Merge tag 'pwm/for-4.9-rc1' of...

Merge tag 'pwm/for-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm

Pull pwm updates from Thierry Reding:
 "This set of changes contains support for PWM signal capture in the STi
  driver as well as support for the PWM controller found on Meson SoCs.
  There's also support added for the MediaTek MT2701 and SunXi H3 to the
  existing drivers.

  Other than that there's a fair set of miscellaneous cleanups and fixes
  across the board"

* tag 'pwm/for-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (24 commits)
  pwm: meson: Handle unknown ID values
  pwm: sti: Take the opportunity to conduct a little house keeping
  pwm: sti: It's now valid for number of PWM channels to be zero
  pwm: sti: Add PWM capture callback
  pwm: sti: Add support for PWM capture interrupts
  pwm: sti: Initialise PWM capture device data
  pwm: sti: Supply PWM Capture clock handling
  pwm: sti: Supply PWM capture register addresses and bit locations
  pwm: sti: Only request clock rate when needed
  pwm: sti: Reorganise register names in preparation for new functionality
  pwm: sti: Rename channel => device
  dt-bindings: pwm: sti: Update DT bindings for capture support
  pwm: lpc-18xx: use pwm_set_chip_data
  pwm: sunxi: Add H3 support
  pwm: Add support for Meson PWM Controller
  dt-bindings: pwm: Add bindings for Meson PWM Controller
  pwm: samsung: Fix to use lowest div for large enough modulation bits
  pwm: pwm-tipwmss: Remove all runtime PM gets/puts
  pwm: cros-ec: Add __packed to prevent padding
  pwm: Add MediaTek MT2701 display PWM driver support
  ...

Documentation/devicetree/bindings/pwm/pwm-meson.txt

+Amlogic Meson PWM Controller
+============================
+
+Required properties:
+- compatible: Shall contain "amlogic,meson8b-pwm" or "amlogic,meson-gxbb-pwm".
+- #pwm-cells: Should be 3. See pwm.txt in this directory for a description of
+  the cells format.
+
+Optional properties:
+- clocks: Could contain one or two parents clocks phandle for each of the two
+  PWM channels.
+- clock-names: Could contain at least the "clkin0" and/or "clkin1" names.
+
+Example:
+
+	pwm_ab: pwm@8550 {
+		compatible = "amlogic,meson-gxbb-pwm";
+		reg = <0x0 0x08550 0x0 0x10>;
+		#pwm-cells = <3>;
+		status = "disabled";
+		clocks = <&xtal>, <&xtal>;
+		clock-names = "clkin0", "clkin1";
+	}

Documentation/devicetree/bindings/pwm/pwm-mtk-disp.txt

@@ -2,8 +2,9 @@ MediaTek display PWM controller
 
 Required properties:
  - compatible: should be "mediatek,<name>-disp-pwm":
-   - "mediatek,mt8173-disp-pwm": found on mt8173 SoC.
+   - "mediatek,mt2701-disp-pwm": found on mt2701 SoC.
    - "mediatek,mt6595-disp-pwm": found on mt6595 SoC.
+   - "mediatek,mt8173-disp-pwm": found on mt8173 SoC.
  - reg: physical base address and length of the controller's registers.
  - #pwm-cells: must be 2. See pwm.txt in this directory for a description of
    the cell format.

Documentation/devicetree/bindings/pwm/pwm-st.txt

@@ -13,13 +13,14 @@ Required parameters:
 - pinctrl-0: 		List of phandles pointing to pin configuration nodes
 			for PWM module.
 			For Pinctrl properties, please refer to [1].
-- clock-names: 		Set to "pwm".
+- clock-names: 		Valid entries are "pwm" and/or "capture".
 - clocks: 		phandle of the clock used by the PWM module.
 			For Clk properties, please refer to [2].
+- interrupts:		IRQ for the Capture device
 
 Optional properties:
-- st,pwm-num-chan:	Number of available channels. If not passed, the driver
-			will consider single channel by default.
+- st,pwm-num-chan:	Number of available PWM channels.  Default is 0.
+- st,capture-num-chan:	Number of available Capture channels.  Default is 0.
 
 [1] Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
 [2] Documentation/devicetree/bindings/clock/clock-bindings.txt
@@ -38,4 +39,5 @@ pwm1: pwm@fe510000 {
 	clocks = <&clk_sysin>;
 	clock-names = "pwm";
 	st,pwm-num-chan = <4>;
+	st,capture-num-chan = <2>;
 };

Documentation/devicetree/bindings/pwm/pwm-sun4i.txt

@@ -6,6 +6,7 @@ Required properties:
     - "allwinner,sun5i-a10s-pwm"
     - "allwinner,sun5i-a13-pwm"
     - "allwinner,sun7i-a20-pwm"
+    - "allwinner,sun8i-h3-pwm"
   - reg: physical base address and length of the controller's registers
   - #pwm-cells: should be 3. See pwm.txt in this directory for a description of
     the cells format.

drivers/pwm/Kconfig

@@ -262,6 +262,15 @@ config PWM_LPSS_PLATFORM
 	  To compile this driver as a module, choose M here: the module
 	  will be called pwm-lpss-platform.
 
+config PWM_MESON
+	tristate "Amlogic Meson PWM driver"
+	depends on ARCH_MESON
+	help
+	  The platform driver for Amlogic Meson PWM controller.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-meson.
+
 config PWM_MTK_DISP
 	tristate "MediaTek display PWM driver"
 	depends on ARCH_MEDIATEK || COMPILE_TEST

drivers/pwm/Makefile

@@ -24,6 +24,7 @@ obj-$(CONFIG_PWM_LPC32XX)	+= pwm-lpc32xx.o
 obj-$(CONFIG_PWM_LPSS)		+= pwm-lpss.o
 obj-$(CONFIG_PWM_LPSS_PCI)	+= pwm-lpss-pci.o
 obj-$(CONFIG_PWM_LPSS_PLATFORM)	+= pwm-lpss-platform.o
+obj-$(CONFIG_PWM_MESON)		+= pwm-meson.o
 obj-$(CONFIG_PWM_MTK_DISP)	+= pwm-mtk-disp.o
 obj-$(CONFIG_PWM_MXS)		+= pwm-mxs.o
 obj-$(CONFIG_PWM_OMAP_DMTIMER)	+= pwm-omap-dmtimer.o

drivers/pwm/core.c

@@ -339,6 +339,8 @@ int pwmchip_remove(struct pwm_chip *chip)
 	unsigned int i;
 	int ret = 0;
 
+	pwmchip_sysfs_unexport_children(chip);
+
 	mutex_lock(&pwm_lock);
 
 	for (i = 0; i < chip->npwm; i++) {

drivers/pwm/pwm-berlin.c

@@ -16,6 +16,7 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/pwm.h>
+#include <linux/slab.h>
 
 #define BERLIN_PWM_EN			0x0
 #define  BERLIN_PWM_ENABLE		BIT(0)
@@ -27,6 +28,13 @@
 #define BERLIN_PWM_TCNT			0xc
 #define  BERLIN_PWM_MAX_TCNT		65535
 
+struct berlin_pwm_channel {
+	u32 enable;
+	u32 ctrl;
+	u32 duty;
+	u32 tcnt;
+};
+
 struct berlin_pwm_chip {
 	struct pwm_chip chip;
 	struct clk *clk;
@@ -55,6 +63,25 @@ static inline void berlin_pwm_writel(struct berlin_pwm_chip *chip,
 	writel_relaxed(value, chip->base + channel * 0x10 + offset);
 }
 
+static int berlin_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct berlin_pwm_channel *channel;
+
+	channel = kzalloc(sizeof(*channel), GFP_KERNEL);
+	if (!channel)
+		return -ENOMEM;
+
+	return pwm_set_chip_data(pwm, channel);
+}
+
+static void berlin_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct berlin_pwm_channel *channel = pwm_get_chip_data(pwm);
+
+	pwm_set_chip_data(pwm, NULL);
+	kfree(channel);
+}
+
 static int berlin_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm_dev,
 			     int duty_ns, int period_ns)
 {
@@ -137,6 +164,8 @@ static void berlin_pwm_disable(struct pwm_chip *chip,
 }
 
 static const struct pwm_ops berlin_pwm_ops = {
+	.request = berlin_pwm_request,
+	.free = berlin_pwm_free,
 	.config = berlin_pwm_config,
 	.set_polarity = berlin_pwm_set_polarity,
 	.enable = berlin_pwm_enable,
@@ -204,12 +233,67 @@ static int berlin_pwm_remove(struct platform_device *pdev)
 	return ret;
 }
 
+#ifdef CONFIG_PM_SLEEP
+static int berlin_pwm_suspend(struct device *dev)
+{
+	struct berlin_pwm_chip *pwm = dev_get_drvdata(dev);
+	unsigned int i;
+
+	for (i = 0; i < pwm->chip.npwm; i++) {
+		struct berlin_pwm_channel *channel;
+
+		channel = pwm_get_chip_data(&pwm->chip.pwms[i]);
+		if (!channel)
+			continue;
+
+		channel->enable = berlin_pwm_readl(pwm, i, BERLIN_PWM_ENABLE);
+		channel->ctrl = berlin_pwm_readl(pwm, i, BERLIN_PWM_CONTROL);
+		channel->duty = berlin_pwm_readl(pwm, i, BERLIN_PWM_DUTY);
+		channel->tcnt = berlin_pwm_readl(pwm, i, BERLIN_PWM_TCNT);
+	}
+
+	clk_disable_unprepare(pwm->clk);
+
+	return 0;
+}
+
+static int berlin_pwm_resume(struct device *dev)
+{
+	struct berlin_pwm_chip *pwm = dev_get_drvdata(dev);
+	unsigned int i;
+	int ret;
+
+	ret = clk_prepare_enable(pwm->clk);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < pwm->chip.npwm; i++) {
+		struct berlin_pwm_channel *channel;
+
+		channel = pwm_get_chip_data(&pwm->chip.pwms[i]);
+		if (!channel)
+			continue;
+
+		berlin_pwm_writel(pwm, i, channel->ctrl, BERLIN_PWM_CONTROL);
+		berlin_pwm_writel(pwm, i, channel->duty, BERLIN_PWM_DUTY);
+		berlin_pwm_writel(pwm, i, channel->tcnt, BERLIN_PWM_TCNT);
+		berlin_pwm_writel(pwm, i, channel->enable, BERLIN_PWM_ENABLE);
+	}
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(berlin_pwm_pm_ops, berlin_pwm_suspend,
+			 berlin_pwm_resume);
+
 static struct platform_driver berlin_pwm_driver = {
 	.probe = berlin_pwm_probe,
 	.remove = berlin_pwm_remove,
 	.driver = {
 		.name = "berlin-pwm",
 		.of_match_table = berlin_pwm_match,
+		.pm = &berlin_pwm_pm_ops,
 	},
 };
 module_platform_driver(berlin_pwm_driver);

drivers/pwm/pwm-cros-ec.c

@@ -38,7 +38,7 @@ static int cros_ec_pwm_set_duty(struct cros_ec_device *ec, u8 index, u16 duty)
 	struct {
 		struct cros_ec_command msg;
 		struct ec_params_pwm_set_duty params;
-	} buf;
+	} __packed buf;
 	struct ec_params_pwm_set_duty *params = &buf.params;
 	struct cros_ec_command *msg = &buf.msg;
 
