Commit b589da8b authored by Linus Walleij's avatar Linus Walleij Committed by Daniel Lezcano

clocksource/drivers/fttmr010: Switch to use TIMER2 src

This switches the clocksource to TIMER2 like the Moxart driver
does. Mainly to make it more similar to the Moxart/Aspeed driver
but also because it seems more neat to use the timers in order:
use timer 1, then timer 2.

Cc: Joel Stanley <joel@jms.id.au>
Tested-by: default avatarJonas Jensen <jonas.jensen@gmail.com>
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: default avatarDaniel Lezcano <daniel.lezcano@linaro.org>
parent d0d76d57
...@@ -49,9 +49,6 @@ ...@@ -49,9 +49,6 @@
#define TIMER_1_CR_UPDOWN BIT(9) #define TIMER_1_CR_UPDOWN BIT(9)
#define TIMER_2_CR_UPDOWN BIT(10) #define TIMER_2_CR_UPDOWN BIT(10)
#define TIMER_3_CR_UPDOWN BIT(11) #define TIMER_3_CR_UPDOWN BIT(11)
#define TIMER_DEFAULT_FLAGS (TIMER_1_CR_UPDOWN | \
TIMER_3_CR_ENABLE | \
TIMER_3_CR_UPDOWN)
#define TIMER_1_INT_MATCH1 BIT(0) #define TIMER_1_INT_MATCH1 BIT(0)
#define TIMER_1_INT_MATCH2 BIT(1) #define TIMER_1_INT_MATCH2 BIT(1)
...@@ -80,7 +77,7 @@ static inline struct fttmr010 *to_fttmr010(struct clock_event_device *evt) ...@@ -80,7 +77,7 @@ static inline struct fttmr010 *to_fttmr010(struct clock_event_device *evt)
static u64 notrace fttmr010_read_sched_clock(void) static u64 notrace fttmr010_read_sched_clock(void)
{ {
return readl(local_fttmr->base + TIMER3_COUNT); return readl(local_fttmr->base + TIMER2_COUNT);
} }
static int fttmr010_timer_set_next_event(unsigned long cycles, static int fttmr010_timer_set_next_event(unsigned long cycles,
...@@ -230,19 +227,21 @@ static int __init fttmr010_timer_init(struct device_node *np) ...@@ -230,19 +227,21 @@ static int __init fttmr010_timer_init(struct device_node *np)
*/ */
writel(TIMER_INT_ALL_MASK, fttmr010->base + TIMER_INTR_MASK); writel(TIMER_INT_ALL_MASK, fttmr010->base + TIMER_INTR_MASK);
writel(0, fttmr010->base + TIMER_INTR_STATE); writel(0, fttmr010->base + TIMER_INTR_STATE);
writel(TIMER_DEFAULT_FLAGS, fttmr010->base + TIMER_CR); /* Enable timer 1 count up, timer 2 count up */
writel((TIMER_1_CR_UPDOWN | TIMER_2_CR_ENABLE | TIMER_2_CR_UPDOWN),
fttmr010->base + TIMER_CR);
/* /*
* Setup free-running clocksource timer (interrupts * Setup free-running clocksource timer (interrupts
* disabled.) * disabled.)
*/ */
local_fttmr = fttmr010; local_fttmr = fttmr010;
writel(0, fttmr010->base + TIMER3_COUNT); writel(0, fttmr010->base + TIMER2_COUNT);
writel(0, fttmr010->base + TIMER3_LOAD); writel(0, fttmr010->base + TIMER2_LOAD);
writel(0, fttmr010->base + TIMER3_MATCH1); writel(0, fttmr010->base + TIMER2_MATCH1);
writel(0, fttmr010->base + TIMER3_MATCH2); writel(0, fttmr010->base + TIMER2_MATCH2);
clocksource_mmio_init(fttmr010->base + TIMER3_COUNT, clocksource_mmio_init(fttmr010->base + TIMER2_COUNT,
"FTTMR010-TIMER3", "FTTMR010-TIMER2",
fttmr010->tick_rate, fttmr010->tick_rate,
300, 32, clocksource_mmio_readl_up); 300, 32, clocksource_mmio_readl_up);
sched_clock_register(fttmr010_read_sched_clock, 32, sched_clock_register(fttmr010_read_sched_clock, 32,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment