Commit b4a31c94 authored by Haiying Wang's avatar Haiying Wang Committed by Kumar Gala

powerpc/85xx: Add UCC6 and UCC8 nodes in SGMII mode for MPC8569MDS

Signed-off-by: default avatarHaiying Wang <Haiying.Wang@freescale.com>
Signed-off-by: default avatarKumar Gala <galak@kernel.crashing.org>
parent 1a2eceaa
...@@ -24,6 +24,8 @@ aliases { ...@@ -24,6 +24,8 @@ aliases {
ethernet1 = &enet1; ethernet1 = &enet1;
ethernet2 = &enet2; ethernet2 = &enet2;
ethernet3 = &enet3; ethernet3 = &enet3;
ethernet5 = &enet5;
ethernet7 = &enet7;
pci1 = &pci1; pci1 = &pci1;
rapidio0 = &rio0; rapidio0 = &rio0;
}; };
...@@ -466,6 +468,37 @@ qe_phy3: ethernet-phy@03 { ...@@ -466,6 +468,37 @@ qe_phy3: ethernet-phy@03 {
reg = <0x3>; reg = <0x3>;
device_type = "ethernet-phy"; device_type = "ethernet-phy";
}; };
qe_phy5: ethernet-phy@04 {
interrupt-parent = <&mpic>;
reg = <0x04>;
device_type = "ethernet-phy";
};
qe_phy7: ethernet-phy@06 {
interrupt-parent = <&mpic>;
reg = <0x6>;
device_type = "ethernet-phy";
};
};
mdio@3520 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x3520 0x18>;
compatible = "fsl,ucc-mdio";
tbi0: tbi-phy@15 {
reg = <0x15>;
device_type = "tbi-phy";
};
};
mdio@3720 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x3720 0x38>;
compatible = "fsl,ucc-mdio";
tbi1: tbi-phy@17 {
reg = <0x17>;
device_type = "tbi-phy";
};
}; };
enet2: ucc@2200 { enet2: ucc@2200 {
...@@ -513,6 +546,36 @@ enet3: ucc@3200 { ...@@ -513,6 +546,36 @@ enet3: ucc@3200 {
phy-connection-type = "rgmii-id"; phy-connection-type = "rgmii-id";
}; };
enet5: ucc@3400 {
device_type = "network";
compatible = "ucc_geth";
cell-index = <6>;
reg = <0x3400 0x200>;
interrupts = <41>;
interrupt-parent = <&qeic>;
local-mac-address = [ 00 00 00 00 00 00 ];
rx-clock-name = "none";
tx-clock-name = "none";
tbi-handle = <&tbi0>;
phy-handle = <&qe_phy5>;
phy-connection-type = "sgmii";
};
enet7: ucc@3600 {
device_type = "network";
compatible = "ucc_geth";
cell-index = <8>;
reg = <0x3600 0x200>;
interrupts = <43>;
interrupt-parent = <&qeic>;
local-mac-address = [ 00 00 00 00 00 00 ];
rx-clock-name = "none";
tx-clock-name = "none";
tbi-handle = <&tbi1>;
phy-handle = <&qe_phy7>;
phy-connection-type = "sgmii";
};
muram@10000 { muram@10000 {
#address-cells = <1>; #address-cells = <1>;
#size-cells = <1>; #size-cells = <1>;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment