~~~~~~~~~~
+
+Required properties :
+ - compatible : "sbs,sbs-battery"
+
+Optional properties :
+ - sbs,i2c-retry-count : The number of times to retry i2c transactions on i2c
+   IO failure.
+ - sbs,poll-retry-count : The number of times to try looking for new status
+   after an external change notification.
+ - sbs,battery-detect-gpios : The gpio which signals battery detection and
+   a flag specifying its polarity.
+
+Example:
+
+	bq20z75@b {
+		compatible = "sbs,sbs-battery";
+		reg = < 0xb >;
+		sbs,i2c-retry-count = <2>;
+		sbs,poll-retry-count = <10>;
+		sbs,battery-detect-gpios = <&gpio-controller 122 1>;
+	}

Documentation/devicetree/bindings/vendor-prefixes.txt

@@ -34,6 +34,7 @@ powervr	Imagination Technologies
 qcom	Qualcomm, Inc.
 ramtron	Ramtron International
 samsung	Samsung Semiconductor
+sbs	Smart Battery System
 schindler	Schindler
 sil	Silicon Image
 simtek

Documentation/power/charger-manager.txt

+Charger Manager
+	(C) 2011 MyungJoo Ham <myungjoo.ham@samsung.com>, GPL
+
+Charger Manager provides in-kernel battery charger management that
+requires temperature monitoring during suspend-to-RAM state
+and where each battery may have multiple chargers attached and the userland
+wants to look at the aggregated information of the multiple chargers.
+
+Charger Manager is a platform_driver with power-supply-class entries.
+An instance of Charger Manager (a platform-device created with Charger-Manager)
+represents an independent battery with chargers. If there are multiple
+batteries with their own chargers acting independently in a system,
+the system may need multiple instances of Charger Manager.
+
+1. Introduction
+===============
+
+Charger Manager supports the following:
+
+* Support for multiple chargers (e.g., a device with USB, AC, and solar panels)
+	A system may have multiple chargers (or power sources) and some of
+	they may be activated at the same time. Each charger may have its
+	own power-supply-class and each power-supply-class can provide
+	different information about the battery status. This framework
+	aggregates charger-related information from multiple sources and
+	shows combined information as a single power-supply-class.
+
+* Support for in suspend-to-RAM polling (with suspend_again callback)
+	While the battery is being charged and the system is in suspend-to-RAM,
+	we may need to monitor the battery health by looking at the ambient or
+	battery temperature. We can accomplish this by waking up the system
+	periodically. However, such a method wakes up devices unncessary for
+	monitoring the battery health and tasks, and user processes that are
+	supposed to be kept suspended. That, in turn, incurs unnecessary power
+	consumption and slow down charging process. Or even, such peak power
+	consumption can stop chargers in the middle of charging
+	(external power input < device power consumption), which not
+	only affects the charging time, but the lifespan of the battery.
+
+	Charger Manager provides a function "cm_suspend_again" that can be
+	used as suspend_again callback of platform_suspend_ops. If the platform
+	requires tasks other than cm_suspend_again, it may implement its own
+	suspend_again callback that calls cm_suspend_again in the middle.
+	Normally, the platform will need to resume and suspend some devices
+	that are used by Charger Manager.
+
+2. Global Charger-Manager Data related with suspend_again
+========================================================
+In order to setup Charger Manager with suspend-again feature
+(in-suspend monitoring), the user should provide charger_global_desc
+with setup_charger_manager(struct charger_global_desc *).
+This charger_global_desc data for in-suspend monitoring is global
+as the name suggests. Thus, the user needs to provide only once even
+if there are multiple batteries. If there are multiple batteries, the
+multiple instances of Charger Manager share the same charger_global_desc
+and it will manage in-suspend monitoring for all instances of Charger Manager.
+
+The user needs to provide all the two entries properly in order to activate
+in-suspend monitoring:
+
+struct charger_global_desc {
+
+char *rtc_name;
+	: The name of rtc (e.g., "rtc0") used to wakeup the system from
+	suspend for Charger Manager. The alarm interrupt (AIE) of the rtc
+	should be able to wake up the system from suspend. Charger Manager
+	saves and restores the alarm value and use the previously-defined
+	alarm if it is going to go off earlier than Charger Manager so that
+	Charger Manager does not interfere with previously-defined alarms.
+
+bool (*rtc_only_wakeup)(void);
+	: This callback should let CM know whether
+	the wakeup-from-suspend is caused only by the alarm of "rtc" in the
+	same struct. If there is any other wakeup source triggered the
+	wakeup, it should return false. If the "rtc" is the only wakeup
+	reason, it should return true.
+};
+
+3. How to setup suspend_again
+=============================
+Charger Manager provides a function "extern bool cm_suspend_again(void)".
+When cm_suspend_again is called, it monitors every battery. The suspend_ops
+callback of the system's platform_suspend_ops can call cm_suspend_again
+function to know whether Charger Manager wants to suspend again or not.
+If there are no other devices or tasks that want to use suspend_again
+feature, the platform_suspend_ops may directly refer to cm_suspend_again
+for its suspend_again callback.
+
+The cm_suspend_again() returns true (meaning "I want to suspend again")
+if the system was woken up by Charger Manager and the polling
+(in-suspend monitoring) results in "normal".
+
+4. Charger-Manager Data (struct charger_desc)
+=============================================
+For each battery charged independently from other batteries (if a series of
+batteries are charged by a single charger, they are counted as one independent
+battery), an instance of Charger Manager is attached to it.
+
+struct charger_desc {
+
+char *psy_name;
+	: The power-supply-class name of the battery. Default is
+	"battery" if psy_name is NULL. Users can access the psy entries
+	at "/sys/class/power_supply/[psy_name]/".
+
+enum polling_modes polling_mode;
+	: CM_POLL_DISABLE: do not poll this battery.
+	  CM_POLL_ALWAYS: always poll this battery.
+	  CM_POLL_EXTERNAL_POWER_ONLY: poll this battery if and only if
+				       an external power source is attached.
+	  CM_POLL_CHARGING_ONLY: poll this battery if and only if the
+				 battery is being charged.
+
+unsigned int fullbatt_uV;
+	: If specified with a non-zero value, Charger Manager assumes
+	that the battery is full (capacity = 100) if the battery is not being
+	charged and the battery voltage is equal to or greater than
+	fullbatt_uV.
+
+unsigned int polling_interval_ms;
+	: Required polling interval in ms. Charger Manager will poll
+	this battery every polling_interval_ms or more frequently.
+
+enum data_source battery_present;
+	CM_FUEL_GAUGE: get battery presence information from fuel gauge.
+	CM_CHARGER_STAT: get battery presence from chargers.
+
+char **psy_charger_stat;
+	: An array ending with NULL that has power-supply-class names of
+	chargers. Each power-supply-class should provide "PRESENT" (if
+	battery_present is "CM_CHARGER_STAT"), "ONLINE" (shows whether an
+	external power source is attached or not), and "STATUS" (shows whether
+	the battery is {"FULL" or not FULL} or {"FULL", "Charging",
+	"Discharging", "NotCharging"}).
+
+int num_charger_regulators;
+struct regulator_bulk_data *charger_regulators;
+	: Regulators representing the chargers in the form for
+	regulator framework's bulk functions.
+
+char *psy_fuel_gauge;
+	: Power-supply-class name of the fuel gauge.
+
+int (*temperature_out_of_range)(int *mC);
+bool measure_battery_temp;
+	: This callback returns 0 if the temperature is safe for charging,
+	a positive number if it is too hot to charge, and a negative number
+	if it is too cold to charge. With the variable mC, the callback returns
+	the temperature in 1/1000 of centigrade.
+	The source of temperature can be battery or ambient one according to
+	the value of measure_battery_temp.
+};
+
+5. Other Considerations
+=======================
+
+At the charger/battery-related events such as battery-pulled-out,
+charger-pulled-out, charger-inserted, DCIN-over/under-voltage, charger-stopped,
+and others critical to chargers, the system should be configured to wake up.
+At least the following should wake up the system from a suspend:
+a) charger-on/off b) external-power-in/out c) battery-in/out (while charging)
+
+It is usually accomplished by configuring the PMIC as a wakeup source.

arch/arm/mach-omap2/board-rx51-peripherals.c

@@ -944,6 +944,9 @@ static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_2[] = {
 		.platform_data  = &rx51_lp5523_platform_data,
 	},
 #endif
+	{
+		I2C_BOARD_INFO("bq27200", 0x55),
+	},
 	{
 		I2C_BOARD_INFO("tpa6130a2", 0x60),
 		.platform_data = &rx51_tpa6130a2_data,

drivers/hid/hid-wacom.c

@@ -49,12 +49,14 @@ static unsigned short batcap[8] = { 1, 15, 25, 35, 50, 70, 100, 0 };
 
 static enum power_supply_property wacom_battery_props[] = {
 	POWER_SUPPLY_PROP_PRESENT,
-	POWER_SUPPLY_PROP_CAPACITY
+	POWER_SUPPLY_PROP_CAPACITY,
+	POWER_SUPPLY_PROP_SCOPE,
 };
 
 static enum power_supply_property wacom_ac_props[] = {
 	POWER_SUPPLY_PROP_PRESENT,
-	POWER_SUPPLY_PROP_ONLINE
+	POWER_SUPPLY_PROP_ONLINE,
+	POWER_SUPPLY_PROP_SCOPE,
 };
 
 static int wacom_battery_get_property(struct power_supply *psy,
@@ -70,6 +72,9 @@ static int wacom_battery_get_property(struct power_supply *psy,
 	case POWER_SUPPLY_PROP_PRESENT:
 		val->intval = 1;
 		break;
+	case POWER_SUPPLY_PROP_SCOPE:
+		val->intval = POWER_SUPPLY_SCOPE_DEVICE;
+		break;
 	case POWER_SUPPLY_PROP_CAPACITY:
 		/* show 100% battery capacity when charging */
 		if (power_state == 0)
@@ -101,6 +106,9 @@ static int wacom_ac_get_property(struct power_supply *psy,
 		else
 			val->intval = 0;
 		break;
+	case POWER_SUPPLY_PROP_SCOPE:
+		val->intval = POWER_SUPPLY_SCOPE_DEVICE;
+		break;
 	default:
 		ret = -EINVAL;
 		break;
@@ -523,6 +531,8 @@ static int wacom_probe(struct hid_device *hdev,
 	wdata->battery.type = POWER_SUPPLY_TYPE_BATTERY;
 	wdata->battery.use_for_apm = 0;
 
+	power_supply_powers(&wdata->battery, &hdev->dev);
+
 	ret = power_supply_register(&hdev->dev, &wdata->battery);
 	if (ret) {
 		hid_warn(hdev, "can't create sysfs battery attribute, err: %d\n",
@@ -537,6 +547,8 @@ static int wacom_probe(struct hid_device *hdev,
 	wdata->ac.type = POWER_SUPPLY_TYPE_MAINS;
 	wdata->ac.use_for_apm = 0;
 
+	power_supply_powers(&wdata->battery, &hdev->dev);
+
 	ret = power_supply_register(&hdev->dev, &wdata->ac);
 	if (ret) {
 		hid_warn(hdev,

drivers/hid/hid-wiimote-core.c

@@ -52,7 +52,8 @@ static __u16 wiiproto_keymap[] = {
 };
 
 static enum power_supply_property wiimote_battery_props[] = {
-	POWER_SUPPLY_PROP_CAPACITY
+	POWER_SUPPLY_PROP_CAPACITY,
+	POWER_SUPPLY_PROP_SCOPE,
 };
 
 static ssize_t wiimote_hid_send(struct hid_device *hdev, __u8 *buffer,
@@ -402,6 +403,11 @@ static int wiimote_battery_get_property(struct power_supply *psy,
 	int ret = 0, state;
 	unsigned long flags;
 
+	if (psp == POWER_SUPPLY_PROP_SCOPE) {
+		val->intval = POWER_SUPPLY_SCOPE_DEVICE;
+		return 0;
+	}
+
 	ret = wiimote_cmd_acquire(wdata);
 	if (ret)
 		return ret;
@@ -1220,6 +1226,8 @@ static int wiimote_hid_probe(struct hid_device *hdev,
 	wdata->battery.type = POWER_SUPPLY_TYPE_BATTERY;
 	wdata->battery.use_for_apm = 0;
 
+	power_supply_powers(&wdata->battery, &hdev->dev);
+
 	ret = power_supply_register(&wdata->hdev->dev, &wdata->battery);
 	if (ret) {
 		hid_err(hdev, "Cannot register battery device\n");

drivers/mfd/max8925-core.c

@@ -210,21 +210,6 @@ static struct max8925_irq_data max8925_irqs[] = {
 		.mask_reg	= MAX8925_CHG_IRQ1_MASK,
 		.offs		= 1 << 2,
 	},
-	[MAX8925_IRQ_VCHG_USB_OVP] = {
-		.reg		= MAX8925_CHG_IRQ1,
-		.mask_reg	= MAX8925_CHG_IRQ1_MASK,
-		.offs		= 1 << 3,
-	},
-	[MAX8925_IRQ_VCHG_USB_F] =  {
-		.reg		= MAX8925_CHG_IRQ1,
-		.mask_reg	= MAX8925_CHG_IRQ1_MASK,
-		.offs		= 1 << 4,
-	},
-	[MAX8925_IRQ_VCHG_USB_R] = {
-		.reg		= MAX8925_CHG_IRQ1,
-		.mask_reg	= MAX8925_CHG_IRQ1_MASK,
-		.offs		= 1 << 5,
-	},
 	[MAX8925_IRQ_VCHG_THM_OK_R] = {
 		.reg		= MAX8925_CHG_IRQ2,
 		.mask_reg	= MAX8925_CHG_IRQ2_MASK,

drivers/power/Kconfig

@@ -116,12 +116,12 @@ config BATTERY_WM97XX
 	help
 	  Say Y to enable support for battery measured by WM97xx aux port.
 
-config BATTERY_BQ20Z75
-        tristate "TI BQ20z75 gas gauge"
+config BATTERY_SBS
+        tristate "SBS Compliant gas gauge"
         depends on I2C
         help
-         Say Y to include support for TI BQ20z75 SBS-compliant
-         gas gauge and protection IC.
+	  Say Y to include support for SBS battery driver for SBS-compliant
+	  gas gauges.
 
 config BATTERY_BQ27x00
 	tristate "BQ27x00 battery driver"
@@ -150,6 +150,14 @@ config BATTERY_DA9030
 	  Say Y here to enable support for batteries charger integrated into
 	  DA9030 PMIC.
 
+config BATTERY_DA9052
+	tristate "Dialog DA9052 Battery"
+	depends on PMIC_DA9052
+	depends on BROKEN
+	help
+	  Say Y here to enable support for batteries charger integrated into
+	  DA9052 PMIC.
+
 config BATTERY_MAX17040
 	tristate "Maxim MAX17040 Fuel Gauge"
 	depends on I2C
@@ -226,6 +234,12 @@ config CHARGER_TWL4030
 	help
 	  Say Y here to enable support for TWL4030 Battery Charge Interface.
 
+config CHARGER_LP8727
+	tristate "National Semiconductor LP8727 charger driver"
+	depends on I2C
+	help
+	  Say Y here to enable support for LP8727 Charger Driver.
+
 config CHARGER_GPIO
 	tristate "GPIO charger"
 	depends on GPIOLIB
@@ -236,6 +250,16 @@ config CHARGER_GPIO
 	  This driver can be build as a module. If so, the module will be
 	  called gpio-charger.
 
+config CHARGER_MANAGER
+	bool "Battery charger manager for multiple chargers"
+	depends on REGULATOR && RTC_CLASS
+	help
+          Say Y to enable charger-manager support, which allows multiple
+          chargers attached to a battery and multiple batteries attached to a
+          system. The charger-manager also can monitor charging status in
+          runtime and in suspend-to-RAM by waking up the system periodically
+          with help of suspend_again support.
+
 config CHARGER_MAX8997
 	tristate "Maxim MAX8997/MAX8966 PMIC battery charger driver"
 	depends on MFD_MAX8997 && REGULATOR_MAX8997

drivers/power/Makefile

@@ -22,9 +22,10 @@ obj-$(CONFIG_BATTERY_OLPC)	+= olpc_battery.o
 obj-$(CONFIG_BATTERY_TOSA)	+= tosa_battery.o
 obj-$(CONFIG_BATTERY_COLLIE)	+= collie_battery.o
 obj-$(CONFIG_BATTERY_WM97XX)	+= wm97xx_battery.o
-obj-$(CONFIG_BATTERY_BQ20Z75)	+= bq20z75.o
+obj-$(CONFIG_BATTERY_SBS)	+= sbs-battery.o
 obj-$(CONFIG_BATTERY_BQ27x00)	+= bq27x00_battery.o
 obj-$(CONFIG_BATTERY_DA9030)	+= da9030_battery.o
+obj-$(CONFIG_BATTERY_DA9052)	+= da9052-battery.o
 obj-$(CONFIG_BATTERY_MAX17040)	+= max17040_battery.o
 obj-$(CONFIG_BATTERY_MAX17042)	+= max17042_battery.o
 obj-$(CONFIG_BATTERY_Z2)	+= z2_battery.o
@@ -35,6 +36,8 @@ obj-$(CONFIG_BATTERY_INTEL_MID)	+= intel_mid_battery.o
 obj-$(CONFIG_CHARGER_ISP1704)	+= isp1704_charger.o
 obj-$(CONFIG_CHARGER_MAX8903)	+= max8903_charger.o
 obj-$(CONFIG_CHARGER_TWL4030)	+= twl4030_charger.o
+obj-$(CONFIG_CHARGER_LP8727)	+= lp8727_charger.o
 obj-$(CONFIG_CHARGER_GPIO)	+= gpio-charger.o
+obj-$(CONFIG_CHARGER_MANAGER)	+= charger-manager.o
 obj-$(CONFIG_CHARGER_MAX8997)	+= max8997_charger.o
 obj-$(CONFIG_CHARGER_MAX8998)	+= max8998_charger.o

drivers/power/collie_battery.c

@@ -146,7 +146,7 @@ static void collie_bat_external_power_changed(struct power_supply *psy)
 
 static irqreturn_t collie_bat_gpio_isr(int irq, void *data)
 {
-	pr_info("collie_bat_gpio irq: %d\n", gpio_get_value(irq_to_gpio(irq)));
+	pr_info("collie_bat_gpio irq\n");
 	schedule_work(&bat_work);
 	return IRQ_HANDLED;
 }
@@ -277,18 +277,13 @@ static struct collie_bat collie_bat_bu = {
 	.adc_temp_divider = -1,
 };
 
-static struct {
-	int gpio;
-	char *name;
-	bool output;
-	int value;
-} gpios[] = {
-	{ COLLIE_GPIO_CO,		"main battery full",	0, 0 },
-	{ COLLIE_GPIO_MAIN_BAT_LOW,	"main battery low",	0, 0 },
-	{ COLLIE_GPIO_CHARGE_ON,	"main charge on",	1, 0 },
-	{ COLLIE_GPIO_MBAT_ON,		"main battery",		1, 0 },
-	{ COLLIE_GPIO_TMP_ON,		"main battery temp",	1, 0 },
-	{ COLLIE_GPIO_BBAT_ON,		"backup battery",	1, 0 },
+static struct gpio collie_batt_gpios[] = {
+	{ COLLIE_GPIO_CO,	    GPIOF_IN,		"main battery full" },
+	{ COLLIE_GPIO_MAIN_BAT_LOW, GPIOF_IN,		"main battery low" },
+	{ COLLIE_GPIO_CHARGE_ON,    GPIOF_OUT_INIT_LOW,	"main charge on" },
+	{ COLLIE_GPIO_MBAT_ON,	    GPIOF_OUT_INIT_LOW,	"main battery" },
+	{ COLLIE_GPIO_TMP_ON,	    GPIOF_OUT_INIT_LOW,	"main battery temp" },
+	{ COLLIE_GPIO_BBAT_ON,	    GPIOF_OUT_INIT_LOW,	"backup battery" },
 };
 
 #ifdef CONFIG_PM
@@ -313,29 +308,16 @@ static int collie_bat_resume(struct ucb1x00_dev *dev)
 static int __devinit collie_bat_probe(struct ucb1x00_dev *dev)
 {
 	int ret;
-	int i;
 
 	if (!machine_is_collie())
 		return -ENODEV;
 
 	ucb = dev->ucb;
 
-	for (i = 0; i < ARRAY_SIZE(gpios); i++) {
-		ret = gpio_request(gpios[i].gpio, gpios[i].name);
-		if (ret) {
-			i--;
-			goto err_gpio;
-		}
-
-		if (gpios[i].output)
-			ret = gpio_direction_output(gpios[i].gpio,
-					gpios[i].value);
-		else
-			ret = gpio_direction_input(gpios[i].gpio);
-
+	ret = gpio_request_array(collie_batt_gpios,
+				 ARRAY_SIZE(collie_batt_gpios));
 	if (ret)
-			goto err_gpio;
-	}
+		return ret;
 
 	mutex_init(&collie_bat_main.work_lock);
 
@@ -363,19 +345,12 @@ static int __devinit collie_bat_probe(struct ucb1x00_dev *dev)
 
 	/* see comment in collie_bat_remove */
 	cancel_work_sync(&bat_work);
-
-	i--;
-err_gpio:
-	for (; i >= 0; i--)
-		gpio_free(gpios[i].gpio);
-
+	gpio_free_array(collie_batt_gpios, ARRAY_SIZE(collie_batt_gpios));
 	return ret;
 }
 
 static void __devexit collie_bat_remove(struct ucb1x00_dev *dev)
 {
-	int i;
-
 	free_irq(gpio_to_irq(COLLIE_GPIO_CO), &collie_bat_main);
 
 	power_supply_unregister(&collie_bat_bu.psy);
@@ -387,9 +362,7 @@ static void __devexit collie_bat_remove(struct ucb1x00_dev *dev)
 	 * unregistered now.
 	 */
 	cancel_work_sync(&bat_work);
-
-	for (i = ARRAY_SIZE(gpios) - 1; i >= 0; i--)
-		gpio_free(gpios[i].gpio);
+	gpio_free_array(collie_batt_gpios, ARRAY_SIZE(collie_batt_gpios));
 }
 
 static struct ucb1x00_driver collie_bat_driver = {

drivers/power/da9030_battery.c

@@ -588,18 +588,7 @@ static struct platform_driver da903x_battery_driver = {
 	.remove = da9030_battery_remove,
 };
 
-static int da903x_battery_init(void)
-{
-	return platform_driver_register(&da903x_battery_driver);
-}
-
-static void da903x_battery_exit(void)
-{
-	platform_driver_unregister(&da903x_battery_driver);
-}
-
-module_init(da903x_battery_init);
-module_exit(da903x_battery_exit);
+module_platform_driver(da903x_battery_driver);
 
 MODULE_DESCRIPTION("DA9030 battery charger driver");
 MODULE_AUTHOR("Mike Rapoport, CompuLab");

drivers/power/ds2760_battery.c

@@ -95,7 +95,11 @@ static int rated_capacities[] = {
 	2880,	/* Samsung */
 	2880,	/* BYD */
 	2880,	/* Lishen */
-	2880	/* NEC */
+	2880,	/* NEC */
+#ifdef CONFIG_MACH_H4700
+	0,
+	3600,	/* HP iPAQ hx4700 3.7V 3600mAh (359114-001) */
+#endif
 };
 
 /* array is level at temps 0°C, 10°C, 20°C, 30°C, 40°C
@@ -637,18 +641,7 @@ static struct platform_driver ds2760_battery_driver = {
 	.resume	  = ds2760_battery_resume,
 };
 
-static int __init ds2760_battery_init(void)
-{
-	return platform_driver_register(&ds2760_battery_driver);
-}
-
-static void __exit ds2760_battery_exit(void)
-{
-	platform_driver_unregister(&ds2760_battery_driver);
-}
-
-module_init(ds2760_battery_init);
-module_exit(ds2760_battery_exit);
+module_platform_driver(ds2760_battery_driver);
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Szabolcs Gyurko <szabolcs.gyurko@tlt.hu>, "

drivers/power/ds2780_battery.c

@@ -841,29 +841,17 @@ static int __devexit ds2780_battery_remove(struct platform_device *pdev)
 	return 0;
 }
 
-MODULE_ALIAS("platform:ds2780-battery");
-
 static struct platform_driver ds2780_battery_driver = {
 	.driver = {
 		.name = "ds2780-battery",
 	},
 	.probe	  = ds2780_battery_probe,
-	.remove   = ds2780_battery_remove,
+	.remove   = __devexit_p(ds2780_battery_remove),
 };
 
-static int __init ds2780_battery_init(void)
-{
-	return platform_driver_register(&ds2780_battery_driver);
-}
-
-static void __exit ds2780_battery_exit(void)
-{
-	platform_driver_unregister(&ds2780_battery_driver);
-}
-
-module_init(ds2780_battery_init);
-module_exit(ds2780_battery_exit);
+module_platform_driver(ds2780_battery_driver);
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Clifton Barnes <cabarnes@indesign-llc.com>");
 MODULE_DESCRIPTION("Maxim/Dallas DS2780 Stand-Alone Fuel Gauage IC driver");
+MODULE_ALIAS("platform:ds2780-battery");

drivers/power/gpio-charger.c

@@ -185,17 +185,7 @@ static struct platform_driver gpio_charger_driver = {
 	},
 };
 
-static int __init gpio_charger_init(void)
-{
-	return platform_driver_register(&gpio_charger_driver);
-}
-module_init(gpio_charger_init);
-
-static void __exit gpio_charger_exit(void)
-{
-	platform_driver_unregister(&gpio_charger_driver);
-}
-module_exit(gpio_charger_exit);
+module_platform_driver(gpio_charger_driver);
 
 MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
 MODULE_DESCRIPTION("Driver for chargers which report their online status through a GPIO");

drivers/power/intel_mid_battery.c

@@ -779,18 +779,7 @@ static struct platform_driver platform_pmic_battery_driver = {
 	.remove = __devexit_p(platform_pmic_battery_remove),
 };
 
-static int __init platform_pmic_battery_module_init(void)
-{
-	return platform_driver_register(&platform_pmic_battery_driver);
-}
-
-static void __exit platform_pmic_battery_module_exit(void)
-{
-	platform_driver_unregister(&platform_pmic_battery_driver);
-}
-
-module_init(platform_pmic_battery_module_init);
-module_exit(platform_pmic_battery_module_exit);
+module_platform_driver(platform_pmic_battery_driver);
 
 MODULE_AUTHOR("Nithish Mahalingam <nithish.mahalingam@intel.com>");
 MODULE_DESCRIPTION("Intel Moorestown PMIC Battery Driver");

drivers/power/isp1704_charger.c

@@ -79,7 +79,7 @@ static void isp1704_charger_set_power(struct isp1704_charger *isp, bool on)
 {
 	struct isp1704_charger_data	*board = isp->dev->platform_data;
 
-	if (board->set_power)
+	if (board && board->set_power)
 		board->set_power(on);
 }
 
@@ -494,17 +494,7 @@ static struct platform_driver isp1704_charger_driver = {
 	.remove = __devexit_p(isp1704_charger_remove),
 };
 
-static int __init isp1704_charger_init(void)
-{
-	return platform_driver_register(&isp1704_charger_driver);
-}
-module_init(isp1704_charger_init);
-
-static void __exit isp1704_charger_exit(void)
-{
-	platform_driver_unregister(&isp1704_charger_driver);
-}
-module_exit(isp1704_charger_exit);
+module_platform_driver(isp1704_charger_driver);
 
 MODULE_ALIAS("platform:isp1704_charger");
 MODULE_AUTHOR("Nokia Corporation");

drivers/power/jz4740-battery.c

@@ -67,7 +67,7 @@ static irqreturn_t jz_battery_irq_handler(int irq, void *devid)
 
 static long jz_battery_read_voltage(struct jz_battery *battery)
 {
-	unsigned long t;
+	long t;
 	unsigned long val;
 	long voltage;
 
@@ -441,17 +441,7 @@ static struct platform_driver jz_battery_driver = {
 	},
 };
 
-static int __init jz_battery_init(void)
-{
-	return platform_driver_register(&jz_battery_driver);
-}
-module_init(jz_battery_init);
-
-static void __exit jz_battery_exit(void)
-{
-	platform_driver_unregister(&jz_battery_driver);
-}
-module_exit(jz_battery_exit);
+module_platform_driver(jz_battery_driver);
 
 MODULE_ALIAS("platform:jz4740-battery");
 MODULE_LICENSE("GPL");

drivers/power/max17042_battery.c

@@ -85,55 +85,79 @@ static int max17042_get_property(struct power_supply *psy,
 {
 	struct max17042_chip *chip = container_of(psy,
 				struct max17042_chip, battery);
+	int ret;
 
 	switch (psp) {
 	case POWER_SUPPLY_PROP_PRESENT:
-		val->intval = max17042_read_reg(chip->client,
-				MAX17042_STATUS);
-		if (val->intval & MAX17042_STATUS_BattAbsent)
+		ret = max17042_read_reg(chip->client, MAX17042_STATUS);
+		if (ret < 0)
+			return ret;
+
+		if (ret & MAX17042_STATUS_BattAbsent)
 			val->intval = 0;
 		else
 			val->intval = 1;
 		break;
 	case POWER_SUPPLY_PROP_CYCLE_COUNT:
-		val->intval = max17042_read_reg(chip->client,
-				MAX17042_Cycles);
+		ret = max17042_read_reg(chip->client, MAX17042_Cycles);
+		if (ret < 0)
+			return ret;
+
+		val->intval = ret;
 		break;
 	case POWER_SUPPLY_PROP_VOLTAGE_MAX:
-		val->intval = max17042_read_reg(chip->client,
-				MAX17042_MinMaxVolt);
-		val->intval >>= 8;
+		ret = max17042_read_reg(chip->client, MAX17042_MinMaxVolt);
+		if (ret < 0)
+			return ret;
+
+		val->intval = ret >> 8;
 		val->intval *= 20000; /* Units of LSB = 20mV */
 		break;
 	case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
-		val->intval = max17042_read_reg(chip->client,
-				MAX17042_V_empty);
-		val->intval >>= 7;
+		ret = max17042_read_reg(chip->client, MAX17042_V_empty);
+		if (ret < 0)
+			return ret;
+
+		val->intval = ret >> 7;
 		val->intval *= 10000; /* Units of LSB = 10mV */
 		break;
 	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
-		val->intval = max17042_read_reg(chip->client,
-				MAX17042_VCELL) * 83; /* 1000 / 12 = 83 */
+		ret = max17042_read_reg(chip->client, MAX17042_VCELL);
+		if (ret < 0)
+			return ret;
+
+		val->intval = ret * 625 / 8;
 		break;
 	case POWER_SUPPLY_PROP_VOLTAGE_AVG:
-		val->intval = max17042_read_reg(chip->client,
-				MAX17042_AvgVCELL) * 83;
+		ret = max17042_read_reg(chip->client, MAX17042_AvgVCELL);
+		if (ret < 0)
+			return ret;
+
+		val->intval = ret * 625 / 8;
 		break;
 	case POWER_SUPPLY_PROP_CAPACITY:
-		val->intval = max17042_read_reg(chip->client,
-				MAX17042_SOC) / 256;
+		ret = max17042_read_reg(chip->client, MAX17042_SOC);
+		if (ret < 0)
+			return ret;
+
+		val->intval = ret >> 8;
 		break;
 	case POWER_SUPPLY_PROP_CHARGE_FULL:
-		val->intval = max17042_read_reg(chip->client,
-				MAX17042_RepSOC);
-		if ((val->intval / 256) >= MAX17042_BATTERY_FULL)
+		ret = max17042_read_reg(chip->client, MAX17042_RepSOC);
+		if (ret < 0)
+			return ret;
+
+		if ((ret >> 8) >= MAX17042_BATTERY_FULL)
 			val->intval = 1;
-		else if (val->intval >= 0)
+		else if (ret >= 0)
 			val->intval = 0;
 		break;
 	case POWER_SUPPLY_PROP_TEMP:
-		val->intval = max17042_read_reg(chip->client,
-				MAX17042_TEMP);
+		ret = max17042_read_reg(chip->client, MAX17042_TEMP);
+		if (ret < 0)
+			return ret;
+
+		val->intval = ret;
 		/* The value is signed. */
 		if (val->intval & 0x8000) {
 			val->intval = (0x7fff & ~val->intval) + 1;
@@ -145,24 +169,30 @@ static int max17042_get_property(struct power_supply *psy,
 		break;
 	case POWER_SUPPLY_PROP_CURRENT_NOW:
 		if (chip->pdata->enable_current_sense) {
-			val->intval = max17042_read_reg(chip->client,
-					MAX17042_Current);
+			ret = max17042_read_reg(chip->client, MAX17042_Current);
+			if (ret < 0)
+				return ret;
+
+			val->intval = ret;
 			if (val->intval & 0x8000) {
 				/* Negative */
 				val->intval = ~val->intval & 0x7fff;
 				val->intval++;
 				val->intval *= -1;
 			}
-			val->intval >>= 4;
-			val->intval *= 1000000 * 25 / chip->pdata->r_sns;
+			val->intval *= 1562500 / chip->pdata->r_sns;
 		} else {
 			return -EINVAL;
 		}
 		break;
 	case POWER_SUPPLY_PROP_CURRENT_AVG:
 		if (chip->pdata->enable_current_sense) {
-			val->intval = max17042_read_reg(chip->client,
+			ret = max17042_read_reg(chip->client,
 						MAX17042_AvgCurrent);
+			if (ret < 0)
+				return ret;
+
+			val->intval = ret;
 			if (val->intval & 0x8000) {
 				/* Negative */
 				val->intval = ~val->intval & 0x7fff;
@@ -210,6 +240,9 @@ static int __devinit max17042_probe(struct i2c_client *client,
 	if (!chip->pdata->enable_current_sense)
 		chip->battery.num_properties -= 2;
 
+	if (chip->pdata->r_sns == 0)
+		chip->pdata->r_sns = MAX17042_DEFAULT_SNS_RESISTOR;
+
 	ret = power_supply_register(&client->dev, &chip->battery);
 	if (ret) {
 		dev_err(&client->dev, "failed: power supply register\n");
@@ -226,9 +259,6 @@ static int __devinit max17042_probe(struct i2c_client *client,
 		max17042_write_reg(client, MAX17042_CGAIN, 0x0000);
 		max17042_write_reg(client, MAX17042_MiscCFG, 0x0003);
 		max17042_write_reg(client, MAX17042_LearnCFG, 0x0007);
-	} else {
-		if (chip->pdata->r_sns == 0)
-			chip->pdata->r_sns = MAX17042_DEFAULT_SNS_RESISTOR;
 	}
 
 	return 0;

drivers/power/max8903_charger.c

@@ -374,19 +374,9 @@ static struct platform_driver max8903_driver = {
 	},
 };
 
-static int __init max8903_init(void)
-{
-	return platform_driver_register(&max8903_driver);
-}
-module_init(max8903_init);
-
-static void __exit max8903_exit(void)
-{
-	platform_driver_unregister(&max8903_driver);
-}
-module_exit(max8903_exit);
+module_platform_driver(max8903_driver);
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("MAX8903 Charger Driver");
 MODULE_AUTHOR("MyungJoo Ham <myungjoo.ham@samsung.com>");
-MODULE_ALIAS("max8903-charger");
+MODULE_ALIAS("platform:max8903-charger");

drivers/power/max8925_power.c

@@ -78,6 +78,8 @@ struct max8925_power_info {
 	unsigned		batt_detect:1;	/* detecing MB by ID pin */
 	unsigned		topoff_threshold:2;
 	unsigned		fast_charge:3;
+	unsigned		no_temp_support:1;
+	unsigned		no_insert_detect:1;
 
 	int (*set_charger) (int);
 };
@@ -116,17 +118,7 @@ static irqreturn_t max8925_charger_handler(int irq, void *data)
 	case MAX8925_IRQ_VCHG_DC_F:
 		info->ac_online = 0;
 		__set_charger(info, 0);
-		dev_dbg(chip->dev, "Adapter is removal\n");
-		break;
-	case MAX8925_IRQ_VCHG_USB_R:
-		info->usb_online = 1;
-		__set_charger(info, 1);
-		dev_dbg(chip->dev, "USB inserted\n");
-		break;
-	case MAX8925_IRQ_VCHG_USB_F:
-		info->usb_online = 0;
-		__set_charger(info, 0);
-		dev_dbg(chip->dev, "USB is removal\n");
+		dev_dbg(chip->dev, "Adapter removed\n");
 		break;
 	case MAX8925_IRQ_VCHG_THM_OK_F:
 		/* Battery is not ready yet */
@@ -168,27 +160,33 @@ static irqreturn_t max8925_charger_handler(int irq, void *data)
 static int start_measure(struct max8925_power_info *info, int type)
 {
 	unsigned char buf[2] = {0, 0};
+	int meas_cmd;
 	int meas_reg = 0, ret;
 
 	switch (type) {
 	case MEASURE_VCHG:
+		meas_cmd = MAX8925_CMD_VCHG;
 		meas_reg = MAX8925_ADC_VCHG;
 		break;
 	case MEASURE_VBBATT:
+		meas_cmd = MAX8925_CMD_VBBATT;
 		meas_reg = MAX8925_ADC_VBBATT;
 		break;
 	case MEASURE_VMBATT:
+		meas_cmd = MAX8925_CMD_VMBATT;
 		meas_reg = MAX8925_ADC_VMBATT;
 		break;
 	case MEASURE_ISNS:
+		meas_cmd = MAX8925_CMD_ISNS;
 		meas_reg = MAX8925_ADC_ISNS;
 		break;
 	default:
 		return -EINVAL;
 	}
 
+	max8925_reg_write(info->adc, meas_cmd, 0);
 	max8925_bulk_read(info->adc, meas_reg, 2, buf);
-	ret = (buf[0] << 4) | (buf[1] >> 4);
+	ret = ((buf[0]<<8) | buf[1]) >> 4;
 
 	return ret;
 }
@@ -208,7 +206,7 @@ static int max8925_ac_get_prop(struct power_supply *psy,
 		if (info->ac_online) {
 			ret = start_measure(info, MEASURE_VCHG);
 			if (ret >= 0) {
-				val->intval = ret << 1;	/* unit is mV */
+				val->intval = ret * 2000;	/* unit is uV */
 				goto out;
 			}
 		}
@@ -242,7 +240,7 @@ static int max8925_usb_get_prop(struct power_supply *psy,
 		if (info->usb_online) {
 			ret = start_measure(info, MEASURE_VCHG);
 			if (ret >= 0) {
-				val->intval = ret << 1;	/* unit is mV */
+				val->intval = ret * 2000;	/* unit is uV */
 				goto out;
 			}
 		}
@@ -266,7 +264,6 @@ static int max8925_bat_get_prop(struct power_supply *psy,
 				union power_supply_propval *val)
 {
 	struct max8925_power_info *info = dev_get_drvdata(psy->dev->parent);
-	long long int tmp = 0;
 	int ret = 0;
 
 	switch (psp) {
@@ -277,7 +274,7 @@ static int max8925_bat_get_prop(struct power_supply *psy,
 		if (info->bat_online) {
 			ret = start_measure(info, MEASURE_VMBATT);
 			if (ret >= 0) {
-				val->intval = ret << 1;	/* unit is mV */
+				val->intval = ret * 2000;	/* unit is uV */
 				ret = 0;
 				break;
 			}
@@ -288,8 +285,8 @@ static int max8925_bat_get_prop(struct power_supply *psy,
 		if (info->bat_online) {
 			ret = start_measure(info, MEASURE_ISNS);
 			if (ret >= 0) {
-				tmp = (long long int)ret * 6250 / 4096 - 3125;
-				ret = (int)tmp;
+				/* assume r_sns is 0.02 */
+				ret = ((ret * 6250) - 3125) /* uA */;
 				val->intval = 0;
 				if (ret > 0)
 					val->intval = ret; /* unit is mA */
@@ -365,13 +362,14 @@ static __devinit int max8925_init_charger(struct max8925_chip *chip,
 	int ret;
 
 	REQUEST_IRQ(MAX8925_IRQ_VCHG_DC_OVP, "ac-ovp");
+	if (!info->no_insert_detect) {
 		REQUEST_IRQ(MAX8925_IRQ_VCHG_DC_F, "ac-remove");
 		REQUEST_IRQ(MAX8925_IRQ_VCHG_DC_R, "ac-insert");
-	REQUEST_IRQ(MAX8925_IRQ_VCHG_USB_OVP, "usb-ovp");
-	REQUEST_IRQ(MAX8925_IRQ_VCHG_USB_F, "usb-remove");
-	REQUEST_IRQ(MAX8925_IRQ_VCHG_USB_R, "usb-insert");
+	}
+	if (!info->no_temp_support) {
 		REQUEST_IRQ(MAX8925_IRQ_VCHG_THM_OK_R, "batt-temp-in-range");
 		REQUEST_IRQ(MAX8925_IRQ_VCHG_THM_OK_F, "batt-temp-out-range");
+	}
 	REQUEST_IRQ(MAX8925_IRQ_VCHG_SYSLOW_F, "vsys-high");
 	REQUEST_IRQ(MAX8925_IRQ_VCHG_SYSLOW_R, "vsys-low");
 	REQUEST_IRQ(MAX8925_IRQ_VCHG_RST, "charger-reset");
@@ -379,9 +377,15 @@ static __devinit int max8925_init_charger(struct max8925_chip *chip,
 	REQUEST_IRQ(MAX8925_IRQ_VCHG_TOPOFF, "charger-topoff");
 	REQUEST_IRQ(MAX8925_IRQ_VCHG_TMR_FAULT, "charger-timer-expire");
 
-	info->ac_online = 0;
 	info->usb_online = 0;
 	info->bat_online = 0;
+
+	/* check for power - can miss interrupt at boot time */
+	if (start_measure(info, MEASURE_VCHG) * 2000 > 500000)
+		info->ac_online = 1;
+	else
+		info->ac_online = 0;
+
 	ret = max8925_reg_read(info->gpm, MAX8925_CHG_STATUS);
 	if (ret >= 0) {
 		/*
@@ -449,6 +453,8 @@ static __devinit int max8925_power_probe(struct platform_device *pdev)
 	info->ac.properties = max8925_ac_props;
 	info->ac.num_properties = ARRAY_SIZE(max8925_ac_props);
 	info->ac.get_property = max8925_ac_get_prop;
+	info->ac.supplied_to = pdata->supplied_to;
+	info->ac.num_supplicants = pdata->num_supplicants;
 	ret = power_supply_register(&pdev->dev, &info->ac);
 	if (ret)
 		goto out;
@@ -459,6 +465,9 @@ static __devinit int max8925_power_probe(struct platform_device *pdev)
 	info->usb.properties = max8925_usb_props;
 	info->usb.num_properties = ARRAY_SIZE(max8925_usb_props);
 	info->usb.get_property = max8925_usb_get_prop;
+	info->usb.supplied_to = pdata->supplied_to;
+	info->usb.num_supplicants = pdata->num_supplicants;
+
 	ret = power_supply_register(&pdev->dev, &info->usb);
 	if (ret)
 		goto out_usb;
@@ -478,6 +487,8 @@ static __devinit int max8925_power_probe(struct platform_device *pdev)
 	info->topoff_threshold = pdata->topoff_threshold;
 	info->fast_charge = pdata->fast_charge;
 	info->set_charger = pdata->set_charger;
+	info->no_temp_support = pdata->no_temp_support;
+	info->no_insert_detect = pdata->no_insert_detect;
 
 	max8925_init_charger(chip, info);
 	return 0;
@@ -512,17 +523,7 @@ static struct platform_driver max8925_power_driver = {
 	},
 };
 
-static int __init max8925_power_init(void)
-{
-	return platform_driver_register(&max8925_power_driver);
-}
-module_init(max8925_power_init);
-
-static void __exit max8925_power_exit(void)
-{
-	platform_driver_unregister(&max8925_power_driver);
-}
-module_exit(max8925_power_exit);
+module_platform_driver(max8925_power_driver);
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("Power supply driver for MAX8925");

drivers/power/max8997_charger.c

@@ -19,7 +19,6 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
-#include <linux/module.h>
 #include <linux/err.h>
 #include <linux/module.h>
 #include <linux/slab.h>
@@ -98,7 +97,7 @@ static __devinit int max8997_battery_probe(struct platform_device *pdev)
 		return -EINVAL;
 
 	if (pdata->eoc_mA) {
-		u8 val = (pdata->eoc_mA - 50) / 10;
+		int val = (pdata->eoc_mA - 50) / 10;
 		if (val < 0)
 			val = 0;
 		if (val > 0xf)
@@ -179,6 +178,7 @@ static int __devexit max8997_battery_remove(struct platform_device *pdev)
 
 static const struct platform_device_id max8997_battery_id[] = {
 	{ "max8997-battery", 0 },
+	{ }
 };
 
 static struct platform_driver max8997_battery_driver = {

drivers/power/max8998_charger.c

@@ -154,6 +154,7 @@ static __devinit int max8998_battery_probe(struct platform_device *pdev)
 	case 0:
 		dev_dbg(max8998->dev,
 			"Full Timeout not set: leave it unchanged.\n");
+		break;
 	default:
 		dev_err(max8998->dev, "Invalid Full Timeout value\n");
 		ret = -EINVAL;
@@ -190,6 +191,7 @@ static int __devexit max8998_battery_remove(struct platform_device *pdev)
 
 static const struct platform_device_id max8998_battery_id[] = {
 	{ "max8998-battery", TYPE_MAX8998 },
+	{ }
 };
 
 static struct platform_driver max8998_battery_driver = {
@@ -202,17 +204,7 @@ static struct platform_driver max8998_battery_driver = {
 	.id_table = max8998_battery_id,
 };
 
-static int __init max8998_battery_init(void)
-{
-	return platform_driver_register(&max8998_battery_driver);
-}
-module_init(max8998_battery_init);
-
-static void __exit max8998_battery_cleanup(void)
-{
-	platform_driver_unregister(&max8998_battery_driver);
-}
-module_exit(max8998_battery_cleanup);
+module_platform_driver(max8998_battery_driver);
 
 MODULE_DESCRIPTION("MAXIM 8998 battery control driver");
 MODULE_AUTHOR("MyungJoo Ham <myungjoo.ham@samsung.com>");

drivers/power/olpc_battery.c

@@ -519,29 +519,35 @@ static struct device_attribute olpc_bat_error = {
  *		Initialisation
  *********************************************************************/
 
-static struct platform_device *bat_pdev;
-
 static struct power_supply olpc_bat = {
+	.name = "olpc-battery",
 	.get_property = olpc_bat_get_property,
 	.use_for_apm = 1,
 };
 
-void olpc_battery_trigger_uevent(unsigned long cause)
+static int olpc_battery_suspend(struct platform_device *pdev,
+				pm_message_t state)
 {
-	if (cause & EC_SCI_SRC_ACPWR)
-		kobject_uevent(&olpc_ac.dev->kobj, KOBJ_CHANGE);
-	if (cause & (EC_SCI_SRC_BATERR|EC_SCI_SRC_BATSOC|EC_SCI_SRC_BATTERY))
-		kobject_uevent(&olpc_bat.dev->kobj, KOBJ_CHANGE);
+	if (device_may_wakeup(olpc_ac.dev))
+		olpc_ec_wakeup_set(EC_SCI_SRC_ACPWR);
+	else
+		olpc_ec_wakeup_clear(EC_SCI_SRC_ACPWR);
+
+	if (device_may_wakeup(olpc_bat.dev))
+		olpc_ec_wakeup_set(EC_SCI_SRC_BATTERY | EC_SCI_SRC_BATSOC
+				   | EC_SCI_SRC_BATERR);
+	else
+		olpc_ec_wakeup_clear(EC_SCI_SRC_BATTERY | EC_SCI_SRC_BATSOC
+				     | EC_SCI_SRC_BATERR);
+
+	return 0;
 }
 
-static int __init olpc_bat_init(void)
+static int __devinit olpc_battery_probe(struct platform_device *pdev)
 {
-	int ret = 0;
+	int ret;
 	uint8_t status;
 
-	if (!olpc_platform_info.ecver)
-		return -ENXIO;
-
 	/*
 	 * We've seen a number of EC protocol changes; this driver requires
 	 * the latest EC protocol, supported by 0x44 and above.
@@ -558,15 +564,10 @@ static int __init olpc_bat_init(void)
 
 	/* Ignore the status. It doesn't actually matter */
 
-	bat_pdev = platform_device_register_simple("olpc-battery", 0, NULL, 0);
-	if (IS_ERR(bat_pdev))
-		return PTR_ERR(bat_pdev);
-
-	ret = power_supply_register(&bat_pdev->dev, &olpc_ac);
+	ret = power_supply_register(&pdev->dev, &olpc_ac);
 	if (ret)
-		goto ac_failed;
+		return ret;
 
-	olpc_bat.name = bat_pdev->name;
 	if (olpc_board_at_least(olpc_board_pre(0xd0))) { /* XO-1.5 */
 		olpc_bat.properties = olpc_xo15_bat_props;
 		olpc_bat.num_properties = ARRAY_SIZE(olpc_xo15_bat_props);
@@ -575,7 +576,7 @@ static int __init olpc_bat_init(void)
 		olpc_bat.num_properties = ARRAY_SIZE(olpc_xo1_bat_props);
 	}
 
-	ret = power_supply_register(&bat_pdev->dev, &olpc_bat);
+	ret = power_supply_register(&pdev->dev, &olpc_bat);
 	if (ret)
 		goto battery_failed;
 
@@ -587,7 +588,12 @@ static int __init olpc_bat_init(void)
 	if (ret)
 		goto error_failed;
 
-	goto success;
+	if (olpc_ec_wakeup_available()) {
+		device_set_wakeup_capable(olpc_ac.dev, true);
+		device_set_wakeup_capable(olpc_bat.dev, true);
+	}
+
+	return 0;
 
 error_failed:
 	device_remove_bin_file(olpc_bat.dev, &olpc_bat_eeprom);
@@ -595,23 +601,36 @@ static int __init olpc_bat_init(void)
 	power_supply_unregister(&olpc_bat);
 battery_failed:
 	power_supply_unregister(&olpc_ac);
-ac_failed:
-	platform_device_unregister(bat_pdev);
-success:
 	return ret;
 }
 
-static void __exit olpc_bat_exit(void)
+static int __devexit olpc_battery_remove(struct platform_device *pdev)
 {
 	device_remove_file(olpc_bat.dev, &olpc_bat_error);
 	device_remove_bin_file(olpc_bat.dev, &olpc_bat_eeprom);
 	power_supply_unregister(&olpc_bat);
 	power_supply_unregister(&olpc_ac);
-	platform_device_unregister(bat_pdev);
+	return 0;
 }
 
-module_init(olpc_bat_init);
-module_exit(olpc_bat_exit);
+static const struct of_device_id olpc_battery_ids[] __devinitconst = {
+	{ .compatible = "olpc,xo1-battery" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, olpc_battery_ids);
+
+static struct platform_driver olpc_battery_driver = {
+	.driver = {
+		.name = "olpc-battery",
+		.owner = THIS_MODULE,
+		.of_match_table = olpc_battery_ids,
+	},
+	.probe = olpc_battery_probe,
+	.remove = __devexit_p(olpc_battery_remove),
+	.suspend = olpc_battery_suspend,
+};
+
+module_platform_driver(olpc_battery_driver);
 
 MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org>");
 MODULE_LICENSE("GPL");

drivers/power/pcf50633-charger.c

@@ -474,17 +474,7 @@ static struct platform_driver pcf50633_mbc_driver = {
 	.remove = __devexit_p(pcf50633_mbc_remove),
 };
 
-static int __init pcf50633_mbc_init(void)
-{
-	return platform_driver_register(&pcf50633_mbc_driver);
-}
-module_init(pcf50633_mbc_init);
-
-static void __exit pcf50633_mbc_exit(void)
-{
-	platform_driver_unregister(&pcf50633_mbc_driver);
-}
-module_exit(pcf50633_mbc_exit);
+module_platform_driver(pcf50633_mbc_driver);
 
 MODULE_AUTHOR("Balaji Rao <balajirrao@openmoko.org>");
 MODULE_DESCRIPTION("PCF50633 mbc driver");

drivers/power/pda_power.c

@@ -14,6 +14,7 @@
 #include <linux/platform_device.h>
 #include <linux/err.h>
 #include <linux/interrupt.h>
+#include <linux/notifier.h>
 #include <linux/power_supply.h>
 #include <linux/pda_power.h>
 #include <linux/regulator/consumer.h>
@@ -40,7 +41,9 @@ static int polling;
 
 #ifdef CONFIG_USB_OTG_UTILS
 static struct otg_transceiver *transceiver;
+static struct notifier_block otg_nb;
 #endif
+
 static struct regulator *ac_draw;
 
 enum {
@@ -222,7 +225,42 @@ static void polling_timer_func(unsigned long unused)
 #ifdef CONFIG_USB_OTG_UTILS
 static int otg_is_usb_online(void)
 {
-	return (transceiver->state == OTG_STATE_B_PERIPHERAL);
+	return (transceiver->last_event == USB_EVENT_VBUS ||
+		transceiver->last_event == USB_EVENT_ENUMERATED);
+}
+
+static int otg_is_ac_online(void)
+{
+	return (transceiver->last_event == USB_EVENT_CHARGER);
+}
+
+static int otg_handle_notification(struct notifier_block *nb,
+		unsigned long event, void *unused)
+{
+	switch (event) {
+	case USB_EVENT_CHARGER:
+		ac_status = PDA_PSY_TO_CHANGE;
+		break;
+	case USB_EVENT_VBUS:
+	case USB_EVENT_ENUMERATED:
+		usb_status = PDA_PSY_TO_CHANGE;
+		break;
+	case USB_EVENT_NONE:
+		ac_status = PDA_PSY_TO_CHANGE;
+		usb_status = PDA_PSY_TO_CHANGE;
+		break;
+	default:
+		return NOTIFY_OK;
+	}
+
+	/*
+	 * Wait a bit before reading ac/usb line status and setting charger,
+	 * because ac/usb status readings may lag from irq.
+	 */
+	mod_timer(&charger_timer,
+		  jiffies + msecs_to_jiffies(pdata->wait_for_status));
+
+	return NOTIFY_OK;
 }
 #endif
 
@@ -282,6 +320,16 @@ static int pda_power_probe(struct platform_device *pdev)
 		ret = PTR_ERR(ac_draw);
 	}
 
+#ifdef CONFIG_USB_OTG_UTILS
+	transceiver = otg_get_transceiver();
+	if (transceiver && !pdata->is_usb_online) {
+		pdata->is_usb_online = otg_is_usb_online;
+	}
+	if (transceiver && !pdata->is_ac_online) {
+		pdata->is_ac_online = otg_is_ac_online;
+	}
+#endif
+
 	if (pdata->is_ac_online) {
 		ret = power_supply_register(&pdev->dev, &pda_psy_ac);
 		if (ret) {
@@ -303,13 +351,6 @@ static int pda_power_probe(struct platform_device *pdev)
 		}
 	}
 
-#ifdef CONFIG_USB_OTG_UTILS
-	transceiver = otg_get_transceiver();
-	if (transceiver && !pdata->is_usb_online) {
-		pdata->is_usb_online = otg_is_usb_online;
-	}
-#endif
-
 	if (pdata->is_usb_online) {
 		ret = power_supply_register(&pdev->dev, &pda_psy_usb);
 		if (ret) {
@@ -331,6 +372,18 @@ static int pda_power_probe(struct platform_device *pdev)
 		}
 	}
 
+#ifdef CONFIG_USB_OTG_UTILS
+	if (transceiver && pdata->use_otg_notifier) {
+		otg_nb.notifier_call = otg_handle_notification;
+		ret = otg_register_notifier(transceiver, &otg_nb);
+		if (ret) {
+			dev_err(dev, "failure to register otg notifier\n");
+			goto otg_reg_notifier_failed;
+		}
+		polling = 0;
+	}
+#endif
+
 	if (polling) {
 		dev_dbg(dev, "will poll for status\n");
 		setup_timer(&polling_timer, polling_timer_func, 0);
@@ -343,6 +396,11 @@ static int pda_power_probe(struct platform_device *pdev)
 
 	return 0;
 
+#ifdef CONFIG_USB_OTG_UTILS
+otg_reg_notifier_failed:
+	if (pdata->is_usb_online && usb_irq)
+		free_irq(usb_irq->start, &pda_psy_usb);
+#endif
 usb_irq_failed:
 	if (pdata->is_usb_online)
 		power_supply_unregister(&pda_psy_usb);
@@ -440,8 +498,6 @@ static int pda_power_resume(struct platform_device *pdev)
 #define pda_power_resume NULL
 #endif /* CONFIG_PM */
 
-MODULE_ALIAS("platform:pda-power");
-
 static struct platform_driver pda_power_pdrv = {
 	.driver = {
 		.name = "pda-power",
@@ -452,17 +508,8 @@ static struct platform_driver pda_power_pdrv = {
 	.resume = pda_power_resume,
 };
 
-static int __init pda_power_init(void)
-{
-	return platform_driver_register(&pda_power_pdrv);
-}
+module_platform_driver(pda_power_pdrv);
 
-static void __exit pda_power_exit(void)
-{
-	platform_driver_unregister(&pda_power_pdrv);
-}
-
-module_init(pda_power_init);
-module_exit(pda_power_exit);
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Anton Vorontsov <cbou@mail.ru>");
+MODULE_ALIAS("platform:pda-power");

drivers/power/power_supply_core.c

@@ -98,7 +98,9 @@ static int __power_supply_is_system_supplied(struct device *dev, void *data)
 {
 	union power_supply_propval ret = {0,};
 	struct power_supply *psy = dev_get_drvdata(dev);
+	unsigned int *count = data;
 
+	(*count)++;
 	if (psy->type != POWER_SUPPLY_TYPE_BATTERY) {
 		if (psy->get_property(psy, POWER_SUPPLY_PROP_ONLINE, &ret))
 			return 0;
@@ -111,10 +113,18 @@ static int __power_supply_is_system_supplied(struct device *dev, void *data)
 int power_supply_is_system_supplied(void)
 {
 	int error;
+	unsigned int count = 0;
 
-	error = class_for_each_device(power_supply_class, NULL, NULL,
+	error = class_for_each_device(power_supply_class, NULL, &count,
 				      __power_supply_is_system_supplied);
 
+	/*
+	 * If no power class device was found at all, most probably we are
+	 * running on a desktop system, so assume we are on mains power.
+	 */
+	if (count == 0)
+		return 1;
+
 	return error;
 }
 EXPORT_SYMBOL_GPL(power_supply_is_system_supplied);
@@ -147,6 +157,12 @@ struct power_supply *power_supply_get_by_name(char *name)
 }
 EXPORT_SYMBOL_GPL(power_supply_get_by_name);
 
+int power_supply_powers(struct power_supply *psy, struct device *dev)
+{
+	return sysfs_create_link(&psy->dev->kobj, &dev->kobj, "powers");
+}
+EXPORT_SYMBOL_GPL(power_supply_powers);
+
 static void power_supply_dev_release(struct device *dev)
 {
 	pr_debug("device: '%s': %s\n", dev_name(dev), __func__);
@@ -202,6 +218,7 @@ EXPORT_SYMBOL_GPL(power_supply_register);
 void power_supply_unregister(struct power_supply *psy)
 {
 	cancel_work_sync(&psy->changed_work);
+	sysfs_remove_link(&psy->dev->kobj, "powers");
 	power_supply_remove_triggers(psy);
 	device_unregister(psy->dev);
 }

drivers/power/power_supply_sysfs.c

@@ -43,7 +43,7 @@ static ssize_t power_supply_show_property(struct device *dev,
 					  struct device_attribute *attr,
 					  char *buf) {
 	static char *type_text[] = {
-		"Battery", "UPS", "Mains", "USB",
+		"Unknown", "Battery", "UPS", "Mains", "USB",
 		"USB_DCP", "USB_CDP", "USB_ACA"
 	};
 	static char *status_text[] = {
@@ -63,6 +63,9 @@ static ssize_t power_supply_show_property(struct device *dev,
 	static char *capacity_level_text[] = {
 		"Unknown", "Critical", "Low", "Normal", "High", "Full"
 	};
+	static char *scope_text[] = {
+		"Unknown", "System", "Device"
+	};
 	ssize_t ret = 0;
 	struct power_supply *psy = dev_get_drvdata(dev);
 	const ptrdiff_t off = attr - power_supply_attrs;
@@ -78,8 +81,8 @@ static ssize_t power_supply_show_property(struct device *dev,
 			dev_dbg(dev, "driver has no data for `%s' property\n",
 				attr->attr.name);
 		else if (ret != -ENODEV)
-			dev_err(dev, "driver failed to report `%s' property\n",
-				attr->attr.name);
+			dev_err(dev, "driver failed to report `%s' property: %zd\n",
+				attr->attr.name, ret);
 		return ret;
 	}
 
@@ -95,6 +98,8 @@ static ssize_t power_supply_show_property(struct device *dev,
 		return sprintf(buf, "%s\n", capacity_level_text[value.intval]);
 	else if (off == POWER_SUPPLY_PROP_TYPE)
 		return sprintf(buf, "%s\n", type_text[value.intval]);
+	else if (off == POWER_SUPPLY_PROP_SCOPE)
+		return sprintf(buf, "%s\n", scope_text[value.intval]);
 	else if (off >= POWER_SUPPLY_PROP_MODEL_NAME)
 		return sprintf(buf, "%s\n", value.strval);
 
@@ -167,6 +172,7 @@ static struct device_attribute power_supply_attrs[] = {
 	POWER_SUPPLY_ATTR(time_to_full_now),
 	POWER_SUPPLY_ATTR(time_to_full_avg),
 	POWER_SUPPLY_ATTR(type),
+	POWER_SUPPLY_ATTR(scope),
 	/* Properties of type `const char *' */
 	POWER_SUPPLY_ATTR(model_name),
 	POWER_SUPPLY_ATTR(manufacturer),

drivers/power/s3c_adc_battery.c

@@ -47,6 +47,22 @@ static void s3c_adc_bat_ext_power_changed(struct power_supply *psy)
 		msecs_to_jiffies(JITTER_DELAY));
 }
 
+static int gather_samples(struct s3c_adc_client *client, int num, int channel)
+{
+	int value, i;
+
+	/* default to 1 if nothing is set */
+	if (num < 1)
+		num = 1;
+
+	value = 0;
+	for (i = 0; i < num; i++)
+		value += s3c_adc_read(client, channel);
+	value /= num;
+
+	return value;
+}
+
 static enum power_supply_property s3c_adc_backup_bat_props[] = {
 	POWER_SUPPLY_PROP_VOLTAGE_NOW,
 	POWER_SUPPLY_PROP_VOLTAGE_MIN,
@@ -67,7 +83,8 @@ static int s3c_adc_backup_bat_get_property(struct power_supply *psy,
 	if (bat->volt_value < 0 ||
 		jiffies_to_msecs(jiffies - bat->timestamp) >
 			BAT_POLL_INTERVAL) {
-		bat->volt_value = s3c_adc_read(bat->client,
+		bat->volt_value = gather_samples(bat->client,
+			bat->pdata->backup_volt_samples,
 			bat->pdata->backup_volt_channel);
 		bat->volt_value *= bat->pdata->backup_volt_mult;
 		bat->timestamp = jiffies;
@@ -139,9 +156,11 @@ static int s3c_adc_bat_get_property(struct power_supply *psy,
 	if (bat->volt_value < 0 || bat->cur_value < 0 ||
 		jiffies_to_msecs(jiffies - bat->timestamp) >
 			BAT_POLL_INTERVAL) {
-		bat->volt_value = s3c_adc_read(bat->client,
+		bat->volt_value = gather_samples(bat->client,
+			bat->pdata->volt_samples,
 			bat->pdata->volt_channel) * bat->pdata->volt_mult;
-		bat->cur_value = s3c_adc_read(bat->client,
+		bat->cur_value = gather_samples(bat->client,
+			bat->pdata->current_samples,
 			bat->pdata->current_channel) * bat->pdata->current_mult;
 		bat->timestamp = jiffies;
 	}
@@ -421,17 +440,7 @@ static struct platform_driver s3c_adc_bat_driver = {
 	.resume		= s3c_adc_bat_resume,
 };
 
-static int __init s3c_adc_bat_init(void)
-{
-	return platform_driver_register(&s3c_adc_bat_driver);
-}
-module_init(s3c_adc_bat_init);
-
-static void __exit s3c_adc_bat_exit(void)
-{
-	platform_driver_unregister(&s3c_adc_bat_driver);
-}
-module_exit(s3c_adc_bat_exit);
+module_platform_driver(s3c_adc_bat_driver);
 
 MODULE_AUTHOR("Vasily Khoruzhick <anarsoul@gmail.com>");
 MODULE_DESCRIPTION("iPAQ H1930/H1940/RX1950 battery controller driver");

drivers/power/wm831x_backup.c

@@ -226,17 +226,7 @@ static struct platform_driver wm831x_backup_driver = {
 	},
 };
 
-static int __init wm831x_backup_init(void)
-{
-	return platform_driver_register(&wm831x_backup_driver);
-}
-module_init(wm831x_backup_init);
-
-static void __exit wm831x_backup_exit(void)
-{
-	platform_driver_unregister(&wm831x_backup_driver);
-}
-module_exit(wm831x_backup_exit);
+module_platform_driver(wm831x_backup_driver);
 
 MODULE_DESCRIPTION("Backup battery charger driver for WM831x PMICs");
 MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");

drivers/power/wm8350_power.c

@@ -522,17 +522,7 @@ static struct platform_driver wm8350_power_driver = {
 	},
 };
 
-static int __init wm8350_power_init(void)
-{
-	return platform_driver_register(&wm8350_power_driver);
-}
-module_init(wm8350_power_init);
-
-static void __exit wm8350_power_exit(void)
-{
-	platform_driver_unregister(&wm8350_power_driver);
-}
-module_exit(wm8350_power_exit);
+module_platform_driver(wm8350_power_driver);
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("Power supply driver for WM8350");

include/linux/pda_power.h

@@ -35,6 +35,8 @@ struct pda_power_pdata {
 	unsigned int polling_interval; /* msecs, default is 2000 */
 
 	unsigned long ac_max_uA; /* current to draw when on AC */
+
+	bool use_otg_notifier;
 };
 
 #endif /* __PDA_POWER_H__ */