can: sja1000: fix handling on dt properties on little endian systems

commit 0443de5f upstream.

To get correct endianes on little endian cpus (like arm) while reading device
tree properties, this patch replaces of_get_property() with
of_property_read_u32(). While there use of_property_read_bool() for the
handling of the boolean "nxp,no-comparator-bypass" property.
Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

drivers/net/can/sja1000/sja1000_of_platform.c

@@ -94,8 +94,8 @@ static int __devinit sja1000_ofp_probe(struct platform_device *ofdev)
 	struct net_device *dev;
 	struct sja1000_priv *priv;
 	struct resource res;
-	const u32 *prop;
-	int err, irq, res_size, prop_size;
+	u32 prop;
+	int err, irq, res_size;
 	void __iomem *base;
 
 	err = of_address_to_resource(np, 0, &res);
@@ -136,27 +136,27 @@ static int __devinit sja1000_ofp_probe(struct platform_device *ofdev)
 	priv->read_reg = sja1000_ofp_read_reg;
 	priv->write_reg = sja1000_ofp_write_reg;
 
-	prop = of_get_property(np, "nxp,external-clock-frequency", &prop_size);
-	if (prop && (prop_size ==  sizeof(u32)))
-		priv->can.clock.freq = *prop / 2;
+	err = of_property_read_u32(np, "nxp,external-clock-frequency", &prop);
+	if (!err)
+		priv->can.clock.freq = prop / 2;
 	else
 		priv->can.clock.freq = SJA1000_OFP_CAN_CLOCK; /* default */
 
-	prop = of_get_property(np, "nxp,tx-output-mode", &prop_size);
-	if (prop && (prop_size == sizeof(u32)))
-		priv->ocr |= *prop & OCR_MODE_MASK;
+	err = of_property_read_u32(np, "nxp,tx-output-mode", &prop);
+	if (!err)
+		priv->ocr |= prop & OCR_MODE_MASK;
 	else
 		priv->ocr |= OCR_MODE_NORMAL; /* default */
 
-	prop = of_get_property(np, "nxp,tx-output-config", &prop_size);
-	if (prop && (prop_size == sizeof(u32)))
-		priv->ocr |= (*prop << OCR_TX_SHIFT) & OCR_TX_MASK;
+	err = of_property_read_u32(np, "nxp,tx-output-config", &prop);
+	if (!err)
+		priv->ocr |= (prop << OCR_TX_SHIFT) & OCR_TX_MASK;
 	else
 		priv->ocr |= OCR_TX0_PULLDOWN; /* default */
 
-	prop = of_get_property(np, "nxp,clock-out-frequency", &prop_size);
-	if (prop && (prop_size == sizeof(u32)) && *prop) {
-		u32 divider = priv->can.clock.freq * 2 / *prop;
+	err = of_property_read_u32(np, "nxp,clock-out-frequency", &prop);
+	if (!err && prop) {
+		u32 divider = priv->can.clock.freq * 2 / prop;
 
 		if (divider > 1)
 			priv->cdr |= divider / 2 - 1;
@@ -166,8 +166,7 @@ static int __devinit sja1000_ofp_probe(struct platform_device *ofdev)
 		priv->cdr |= CDR_CLK_OFF; /* default */
 	}
 
-	prop = of_get_property(np, "nxp,no-comparator-bypass", NULL);
-	if (!prop)
+	if (!of_property_read_bool(np, "nxp,no-comparator-bypass"))
 		priv->cdr |= CDR_CBP; /* default */
 
 	priv->irq_flags = IRQF_SHARED;