Commit b3df895a authored by Sebastian Andrzej Siewior's avatar Sebastian Andrzej Siewior Committed by Kumar Gala

powerpc/kexec: Add support for FSL-BookE

This adds support kexec on FSL-BookE where the MMU can not be simply
switched off. The code borrows the initial MMU-setup code to create the
identical mapping mapping. The only difference to the original boot code
is the size of the mapping(s) and the executeable address.
The kexec code maps the first 2 GiB of memory in 256 MiB steps. This
should work also on e500v1 boxes.
SMP support is still not available.

(Kumar: Added minor change to build to ifdef CONFIG_PPC_STD_MMU_64 some
code that was PPC64 specific)
Signed-off-by: default avatarSebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: default avatarKumar Gala <galak@kernel.crashing.org>
parent 7c08ce71
...@@ -351,7 +351,7 @@ config ARCH_ENABLE_MEMORY_HOTREMOVE ...@@ -351,7 +351,7 @@ config ARCH_ENABLE_MEMORY_HOTREMOVE
config KEXEC config KEXEC
bool "kexec system call (EXPERIMENTAL)" bool "kexec system call (EXPERIMENTAL)"
depends on PPC_BOOK3S && EXPERIMENTAL depends on (PPC_BOOK3S || (FSL_BOOKE && !SMP)) && EXPERIMENTAL
help help
kexec is a system call that implements the ability to shutdown your kexec is a system call that implements the ability to shutdown your
current kernel, and to start another kernel. It is like a reboot current kernel, and to start another kernel. It is like a reboot
......
...@@ -2,6 +2,18 @@ ...@@ -2,6 +2,18 @@
#define _ASM_POWERPC_KEXEC_H #define _ASM_POWERPC_KEXEC_H
#ifdef __KERNEL__ #ifdef __KERNEL__
#ifdef CONFIG_FSL_BOOKE
/*
* On FSL-BookE we setup a 1:1 mapping which covers the first 2GiB of memory
* and therefore we can only deal with memory within this range
*/
#define KEXEC_SOURCE_MEMORY_LIMIT (2 * 1024 * 1024 * 1024UL)
#define KEXEC_DESTINATION_MEMORY_LIMIT (2 * 1024 * 1024 * 1024UL)
#define KEXEC_CONTROL_MEMORY_LIMIT (2 * 1024 * 1024 * 1024UL)
#else
/* /*
* Maximum page that is mapped directly into kernel memory. * Maximum page that is mapped directly into kernel memory.
* XXX: Since we copy virt we can use any page we allocate * XXX: Since we copy virt we can use any page we allocate
...@@ -21,6 +33,7 @@ ...@@ -21,6 +33,7 @@
/* TASK_SIZE, probably left over from use_mm ?? */ /* TASK_SIZE, probably left over from use_mm ?? */
#define KEXEC_CONTROL_MEMORY_LIMIT TASK_SIZE #define KEXEC_CONTROL_MEMORY_LIMIT TASK_SIZE
#endif #endif
#endif
#define KEXEC_CONTROL_PAGE_SIZE 4096 #define KEXEC_CONTROL_PAGE_SIZE 4096
......
...@@ -163,6 +163,7 @@ static void crash_kexec_prepare_cpus(int cpu) ...@@ -163,6 +163,7 @@ static void crash_kexec_prepare_cpus(int cpu)
} }
/* wait for all the CPUs to hit real mode but timeout if they don't come in */ /* wait for all the CPUs to hit real mode but timeout if they don't come in */
#ifdef CONFIG_PPC_STD_MMU_64
static void crash_kexec_wait_realmode(int cpu) static void crash_kexec_wait_realmode(int cpu)
{ {
unsigned int msecs; unsigned int msecs;
...@@ -187,6 +188,7 @@ static void crash_kexec_wait_realmode(int cpu) ...@@ -187,6 +188,7 @@ static void crash_kexec_wait_realmode(int cpu)
} }
mb(); mb();
} }
#endif
/* /*
* This function will be called by secondary cpus or by kexec cpu * This function will be called by secondary cpus or by kexec cpu
...@@ -445,7 +447,9 @@ void default_machine_crash_shutdown(struct pt_regs *regs) ...@@ -445,7 +447,9 @@ void default_machine_crash_shutdown(struct pt_regs *regs)
