Commit b601577d authored by Xiang Chen's avatar Xiang Chen Committed by Martin K. Petersen

scsi: hisi_sas: Add missing newlines

Newline is missing from some printk() statements. Add them.

Link: https://lore.kernel.org/r/1598958790-232272-8-git-send-email-john.garry@huawei.comSigned-off-by: default avatarXiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: default avatarJohn Garry <john.garry@huawei.com>
Signed-off-by: default avatarMartin K. Petersen <martin.petersen@oracle.com>
parent 981cc23e
......@@ -335,7 +335,7 @@ static int hisi_sas_dma_map(struct hisi_hba *hisi_hba,
}
if (*n_elem > HISI_SAS_SGE_PAGE_CNT) {
dev_err(dev, "task prep: n_elem(%d) > HISI_SAS_SGE_PAGE_CNT",
dev_err(dev, "task prep: n_elem(%d) > HISI_SAS_SGE_PAGE_CNT\n",
*n_elem);
rc = -EINVAL;
goto err_out_dma_unmap;
......
......@@ -752,7 +752,7 @@ static int hw_init_v1_hw(struct hisi_hba *hisi_hba)
rc = reset_hw_v1_hw(hisi_hba);
if (rc) {
dev_err(dev, "hisi_sas_reset_hw failed, rc=%d", rc);
dev_err(dev, "hisi_sas_reset_hw failed, rc=%d\n", rc);
return rc;
}
......@@ -1166,7 +1166,7 @@ static void slot_err_v1_hw(struct hisi_hba *hisi_hba,
case SAS_PROTOCOL_STP:
case SAS_PROTOCOL_SATA | SAS_PROTOCOL_STP:
{
dev_err(dev, "slot err: SATA/STP not supported");
dev_err(dev, "slot err: SATA/STP not supported\n");
}
break;
default:
......@@ -1218,35 +1218,35 @@ static void slot_complete_v1_hw(struct hisi_hba *hisi_hba,
u32 info_reg = hisi_sas_read32(hisi_hba, HGC_INVLD_DQE_INFO);
if (info_reg & HGC_INVLD_DQE_INFO_DQ_MSK)
dev_err(dev, "slot complete: [%d:%d] has dq IPTT err",
dev_err(dev, "slot complete: [%d:%d] has dq IPTT err\n",
slot->cmplt_queue, slot->cmplt_queue_slot);
if (info_reg & HGC_INVLD_DQE_INFO_TYPE_MSK)
dev_err(dev, "slot complete: [%d:%d] has dq type err",
dev_err(dev, "slot complete: [%d:%d] has dq type err\n",
slot->cmplt_queue, slot->cmplt_queue_slot);
if (info_reg & HGC_INVLD_DQE_INFO_FORCE_MSK)
dev_err(dev, "slot complete: [%d:%d] has dq force phy err",
dev_err(dev, "slot complete: [%d:%d] has dq force phy err\n",
slot->cmplt_queue, slot->cmplt_queue_slot);
if (info_reg & HGC_INVLD_DQE_INFO_PHY_MSK)
dev_err(dev, "slot complete: [%d:%d] has dq phy id err",
dev_err(dev, "slot complete: [%d:%d] has dq phy id err\n",
slot->cmplt_queue, slot->cmplt_queue_slot);
if (info_reg & HGC_INVLD_DQE_INFO_ABORT_MSK)
dev_err(dev, "slot complete: [%d:%d] has dq abort flag err",
dev_err(dev, "slot complete: [%d:%d] has dq abort flag err\n",
slot->cmplt_queue, slot->cmplt_queue_slot);
if (info_reg & HGC_INVLD_DQE_INFO_IPTT_OF_MSK)
dev_err(dev, "slot complete: [%d:%d] has dq IPTT or ICT err",
dev_err(dev, "slot complete: [%d:%d] has dq IPTT or ICT err\n",
slot->cmplt_queue, slot->cmplt_queue_slot);
if (info_reg & HGC_INVLD_DQE_INFO_SSP_ERR_MSK)
dev_err(dev, "slot complete: [%d:%d] has dq SSP frame type err",
dev_err(dev, "slot complete: [%d:%d] has dq SSP frame type err\n",
slot->cmplt_queue, slot->cmplt_queue_slot);
if (info_reg & HGC_INVLD_DQE_INFO_OFL_MSK)
dev_err(dev, "slot complete: [%d:%d] has dq order frame len err",
dev_err(dev, "slot complete: [%d:%d] has dq order frame len err\n",
slot->cmplt_queue, slot->cmplt_queue_slot);
ts->stat = SAS_OPEN_REJECT;
......@@ -1294,7 +1294,7 @@ static void slot_complete_v1_hw(struct hisi_hba *hisi_hba,
case SAS_PROTOCOL_SATA:
case SAS_PROTOCOL_STP:
case SAS_PROTOCOL_SATA | SAS_PROTOCOL_STP:
dev_err(dev, "slot complete: SATA/STP not supported");
dev_err(dev, "slot complete: SATA/STP not supported\n");
break;
default:
......@@ -1417,7 +1417,7 @@ static irqreturn_t int_bcast_v1_hw(int irq, void *p)
irq_value = hisi_sas_phy_read32(hisi_hba, phy_no, CHL_INT2);
if (!(irq_value & CHL_INT2_SL_RX_BC_ACK_MSK)) {
dev_err(dev, "bcast: irq_value = %x not set enable bit",
dev_err(dev, "bcast: irq_value = %x not set enable bit\n",
irq_value);
res = IRQ_NONE;
goto end;
......
......@@ -1382,7 +1382,7 @@ static int hw_init_v2_hw(struct hisi_hba *hisi_hba)
rc = reset_hw_v2_hw(hisi_hba);
if (rc) {
dev_err(dev, "hisi_sas_reset_hw failed, rc=%d", rc);
dev_err(dev, "hisi_sas_reset_hw failed, rc=%d\n", rc);
return rc;
}
......
......@@ -909,7 +909,7 @@ static int hw_init_v3_hw(struct hisi_hba *hisi_hba)
rc = reset_hw_v3_hw(hisi_hba);
if (rc) {
dev_err(dev, "hisi_sas_reset_hw failed, rc=%d", rc);
dev_err(dev, "hisi_sas_reset_hw failed, rc=%d\n", rc);
return rc;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment