Commit b325e832 authored by Murali Karicheri's avatar Murali Karicheri Committed by Jonathan Corbet

ARM: keystone: add documentation for SoCs and EVMs

Currently there is no general documentation on Keystone SoCs in the
Linux Documentation folder of the source tree. This patch adds some
essential documentation with links to help users of Keystone Linux and
also provide links to existing documents where necessary.
Signed-off-by: default avatarMurali Karicheri <m-karicheri2@ti.com>
Signed-off-by: default avatarJonathan Corbet <corbet@lwn.net>
parent a4c6ebed
TI Keystone Linux Overview
--------------------------
Introduction
------------
Keystone range of SoCs are based on ARM Cortex-A15 MPCore Processors
and c66x DSP cores. This document describes essential information required
for users to run Linux on Keystone based EVMs from Texas Instruments.
Following SoCs & EVMs are currently supported:-
------------ K2HK SoC and EVM --------------------------------------------------
a.k.a Keystone 2 Hawking/Kepler SoC
TCI6636K2H & TCI6636K2K: See documentation at
http://www.ti.com/product/tci6638k2k
http://www.ti.com/product/tci6638k2h
EVM:
http://www.advantech.com/Support/TI-EVM/EVMK2HX_sd.aspx
------------ K2E SoC and EVM ---------------------------------------------------
a.k.a Keystone 2 Edison SoC
K2E - 66AK2E05: See documentation at
http://www.ti.com/product/66AK2E05/technicaldocuments
EVM:
https://www.einfochips.com/index.php/partnerships/texas-instruments/k2e-evm.html
------------ K2L SoC and EVM ---------------------------------------------------
a.k.a Keystone 2 Lamarr SoC
K2L - TCI6630K2L: See documentation at
http://www.ti.com/product/TCI6630K2L/technicaldocuments
EVM:
https://www.einfochips.com/index.php/partnerships/texas-instruments/k2l-evm.html
Configuration
-------------
All of the K2 SoCs/EVMs share a common defconfig, keystone_defconfig and same
image is used to boot on individual EVMs. The platform configuration is
specified through DTS. Following are the DTS used:-
K2HK EVM : k2hk-evm.dts
K2E EVM : k2e-evm.dts
K2L EVM : k2l-evm.dts
The device tree documentation for the keystone machines are located at
Documentation/devicetree/bindings/arm/keystone/keystone.txt
Known issues & workaround
-------------------------
Some of the device drivers used on keystone are re-used from that from
DaVinci and other TI SoCs. These device drivers may use clock APIs directly.
Some of the keystone specific drivers such as netcp uses run time power
management API instead to enable clock. As this API has limitations on
keystone, following workaround is needed to boot Linux.
Add 'clk_ignore_unused' to the bootargs env variable in u-boot. Otherwise
clock frameworks will try to disable clocks that are unused and disable
the hardware. This is because netcp related power domain and clock
domains are enabled in u-boot as run time power management API currently
doesn't enable clocks for netcp due to a limitation. This workaround is
expected to be removed in the future when proper API support becomes
available. Until then, this work around is needed.
Document Author
---------------
Murali Karicheri <m-karicheri2@ti.com>
Copyright 2015 Texas Instruments
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment