Commit b65456b7 authored by Peter Ujfalusi's avatar Peter Ujfalusi Committed by Mark Brown

ASoC: SOF: ipc4-topology: Adjust the params based on DAI formats

Currently we only check the bit depth value among to DAI formats, but other
parameters might be constant, like number of channels and/or rate.

In capture we use the fe params as a reference to find the format and blob
which should be used, but in the path we can have components which can
handle expanding/narrowing number of channels or do a resample.

In these cases the topology is expected to have 'fixed' parameter for
channels/rates/bit depth and the conversion to the fe format is going to
be done within the path.

In practice this patch fixes issues like:
All DMIC formats are fixed four channels
We have a component which converts the four channel to stereo
FE is opened with 2 channel

Even if we have the correct bit depth format and blob (for four channel) we
will still be looking for stereo configurations, which will fail.

Note: the adjustment of params have switched order with the checking of
single bit depth (needed for the NHLT blob fallback support). This change
is non function, just that if the sof_ipc4_narrow_params_to_format() would
fail, there is no point of checking the single bit depth.
Signed-off-by: default avatarPeter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: default avatarPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: default avatarBard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: default avatarSeppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Reviewed-by: default avatarRanjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://msgid.link/r/20240530111918.21974-6-peter.ujfalusi@linux.intel.comSigned-off-by: default avatarMark Brown <broonie@kernel.org>
parent 2fcad03e
...@@ -1583,6 +1583,55 @@ bool sof_ipc4_copier_is_single_bitdepth(struct snd_sof_dev *sdev, ...@@ -1583,6 +1583,55 @@ bool sof_ipc4_copier_is_single_bitdepth(struct snd_sof_dev *sdev,
return true; return true;
} }
static int
sof_ipc4_adjust_params_to_dai_format(struct snd_sof_dev *sdev,
struct snd_pcm_hw_params *params,
struct sof_ipc4_pin_format *pin_fmts,
u32 pin_fmts_size)
{
u32 params_mask = BIT(SNDRV_PCM_HW_PARAM_RATE) |
BIT(SNDRV_PCM_HW_PARAM_CHANNELS) |
BIT(SNDRV_PCM_HW_PARAM_FORMAT);
struct sof_ipc4_audio_format *fmt;
u32 rate, channels, valid_bits;
int i;
fmt = &pin_fmts[0].audio_fmt;
rate = fmt->sampling_frequency;
channels = SOF_IPC4_AUDIO_FORMAT_CFG_CHANNELS_COUNT(fmt->fmt_cfg);
valid_bits = SOF_IPC4_AUDIO_FORMAT_CFG_V_BIT_DEPTH(fmt->fmt_cfg);
/* check if parameters in topology defined formats are the same */
for (i = 1; i < pin_fmts_size; i++) {
u32 val;
fmt = &pin_fmts[i].audio_fmt;
if (params_mask & BIT(SNDRV_PCM_HW_PARAM_RATE)) {
val = fmt->sampling_frequency;
if (val != rate)
params_mask &= ~BIT(SNDRV_PCM_HW_PARAM_RATE);
}
if (params_mask & BIT(SNDRV_PCM_HW_PARAM_CHANNELS)) {
val = SOF_IPC4_AUDIO_FORMAT_CFG_CHANNELS_COUNT(fmt->fmt_cfg);
if (val != channels)
params_mask &= ~BIT(SNDRV_PCM_HW_PARAM_CHANNELS);
}
if (params_mask & BIT(SNDRV_PCM_HW_PARAM_FORMAT)) {
val = SOF_IPC4_AUDIO_FORMAT_CFG_V_BIT_DEPTH(fmt->fmt_cfg);
if (val != valid_bits)
params_mask &= ~BIT(SNDRV_PCM_HW_PARAM_FORMAT);
}
}
if (params_mask)
return sof_ipc4_update_hw_params(sdev, params,
&pin_fmts[0].audio_fmt,
params_mask);
return 0;
}
static int static int
sof_ipc4_prepare_dai_copier(struct snd_sof_dev *sdev, struct snd_sof_dai *dai, sof_ipc4_prepare_dai_copier(struct snd_sof_dev *sdev, struct snd_sof_dai *dai,
struct snd_pcm_hw_params *params, int dir) struct snd_pcm_hw_params *params, int dir)
...@@ -1601,10 +1650,9 @@ sof_ipc4_prepare_dai_copier(struct snd_sof_dev *sdev, struct snd_sof_dai *dai, ...@@ -1601,10 +1650,9 @@ sof_ipc4_prepare_dai_copier(struct snd_sof_dev *sdev, struct snd_sof_dai *dai,
available_fmt = &ipc4_copier->available_fmt; available_fmt = &ipc4_copier->available_fmt;
/* /*
* If the copier on the DAI side supports only single bit depth then * Fixup the params based on the format parameters of the DAI. If any
* this depth (format) should be used to look for the NHLT blob (if * of the RATE, CHANNELS, bit depth is static among the formats then
* needed) and in case of capture this should be used for the input * narrow the params to only allow that specific parameter value.
* format lookup
*/ */
if (dir == SNDRV_PCM_STREAM_PLAYBACK) { if (dir == SNDRV_PCM_STREAM_PLAYBACK) {
pin_fmts = available_fmt->output_pin_fmts; pin_fmts = available_fmt->output_pin_fmts;
...@@ -1614,18 +1662,13 @@ sof_ipc4_prepare_dai_copier(struct snd_sof_dev *sdev, struct snd_sof_dai *dai, ...@@ -1614,18 +1662,13 @@ sof_ipc4_prepare_dai_copier(struct snd_sof_dev *sdev, struct snd_sof_dai *dai,
num_pin_fmts = available_fmt->num_input_formats; num_pin_fmts = available_fmt->num_input_formats;
} }
ret = sof_ipc4_adjust_params_to_dai_format(sdev, &dai_params, pin_fmts,
num_pin_fmts);
if (ret)
return ret;
single_bitdepth = sof_ipc4_copier_is_single_bitdepth(sdev, pin_fmts, single_bitdepth = sof_ipc4_copier_is_single_bitdepth(sdev, pin_fmts,
num_pin_fmts); num_pin_fmts);
/* Update the dai_params with the only supported format */
if (single_bitdepth) {
ret = sof_ipc4_update_hw_params(sdev, &dai_params,
&pin_fmts[0].audio_fmt,
BIT(SNDRV_PCM_HW_PARAM_FORMAT));
if (ret)
return ret;
}
ret = snd_sof_get_nhlt_endpoint_data(sdev, dai, single_bitdepth, ret = snd_sof_get_nhlt_endpoint_data(sdev, dai, single_bitdepth,
&dai_params, &dai_params,
ipc4_copier->dai_index, ipc4_copier->dai_index,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment