wifi: ath11k: remap ce register space for IPQ5018

In IPQ5018 ce register space is moved out of wcss unlike
ipq8074 or ipq6018 and the space is not contiguous,
hence remap the CE registers to a new space to access them.

Register read/write is modified to check if the register to be written
falls in the CE register space and corresponding register is written.
Also adjust the interrupt register address to ce irq enable/disable.

Tested-on: IPQ5018 hw1.0 AHB WLAN.HK.2.6.0.1-00861-QCAHKSWPL_SILICONZ-1
Signed-off-by: Sriram R <quic_srirrama@quicinc.com>
Co-developed-by: Karthikeyan Kathirvel <quic_kathirve@quicinc.com>
Signed-off-by: Karthikeyan Kathirvel <quic_kathirve@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20221122132152.17771-5-quic_kathirve@quicinc.com

drivers/net/wireless/ath/ath11k/ahb.c

@@ -267,30 +267,42 @@ static void ath11k_ahb_clearbit32(struct ath11k_base *ab, u8 bit, u32 offset)
 static void ath11k_ahb_ce_irq_enable(struct ath11k_base *ab, u16 ce_id)
 {
 	const struct ce_attr *ce_attr;
+	const struct ce_ie_addr *ce_ie_addr = ab->hw_params.ce_ie_addr;
+	u32 ie1_reg_addr, ie2_reg_addr, ie3_reg_addr;
+
+	ie1_reg_addr = ce_ie_addr->ie1_reg_addr + ATH11K_CE_OFFSET(ab);
+	ie2_reg_addr = ce_ie_addr->ie2_reg_addr + ATH11K_CE_OFFSET(ab);
+	ie3_reg_addr = ce_ie_addr->ie3_reg_addr + ATH11K_CE_OFFSET(ab);
 
 	ce_attr = &ab->hw_params.host_ce_config[ce_id];
 	if (ce_attr->src_nentries)
-		ath11k_ahb_setbit32(ab, ce_id, CE_HOST_IE_ADDRESS);
+		ath11k_ahb_setbit32(ab, ce_id, ie1_reg_addr);
 
 	if (ce_attr->dest_nentries) {
-		ath11k_ahb_setbit32(ab, ce_id, CE_HOST_IE_2_ADDRESS);
+		ath11k_ahb_setbit32(ab, ce_id, ie2_reg_addr);
 		ath11k_ahb_setbit32(ab, ce_id + CE_HOST_IE_3_SHIFT,
-				    CE_HOST_IE_3_ADDRESS);
+				    ie3_reg_addr);
 	}
 }
 
 static void ath11k_ahb_ce_irq_disable(struct ath11k_base *ab, u16 ce_id)
 {
 	const struct ce_attr *ce_attr;
+	const struct ce_ie_addr *ce_ie_addr = ab->hw_params.ce_ie_addr;
+	u32 ie1_reg_addr, ie2_reg_addr, ie3_reg_addr;
+
+	ie1_reg_addr = ce_ie_addr->ie1_reg_addr + ATH11K_CE_OFFSET(ab);
+	ie2_reg_addr = ce_ie_addr->ie2_reg_addr + ATH11K_CE_OFFSET(ab);
+	ie3_reg_addr = ce_ie_addr->ie3_reg_addr + ATH11K_CE_OFFSET(ab);
 
 	ce_attr = &ab->hw_params.host_ce_config[ce_id];
 	if (ce_attr->src_nentries)
-		ath11k_ahb_clearbit32(ab, ce_id, CE_HOST_IE_ADDRESS);
+		ath11k_ahb_clearbit32(ab, ce_id, ie1_reg_addr);
 
 	if (ce_attr->dest_nentries) {
-		ath11k_ahb_clearbit32(ab, ce_id, CE_HOST_IE_2_ADDRESS);
+		ath11k_ahb_clearbit32(ab, ce_id, ie2_reg_addr);
 		ath11k_ahb_clearbit32(ab, ce_id + CE_HOST_IE_3_SHIFT,
-				      CE_HOST_IE_3_ADDRESS);
+				      ie3_reg_addr);
 	}
 }
 
@@ -1142,10 +1154,26 @@ static int ath11k_ahb_probe(struct platform_device *pdev)
 		goto err_core_free;
 	}
 
+	ab->mem_ce = ab->mem;
+
 	ret = ath11k_core_pre_init(ab);
 	if (ret)
 		goto err_core_free;
 
+	if (ab->hw_params.ce_remap) {
+		const struct ce_remap *ce_remap = ab->hw_params.ce_remap;
+		/* ce register space is moved out of wcss unlike ipq8074 or ipq6018
+		 * and the space is not contiguous, hence remapping the CE registers
+		 * to a new space for accessing them.
+		 */
+		ab->mem_ce = ioremap(ce_remap->base, ce_remap->size);
+		if (IS_ERR(ab->mem_ce)) {
+			dev_err(&pdev->dev, "ce ioremap error\n");
+			ret = -ENOMEM;
+			goto err_core_free;
+		}
+	}
+
 	ret = ath11k_ahb_setup_resources(ab);
 	if (ret)
 		goto err_core_free;
@@ -1236,6 +1264,10 @@ static void ath11k_ahb_free_resources(struct ath11k_base *ab)
 	ath11k_ahb_release_smp2p_handle(ab);
 	ath11k_ahb_fw_resource_deinit(ab);
 	ath11k_ce_free_pipes(ab);
+
+	if (ab->hw_params.ce_remap)
+		iounmap(ab->mem_ce);
+
 	ath11k_core_free(ab);
 	platform_set_drvdata(pdev, NULL);
 }

drivers/net/wireless/ath/ath11k/ce.h

@@ -49,6 +49,11 @@ void ath11k_ce_byte_swap(void *mem, u32 len);
 #define CE_HOST_IE_2_ADDRESS	0x00A18040
 #define CE_HOST_IE_3_ADDRESS	CE_HOST_IE_ADDRESS
 
+/* CE IE registers are different for IPQ5018 */
+#define CE_HOST_IPQ5018_IE_ADDRESS		0x0841804C
+#define CE_HOST_IPQ5018_IE_2_ADDRESS		0x08418050
+#define CE_HOST_IPQ5018_IE_3_ADDRESS		CE_HOST_IPQ5018_IE_ADDRESS
+
 #define CE_HOST_IE_3_SHIFT	0xC
 
 #define CE_RING_IDX_INCR(nentries_mask, idx) (((idx) + 1) & (nentries_mask))
@@ -84,6 +89,17 @@ struct ce_pipe_config {
 	__le32 reserved;
 };
 
+struct ce_ie_addr {
+	u32 ie1_reg_addr;
+	u32 ie2_reg_addr;
+	u32 ie3_reg_addr;
+};
+
+struct ce_remap {
+	u32 base;
+	u32 size;
+};
+
 struct ce_attr {
 	/* CE_ATTR_* values */
 	unsigned int flags;