crash_kexec_prepare_cpus(crashing_cpu); crash_kexec_prepare_cpus(crashing_cpu);
cpu_set(crashing_cpu, cpus_in_crash); cpu_set(crashing_cpu, cpus_in_crash);
crash_kexec_stop_spus(); crash_kexec_stop_spus();
#ifdef CONFIG_PPC_STD_MMU_64
crash_kexec_wait_realmode(crashing_cpu); crash_kexec_wait_realmode(crashing_cpu);
#endif
if (ppc_md.kexec_cpu_down) if (ppc_md.kexec_cpu_down)
ppc_md.kexec_cpu_down(1, 0); ppc_md.kexec_cpu_down(1, 0);
} }
...@@ -159,6 +159,8 @@ skpinv: addi r6,r6,1 /* Increment */ ...@@ -159,6 +159,8 @@ skpinv: addi r6,r6,1 /* Increment */
#define M_IF_SMP 0 #define M_IF_SMP 0
#endif #endif
#if defined(ENTRY_MAPPING_BOOT_SETUP)
/* 6. Setup KERNELBASE mapping in TLB1[0] */ /* 6. Setup KERNELBASE mapping in TLB1[0] */
lis r6,0x1000 /* Set MAS0(TLBSEL) = TLB1(1), ESEL = 0 */ lis r6,0x1000 /* Set MAS0(TLBSEL) = TLB1(1), ESEL = 0 */
mtspr SPRN_MAS0,r6 mtspr SPRN_MAS0,r6
...@@ -174,6 +176,41 @@ skpinv: addi r6,r6,1 /* Increment */ ...@@ -174,6 +176,41 @@ skpinv: addi r6,r6,1 /* Increment */
/* 7. Jump to KERNELBASE mapping */ /* 7. Jump to KERNELBASE mapping */
lis r6,(KERNELBASE & ~0xfff)@h lis r6,(KERNELBASE & ~0xfff)@h
ori r6,r6,(KERNELBASE & ~0xfff)@l ori r6,r6,(KERNELBASE & ~0xfff)@l
#elif defined(ENTRY_MAPPING_KEXEC_SETUP)
/*
* 6. Setup a 1:1 mapping in TLB1. Esel 0 is unsued, 1 or 2 contains the tmp
* mapping so we start at 3. We setup 8 mappings, each 256MiB in size. This
* will cover the first 2GiB of memory.
*/
lis r10, (MAS1_VALID|MAS1_IPROT)@h
ori r10,r10, (MAS1_TSIZE(BOOK3E_PAGESZ_256M))@l
li r11, 0
li r0, 8
mtctr r0
next_tlb_setup:
addi r0, r11, 3
rlwinm r0, r0, 16, 4, 15 // Compute esel
rlwinm r9, r11, 28, 0, 3 // Compute [ER]PN
oris r0, r0, (MAS0_TLBSEL(1))@h
mtspr SPRN_MAS0,r0
mtspr SPRN_MAS1,r10
mtspr SPRN_MAS2,r9
ori r9, r9, (MAS3_SX|MAS3_SW|MAS3_SR)
mtspr SPRN_MAS3,r9
tlbwe
addi r11, r11, 1
bdnz+ next_tlb_setup
/* 7. Jump to our 1:1 mapping */
li r6, 0
#else
#error You need to specify the mapping or not use this at all.
#endif
lis r7,MSR_KERNEL@h lis r7,MSR_KERNEL@h
ori r7,r7,MSR_KERNEL@l ori r7,r7,MSR_KERNEL@l
bl 1f /* Find our address */ bl 1f /* Find our address */
......
...@@ -95,7 +95,9 @@ _ENTRY(_start); ...@@ -95,7 +95,9 @@ _ENTRY(_start);
_ENTRY(__early_start) _ENTRY(__early_start)
#define ENTRY_MAPPING_BOOT_SETUP
#include "fsl_booke_entry_mapping.S" #include "fsl_booke_entry_mapping.S"
#undef ENTRY_MAPPING_BOOT_SETUP
/* Establish the interrupt vector offsets */ /* Establish the interrupt vector offsets */
SET_IVOR(0, CriticalInput); SET_IVOR(0, CriticalInput);
......
...@@ -711,6 +711,22 @@ relocate_new_kernel: ...@@ -711,6 +711,22 @@ relocate_new_kernel:
/* r4 = reboot_code_buffer */ /* r4 = reboot_code_buffer */
/* r5 = start_address */ /* r5 = start_address */
#ifdef CONFIG_FSL_BOOKE
mr r29, r3
mr r30, r4
mr r31, r5
#define ENTRY_MAPPING_KEXEC_SETUP
#include "fsl_booke_entry_mapping.S"
#undef ENTRY_MAPPING_KEXEC_SETUP
mr r3, r29
mr r4, r30
mr r5, r31
li r0, 0
#else
li r0, 0 li r0, 0
/* /*
...@@ -727,6 +743,7 @@ relocate_new_kernel: ...@@ -727,6 +743,7 @@ relocate_new_kernel:
rfi rfi
1: 1:
#endif
/* from this point address translation is turned off */ /* from this point address translation is turned off */
/* and interrupts are disabled */ /* and interrupts are disabled */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment