Merge branch 'r8169-add-support-for-RTL8125'

Heiner Kallweit says:

====================
r8169: add support for RTL8125

This series adds support for the 2.5Gbps chip RTl8125. It can be found
on PCIe network cards, and on an increasing number of consumer gaming
mainboards. Series is partially based on the r8125 vendor driver.
Tested with a Delock 89531 PCIe card against a Netgear GS110MX
Multi-Gig switch.
Firmware isn't strictly needed, but on some systems there may be
compatibility issues w/o firmware. Firmware has been submitted to
linux-firmware.

v2:
- split first patch into 6 smaller ones to facilitate bisecting
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/realtek/Kconfig

@@ -96,14 +96,19 @@ config 8139_OLD_RX_RESET
 	  old RX-reset behavior.  If unsure, say N.
 
 config R8169
-	tristate "Realtek 8169 gigabit ethernet support"
+	tristate "Realtek 8169/8168/8101/8125 ethernet support"
 	depends on PCI
 	select FW_LOADER
 	select CRC32
 	select PHYLIB
 	select REALTEK_PHY
 	---help---
-	  Say Y here if you have a Realtek 8169 PCI Gigabit Ethernet adapter.
+	  Say Y here if you have a Realtek Ethernet adapter belonging to
+	  the following families:
+	  RTL8169 Gigabit Ethernet
+	  RTL8168 Gigabit Ethernet
+	  RTL8101 Fast Ethernet
+	  RTL8125 2.5GBit Ethernet
 
 	  To compile this driver as a module, choose M here: the module
 	  will be called r8169.  This is recommended.