drm/i915/adlp: Require DPT FB CCS color planes to be 2MB aligned

All DPT FB color plane surface base addresses must be 2MB aligned. On
ADL_P this means that the offsets in CCS FB object must be also 2MB
aligned. Adjusting unaligned offsets for these FBs during commit time
(compensating with the x/y offsets) doesn't work, since the big
alignment would most probably lead to an x/y offset mismatch error
between the main and CCS planes.

We can overcome this limitation by remapping CCS FBs, so that each color
plane is at an aligned offset, leaving x/y for each plane unadjusted
during commit and so not causing an x/y mismatch error. However
remapping for CCS FBs will be done as a follow-up, so for now require
that user space allocates the FB obj with properly aligned planes.

v2: s/SZ_2M/512*4k/ for clarity. (Ville)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210524172703.2113058-1-imre.deak@intel.com

drivers/gpu/drm/i915/display/intel_fb.c

@@ -355,7 +355,16 @@ static int intel_fb_offset_to_xy(int *x, int *y,
 	unsigned int height;
 	u32 alignment;
 
-	if (DISPLAY_VER(i915) >= 12 &&
+	/*
+	 * All DPT color planes must be 512*4k aligned (the amount mapped by a
+	 * single DPT page). For ADL_P CCS FBs this only works by requiring
+	 * the allocated offsets to be 2MB aligned.  Once supoort to remap
+	 * such FBs is added we can remove this requirement, as then all the
+	 * planes can be remapped to an aligned offset.
+	 */
+	if (IS_ALDERLAKE_P(i915) && is_ccs_modifier(fb->modifier))
+		alignment = 512 * 4096;
+	else if (DISPLAY_VER(i915) >= 12 &&
 		 is_semiplanar_uv_plane(fb, color_plane))
 		alignment = intel_tile_row_size(fb, color_plane);
 	else if (fb->modifier != DRM_FORMAT_MOD_LINEAR)