Commit b290c638 authored by Rafał Miłecki's avatar Rafał Miłecki Committed by Jakub Kicinski

net: dsa: b53: Drop BCM5301x workaround for a wrong CPU/IMP port

On BCM5301x port 8 requires a fixed link when used.

Years ago when b53 was an OpenWrt downstream driver (with configuration
based on sometimes bugged NVRAM) there was a need for a fixup. In case
of forcing fixed link for (incorrectly specified) port 5 the code had to
actually setup port 8 link.

For upstream b53 driver with setup based on DT there is no need for that
workaround. In DT we have and require correct ports setup.
Signed-off-by: default avatarRafał Miłecki <rafal@milecki.pl>
Reviewed-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Tested-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: default avatarJakub Kicinski <kuba@kernel.org>
parent 983d96a9
...@@ -1291,12 +1291,6 @@ static void b53_adjust_link(struct dsa_switch *ds, int port, ...@@ -1291,12 +1291,6 @@ static void b53_adjust_link(struct dsa_switch *ds, int port,
return; return;
} }
} }
} else if (is5301x(dev)) {
if (port != dev->cpu_port) {
b53_force_port_config(dev, dev->cpu_port, 2000,
DUPLEX_FULL, true, true);
b53_force_link(dev, dev->cpu_port, 1);
}
} }
/* Re-negotiate EEE if it was enabled already */ /* Re-negotiate EEE if it was enabled already */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment