ASoC: rt5640: Fix the issue of the abnormal JD2 status

The patch fixes the issue of the abnormal JD2 status.
Signed-off-by: Oder Chiou <oder_chiou@realtek.com>
Reported-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/20220912072931.1856-1-oder_chiou@realtek.comSigned-off-by: Mark Brown <broonie@kernel.org>

sound/soc/codecs/rt5640.c

@@ -2494,7 +2494,7 @@ static void rt5640_enable_jack_detect(struct snd_soc_component *component,
 
 	/* Select JD-source */
 	snd_soc_component_update_bits(component, RT5640_JD_CTRL,
-		RT5640_JD_MASK, rt5640->jd_src);
+		RT5640_JD_MASK, rt5640->jd_src << RT5640_JD_SFT);
 
 	/* Selecting GPIO01 as an interrupt */
 	snd_soc_component_update_bits(component, RT5640_GPIO_CTRL1,
@@ -2504,12 +2504,8 @@ static void rt5640_enable_jack_detect(struct snd_soc_component *component,
 	snd_soc_component_update_bits(component, RT5640_GPIO_CTRL3,
 		RT5640_GP1_PF_MASK, RT5640_GP1_PF_OUT);
 
-	/* Enabling jd2 in general control 1 */
 	snd_soc_component_write(component, RT5640_DUMMY1, 0x3f41);
 
-	/* Enabling jd2 in general control 2 */
-	snd_soc_component_write(component, RT5640_DUMMY2, 0x4001);
-
 	rt5640_set_ovcd_params(component);
 
 	/*
@@ -2518,12 +2514,25 @@ static void rt5640_enable_jack_detect(struct snd_soc_component *component,
 	 * pin 0/1 instead of it being stuck to 1. So we invert the JD polarity
 	 * on systems where the hardware does not already do this.
 	 */
-	if (rt5640->jd_inverted)
-		snd_soc_component_write(component, RT5640_IRQ_CTRL1,
-					RT5640_IRQ_JD_NOR);
-	else
-		snd_soc_component_write(component, RT5640_IRQ_CTRL1,
-					RT5640_IRQ_JD_NOR | RT5640_JD_P_INV);
+	if (rt5640->jd_inverted) {
+		if (rt5640->jd_src == RT5640_JD_SRC_JD1_IN4P)
+			snd_soc_component_write(component, RT5640_IRQ_CTRL1,
+				RT5640_IRQ_JD_NOR);
+		else if (rt5640->jd_src == RT5640_JD_SRC_JD2_IN4N)
+			snd_soc_component_update_bits(component, RT5640_DUMMY2,
+				RT5640_IRQ_JD2_MASK | RT5640_JD2_MASK,
+				RT5640_IRQ_JD2_NOR | RT5640_JD2_EN);
+	} else {
+		if (rt5640->jd_src == RT5640_JD_SRC_JD1_IN4P)
+			snd_soc_component_write(component, RT5640_IRQ_CTRL1,
+				RT5640_IRQ_JD_NOR | RT5640_JD_P_INV);
+		else if (rt5640->jd_src == RT5640_JD_SRC_JD2_IN4N)
+			snd_soc_component_update_bits(component, RT5640_DUMMY2,
+				RT5640_IRQ_JD2_MASK | RT5640_JD2_P_MASK |
+				RT5640_JD2_MASK,
+				RT5640_IRQ_JD2_NOR | RT5640_JD2_P_INV |
+				RT5640_JD2_EN);
+	}
 
 	rt5640->jack = jack;
 	if (rt5640->jack->status & SND_JACK_MICROPHONE) {
@@ -2725,10 +2734,8 @@ static int rt5640_probe(struct snd_soc_component *component)
 
 	if (device_property_read_u32(component->dev,
 				     "realtek,jack-detect-source", &val) == 0) {
-		if (val <= RT5640_JD_SRC_GPIO4)
-			rt5640->jd_src = val << RT5640_JD_SFT;
-		else if (val == RT5640_JD_SRC_HDA_HEADER)
-			rt5640->jd_src = RT5640_JD_SRC_HDA_HEADER;
+		if (val <= RT5640_JD_SRC_HDA_HEADER)
+			rt5640->jd_src = val;
 		else
 			dev_warn(component->dev, "Warning: Invalid jack-detect-source value: %d, leaving jack-detect disabled\n",
 				 val);
@@ -2809,12 +2816,31 @@ static int rt5640_resume(struct snd_soc_component *component)
 	regcache_sync(rt5640->regmap);
 
 	if (rt5640->jack) {
-		if (rt5640->jd_src == RT5640_JD_SRC_HDA_HEADER)
+		if (rt5640->jd_src == RT5640_JD_SRC_HDA_HEADER) {
 			snd_soc_component_update_bits(component,
 				RT5640_DUMMY2, 0x1100, 0x1100);
-		else
-			snd_soc_component_write(component, RT5640_DUMMY2,
-				0x4001);
+		} else {
+			if (rt5640->jd_inverted) {
+				if (rt5640->jd_src == RT5640_JD_SRC_JD2_IN4N)
+					snd_soc_component_update_bits(
+						component, RT5640_DUMMY2,
+						RT5640_IRQ_JD2_MASK |
+						RT5640_JD2_MASK,
+						RT5640_IRQ_JD2_NOR |
+						RT5640_JD2_EN);
+
+			} else {
+				if (rt5640->jd_src == RT5640_JD_SRC_JD2_IN4N)
+					snd_soc_component_update_bits(
+						component, RT5640_DUMMY2,
+						RT5640_IRQ_JD2_MASK |
+						RT5640_JD2_P_MASK |
+						RT5640_JD2_MASK,
+						RT5640_IRQ_JD2_NOR |
+						RT5640_JD2_P_INV |
+						RT5640_JD2_EN);
+			}
+		}
 
 		queue_delayed_work(system_long_wq, &rt5640->jack_work, 0);
 	}

sound/soc/codecs/rt5640.h

@@ -1984,6 +1984,20 @@
 #define RT5640_M_MONO_ADC_R_SFT			12
 #define RT5640_MCLK_DET				(0x1 << 11)
 
+/* General Control 1 (0xfb) */
+#define RT5640_IRQ_JD2_MASK			(0x1 << 12)
+#define RT5640_IRQ_JD2_SFT			12
+#define RT5640_IRQ_JD2_BP			(0x0 << 12)
+#define RT5640_IRQ_JD2_NOR			(0x1 << 12)
+#define RT5640_JD2_P_MASK			(0x1 << 10)
+#define RT5640_JD2_P_SFT			10
+#define RT5640_JD2_P_NOR			(0x0 << 10)
+#define RT5640_JD2_P_INV			(0x1 << 10)
+#define RT5640_JD2_MASK				(0x1 << 8)
+#define RT5640_JD2_SFT				8
+#define RT5640_JD2_DIS				(0x0 << 8)
+#define RT5640_JD2_EN				(0x1 << 8)
+
 /* Codec Private Register definition */
 
 /* MIC Over current threshold scale factor (0x15) */