Merge branch 'bpf_loop inlining'

Eduard Zingerman says:

====================

Hi Everyone,

This is the next iteration of the patch. It includes changes suggested
by Song, Joanne and Alexei. Please find updated intro message and
change log below.

This patch implements inlining of calls to bpf_loop helper function
when bpf_loop's callback is statically known. E.g. the rewrite does
the following transformation during BPF program processing:

  bpf_loop(10, foo, NULL, 0);

 ->

  for (int i = 0; i < 10; ++i)
    foo(i, NULL);

The transformation leads to measurable latency change for simple
loops. Measurements using `benchs/run_bench_bpf_loop.sh` inside QEMU /
KVM on i7-4710HQ CPU show a drop in latency from 14 ns/op to 2 ns/op.

The change is split in five parts:

* Update to test_verifier.c to specify expected and unexpected
  instruction sequences. This allows to check BPF program rewrites
  applied by e.g. do_mix_fixups function.

* Update to test_verifier.c to specify BTF function infos and types
  per test case. This is necessary for tests that load sub-program
  addresses to a variable because of the checks applied by
  check_ld_imm function.

* The update to verifier.c that tracks state of the parameters for
  each bpf_loop call in a program and decides whether it could be
  replaced by a loop.

* A set of test cases for `test_verifier` that use capabilities added
  by the first two patches to verify instructions produced by inlining
  logic.

* Two test cases for `test_prog` to check that possible corner cases
  behave as expected.

Additional details are available in commit messages for each patch.

Changes since v7:
 - Call to `mark_chain_precision` is added in `loop_flag_is_zero` to
   avoid potential issues with state pruning and precision tracking.
 - `flags non-zero` test_verifier test case is updated to have two
   execution paths reaching `bpf_loop` call, one with flags = 0,
   another with flags = 1. Potentially this test case should be able
   to show that call to `mark_chain_precision` is necessary in
   `loop_flag_is_zero` but not at the moment. Please refer to
   discussion for [PATCH bpf-next v7 3/5] for additional details.
 - `stack_depth_extra` computation is updated to guarantee that R6, R7
   and R8 offsets are always aligned on 8 byte boundary.
 - `stack locations for loop vars` test_verifier test case updated to
   show that R6, R7, R8 offsets are indeed aligned when function stack
   depth is not a multiple of 8.
 - I removed Song Liu's ACK from commit message for [PATCH bpf-next v8
   4/5] because I updated the patch. (Please let me know if I had to
   keep the ACK tag).

Changes since v6:
 - Return value of the `optimize_bpf_loop` function is no longer
   ignored. This is necessary to properly propagate -ENOMEM error.

Changes since v5:
 - Added function `loop_flag_is_zero` to skip a few checks in
   `update_loop_inline_state` when loop instruction is not fit for
   inline.

Changes since v4:
 - Added missing `static` modifier for `update_loop_inline_state` and
   `inline_bpf_loop` functions.
 - `update_loop_inline_state` updated for better readability.
 - Fields `initialized` and `fit_for_inline` of `struct
   bpf_loop_inline_state` are changed back from `bool` to bitfields.
 - Acks from Song Liu added to comments for patches 1/5, 2/5, 4/5,
   5/5.

Changes since v3:
 - Function `adjust_stack_depth_for_loop_inlining` is replaced by
   function `optimize_bpf_loop`. Function `optimize_bpf_loop` is
   responsible for both stack depth adjustment and call instruction
   replacement.
 - Changes in `do_misc_fixups` are reverted.
 - Changes in `adjust_subprog_starts_after_remove` are reverted and
   function `adjust_loop_inline_subprogno` is removed. This is
   possible because call to `optimize_bpf_loop` is placed before the
   dead code removal in `opt_remove_dead_code` (in contrast to the
   position of `do_misc_fixups` where inlining was done in v3).
 - Field `bpf_insn_aux_data.loop_inline_state` is now a part of
   anonymous union at the start of the `bpf_insn_aux_data`.
 - Data structure `bpf_loop_inline_state` is simplified to use single
   flag field `fit_for_inline` instead of separate fields
   `flags_is_zero` & `callback_is_constant`.
 - Macro definition `BPF_MAX_LOOPS` is moved from
   `include/linux/bpf_verifier.h` to `include/linux/bpf.h` to avoid
   include of `include/linux/bpf_verifier.h` in `bpf_iter.c`.
 - `inline_bpf_loop` changed back to use array initialization and hard
   coded offsets as in v2.
 - Style / formatting updates.

Changes since v2:
 - fix for `stack_check` test case in `test_progs-no_alu32`, all tests
   are passing now;
 - v2 3/3 patch is split in three parts:
   - kernel changes
   - test_verifier changes
   - test_prog changes
 - updated `inline_bpf_loop` in `verifier.c` to calculate each offset
   used in instructions to avoid "magic" numbers;
 - removed newline handling logic in `fail_log` branch of
   `do_single_test` in `test_verifier.c` to simplify the patch set;
 - styling fixes suggested in review for v2 of this patch set.

Changes since v1:
 - allow to use SKIP_INSNS in instruction pattern specification in
   test_verifier tests;
 - fix for a bug in spill offset assignement for loop vars when
   bpf_loop is located in a non-main function.
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

include/linux/bpf.h

@@ -1286,6 +1286,9 @@ struct bpf_array {
 #define BPF_COMPLEXITY_LIMIT_INSNS      1000000 /* yes. 1M insns */
 #define MAX_TAIL_CALL_CNT 33
 
+/* Maximum number of loops for bpf_loop */
+#define BPF_MAX_LOOPS	BIT(23)
+
 #define BPF_F_ACCESS_MASK	(BPF_F_RDONLY |		\
 				 BPF_F_RDONLY_PROG |	\
 				 BPF_F_WRONLY |		\

include/linux/bpf_verifier.h

@@ -344,6 +344,14 @@ struct bpf_verifier_state_list {
 	int miss_cnt, hit_cnt;
 };
 
+struct bpf_loop_inline_state {
+	int initialized:1; /* set to true upon first entry */
+	int fit_for_inline:1; /* true if callback function is the same
+			       * at each call and flags are always zero
+			       */
+	u32 callback_subprogno; /* valid when fit_for_inline is true */
+};
+
 /* Possible states for alu_state member. */
 #define BPF_ALU_SANITIZE_SRC		(1U << 0)
 #define BPF_ALU_SANITIZE_DST		(1U << 1)
@@ -373,6 +381,10 @@ struct bpf_insn_aux_data {
 				u32 mem_size;	/* mem_size for non-struct typed var */
 			};
 		} btf_var;
+		/* if instruction is a call to bpf_loop this field tracks
+		 * the state of the relevant registers to make decision about inlining
+		 */
+		struct bpf_loop_inline_state loop_inline_state;
 	};
 	u64 map_key_state; /* constant (32 bit) key tracking for maps */
 	int ctx_field_size; /* the ctx field size for load insn, maybe 0 */

kernel/bpf/bpf_iter.c

@@ -723,9 +723,6 @@ const struct bpf_func_proto bpf_for_each_map_elem_proto = {
 	.arg4_type	= ARG_ANYTHING,
 };
 
-/* maximum number of loops */
-#define MAX_LOOPS	BIT(23)
-
 BPF_CALL_4(bpf_loop, u32, nr_loops, void *, callback_fn, void *, callback_ctx,
 	   u64, flags)
 {
@@ -733,9 +730,13 @@ BPF_CALL_4(bpf_loop, u32, nr_loops, void *, callback_fn, void *, callback_ctx,
 	u64 ret;
 	u32 i;
 
+	/* Note: these safety checks are also verified when bpf_loop
+	 * is inlined, be careful to modify this code in sync. See
+	 * function verifier.c:inline_bpf_loop.
+	 */
 	if (flags)
 		return -EINVAL;
-	if (nr_loops > MAX_LOOPS)
+	if (nr_loops > BPF_MAX_LOOPS)
 		return -E2BIG;
 
 	for (i = 0; i < nr_loops; i++) {

kernel/bpf/verifier.c

@@ -7124,6 +7124,41 @@ static int check_get_func_ip(struct bpf_verifier_env *env)
 	return -ENOTSUPP;
 }
 
+static struct bpf_insn_aux_data *cur_aux(struct bpf_verifier_env *env)
+{
+	return &env->insn_aux_data[env->insn_idx];
+}
+
+static bool loop_flag_is_zero(struct bpf_verifier_env *env)
+{
+	struct bpf_reg_state *regs = cur_regs(env);
+	struct bpf_reg_state *reg = &regs[BPF_REG_4];
+	bool reg_is_null = register_is_null(reg);
+
+	if (reg_is_null)
+		mark_chain_precision(env, BPF_REG_4);
+
+	return reg_is_null;
+}
+
+static void update_loop_inline_state(struct bpf_verifier_env *env, u32 subprogno)
+{
+	struct bpf_loop_inline_state *state = &cur_aux(env)->loop_inline_state;
+
+	if (!state->initialized) {
+		state->initialized = 1;
+		state->fit_for_inline = loop_flag_is_zero(env);
+		state->callback_subprogno = subprogno;
+		return;
+	}
+
+	if (!state->fit_for_inline)
+		return;
+
+	state->fit_for_inline = (loop_flag_is_zero(env) &&
+				 state->callback_subprogno == subprogno);
+}
+
 static int check_helper_call(struct bpf_verifier_env *env, struct bpf_insn *insn,
 			     int *insn_idx_p)
 {
@@ -7276,6 +7311,7 @@ static int check_helper_call(struct bpf_verifier_env *env, struct bpf_insn *insn
 		err = check_bpf_snprintf_call(env, regs);
 		break;
 	case BPF_FUNC_loop:
+		update_loop_inline_state(env, meta.subprogno);
 		err = __check_func_call(env, insn, insn_idx_p, meta.subprogno,
 					set_loop_callback_state);
 		break;
@@ -7682,11 +7718,6 @@ static bool check_reg_sane_offset(struct bpf_verifier_env *env,
 	return true;
 }
 
-static struct bpf_insn_aux_data *cur_aux(struct bpf_verifier_env *env)
-{
-	return &env->insn_aux_data[env->insn_idx];
-}
-
 enum {
 	REASON_BOUNDS	= -1,
 	REASON_TYPE	= -2,
@@ -14315,6 +14346,142 @@ static int do_misc_fixups(struct bpf_verifier_env *env)
 	return 0;
 }
 
+static struct bpf_prog *inline_bpf_loop(struct bpf_verifier_env *env,
+					int position,
+					s32 stack_base,
+					u32 callback_subprogno,
+					u32 *cnt)
+{
+	s32 r6_offset = stack_base + 0 * BPF_REG_SIZE;
+	s32 r7_offset = stack_base + 1 * BPF_REG_SIZE;
+	s32 r8_offset = stack_base + 2 * BPF_REG_SIZE;
+	int reg_loop_max = BPF_REG_6;
+	int reg_loop_cnt = BPF_REG_7;
+	int reg_loop_ctx = BPF_REG_8;
+
+	struct bpf_prog *new_prog;
+	u32 callback_start;
+	u32 call_insn_offset;
+	s32 callback_offset;
+
+	/* This represents an inlined version of bpf_iter.c:bpf_loop,
+	 * be careful to modify this code in sync.
+	 */
+	struct bpf_insn insn_buf[] = {
+		/* Return error and jump to the end of the patch if
+		 * expected number of iterations is too big.
+		 */
+		BPF_JMP_IMM(BPF_JLE, BPF_REG_1, BPF_MAX_LOOPS, 2),
+		BPF_MOV32_IMM(BPF_REG_0, -E2BIG),
+		BPF_JMP_IMM(BPF_JA, 0, 0, 16),
+		/* spill R6, R7, R8 to use these as loop vars */
+		BPF_STX_MEM(BPF_DW, BPF_REG_10, BPF_REG_6, r6_offset),
+		BPF_STX_MEM(BPF_DW, BPF_REG_10, BPF_REG_7, r7_offset),
+		BPF_STX_MEM(BPF_DW, BPF_REG_10, BPF_REG_8, r8_offset),
+		/* initialize loop vars */
+		BPF_MOV64_REG(reg_loop_max, BPF_REG_1),
+		BPF_MOV32_IMM(reg_loop_cnt, 0),
+		BPF_MOV64_REG(reg_loop_ctx, BPF_REG_3),
+		/* loop header,
+		 * if reg_loop_cnt >= reg_loop_max skip the loop body
+		 */
+		BPF_JMP_REG(BPF_JGE, reg_loop_cnt, reg_loop_max, 5),
+		/* callback call,
+		 * correct callback offset would be set after patching
+		 */
+		BPF_MOV64_REG(BPF_REG_1, reg_loop_cnt),
+		BPF_MOV64_REG(BPF_REG_2, reg_loop_ctx),
+		BPF_CALL_REL(0),
+		/* increment loop counter */
+		BPF_ALU64_IMM(BPF_ADD, reg_loop_cnt, 1),
+		/* jump to loop header if callback returned 0 */
+		BPF_JMP_IMM(BPF_JEQ, BPF_REG_0, 0, -6),
+		/* return value of bpf_loop,
+		 * set R0 to the number of iterations
+		 */
+		BPF_MOV64_REG(BPF_REG_0, reg_loop_cnt),
+		/* restore original values of R6, R7, R8 */
+		BPF_LDX_MEM(BPF_DW, BPF_REG_6, BPF_REG_10, r6_offset),
+		BPF_LDX_MEM(BPF_DW, BPF_REG_7, BPF_REG_10, r7_offset),
+		BPF_LDX_MEM(BPF_DW, BPF_REG_8, BPF_REG_10, r8_offset),
+	};
+
+	*cnt = ARRAY_SIZE(insn_buf);
+	new_prog = bpf_patch_insn_data(env, position, insn_buf, *cnt);
+	if (!new_prog)
+		return new_prog;
+
+	/* callback start is known only after patching */
+	callback_start = env->subprog_info[callback_subprogno].start;
+	/* Note: insn_buf[12] is an offset of BPF_CALL_REL instruction */
+	call_insn_offset = position + 12;
+	callback_offset = callback_start - call_insn_offset - 1;
+	env->prog->insnsi[call_insn_offset].imm = callback_offset;
+
+	return new_prog;
+}
+
+static bool is_bpf_loop_call(struct bpf_insn *insn)
+{
+	return insn->code == (BPF_JMP | BPF_CALL) &&
+		insn->src_reg == 0 &&
+		insn->imm == BPF_FUNC_loop;
+}
+
+/* For all sub-programs in the program (including main) check
+ * insn_aux_data to see if there are bpf_loop calls that require
+ * inlining. If such calls are found the calls are replaced with a
+ * sequence of instructions produced by `inline_bpf_loop` function and
+ * subprog stack_depth is increased by the size of 3 registers.
+ * This stack space is used to spill values of the R6, R7, R8.  These
+ * registers are used to store the loop bound, counter and context
+ * variables.
+ */
+static int optimize_bpf_loop(struct bpf_verifier_env *env)
+{
+	struct bpf_subprog_info *subprogs = env->subprog_info;
+	int i, cur_subprog = 0, cnt, delta = 0;
+	struct bpf_insn *insn = env->prog->insnsi;
+	int insn_cnt = env->prog->len;
+	u16 stack_depth = subprogs[cur_subprog].stack_depth;
+	u16 stack_depth_roundup = round_up(stack_depth, 8) - stack_depth;
+	u16 stack_depth_extra = 0;
+
+	for (i = 0; i < insn_cnt; i++, insn++) {
+		struct bpf_loop_inline_state *inline_state =
+			&env->insn_aux_data[i + delta].loop_inline_state;
+
+		if (is_bpf_loop_call(insn) && inline_state->fit_for_inline) {
+			struct bpf_prog *new_prog;
+
+			stack_depth_extra = BPF_REG_SIZE * 3 + stack_depth_roundup;
+			new_prog = inline_bpf_loop(env,
+						   i + delta,
+						   -(stack_depth + stack_depth_extra),
+						   inline_state->callback_subprogno,
+						   &cnt);
+			if (!new_prog)
+				return -ENOMEM;
+
+			delta     += cnt - 1;
+			env->prog  = new_prog;
+			insn       = new_prog->insnsi + i + delta;
+		}
+
+		if (subprogs[cur_subprog + 1].start == i + delta + 1) {
+			subprogs[cur_subprog].stack_depth += stack_depth_extra;
+			cur_subprog++;
+			stack_depth = subprogs[cur_subprog].stack_depth;
+			stack_depth_roundup = round_up(stack_depth, 8) - stack_depth;
+			stack_depth_extra = 0;
+		}
+	}
+
+	env->prog->aux->stack_depth = env->subprog_info[0].stack_depth;
+
+	return 0;
+}
+
 static void free_states(struct bpf_verifier_env *env)
 {
 	struct bpf_verifier_state_list *sl, *sln;
@@ -15052,6 +15219,9 @@ int bpf_check(struct bpf_prog **prog, union bpf_attr *attr, bpfptr_t uattr)
 		ret = check_max_stack_depth(env);
 
 	/* instruction rewrites happen after this point */
+	if (ret == 0)
+		ret = optimize_bpf_loop(env);
+
 	if (is_priv) {
 		if (ret == 0)
 			opt_hard_wire_dead_code_branches(env);

tools/testing/selftests/bpf/prog_tests/bpf_loop.c

@@ -120,6 +120,64 @@ static void check_nested_calls(struct bpf_loop *skel)
 	bpf_link__destroy(link);
 }
 
+static void check_non_constant_callback(struct bpf_loop *skel)
+{
+	struct bpf_link *link =
+		bpf_program__attach(skel->progs.prog_non_constant_callback);
+
+	if (!ASSERT_OK_PTR(link, "link"))
+		return;
+
+	skel->bss->callback_selector = 0x0F;
+	usleep(1);
+	ASSERT_EQ(skel->bss->g_output, 0x0F, "g_output #1");
+
+	skel->bss->callback_selector = 0xF0;
+	usleep(1);
+	ASSERT_EQ(skel->bss->g_output, 0xF0, "g_output #2");
+
+	bpf_link__destroy(link);
+}
+
+static void check_stack(struct bpf_loop *skel)
+{
+	struct bpf_link *link = bpf_program__attach(skel->progs.stack_check);
+	const int max_key = 12;
+	int key;
+	int map_fd;
+
+	if (!ASSERT_OK_PTR(link, "link"))
+		return;
+
+	map_fd = bpf_map__fd(skel->maps.map1);
+
+	if (!ASSERT_GE(map_fd, 0, "bpf_map__fd"))
+		goto out;
+
+	for (key = 1; key <= max_key; ++key) {
+		int val = key;
+		int err = bpf_map_update_elem(map_fd, &key, &val, BPF_NOEXIST);
+
+		if (!ASSERT_OK(err, "bpf_map_update_elem"))
+			goto out;
+	}
+
+	usleep(1);
+
+	for (key = 1; key <= max_key; ++key) {
+		int val;
+		int err = bpf_map_lookup_elem(map_fd, &key, &val);
+
+		if (!ASSERT_OK(err, "bpf_map_lookup_elem"))
+			goto out;
+		if (!ASSERT_EQ(val, key + 1, "bad value in the map"))
+			goto out;
+	}
+
+out:
+	bpf_link__destroy(link);
+}
+
 void test_bpf_loop(void)
 {
 	struct bpf_loop *skel;
@@ -140,6 +198,10 @@ void test_bpf_loop(void)
 		check_invalid_flags(skel);
 	if (test__start_subtest("check_nested_calls"))
 		check_nested_calls(skel);
+	if (test__start_subtest("check_non_constant_callback"))
+		check_non_constant_callback(skel);
+	if (test__start_subtest("check_stack"))
+		check_stack(skel);
 
 	bpf_loop__destroy(skel);
 }

tools/testing/selftests/bpf/prog_tests/btf.c

@@ -34,7 +34,6 @@ static bool always_log;
 #undef CHECK
 #define CHECK(condition, format...) _CHECK(condition, "check", duration, format)
 
-#define BTF_END_RAW 0xdeadbeef
 #define NAME_TBD 0xdeadb33f
 
 #define NAME_NTH(N) (0xfffe0000 | N)

tools/testing/selftests/bpf/progs/bpf_loop.c

@@ -11,11 +11,19 @@ struct callback_ctx {
 	int output;
 };
 
+struct {
+	__uint(type, BPF_MAP_TYPE_HASH);
+	__uint(max_entries, 32);
+	__type(key, int);
+	__type(value, int);
+} map1 SEC(".maps");
+
 /* These should be set by the user program */
 u32 nested_callback_nr_loops;
 u32 stop_index = -1;
 u32 nr_loops;
 int pid;
+int callback_selector;
 
 /* Making these global variables so that the userspace program
  * can verify the output through the skeleton
@@ -111,3 +119,109 @@ int prog_nested_calls(void *ctx)
 
 	return 0;
 }
+
+static int callback_set_f0(int i, void *ctx)
+{
+	g_output = 0xF0;
+	return 0;
+}
+
+static int callback_set_0f(int i, void *ctx)
+{
+	g_output = 0x0F;
+	return 0;
+}
+
+/*
+ * non-constant callback is a corner case for bpf_loop inline logic
+ */
+SEC("fentry/" SYS_PREFIX "sys_nanosleep")
+int prog_non_constant_callback(void *ctx)
+{
+	struct callback_ctx data = {};
+
+	if (bpf_get_current_pid_tgid() >> 32 != pid)
+		return 0;
+
+	int (*callback)(int i, void *ctx);
+
+	g_output = 0;
+
+	if (callback_selector == 0x0F)
+		callback = callback_set_0f;
+	else
+		callback = callback_set_f0;
+
+	bpf_loop(1, callback, NULL, 0);
+
+	return 0;
+}
+
+static int stack_check_inner_callback(void *ctx)
+{
+	return 0;
+}
+
+static int map1_lookup_elem(int key)
+{
+	int *val = bpf_map_lookup_elem(&map1, &key);
+
+	return val ? *val : -1;
+}
+
+static void map1_update_elem(int key, int val)
+{
+	bpf_map_update_elem(&map1, &key, &val, BPF_ANY);
+}
+
+static int stack_check_outer_callback(void *ctx)
+{
+	int a = map1_lookup_elem(1);
+	int b = map1_lookup_elem(2);
+	int c = map1_lookup_elem(3);
+	int d = map1_lookup_elem(4);
+	int e = map1_lookup_elem(5);
+	int f = map1_lookup_elem(6);
+
+	bpf_loop(1, stack_check_inner_callback, NULL, 0);
+
+	map1_update_elem(1, a + 1);
+	map1_update_elem(2, b + 1);
+	map1_update_elem(3, c + 1);
+	map1_update_elem(4, d + 1);
+	map1_update_elem(5, e + 1);
+	map1_update_elem(6, f + 1);
+
+	return 0;
+}
+
+/* Some of the local variables in stack_check and
+ * stack_check_outer_callback would be allocated on stack by
+ * compiler. This test should verify that stack content for these
+ * variables is preserved between calls to bpf_loop (might be an issue
+ * if loop inlining allocates stack slots incorrectly).
+ */
+SEC("fentry/" SYS_PREFIX "sys_nanosleep")
+int stack_check(void *ctx)
+{
+	if (bpf_get_current_pid_tgid() >> 32 != pid)
+		return 0;
+
+	int a = map1_lookup_elem(7);
+	int b = map1_lookup_elem(8);
+	int c = map1_lookup_elem(9);
+	int d = map1_lookup_elem(10);
+	int e = map1_lookup_elem(11);
+	int f = map1_lookup_elem(12);
+
+	bpf_loop(1, stack_check_outer_callback, NULL, 0);
+
+	map1_update_elem(7,  a + 1);
+	map1_update_elem(8, b + 1);
+	map1_update_elem(9, c + 1);
+	map1_update_elem(10, d + 1);
+	map1_update_elem(11, e + 1);
+	map1_update_elem(12, f + 1);
+
+	return 0;
+}

tools/testing/selftests/bpf/test_btf.h

@@ -4,6 +4,8 @@
 #ifndef _TEST_BTF_H
 #define _TEST_BTF_H
 
+#define BTF_END_RAW 0xdeadbeef
+
 #define BTF_INFO_ENC(kind, kind_flag, vlen)			\
 	((!!(kind_flag) << 31) | ((kind) << 24) | ((vlen) & BTF_MAX_VLEN))
 

tools/testing/selftests/bpf/test_verifier.c

@@ -51,12 +51,24 @@
 #endif
 
 #define MAX_INSNS	BPF_MAXINSNS
+#define MAX_EXPECTED_INSNS	32
+#define MAX_UNEXPECTED_INSNS	32
 #define MAX_TEST_INSNS	1000000
 #define MAX_FIXUPS	8
 #define MAX_NR_MAPS	23
 #define MAX_TEST_RUNS	8
 #define POINTER_VALUE	0xcafe4all
 #define TEST_DATA_LEN	64
+#define MAX_FUNC_INFOS	8
+#define MAX_BTF_STRINGS	256
+#define MAX_BTF_TYPES	256
+
+#define INSN_OFF_MASK	((__s16)0xFFFF)
+#define INSN_IMM_MASK	((__s32)0xFFFFFFFF)
+#define SKIP_INSNS()	BPF_RAW_INSN(0xde, 0xa, 0xd, 0xbeef, 0xdeadbeef)
+
+#define DEFAULT_LIBBPF_LOG_LEVEL	4
+#define VERBOSE_LIBBPF_LOG_LEVEL	1
 
 #define F_NEEDS_EFFICIENT_UNALIGNED_ACCESS	(1 << 0)
 #define F_LOAD_WITH_STRICT_ALIGNMENT		(1 << 1)
@@ -79,6 +91,23 @@ struct bpf_test {
 	const char *descr;
 	struct bpf_insn	insns[MAX_INSNS];
 	struct bpf_insn	*fill_insns;
+	/* If specified, test engine looks for this sequence of
+	 * instructions in the BPF program after loading. Allows to
+	 * test rewrites applied by verifier.  Use values
+	 * INSN_OFF_MASK and INSN_IMM_MASK to mask `off` and `imm`
+	 * fields if content does not matter.  The test case fails if
+	 * specified instructions are not found.
+	 *
+	 * The sequence could be split into sub-sequences by adding
+	 * SKIP_INSNS instruction at the end of each sub-sequence. In
+	 * such case sub-sequences are searched for one after another.
+	 */
+	struct bpf_insn expected_insns[MAX_EXPECTED_INSNS];
+	/* If specified, test engine applies same pattern matching
+	 * logic as for `expected_insns`. If the specified pattern is
+	 * matched test case is marked as failed.
+	 */
+	struct bpf_insn unexpected_insns[MAX_UNEXPECTED_INSNS];
 	int fixup_map_hash_8b[MAX_FIXUPS];
 	int fixup_map_hash_48b[MAX_FIXUPS];
 	int fixup_map_hash_16b[MAX_FIXUPS];
@@ -135,6 +164,14 @@ struct bpf_test {
 	};
 	enum bpf_attach_type expected_attach_type;
 	const char *kfunc;
+	struct bpf_func_info func_info[MAX_FUNC_INFOS];
+	int func_info_cnt;
+	char btf_strings[MAX_BTF_STRINGS];
+	/* A set of BTF types to load when specified,
+	 * use macro definitions from test_btf.h,
+	 * must end with BTF_END_RAW
+	 */
+	__u32 btf_types[MAX_BTF_TYPES];
 };
 
 /* Note we want this to be 64 bit aligned so that the end of our array is
@@ -664,34 +701,66 @@ static __u32 btf_raw_types[] = {
 	BTF_MEMBER_ENC(71, 13, 128), /* struct prog_test_member __kptr_ref *ptr; */
 };
 
-static int load_btf(void)
+static char bpf_vlog[UINT_MAX >> 8];
+
+static int load_btf_spec(__u32 *types, int types_len,
+			 const char *strings, int strings_len)
 {
 	struct btf_header hdr = {
 		.magic = BTF_MAGIC,
 		.version = BTF_VERSION,
 		.hdr_len = sizeof(struct btf_header),
-		.type_len = sizeof(btf_raw_types),
-		.str_off = sizeof(btf_raw_types),
-		.str_len = sizeof(btf_str_sec),
+		.type_len = types_len,
+		.str_off = types_len,
+		.str_len = strings_len,
 	};
 	void *ptr, *raw_btf;
 	int btf_fd;
+	LIBBPF_OPTS(bpf_btf_load_opts, opts,
+		    .log_buf = bpf_vlog,
+		    .log_size = sizeof(bpf_vlog),
+		    .log_level = (verbose
+				  ? VERBOSE_LIBBPF_LOG_LEVEL
+				  : DEFAULT_LIBBPF_LOG_LEVEL),
+	);
 
-	ptr = raw_btf = malloc(sizeof(hdr) + sizeof(btf_raw_types) +
-			       sizeof(btf_str_sec));
+	raw_btf = malloc(sizeof(hdr) + types_len + strings_len);
 
+	ptr = raw_btf;
 	memcpy(ptr, &hdr, sizeof(hdr));
 	ptr += sizeof(hdr);
-	memcpy(ptr, btf_raw_types, hdr.type_len);
+	memcpy(ptr, types, hdr.type_len);
 	ptr += hdr.type_len;
-	memcpy(ptr, btf_str_sec, hdr.str_len);
+	memcpy(ptr, strings, hdr.str_len);
 	ptr += hdr.str_len;
 
-	btf_fd = bpf_btf_load(raw_btf, ptr - raw_btf, NULL);
-	free(raw_btf);
+	btf_fd = bpf_btf_load(raw_btf, ptr - raw_btf, &opts);
 	if (btf_fd < 0)
-		return -1;
-	return btf_fd;
+		printf("Failed to load BTF spec: '%s'\n", strerror(errno));
+
+	free(raw_btf);
+
+	return btf_fd < 0 ? -1 : btf_fd;
+}
+
+static int load_btf(void)
+{
+	return load_btf_spec(btf_raw_types, sizeof(btf_raw_types),
+			     btf_str_sec, sizeof(btf_str_sec));
+}
+
+static int load_btf_for_test(struct bpf_test *test)
+{
+	int types_num = 0;
+
+	while (types_num < MAX_BTF_TYPES &&
+	       test->btf_types[types_num] != BTF_END_RAW)
+		++types_num;
+
+	int types_len = types_num * sizeof(test->btf_types[0]);
+
+	return load_btf_spec(test->btf_types, types_len,
+			     test->btf_strings, sizeof(test->btf_strings));
 }
 
 static int create_map_spin_lock(void)
@@ -770,8 +839,6 @@ static int create_map_kptr(void)
 	return fd;
 }
 
-static char bpf_vlog[UINT_MAX >> 8];
-
 static void do_test_fixup(struct bpf_test *test, enum bpf_prog_type prog_type,
 			  struct bpf_insn *prog, int *map_fds)
 {
@@ -1126,10 +1193,218 @@ static bool cmp_str_seq(const char *log, const char *exp)
 	return true;
 }
 
+static int get_xlated_program(int fd_prog, struct bpf_insn **buf, int *cnt)
+{
+	struct bpf_prog_info info = {};
+	__u32 info_len = sizeof(info);
+	__u32 xlated_prog_len;
+	__u32 buf_element_size = sizeof(struct bpf_insn);
+
+	if (bpf_obj_get_info_by_fd(fd_prog, &info, &info_len)) {
+		perror("bpf_obj_get_info_by_fd failed");
+		return -1;
+	}
+
+	xlated_prog_len = info.xlated_prog_len;
+	if (xlated_prog_len % buf_element_size) {
+		printf("Program length %d is not multiple of %d\n",
+		       xlated_prog_len, buf_element_size);
+		return -1;
+	}
+
+	*cnt = xlated_prog_len / buf_element_size;
+	*buf = calloc(*cnt, buf_element_size);
+	if (!buf) {
+		perror("can't allocate xlated program buffer");
+		return -ENOMEM;
+	}
+
+	bzero(&info, sizeof(info));
+	info.xlated_prog_len = xlated_prog_len;
+	info.xlated_prog_insns = (__u64)*buf;
+	if (bpf_obj_get_info_by_fd(fd_prog, &info, &info_len)) {
+		perror("second bpf_obj_get_info_by_fd failed");
+		goto out_free_buf;
+	}
+
+	return 0;
+
+out_free_buf:
+	free(*buf);
+	return -1;
+}
+
+static bool is_null_insn(struct bpf_insn *insn)
+{
+	struct bpf_insn null_insn = {};
+
+	return memcmp(insn, &null_insn, sizeof(null_insn)) == 0;
+}
+
+static bool is_skip_insn(struct bpf_insn *insn)
+{
+	struct bpf_insn skip_insn = SKIP_INSNS();
+
+	return memcmp(insn, &skip_insn, sizeof(skip_insn)) == 0;
+}
+
+static int null_terminated_insn_len(struct bpf_insn *seq, int max_len)
+{
+	int i;
+
+	for (i = 0; i < max_len; ++i) {
+		if (is_null_insn(&seq[i]))
+			return i;
+	}
+	return max_len;
+}
+
+static bool compare_masked_insn(struct bpf_insn *orig, struct bpf_insn *masked)
+{
+	struct bpf_insn orig_masked;
+
+	memcpy(&orig_masked, orig, sizeof(orig_masked));
+	if (masked->imm == INSN_IMM_MASK)
+		orig_masked.imm = INSN_IMM_MASK;
+	if (masked->off == INSN_OFF_MASK)
+		orig_masked.off = INSN_OFF_MASK;
+
+	return memcmp(&orig_masked, masked, sizeof(orig_masked)) == 0;
+}
+
+static int find_insn_subseq(struct bpf_insn *seq, struct bpf_insn *subseq,
+			    int seq_len, int subseq_len)
+{
+	int i, j;
+
+	if (subseq_len > seq_len)
+		return -1;
+
+	for (i = 0; i < seq_len - subseq_len + 1; ++i) {
+		bool found = true;
+
+		for (j = 0; j < subseq_len; ++j) {
+			if (!compare_masked_insn(&seq[i + j], &subseq[j])) {
+				found = false;
+				break;
+			}
+		}
+		if (found)
+			return i;
+	}
+
+	return -1;
+}
+
+static int find_skip_insn_marker(struct bpf_insn *seq, int len)
+{
+	int i;
+
+	for (i = 0; i < len; ++i)
+		if (is_skip_insn(&seq[i]))
+			return i;
+
+	return -1;
+}
+
+/* Return true if all sub-sequences in `subseqs` could be found in
+ * `seq` one after another. Sub-sequences are separated by a single
+ * nil instruction.
+ */
+static bool find_all_insn_subseqs(struct bpf_insn *seq, struct bpf_insn *subseqs,
+				  int seq_len, int max_subseqs_len)
+{
+	int subseqs_len = null_terminated_insn_len(subseqs, max_subseqs_len);
+
+	while (subseqs_len > 0) {
+		int skip_idx = find_skip_insn_marker(subseqs, subseqs_len);
+		int cur_subseq_len = skip_idx < 0 ? subseqs_len : skip_idx;
+		int subseq_idx = find_insn_subseq(seq, subseqs,
+						  seq_len, cur_subseq_len);
+
+		if (subseq_idx < 0)
+			return false;
+		seq += subseq_idx + cur_subseq_len;
+		seq_len -= subseq_idx + cur_subseq_len;
+		subseqs += cur_subseq_len + 1;
+		subseqs_len -= cur_subseq_len + 1;
+	}
+
+	return true;
+}
+
+static void print_insn(struct bpf_insn *buf, int cnt)
+{
+	int i;
+
+	printf("  addr  op d s off  imm\n");
+	for (i = 0; i < cnt; ++i) {
+		struct bpf_insn *insn = &buf[i];
+
+		if (is_null_insn(insn))
+			break;
+
+		if (is_skip_insn(insn))
+			printf("  ...\n");
+		else
+			printf("  %04x: %02x %1x %x %04hx %08x\n",
+			       i, insn->code, insn->dst_reg,
+			       insn->src_reg, insn->off, insn->imm);
+	}
+}
+
+static bool check_xlated_program(struct bpf_test *test, int fd_prog)
+{
+	struct bpf_insn *buf;
+	int cnt;
+	bool result = true;
+	bool check_expected = !is_null_insn(test->expected_insns);
+	bool check_unexpected = !is_null_insn(test->unexpected_insns);
+
+	if (!check_expected && !check_unexpected)
+		goto out;
+
+	if (get_xlated_program(fd_prog, &buf, &cnt)) {
+		printf("FAIL: can't get xlated program\n");
+		result = false;
+		goto out;
+	}
+
+	if (check_expected &&
+	    !find_all_insn_subseqs(buf, test->expected_insns,
+				   cnt, MAX_EXPECTED_INSNS)) {
+		printf("FAIL: can't find expected subsequence of instructions\n");
+		result = false;
+		if (verbose) {
+			printf("Program:\n");
+			print_insn(buf, cnt);
+			printf("Expected subsequence:\n");
+			print_insn(test->expected_insns, MAX_EXPECTED_INSNS);
+		}
+	}
+
+	if (check_unexpected &&
+	    find_all_insn_subseqs(buf, test->unexpected_insns,
+				  cnt, MAX_UNEXPECTED_INSNS)) {
+		printf("FAIL: found unexpected subsequence of instructions\n");
+		result = false;
+		if (verbose) {
+			printf("Program:\n");
+			print_insn(buf, cnt);
+			printf("Un-expected subsequence:\n");
+			print_insn(test->unexpected_insns, MAX_UNEXPECTED_INSNS);
+		}
+	}
+
+	free(buf);
+ out:
+	return result;
+}
+
 static void do_test_single(struct bpf_test *test, bool unpriv,
 			   int *passes, int *errors)
 {
-	int fd_prog, expected_ret, alignment_prevented_execution;
+	int fd_prog, btf_fd, expected_ret, alignment_prevented_execution;
 	int prog_len, prog_type = test->prog_type;
 	struct bpf_insn *prog = test->insns;
 	LIBBPF_OPTS(bpf_prog_load_opts, opts);
@@ -1141,8 +1416,10 @@ static void do_test_single(struct bpf_test *test, bool unpriv,
 	__u32 pflags;
 	int i, err;
 
+	fd_prog = -1;
 	for (i = 0; i < MAX_NR_MAPS; i++)
 		map_fds[i] = -1;
+	btf_fd = -1;
 
 	if (!prog_type)
 		prog_type = BPF_PROG_TYPE_SOCKET_FILTER;
@@ -1175,11 +1452,11 @@ static void do_test_single(struct bpf_test *test, bool unpriv,
 
 	opts.expected_attach_type = test->expected_attach_type;
 	if (verbose)
-		opts.log_level = 1;
+		opts.log_level = VERBOSE_LIBBPF_LOG_LEVEL;
 	else if (expected_ret == VERBOSE_ACCEPT)
 		opts.log_level = 2;
 	else
-		opts.log_level = 4;
+		opts.log_level = DEFAULT_LIBBPF_LOG_LEVEL;
 	opts.prog_flags = pflags;
 
 	if (prog_type == BPF_PROG_TYPE_TRACING && test->kfunc) {
@@ -1197,6 +1474,19 @@ static void do_test_single(struct bpf_test *test, bool unpriv,
 		opts.attach_btf_id = attach_btf_id;
 	}
 
+	if (test->btf_types[0] != 0) {
+		btf_fd = load_btf_for_test(test);
+		if (btf_fd < 0)
+			goto fail_log;
+		opts.prog_btf_fd = btf_fd;
+	}
+
+	if (test->func_info_cnt != 0) {
+		opts.func_info = test->func_info;
+		opts.func_info_cnt = test->func_info_cnt;
+		opts.func_info_rec_size = sizeof(test->func_info[0]);
+	}
+
 	opts.log_buf = bpf_vlog;
 	opts.log_size = sizeof(bpf_vlog);
 	fd_prog = bpf_prog_load(prog_type, NULL, "GPL", prog, prog_len, &opts);
@@ -1262,6 +1552,9 @@ static void do_test_single(struct bpf_test *test, bool unpriv,
 	if (verbose)
 		printf(", verifier log:\n%s", bpf_vlog);
 
+	if (!check_xlated_program(test, fd_prog))
+		goto fail_log;
+
 	run_errs = 0;
 	run_successes = 0;
 	if (!alignment_prevented_execution && fd_prog >= 0 && test->runs >= 0) {
@@ -1305,6 +1598,7 @@ static void do_test_single(struct bpf_test *test, bool unpriv,
 	if (test->fill_insns)
 		free(test->fill_insns);
 	close(fd_prog);
+	close(btf_fd);
 	for (i = 0; i < MAX_NR_MAPS; i++)
 		close(map_fds[i]);
 	sched_yield();

tools/testing/selftests/bpf/verifier/bpf_loop_inline.c

+#define BTF_TYPES \
+	.btf_strings = "\0int\0i\0ctx\0callback\0main\0", \
+	.btf_types = { \
+	/* 1: int   */ BTF_TYPE_INT_ENC(1, BTF_INT_SIGNED, 0, 32, 4), \
+	/* 2: int*  */ BTF_PTR_ENC(1), \
+	/* 3: void* */ BTF_PTR_ENC(0), \
+	/* 4: int __(void*) */ BTF_FUNC_PROTO_ENC(1, 1), \
+		BTF_FUNC_PROTO_ARG_ENC(7, 3), \
+	/* 5: int __(int, int*) */ BTF_FUNC_PROTO_ENC(1, 2), \
+		BTF_FUNC_PROTO_ARG_ENC(5, 1), \
+		BTF_FUNC_PROTO_ARG_ENC(7, 2), \
+	/* 6: main      */ BTF_FUNC_ENC(20, 4), \
+	/* 7: callback  */ BTF_FUNC_ENC(11, 5), \
+	BTF_END_RAW \
+	}
+
+#define MAIN_TYPE	6
+#define CALLBACK_TYPE	7
+
+/* can't use BPF_CALL_REL, jit_subprogs adjusts IMM & OFF
+ * fields for pseudo calls
+ */
+#define PSEUDO_CALL_INSN() \
+	BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, BPF_PSEUDO_CALL, \
+		     INSN_OFF_MASK, INSN_IMM_MASK)
+
+/* can't use BPF_FUNC_loop constant,
+ * do_mix_fixups adjusts the IMM field
+ */
+#define HELPER_CALL_INSN() \
+	BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, INSN_OFF_MASK, INSN_IMM_MASK)
+
+{
+	"inline simple bpf_loop call",
+	.insns = {
+	/* main */
+	/* force verifier state branching to verify logic on first and
+	 * subsequent bpf_loop insn processing steps
+	 */
+	BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0, BPF_FUNC_jiffies64),
+	BPF_JMP_IMM(BPF_JEQ, BPF_REG_0, 777, 2),
+	BPF_ALU64_IMM(BPF_MOV, BPF_REG_1, 1),
+	BPF_JMP_IMM(BPF_JA, 0, 0, 1),
+	BPF_ALU64_IMM(BPF_MOV, BPF_REG_1, 2),
+
+	BPF_RAW_INSN(BPF_LD | BPF_IMM | BPF_DW, BPF_REG_2, BPF_PSEUDO_FUNC, 0, 6),
+	BPF_RAW_INSN(0, 0, 0, 0, 0),
+	BPF_ALU64_IMM(BPF_MOV, BPF_REG_3, 0),
+	BPF_ALU64_IMM(BPF_MOV, BPF_REG_4, 0),
+	BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0, BPF_FUNC_loop),
+	BPF_ALU64_IMM(BPF_MOV, BPF_REG_0, 0),
+	BPF_EXIT_INSN(),
+	/* callback */
+	BPF_ALU64_IMM(BPF_MOV, BPF_REG_0, 1),
+	BPF_EXIT_INSN(),
+	},
+	.expected_insns = { PSEUDO_CALL_INSN() },
+	.unexpected_insns = { HELPER_CALL_INSN() },
+	.prog_type = BPF_PROG_TYPE_TRACEPOINT,
+	.result = ACCEPT,
+	.runs = 0,
+	.func_info = { { 0, MAIN_TYPE }, { 12, CALLBACK_TYPE } },
+	.func_info_cnt = 2,
+	BTF_TYPES
+},
+{
+	"don't inline bpf_loop call, flags non-zero",
+	.insns = {
+	/* main */
+	BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0, BPF_FUNC_jiffies64),
+	BPF_ALU64_REG(BPF_MOV, BPF_REG_6, BPF_REG_0),
+	BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0, BPF_FUNC_jiffies64),
+	BPF_ALU64_REG(BPF_MOV, BPF_REG_7, BPF_REG_0),
+	BPF_JMP_IMM(BPF_JNE, BPF_REG_6, 0, 9),
+	BPF_ALU64_IMM(BPF_MOV, BPF_REG_4, 0),
+	BPF_JMP_IMM(BPF_JNE, BPF_REG_7, 0, 0),
+	BPF_ALU64_IMM(BPF_MOV, BPF_REG_1, 1),
+	BPF_RAW_INSN(BPF_LD | BPF_IMM | BPF_DW, BPF_REG_2, BPF_PSEUDO_FUNC, 0, 7),
+	BPF_RAW_INSN(0, 0, 0, 0, 0),
+	BPF_ALU64_IMM(BPF_MOV, BPF_REG_3, 0),
+	BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0, BPF_FUNC_loop),
+	BPF_ALU64_IMM(BPF_MOV, BPF_REG_0, 0),
+	BPF_EXIT_INSN(),
+	BPF_ALU64_IMM(BPF_MOV, BPF_REG_4, 1),
+	BPF_JMP_IMM(BPF_JA, 0, 0, -10),
+	/* callback */
+	BPF_ALU64_IMM(BPF_MOV, BPF_REG_0, 1),
+	BPF_EXIT_INSN(),
+	},
+	.expected_insns = { HELPER_CALL_INSN() },
+	.unexpected_insns = { PSEUDO_CALL_INSN() },
+	.prog_type = BPF_PROG_TYPE_TRACEPOINT,
+	.result = ACCEPT,
+	.runs = 0,
+	.func_info = { { 0, MAIN_TYPE }, { 16, CALLBACK_TYPE } },
+	.func_info_cnt = 2,
+	BTF_TYPES
+},
+{
+	"don't inline bpf_loop call, callback non-constant",
+	.insns = {
+	/* main */
+	BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0, BPF_FUNC_jiffies64),
+	BPF_JMP_IMM(BPF_JEQ, BPF_REG_0, 777, 4), /* pick a random callback */
+
+	BPF_ALU64_IMM(BPF_MOV, BPF_REG_1, 1),
+	BPF_RAW_INSN(BPF_LD | BPF_IMM | BPF_DW, BPF_REG_2, BPF_PSEUDO_FUNC, 0, 10),
+	BPF_RAW_INSN(0, 0, 0, 0, 0),
+	BPF_JMP_IMM(BPF_JA, 0, 0, 3),
+
+	BPF_ALU64_IMM(BPF_MOV, BPF_REG_1, 1),
+	BPF_RAW_INSN(BPF_LD | BPF_IMM | BPF_DW, BPF_REG_2, BPF_PSEUDO_FUNC, 0, 8),
+	BPF_RAW_INSN(0, 0, 0, 0, 0),
+
+	BPF_ALU64_IMM(BPF_MOV, BPF_REG_3, 0),
+	BPF_ALU64_IMM(BPF_MOV, BPF_REG_4, 0),
+	BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0, BPF_FUNC_loop),
+	BPF_ALU64_IMM(BPF_MOV, BPF_REG_0, 0),
+	BPF_EXIT_INSN(),
+	/* callback */
+	BPF_ALU64_IMM(BPF_MOV, BPF_REG_0, 1),
+	BPF_EXIT_INSN(),
+	/* callback #2 */
+	BPF_ALU64_IMM(BPF_MOV, BPF_REG_0, 1),
+	BPF_EXIT_INSN(),
+	},
+	.expected_insns = { HELPER_CALL_INSN() },
+	.unexpected_insns = { PSEUDO_CALL_INSN() },
+	.prog_type = BPF_PROG_TYPE_TRACEPOINT,
+	.result = ACCEPT,
+	.runs = 0,
+	.func_info = {
+		{ 0, MAIN_TYPE },
+		{ 14, CALLBACK_TYPE },
+		{ 16, CALLBACK_TYPE }
+	},
+	.func_info_cnt = 3,
+	BTF_TYPES
+},
+{
+	"bpf_loop_inline and a dead func",
+	.insns = {
+	/* main */
+
+	/* A reference to callback #1 to make verifier count it as a func.
+	 * This reference is overwritten below and callback #1 is dead.
+	 */
+	BPF_RAW_INSN(BPF_LD | BPF_IMM | BPF_DW, BPF_REG_2, BPF_PSEUDO_FUNC, 0, 9),
+	BPF_RAW_INSN(0, 0, 0, 0, 0),
+	BPF_ALU64_IMM(BPF_MOV, BPF_REG_1, 1),
+	BPF_RAW_INSN(BPF_LD | BPF_IMM | BPF_DW, BPF_REG_2, BPF_PSEUDO_FUNC, 0, 8),
+	BPF_RAW_INSN(0, 0, 0, 0, 0),
+	BPF_ALU64_IMM(BPF_MOV, BPF_REG_3, 0),
+	BPF_ALU64_IMM(BPF_MOV, BPF_REG_4, 0),
+	BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0, BPF_FUNC_loop),
+	BPF_ALU64_IMM(BPF_MOV, BPF_REG_0, 0),
+	BPF_EXIT_INSN(),
+	/* callback */
+	BPF_ALU64_IMM(BPF_MOV, BPF_REG_0, 1),
+	BPF_EXIT_INSN(),
+	/* callback #2 */
+	BPF_ALU64_IMM(BPF_MOV, BPF_REG_0, 1),
+	BPF_EXIT_INSN(),
+	},
+	.expected_insns = { PSEUDO_CALL_INSN() },
+	.unexpected_insns = { HELPER_CALL_INSN() },
+	.prog_type = BPF_PROG_TYPE_TRACEPOINT,
+	.result = ACCEPT,
+	.runs = 0,
+	.func_info = {
+		{ 0, MAIN_TYPE },
+		{ 10, CALLBACK_TYPE },
+		{ 12, CALLBACK_TYPE }
+	},
+	.func_info_cnt = 3,
+	BTF_TYPES
+},
+{
+	"bpf_loop_inline stack locations for loop vars",
+	.insns = {
+	/* main */
+	BPF_ST_MEM(BPF_W, BPF_REG_10, -12, 0x77),
+	/* bpf_loop call #1 */
+	BPF_ALU64_IMM(BPF_MOV, BPF_REG_1, 1),
+	BPF_RAW_INSN(BPF_LD | BPF_IMM | BPF_DW, BPF_REG_2, BPF_PSEUDO_FUNC, 0, 22),
+	BPF_RAW_INSN(0, 0, 0, 0, 0),
+	BPF_ALU64_IMM(BPF_MOV, BPF_REG_3, 0),
+	BPF_ALU64_IMM(BPF_MOV, BPF_REG_4, 0),
+	BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0, BPF_FUNC_loop),
+	/* bpf_loop call #2 */
+	BPF_ALU64_IMM(BPF_MOV, BPF_REG_1, 2),
+	BPF_RAW_INSN(BPF_LD | BPF_IMM | BPF_DW, BPF_REG_2, BPF_PSEUDO_FUNC, 0, 16),
+	BPF_RAW_INSN(0, 0, 0, 0, 0),
+	BPF_ALU64_IMM(BPF_MOV, BPF_REG_3, 0),
+	BPF_ALU64_IMM(BPF_MOV, BPF_REG_4, 0),
+	BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0, BPF_FUNC_loop),
+	/* call func and exit */
+	BPF_CALL_REL(2),
+	BPF_ALU64_IMM(BPF_MOV, BPF_REG_0, 0),
+	BPF_EXIT_INSN(),
+	/* func */
+	BPF_ST_MEM(BPF_DW, BPF_REG_10, -32, 0x55),
+	BPF_ALU64_IMM(BPF_MOV, BPF_REG_1, 2),
+	BPF_RAW_INSN(BPF_LD | BPF_IMM | BPF_DW, BPF_REG_2, BPF_PSEUDO_FUNC, 0, 6),
+	BPF_RAW_INSN(0, 0, 0, 0, 0),
+	BPF_ALU64_IMM(BPF_MOV, BPF_REG_3, 0),
+	BPF_ALU64_IMM(BPF_MOV, BPF_REG_4, 0),
+	BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0, BPF_FUNC_loop),
+	BPF_ALU64_IMM(BPF_MOV, BPF_REG_0, 0),
+	BPF_EXIT_INSN(),
+	/* callback */
+	BPF_ALU64_IMM(BPF_MOV, BPF_REG_0, 1),
+	BPF_EXIT_INSN(),
+	},
+	.expected_insns = {
+	BPF_ST_MEM(BPF_W, BPF_REG_10, -12, 0x77),
+	SKIP_INSNS(),
+	BPF_STX_MEM(BPF_DW, BPF_REG_10, BPF_REG_6, -40),
+	BPF_STX_MEM(BPF_DW, BPF_REG_10, BPF_REG_7, -32),
+	BPF_STX_MEM(BPF_DW, BPF_REG_10, BPF_REG_8, -24),
+	SKIP_INSNS(),
+	/* offsets are the same as in the first call */
+	BPF_STX_MEM(BPF_DW, BPF_REG_10, BPF_REG_6, -40),
+	BPF_STX_MEM(BPF_DW, BPF_REG_10, BPF_REG_7, -32),
+	BPF_STX_MEM(BPF_DW, BPF_REG_10, BPF_REG_8, -24),
+	SKIP_INSNS(),
+	BPF_ST_MEM(BPF_DW, BPF_REG_10, -32, 0x55),
+	SKIP_INSNS(),
+	/* offsets differ from main because of different offset
+	 * in BPF_ST_MEM instruction
+	 */
+	BPF_STX_MEM(BPF_DW, BPF_REG_10, BPF_REG_6, -56),
+	BPF_STX_MEM(BPF_DW, BPF_REG_10, BPF_REG_7, -48),
+	BPF_STX_MEM(BPF_DW, BPF_REG_10, BPF_REG_8, -40),
+	},
+	.unexpected_insns = { HELPER_CALL_INSN() },
+	.prog_type = BPF_PROG_TYPE_TRACEPOINT,
+	.result = ACCEPT,
+	.func_info = {
+		{ 0, MAIN_TYPE },
+		{ 16, MAIN_TYPE },
+		{ 25, CALLBACK_TYPE },
+	},
+	.func_info_cnt = 3,
+	BTF_TYPES
+},
+
+#undef HELPER_CALL_INSN
+#undef PSEUDO_CALL_INSN
+#undef CALLBACK_TYPE
+#undef MAIN_TYPE
+#undef BTF_TYPES