drivers/net/wireless/ath/ath11k/core.c

@@ -54,6 +54,7 @@ static const struct ath11k_hw_params ath11k_hw_params[] = {
 		.target_ce_count = 11,
 		.svc_to_ce_map = ath11k_target_service_to_ce_map_wlan_ipq8074,
 		.svc_to_ce_map_len = 21,
+		.ce_ie_addr = &ath11k_ce_ie_addr_ipq8074,
 		.single_pdev_only = false,
 		.rxdma1_enable = true,
 		.num_rxmda_per_pdev = 1,
@@ -137,6 +138,7 @@ static const struct ath11k_hw_params ath11k_hw_params[] = {
 		.target_ce_count = 11,
 		.svc_to_ce_map = ath11k_target_service_to_ce_map_wlan_ipq6018,
 		.svc_to_ce_map_len = 19,
+		.ce_ie_addr = &ath11k_ce_ie_addr_ipq8074,
 		.single_pdev_only = false,
 		.rxdma1_enable = true,
 		.num_rxmda_per_pdev = 1,
@@ -218,6 +220,7 @@ static const struct ath11k_hw_params ath11k_hw_params[] = {
 		.target_ce_count = 9,
 		.svc_to_ce_map = ath11k_target_service_to_ce_map_wlan_qca6390,
 		.svc_to_ce_map_len = 14,
+		.ce_ie_addr = &ath11k_ce_ie_addr_ipq8074,
 		.single_pdev_only = true,
 		.rxdma1_enable = false,
 		.num_rxmda_per_pdev = 2,
@@ -301,6 +304,7 @@ static const struct ath11k_hw_params ath11k_hw_params[] = {
 		.target_ce_count = 9,
 		.svc_to_ce_map = ath11k_target_service_to_ce_map_wlan_qcn9074,
 		.svc_to_ce_map_len = 18,
+		.ce_ie_addr = &ath11k_ce_ie_addr_ipq8074,
 		.rxdma1_enable = true,
 		.num_rxmda_per_pdev = 1,
 		.rx_mac_buf_ring = false,
@@ -381,6 +385,7 @@ static const struct ath11k_hw_params ath11k_hw_params[] = {
 		.target_ce_count = 9,
 		.svc_to_ce_map = ath11k_target_service_to_ce_map_wlan_qca6390,
 		.svc_to_ce_map_len = 14,
+		.ce_ie_addr = &ath11k_ce_ie_addr_ipq8074,
 		.single_pdev_only = true,
 		.rxdma1_enable = false,
 		.num_rxmda_per_pdev = 2,
@@ -546,6 +551,7 @@ static const struct ath11k_hw_params ath11k_hw_params[] = {
 		.target_ce_count = 9,
 		.svc_to_ce_map = ath11k_target_service_to_ce_map_wlan_qca6390,
 		.svc_to_ce_map_len = 14,
+		.ce_ie_addr = &ath11k_ce_ie_addr_ipq8074,
 		.single_pdev_only = true,
 		.rxdma1_enable = false,
 		.num_rxmda_per_pdev = 1,
@@ -634,6 +640,8 @@ static const struct ath11k_hw_params ath11k_hw_params[] = {
 		.target_ce_count = TARGET_CE_CNT_5018,
 		.svc_to_ce_map = ath11k_target_service_to_ce_map_wlan_ipq5018,
 		.svc_to_ce_map_len = SVC_CE_MAP_LEN_5018,
+		.ce_ie_addr = &ath11k_ce_ie_addr_ipq5018,
+		.ce_remap = &ath11k_ce_remap_ipq5018,
 		.rxdma1_enable = true,
 		.num_rxmda_per_pdev = RXDMA_PER_PDEV_5018,
 		.rx_mac_buf_ring = false,

drivers/net/wireless/ath/ath11k/core.h

@@ -851,6 +851,7 @@ struct ath11k_base {
 	struct ath11k_dp dp;
 
 	void __iomem *mem;
+	void __iomem *mem_ce;
 	unsigned long mem_len;
 
 	struct {

drivers/net/wireless/ath/ath11k/hal.c

@@ -1220,16 +1220,20 @@ static int ath11k_hal_srng_create_config(struct ath11k_base *ab)
 	s->reg_start[1] = HAL_SEQ_WCSS_UMAC_TCL_REG + HAL_TCL_STATUS_RING_HP;
 
 	s = &hal->srng_config[HAL_CE_SRC];
-	s->reg_start[0] = HAL_SEQ_WCSS_UMAC_CE0_SRC_REG(ab) + HAL_CE_DST_RING_BASE_LSB;
-	s->reg_start[1] = HAL_SEQ_WCSS_UMAC_CE0_SRC_REG(ab) + HAL_CE_DST_RING_HP;
+	s->reg_start[0] = HAL_SEQ_WCSS_UMAC_CE0_SRC_REG(ab) + HAL_CE_DST_RING_BASE_LSB +
+		ATH11K_CE_OFFSET(ab);
+	s->reg_start[1] = HAL_SEQ_WCSS_UMAC_CE0_SRC_REG(ab) + HAL_CE_DST_RING_HP +
+		ATH11K_CE_OFFSET(ab);
 	s->reg_size[0] = HAL_SEQ_WCSS_UMAC_CE1_SRC_REG(ab) -
 		HAL_SEQ_WCSS_UMAC_CE0_SRC_REG(ab);
 	s->reg_size[1] = HAL_SEQ_WCSS_UMAC_CE1_SRC_REG(ab) -
 		HAL_SEQ_WCSS_UMAC_CE0_SRC_REG(ab);
 
 	s = &hal->srng_config[HAL_CE_DST];
-	s->reg_start[0] = HAL_SEQ_WCSS_UMAC_CE0_DST_REG(ab) + HAL_CE_DST_RING_BASE_LSB;
-	s->reg_start[1] = HAL_SEQ_WCSS_UMAC_CE0_DST_REG(ab) + HAL_CE_DST_RING_HP;
+	s->reg_start[0] = HAL_SEQ_WCSS_UMAC_CE0_DST_REG(ab) + HAL_CE_DST_RING_BASE_LSB +
+		ATH11K_CE_OFFSET(ab);
+	s->reg_start[1] = HAL_SEQ_WCSS_UMAC_CE0_DST_REG(ab) + HAL_CE_DST_RING_HP +
+		ATH11K_CE_OFFSET(ab);
 	s->reg_size[0] = HAL_SEQ_WCSS_UMAC_CE1_DST_REG(ab) -
 		HAL_SEQ_WCSS_UMAC_CE0_DST_REG(ab);
 	s->reg_size[1] = HAL_SEQ_WCSS_UMAC_CE1_DST_REG(ab) -
@@ -1237,8 +1241,9 @@ static int ath11k_hal_srng_create_config(struct ath11k_base *ab)
 
 	s = &hal->srng_config[HAL_CE_DST_STATUS];
 	s->reg_start[0] = HAL_SEQ_WCSS_UMAC_CE0_DST_REG(ab) +
-		HAL_CE_DST_STATUS_RING_BASE_LSB;
-	s->reg_start[1] = HAL_SEQ_WCSS_UMAC_CE0_DST_REG(ab) + HAL_CE_DST_STATUS_RING_HP;
+		HAL_CE_DST_STATUS_RING_BASE_LSB + ATH11K_CE_OFFSET(ab);
+	s->reg_start[1] = HAL_SEQ_WCSS_UMAC_CE0_DST_REG(ab) + HAL_CE_DST_STATUS_RING_HP +
+		ATH11K_CE_OFFSET(ab);
 	s->reg_size[0] = HAL_SEQ_WCSS_UMAC_CE1_DST_REG(ab) -
 		HAL_SEQ_WCSS_UMAC_CE0_DST_REG(ab);
 	s->reg_size[1] = HAL_SEQ_WCSS_UMAC_CE1_DST_REG(ab) -

drivers/net/wireless/ath/ath11k/hal.h

@@ -321,6 +321,10 @@ struct ath11k_base;
 #define HAL_WBM2SW_RELEASE_RING_BASE_MSB_RING_SIZE	0x000fffff
 #define HAL_RXDMA_RING_MAX_SIZE				0x0000ffff
 
+/* IPQ5018 ce registers */
+#define HAL_IPQ5018_CE_WFSS_REG_BASE		0x08400000
+#define HAL_IPQ5018_CE_SIZE			0x200000
+
 /* Add any other errors here and return them in
  * ath11k_hal_rx_desc_get_err().
  */
@@ -519,6 +523,7 @@ enum hal_srng_dir {
 #define HAL_SRNG_FLAGS_MSI_INTR			0x00020000
 #define HAL_SRNG_FLAGS_CACHED                   0x20000000
 #define HAL_SRNG_FLAGS_LMAC_RING		0x80000000
+#define HAL_SRNG_FLAGS_REMAP_CE_RING        0x10000000
 
 #define HAL_SRNG_TLV_HDR_TAG		GENMASK(9, 1)
 #define HAL_SRNG_TLV_HDR_LEN		GENMASK(25, 10)

drivers/net/wireless/ath/ath11k/hw.c

@@ -2163,6 +2163,23 @@ const struct service_to_pipe ath11k_target_service_to_ce_map_wlan_ipq5018[] = {
 	{ /* terminator entry */ }
 };
 
+const struct ce_ie_addr ath11k_ce_ie_addr_ipq8074 = {
+	.ie1_reg_addr = CE_HOST_IE_ADDRESS,
+	.ie2_reg_addr = CE_HOST_IE_2_ADDRESS,
+	.ie3_reg_addr = CE_HOST_IE_3_ADDRESS,
+};
+
+const struct ce_ie_addr ath11k_ce_ie_addr_ipq5018 = {
+	.ie1_reg_addr = CE_HOST_IPQ5018_IE_ADDRESS - HAL_IPQ5018_CE_WFSS_REG_BASE,
+	.ie2_reg_addr = CE_HOST_IPQ5018_IE_2_ADDRESS - HAL_IPQ5018_CE_WFSS_REG_BASE,
+	.ie3_reg_addr = CE_HOST_IPQ5018_IE_3_ADDRESS - HAL_IPQ5018_CE_WFSS_REG_BASE,
+};
+
+const struct ce_remap ath11k_ce_remap_ipq5018 = {
+	.base = HAL_IPQ5018_CE_WFSS_REG_BASE,
+	.size = HAL_IPQ5018_CE_SIZE,
+};
+
 const struct ath11k_hw_regs ipq8074_regs = {
 	/* SW2TCL(x) R0 ring configuration address */
 	.hal_tcl1_ring_base_lsb = 0x00000510,

drivers/net/wireless/ath/ath11k/hw.h

@@ -80,6 +80,8 @@
 #define ATH11K_M3_FILE			"m3.bin"
 #define ATH11K_REGDB_FILE_NAME		"regdb.bin"
 
+#define ATH11K_CE_OFFSET(ab)	(ab->mem_ce - ab->mem)
+
 enum ath11k_hw_rate_cck {
 	ATH11K_HW_RATE_CCK_LP_11M = 0,
 	ATH11K_HW_RATE_CCK_LP_5_5M,
@@ -158,6 +160,8 @@ struct ath11k_hw_params {
 	u32 target_ce_count;
 	const struct service_to_pipe *svc_to_ce_map;
 	u32 svc_to_ce_map_len;
+	const struct ce_ie_addr *ce_ie_addr;
+	const struct ce_remap *ce_remap;
 
 	bool single_pdev_only;
 
@@ -277,6 +281,11 @@ extern const struct ath11k_hw_ring_mask ath11k_hw_ring_mask_qca6390;
 extern const struct ath11k_hw_ring_mask ath11k_hw_ring_mask_qcn9074;
 extern const struct ath11k_hw_ring_mask ath11k_hw_ring_mask_wcn6750;
 
+extern const struct ce_ie_addr ath11k_ce_ie_addr_ipq8074;
+extern const struct ce_ie_addr ath11k_ce_ie_addr_ipq5018;
+
+extern const struct ce_remap ath11k_ce_remap_ipq5018;
+
 extern const struct ath11k_hw_hal_params ath11k_hw_hal_params_ipq8074;
 extern const struct ath11k_hw_hal_params ath11k_hw_hal_params_qca6390;
 extern const struct ath11k_hw_hal_params ath11k_hw_hal_params_wcn6750;

drivers/net/wireless/ath/ath11k/pci.c

@@ -543,6 +543,8 @@ static int ath11k_pci_claim(struct ath11k_pci *ab_pci, struct pci_dev *pdev)
 		goto clear_master;
 	}
 
+	ab->mem_ce = ab->mem;
+
 	ath11k_dbg(ab, ATH11K_DBG_BOOT, "boot pci_mem 0x%pK\n", ab->mem);
 	return 0;