@@ -65,7 +65,7 @@ static int __cros_ec_pwm_get_duty(struct cros_ec_device *ec, u8 index,
 			struct ec_params_pwm_get_duty params;
 			struct ec_response_pwm_get_duty resp;
 		};
-	} buf;
+	} __packed buf;
 	struct ec_params_pwm_get_duty *params = &buf.params;
 	struct ec_response_pwm_get_duty *resp = &buf.resp;
 	struct cros_ec_command *msg = &buf.msg;

drivers/pwm/pwm-lpc18xx-sct.c

@@ -413,14 +413,18 @@ static int lpc18xx_pwm_probe(struct platform_device *pdev)
 	}
 
 	for (i = 0; i < lpc18xx_pwm->chip.npwm; i++) {
+		struct lpc18xx_pwm_data *data;
+
 		pwm = &lpc18xx_pwm->chip.pwms[i];
-		pwm->chip_data = devm_kzalloc(lpc18xx_pwm->dev,
-					      sizeof(struct lpc18xx_pwm_data),
-					      GFP_KERNEL);
-		if (!pwm->chip_data) {
+
+		data = devm_kzalloc(lpc18xx_pwm->dev, sizeof(*data),
+				    GFP_KERNEL);
+		if (!data) {
 			ret = -ENOMEM;
 			goto remove_pwmchip;
 		}
+
+		pwm_set_chip_data(pwm, data);
 	}
 
 	platform_set_drvdata(pdev, lpc18xx_pwm);

drivers/pwm/pwm-meson.c

+/*
+ * This file is provided under a dual BSD/GPLv2 license.  When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright (c) 2016 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ * Copyright (C) 2014 Amlogic, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ * The full GNU General Public License is included in this distribution
+ * in the file called COPYING.
+ *
+ * BSD LICENSE
+ *
+ * Copyright (c) 2016 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ * Copyright (C) 2014 Amlogic, Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ *   * Redistributions of source code must retain the above copyright
+ *     notice, this list of conditions and the following disclaimer.
+ *   * Redistributions in binary form must reproduce the above copyright
+ *     notice, this list of conditions and the following disclaimer in
+ *     the documentation and/or other materials provided with the
+ *     distribution.
+ *   * Neither the name of Intel Corporation nor the names of its
+ *     contributors may be used to endorse or promote products derived
+ *     from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+
+#define REG_PWM_A		0x0
+#define REG_PWM_B		0x4
+#define PWM_HIGH_SHIFT		16
+
+#define REG_MISC_AB		0x8
+#define MISC_B_CLK_EN		BIT(23)
+#define MISC_A_CLK_EN		BIT(15)
+#define MISC_CLK_DIV_MASK	0x7f
+#define MISC_B_CLK_DIV_SHIFT	16
+#define MISC_A_CLK_DIV_SHIFT	8
+#define MISC_B_CLK_SEL_SHIFT	6
+#define MISC_A_CLK_SEL_SHIFT	4
+#define MISC_CLK_SEL_WIDTH	2
+#define MISC_B_EN		BIT(1)
+#define MISC_A_EN		BIT(0)
+
+static const unsigned int mux_reg_shifts[] = {
+	MISC_A_CLK_SEL_SHIFT,
+	MISC_B_CLK_SEL_SHIFT
+};
+
+struct meson_pwm_channel {
+	unsigned int hi;
+	unsigned int lo;
+	u8 pre_div;
+
+	struct pwm_state state;
+
+	struct clk *clk_parent;
+	struct clk_mux mux;
+	struct clk *clk;
+};
+
+struct meson_pwm_data {
+	const char * const *parent_names;
+};
+
+struct meson_pwm {
+	struct pwm_chip chip;
+	const struct meson_pwm_data *data;
+	void __iomem *base;
+	u8 inverter_mask;
+	spinlock_t lock;
+};
+
+static inline struct meson_pwm *to_meson_pwm(struct pwm_chip *chip)
+{
+	return container_of(chip, struct meson_pwm, chip);
+}
+
+static int meson_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct meson_pwm_channel *channel = pwm_get_chip_data(pwm);
+	struct device *dev = chip->dev;
+	int err;
+
+	if (!channel)
+		return -ENODEV;
+
+	if (channel->clk_parent) {
+		err = clk_set_parent(channel->clk, channel->clk_parent);
+		if (err < 0) {
+			dev_err(dev, "failed to set parent %s for %s: %d\n",
+				__clk_get_name(channel->clk_parent),
+				__clk_get_name(channel->clk), err);
+				return err;
+		}
+	}
+
+	err = clk_prepare_enable(channel->clk);
+	if (err < 0) {
+		dev_err(dev, "failed to enable clock %s: %d\n",
+			__clk_get_name(channel->clk), err);
+		return err;
+	}
+
+	chip->ops->get_state(chip, pwm, &channel->state);
+
+	return 0;
+}
+
+static void meson_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct meson_pwm_channel *channel = pwm_get_chip_data(pwm);
+
+	if (channel)
+		clk_disable_unprepare(channel->clk);
+}
+
+static int meson_pwm_calc(struct meson_pwm *meson,
+			  struct meson_pwm_channel *channel, unsigned int id,
+			  unsigned int duty, unsigned int period)
+{
+	unsigned int pre_div, cnt, duty_cnt;
+	unsigned long fin_freq = -1, fin_ns;
+
+	if (~(meson->inverter_mask >> id) & 0x1)
+		duty = period - duty;
+
+	if (period == channel->state.period &&
+	    duty == channel->state.duty_cycle)
+		return 0;
+
+	fin_freq = clk_get_rate(channel->clk);
+	if (fin_freq == 0) {
+		dev_err(meson->chip.dev, "invalid source clock frequency\n");
+		return -EINVAL;
+	}
+
+	dev_dbg(meson->chip.dev, "fin_freq: %lu Hz\n", fin_freq);
+	fin_ns = NSEC_PER_SEC / fin_freq;
+
+	/* Calc pre_div with the period */
+	for (pre_div = 0; pre_div < MISC_CLK_DIV_MASK; pre_div++) {
+		cnt = DIV_ROUND_CLOSEST(period, fin_ns * (pre_div + 1));
+		dev_dbg(meson->chip.dev, "fin_ns=%lu pre_div=%u cnt=%u\n",
+			fin_ns, pre_div, cnt);
+		if (cnt <= 0xffff)
+			break;
+	}
+
+	if (pre_div == MISC_CLK_DIV_MASK) {
+		dev_err(meson->chip.dev, "unable to get period pre_div\n");
+		return -EINVAL;
+	}
+
+	dev_dbg(meson->chip.dev, "period=%u pre_div=%u cnt=%u\n", period,
+		pre_div, cnt);
+
+	if (duty == period) {
+		channel->pre_div = pre_div;
+		channel->hi = cnt;
+		channel->lo = 0;
+	} else if (duty == 0) {
+		channel->pre_div = pre_div;
+		channel->hi = 0;
+		channel->lo = cnt;
+	} else {
+		/* Then check is we can have the duty with the same pre_div */
+		duty_cnt = DIV_ROUND_CLOSEST(duty, fin_ns * (pre_div + 1));
+		if (duty_cnt > 0xffff) {
+			dev_err(meson->chip.dev, "unable to get duty cycle\n");
+			return -EINVAL;
+		}
+
+		dev_dbg(meson->chip.dev, "duty=%u pre_div=%u duty_cnt=%u\n",
+			duty, pre_div, duty_cnt);
+
+		channel->pre_div = pre_div;
+		channel->hi = duty_cnt;
+		channel->lo = cnt - duty_cnt;
+	}
+
+	return 0;
+}
+
+static void meson_pwm_enable(struct meson_pwm *meson,
+			     struct meson_pwm_channel *channel,
+			     unsigned int id)
+{
+	u32 value, clk_shift, clk_enable, enable;
+	unsigned int offset;
+
+	switch (id) {
+	case 0:
+		clk_shift = MISC_A_CLK_DIV_SHIFT;
+		clk_enable = MISC_A_CLK_EN;
+		enable = MISC_A_EN;
+		offset = REG_PWM_A;
+		break;
+
+	case 1:
+		clk_shift = MISC_B_CLK_DIV_SHIFT;
+		clk_enable = MISC_B_CLK_EN;
+		enable = MISC_B_EN;
+		offset = REG_PWM_B;
+		break;
+
+	default:
+		return;
+	}
+
+	value = readl(meson->base + REG_MISC_AB);
+	value &= ~(MISC_CLK_DIV_MASK << clk_shift);
+	value |= channel->pre_div << clk_shift;
+	value |= clk_enable;
+	writel(value, meson->base + REG_MISC_AB);
+
+	value = (channel->hi << PWM_HIGH_SHIFT) | channel->lo;
+	writel(value, meson->base + offset);
+
+	value = readl(meson->base + REG_MISC_AB);
+	value |= enable;
+	writel(value, meson->base + REG_MISC_AB);
+}
+
+static void meson_pwm_disable(struct meson_pwm *meson, unsigned int id)
+{
+	u32 value, enable;
+
+	switch (id) {
+	case 0:
+		enable = MISC_A_EN;
+		break;
+
+	case 1:
+		enable = MISC_B_EN;
+		break;
+
+	default:
+		return;
+	}
+
+	value = readl(meson->base + REG_MISC_AB);
+	value &= ~enable;
+	writel(value, meson->base + REG_MISC_AB);
+}
+
+static int meson_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+			   struct pwm_state *state)
+{
+	struct meson_pwm_channel *channel = pwm_get_chip_data(pwm);
+	struct meson_pwm *meson = to_meson_pwm(chip);
+	unsigned long flags;
+	int err = 0;
+
+	if (!state)
+		return -EINVAL;
+
+	spin_lock_irqsave(&meson->lock, flags);
+
+	if (!state->enabled) {
+		meson_pwm_disable(meson, pwm->hwpwm);
+		channel->state.enabled = false;
+
+		goto unlock;
+	}
+
+	if (state->period != channel->state.period ||
+	    state->duty_cycle != channel->state.duty_cycle ||
+	    state->polarity != channel->state.polarity) {
+		if (channel->state.enabled) {
+			meson_pwm_disable(meson, pwm->hwpwm);
+			channel->state.enabled = false;
+		}
+
+		if (state->polarity != channel->state.polarity) {
+			if (state->polarity == PWM_POLARITY_NORMAL)
+				meson->inverter_mask |= BIT(pwm->hwpwm);
+			else
+				meson->inverter_mask &= ~BIT(pwm->hwpwm);
+		}
+
+		err = meson_pwm_calc(meson, channel, pwm->hwpwm,
+				     state->duty_cycle, state->period);
+		if (err < 0)
+			goto unlock;
+
+		channel->state.polarity = state->polarity;
+		channel->state.period = state->period;
+		channel->state.duty_cycle = state->duty_cycle;
+	}
+
+	if (state->enabled && !channel->state.enabled) {
+		meson_pwm_enable(meson, channel, pwm->hwpwm);
+		channel->state.enabled = true;
+	}
+
+unlock:
+	spin_unlock_irqrestore(&meson->lock, flags);
+	return err;
+}
+
+static void meson_pwm_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
+				struct pwm_state *state)
+{
+	struct meson_pwm *meson = to_meson_pwm(chip);
+	u32 value, mask;
+
+	if (!state)
+		return;
+
+	switch (pwm->hwpwm) {
+	case 0:
+		mask = MISC_A_EN;
+		break;
+
+	case 1:
+		mask = MISC_B_EN;
+		break;
+
+	default:
+		return;
+	}
+
+	value = readl(meson->base + REG_MISC_AB);
+	state->enabled = (value & mask) != 0;
+}
+
+static const struct pwm_ops meson_pwm_ops = {
+	.request = meson_pwm_request,
+	.free = meson_pwm_free,
+	.apply = meson_pwm_apply,
+	.get_state = meson_pwm_get_state,
+	.owner = THIS_MODULE,
+};
+
+static const char * const pwm_meson8b_parent_names[] = {
+	"xtal", "vid_pll", "fclk_div4", "fclk_div3"
+};
+
+static const struct meson_pwm_data pwm_meson8b_data = {
+	.parent_names = pwm_meson8b_parent_names,
+};
+
+static const char * const pwm_gxbb_parent_names[] = {
+	"xtal", "hdmi_pll", "fclk_div4", "fclk_div3"
+};
+
+static const struct meson_pwm_data pwm_gxbb_data = {
+	.parent_names = pwm_gxbb_parent_names,
+};
+
+static const struct of_device_id meson_pwm_matches[] = {
+	{ .compatible = "amlogic,meson8b-pwm", .data = &pwm_meson8b_data },
+	{ .compatible = "amlogic,meson-gxbb-pwm", .data = &pwm_gxbb_data },
+	{},
+};
+MODULE_DEVICE_TABLE(of, meson_pwm_matches);
+
+static int meson_pwm_init_channels(struct meson_pwm *meson,
+				   struct meson_pwm_channel *channels)
+{
+	struct device *dev = meson->chip.dev;
+	struct device_node *np = dev->of_node;
+	struct clk_init_data init;
+	unsigned int i;
+	char name[255];
+	int err;
+
+	for (i = 0; i < meson->chip.npwm; i++) {
+		struct meson_pwm_channel *channel = &channels[i];
+
+		snprintf(name, sizeof(name), "%s#mux%u", np->full_name, i);
+
+		init.name = name;
+		init.ops = &clk_mux_ops;
+		init.flags = CLK_IS_BASIC;
+		init.parent_names = meson->data->parent_names;
+		init.num_parents = 1 << MISC_CLK_SEL_WIDTH;
+
+		channel->mux.reg = meson->base + REG_MISC_AB;
+		channel->mux.shift = mux_reg_shifts[i];
+		channel->mux.mask = BIT(MISC_CLK_SEL_WIDTH) - 1;
+		channel->mux.flags = 0;
+		channel->mux.lock = &meson->lock;
+		channel->mux.table = NULL;
+		channel->mux.hw.init = &init;
+
+		channel->clk = devm_clk_register(dev, &channel->mux.hw);
+		if (IS_ERR(channel->clk)) {
+			err = PTR_ERR(channel->clk);
+			dev_err(dev, "failed to register %s: %d\n", name, err);
+			return err;
+		}
+
+		snprintf(name, sizeof(name), "clkin%u", i);
+
+		channel->clk_parent = devm_clk_get(dev, name);
+		if (IS_ERR(channel->clk_parent)) {
+			err = PTR_ERR(channel->clk_parent);
+			if (err == -EPROBE_DEFER)
+				return err;
+
+			channel->clk_parent = NULL;
+		}
+	}
+
+	return 0;
+}
+
+static void meson_pwm_add_channels(struct meson_pwm *meson,
+				   struct meson_pwm_channel *channels)
+{
+	unsigned int i;
+
+	for (i = 0; i < meson->chip.npwm; i++)
+		pwm_set_chip_data(&meson->chip.pwms[i], &channels[i]);
+}
+
+static int meson_pwm_probe(struct platform_device *pdev)
+{
+	struct meson_pwm_channel *channels;
+	struct meson_pwm *meson;
+	struct resource *regs;
+	int err;
+
+	meson = devm_kzalloc(&pdev->dev, sizeof(*meson), GFP_KERNEL);
+	if (!meson)
+		return -ENOMEM;
+
+	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	meson->base = devm_ioremap_resource(&pdev->dev, regs);
+	if (IS_ERR(meson->base))
+		return PTR_ERR(meson->base);
+
+	meson->chip.dev = &pdev->dev;
+	meson->chip.ops = &meson_pwm_ops;
+	meson->chip.base = -1;
+	meson->chip.npwm = 2;
+	meson->chip.of_xlate = of_pwm_xlate_with_flags;
+	meson->chip.of_pwm_n_cells = 3;
+
+	meson->data = of_device_get_match_data(&pdev->dev);
+	meson->inverter_mask = BIT(meson->chip.npwm) - 1;
+
+	channels = devm_kcalloc(&pdev->dev, meson->chip.npwm, sizeof(*meson),
+				GFP_KERNEL);
+	if (!channels)
+		return -ENOMEM;
+
+	err = meson_pwm_init_channels(meson, channels);
+	if (err < 0)
+		return err;
+
+	err = pwmchip_add(&meson->chip);
+	if (err < 0) {
+		dev_err(&pdev->dev, "failed to register PWM chip: %d\n", err);
+		return err;
+	}
+
+	meson_pwm_add_channels(meson, channels);
+
+	platform_set_drvdata(pdev, meson);
+
+	return 0;
+}
+
+static int meson_pwm_remove(struct platform_device *pdev)
+{
+	struct meson_pwm *meson = platform_get_drvdata(pdev);
+
+	return pwmchip_remove(&meson->chip);
+}
+
+static struct platform_driver meson_pwm_driver = {
+	.driver = {
+		.name = "meson-pwm",
+		.of_match_table = meson_pwm_matches,
+	},
+	.probe = meson_pwm_probe,
+	.remove = meson_pwm_remove,
+};
+module_platform_driver(meson_pwm_driver);
+
+MODULE_ALIAS("platform:meson-pwm");
+MODULE_DESCRIPTION("Amlogic Meson PWM Generator driver");
+MODULE_AUTHOR("Neil Armstrong <narmstrong@baylibre.com>");
+MODULE_LICENSE("Dual BSD/GPL");

drivers/pwm/pwm-mtk-disp.c

@@ -18,30 +18,40 @@
 #include <linux/io.h>
 #include <linux/module.h>
 #include <linux/of.h>
+#include <linux/of_device.h>
 #include <linux/platform_device.h>
 #include <linux/pwm.h>
 #include <linux/slab.h>
 
 #define DISP_PWM_EN		0x00
-#define PWM_ENABLE_MASK		BIT(0)
 
-#define DISP_PWM_COMMIT		0x08
-#define PWM_COMMIT_MASK		BIT(0)
-
-#define DISP_PWM_CON_0		0x10
 #define PWM_CLKDIV_SHIFT	16
 #define PWM_CLKDIV_MAX		0x3ff
 #define PWM_CLKDIV_MASK		(PWM_CLKDIV_MAX << PWM_CLKDIV_SHIFT)
 
-#define DISP_PWM_CON_1		0x14
 #define PWM_PERIOD_BIT_WIDTH	12
 #define PWM_PERIOD_MASK		((1 << PWM_PERIOD_BIT_WIDTH) - 1)
 
 #define PWM_HIGH_WIDTH_SHIFT	16
 #define PWM_HIGH_WIDTH_MASK	(0x1fff << PWM_HIGH_WIDTH_SHIFT)
 
+struct mtk_pwm_data {
+	u32 enable_mask;
+	unsigned int con0;
+	u32 con0_sel;
+	unsigned int con1;
+
+	bool has_commit;
+	unsigned int commit;
+	unsigned int commit_mask;
+
+	unsigned int bls_debug;
+	u32 bls_debug_mask;
+};
+
 struct mtk_disp_pwm {
 	struct pwm_chip chip;
+	const struct mtk_pwm_data *data;
 	struct clk *clk_main;
 	struct clk *clk_mm;
 	void __iomem *base;
@@ -106,12 +116,21 @@ static int mtk_disp_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
 		return err;
 	}
 
-	mtk_disp_pwm_update_bits(mdp, DISP_PWM_CON_0, PWM_CLKDIV_MASK,
+	mtk_disp_pwm_update_bits(mdp, mdp->data->con0,
+				 PWM_CLKDIV_MASK,
 				 clk_div << PWM_CLKDIV_SHIFT);
-	mtk_disp_pwm_update_bits(mdp, DISP_PWM_CON_1,
-				 PWM_PERIOD_MASK | PWM_HIGH_WIDTH_MASK, value);
-	mtk_disp_pwm_update_bits(mdp, DISP_PWM_COMMIT, PWM_COMMIT_MASK, 1);
-	mtk_disp_pwm_update_bits(mdp, DISP_PWM_COMMIT, PWM_COMMIT_MASK, 0);
+	mtk_disp_pwm_update_bits(mdp, mdp->data->con1,
+				 PWM_PERIOD_MASK | PWM_HIGH_WIDTH_MASK,
+				 value);
+
+	if (mdp->data->has_commit) {
+		mtk_disp_pwm_update_bits(mdp, mdp->data->commit,
+					 mdp->data->commit_mask,
+					 mdp->data->commit_mask);
+		mtk_disp_pwm_update_bits(mdp, mdp->data->commit,
+					 mdp->data->commit_mask,
+					 0x0);
+	}
 
 	clk_disable(mdp->clk_mm);
 	clk_disable(mdp->clk_main);
@@ -134,7 +153,8 @@ static int mtk_disp_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
 		return err;
 	}
 
-	mtk_disp_pwm_update_bits(mdp, DISP_PWM_EN, PWM_ENABLE_MASK, 1);
+	mtk_disp_pwm_update_bits(mdp, DISP_PWM_EN, mdp->data->enable_mask,
+				 mdp->data->enable_mask);
 
 	return 0;
 }
@@ -143,7 +163,8 @@ static void mtk_disp_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
 {
 	struct mtk_disp_pwm *mdp = to_mtk_disp_pwm(chip);
 
-	mtk_disp_pwm_update_bits(mdp, DISP_PWM_EN, PWM_ENABLE_MASK, 0);
+	mtk_disp_pwm_update_bits(mdp, DISP_PWM_EN, mdp->data->enable_mask,
+				 0x0);
 
 	clk_disable(mdp->clk_mm);
 	clk_disable(mdp->clk_main);
@@ -166,6 +187,8 @@ static int mtk_disp_pwm_probe(struct platform_device *pdev)
 	if (!mdp)
 		return -ENOMEM;
 
+	mdp->data = of_device_get_match_data(&pdev->dev);
+
 	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	mdp->base = devm_ioremap_resource(&pdev->dev, r);
 	if (IS_ERR(mdp->base))
@@ -200,6 +223,19 @@ static int mtk_disp_pwm_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, mdp);
 
+	/*
+	 * For MT2701, disable double buffer before writing register
+	 * and select manual mode and use PWM_PERIOD/PWM_HIGH_WIDTH.
+	 */
+	if (!mdp->data->has_commit) {
+		mtk_disp_pwm_update_bits(mdp, mdp->data->bls_debug,
+					 mdp->data->bls_debug_mask,
+					 mdp->data->bls_debug_mask);
+		mtk_disp_pwm_update_bits(mdp, mdp->data->con0,
+					 mdp->data->con0_sel,
+					 mdp->data->con0_sel);
+	}
+
 	return 0;
 
 disable_clk_mm:
@@ -221,9 +257,30 @@ static int mtk_disp_pwm_remove(struct platform_device *pdev)
 	return ret;
 }
 
+static const struct mtk_pwm_data mt2701_pwm_data = {
+	.enable_mask = BIT(16),
+	.con0 = 0xa8,
+	.con0_sel = 0x2,
+	.con1 = 0xac,
+	.has_commit = false,
+	.bls_debug = 0xb0,
+	.bls_debug_mask = 0x3,
+};
+
+static const struct mtk_pwm_data mt8173_pwm_data = {
+	.enable_mask = BIT(0),
+	.con0 = 0x10,
+	.con0_sel = 0x0,
+	.con1 = 0x14,
+	.has_commit = true,
+	.commit = 0x8,
+	.commit_mask = 0x1,
+};
+
 static const struct of_device_id mtk_disp_pwm_of_match[] = {
-	{ .compatible = "mediatek,mt8173-disp-pwm" },
-	{ .compatible = "mediatek,mt6595-disp-pwm" },
+	{ .compatible = "mediatek,mt2701-disp-pwm", .data = &mt2701_pwm_data},
+	{ .compatible = "mediatek,mt6595-disp-pwm", .data = &mt8173_pwm_data},
+	{ .compatible = "mediatek,mt8173-disp-pwm", .data = &mt8173_pwm_data},
 	{ }
 };
 MODULE_DEVICE_TABLE(of, mtk_disp_pwm_of_match);

drivers/pwm/pwm-samsung.c

@@ -193,9 +193,18 @@ static unsigned long pwm_samsung_calc_tin(struct samsung_pwm_chip *chip,
 	 * divider settings and choose the lowest divisor that can generate
 	 * frequencies lower than requested.
 	 */
-	for (div = variant->div_base; div < 4; ++div)
-		if ((rate >> (variant->bits + div)) < freq)
-			break;
+	if (variant->bits < 32) {
+		/* Only for s3c24xx */
+		for (div = variant->div_base; div < 4; ++div)
+			if ((rate >> (variant->bits + div)) < freq)
+				break;
+	} else {
+		/*
+		 * Other variants have enough counter bits to generate any
+		 * requested rate, so no need to check higher divisors.
+		 */
+		div = variant->div_base;
+	}
 
 	pwm_samsung_set_divisor(chip, chan, BIT(div));
 

drivers/pwm/pwm-sti.c

 /*
- * PWM device driver for ST SoCs.
- * Author: Ajit Pal Singh <ajitpal.singh@st.com>
+ * PWM device driver for ST SoCs
+ *
+ * Copyright (C) 2013-2016 STMicroelectronics (R&D) Limited
  *
- * Copyright (C) 2013-2014 STMicroelectronics (R&D) Limited
+ * Author: Ajit Pal Singh <ajitpal.singh@st.com>
+ *         Lee Jones <lee.jones@linaro.org>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -11,6 +13,7 @@
  */
 
 #include <linux/clk.h>
+#include <linux/interrupt.h>
 #include <linux/math64.h>
 #include <linux/mfd/syscon.h>
 #include <linux/module.h>
@@ -18,43 +21,82 @@
 #include <linux/platform_device.h>
 #include <linux/pwm.h>
 #include <linux/regmap.h>
+#include <linux/sched.h>
 #include <linux/slab.h>
 #include <linux/time.h>
+#include <linux/wait.h>
+
+#define PWM_OUT_VAL(x)	(0x00 + (4 * (x))) /* Device's Duty Cycle register */
+#define PWM_CPT_VAL(x)	(0x10 + (4 * (x))) /* Capture value */
+#define PWM_CPT_EDGE(x) (0x30 + (4 * (x))) /* Edge to capture on */
 
-#define STI_DS_REG(ch)	(4 * (ch))	/* Channel's Duty Cycle register */
-#define STI_PWMCR	0x50		/* Control/Config register */
-#define STI_INTEN	0x54		/* Interrupt Enable/Disable register */
-#define PWM_PRESCALE_LOW_MASK		0x0f
-#define PWM_PRESCALE_HIGH_MASK		0xf0
+#define STI_PWM_CTRL		0x50	/* Control/Config register */
+#define STI_INT_EN		0x54	/* Interrupt Enable/Disable register */
+#define STI_INT_STA		0x58	/* Interrupt Status register */
+#define PWM_INT_ACK		0x5c
+#define PWM_PRESCALE_LOW_MASK	0x0f
+#define PWM_PRESCALE_HIGH_MASK	0xf0
+#define PWM_CPT_EDGE_MASK	0x03
+#define PWM_INT_ACK_MASK	0x1ff
+
+#define STI_MAX_CPT_DEVS	4
+#define CPT_DC_MAX		0xff
 
 /* Regfield IDs */
 enum {
+	/* Bits in PWM_CTRL*/
 	PWMCLK_PRESCALE_LOW,
 	PWMCLK_PRESCALE_HIGH,
-	PWM_EN,
-	PWM_INT_EN,
+	CPTCLK_PRESCALE,
+
+	PWM_OUT_EN,
+	PWM_CPT_EN,
+
+	PWM_CPT_INT_EN,
+	PWM_CPT_INT_STAT,
 
 	/* Keep last */
 	MAX_REGFIELDS
 };
 
+/*
+ * Each capture input can be programmed to detect rising-edge, falling-edge,
+ * either edge or neither egde.
+ */
+enum sti_cpt_edge {
+	CPT_EDGE_DISABLED,
+	CPT_EDGE_RISING,
+	CPT_EDGE_FALLING,
+	CPT_EDGE_BOTH,
+};
+
+struct sti_cpt_ddata {
+	u32 snapshot[3];
+	unsigned int index;
+	struct mutex lock;
+	wait_queue_head_t wait;
+};
+
 struct sti_pwm_compat_data {
 	const struct reg_field *reg_fields;
-	unsigned int num_chan;
+	unsigned int pwm_num_devs;
+	unsigned int cpt_num_devs;
 	unsigned int max_pwm_cnt;
 	unsigned int max_prescale;
 };
 
 struct sti_pwm_chip {
 	struct device *dev;
-	struct clk *clk;
-	unsigned long clk_rate;
+	struct clk *pwm_clk;
+	struct clk *cpt_clk;
 	struct regmap *regmap;
 	struct sti_pwm_compat_data *cdata;
 	struct regmap_field *prescale_low;
 	struct regmap_field *prescale_high;
-	struct regmap_field *pwm_en;
-	struct regmap_field *pwm_int_en;
+	struct regmap_field *pwm_out_en;
+	struct regmap_field *pwm_cpt_en;
+	struct regmap_field *pwm_cpt_int_en;
+	struct regmap_field *pwm_cpt_int_stat;
 	struct pwm_chip chip;
 	struct pwm_device *cur;
 	unsigned long configured;
@@ -64,10 +106,13 @@ struct sti_pwm_chip {
 };
 
 static const struct reg_field sti_pwm_regfields[MAX_REGFIELDS] = {
-	[PWMCLK_PRESCALE_LOW]	= REG_FIELD(STI_PWMCR, 0, 3),
-	[PWMCLK_PRESCALE_HIGH]	= REG_FIELD(STI_PWMCR, 11, 14),
-	[PWM_EN]		= REG_FIELD(STI_PWMCR, 9, 9),
-	[PWM_INT_EN]		= REG_FIELD(STI_INTEN, 0, 0),
+	[PWMCLK_PRESCALE_LOW] = REG_FIELD(STI_PWM_CTRL, 0, 3),
+	[PWMCLK_PRESCALE_HIGH] = REG_FIELD(STI_PWM_CTRL, 11, 14),
+	[CPTCLK_PRESCALE] = REG_FIELD(STI_PWM_CTRL, 4, 8),
+	[PWM_OUT_EN] = REG_FIELD(STI_PWM_CTRL, 9, 9),
+	[PWM_CPT_EN] = REG_FIELD(STI_PWM_CTRL, 10, 10),
+	[PWM_CPT_INT_EN] = REG_FIELD(STI_INT_EN, 1, 4),
+	[PWM_CPT_INT_STAT] = REG_FIELD(STI_INT_STA, 1, 4),
 };
 
 static inline struct sti_pwm_chip *to_sti_pwmchip(struct pwm_chip *chip)
@@ -82,61 +127,68 @@ static int sti_pwm_get_prescale(struct sti_pwm_chip *pc, unsigned long period,
 				unsigned int *prescale)
 {
 	struct sti_pwm_compat_data *cdata = pc->cdata;
-	unsigned long val;
+	unsigned long clk_rate;
+	unsigned long value;
 	unsigned int ps;
 
+	clk_rate = clk_get_rate(pc->pwm_clk);
+	if (!clk_rate) {
+		dev_err(pc->dev, "failed to get clock rate\n");
+		return -EINVAL;
+	}
+
 	/*
-	 * prescale = ((period_ns * clk_rate) / (10^9 * (max_pwm_count + 1)) - 1
+	 * prescale = ((period_ns * clk_rate) / (10^9 * (max_pwm_cnt + 1)) - 1
 	 */
-	val = NSEC_PER_SEC / pc->clk_rate;
-	val *= cdata->max_pwm_cnt + 1;
+	value = NSEC_PER_SEC / clk_rate;
+	value *= cdata->max_pwm_cnt + 1;
 
-	if (period % val) {
+	if (period % value)
 		return -EINVAL;
-	} else {
-		ps  = period / val - 1;
-		if (ps > cdata->max_prescale)
-			return -EINVAL;
-	}
+
+	ps  = period / value - 1;
+	if (ps > cdata->max_prescale)
+		return -EINVAL;
+
 	*prescale = ps;
 
 	return 0;
 }
 
 /*
- * For STiH4xx PWM IP, the PWM period is fixed to 256 local clock cycles.
- * The only way to change the period (apart from changing the PWM input clock)
- * is to change the PWM clock prescaler.
- * The prescaler is of 8 bits, so 256 prescaler values and hence
- * 256 possible period values are supported (for a particular clock rate).
- * The requested period will be applied only if it matches one of these
- * 256 values.
+ * For STiH4xx PWM IP, the PWM period is fixed to 256 local clock cycles. The
+ * only way to change the period (apart from changing the PWM input clock) is
+ * to change the PWM clock prescaler.
+ *
+ * The prescaler is of 8 bits, so 256 prescaler values and hence 256 possible
+ * period values are supported (for a particular clock rate). The requested
+ * period will be applied only if it matches one of these 256 values.
  */
 static int sti_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
-			 int duty_ns, int period_ns)
+			  int duty_ns, int period_ns)
 {
 	struct sti_pwm_chip *pc = to_sti_pwmchip(chip);
 	struct sti_pwm_compat_data *cdata = pc->cdata;
+	unsigned int ncfg, value, prescale = 0;
 	struct pwm_device *cur = pc->cur;
 	struct device *dev = pc->dev;
-	unsigned int prescale = 0, pwmvalx;
-	int ret;
-	unsigned int ncfg;
 	bool period_same = false;
+	int ret;
 
 	ncfg = hweight_long(pc->configured);
 	if (ncfg)
 		period_same = (period_ns == pwm_get_period(cur));
 
-	/* Allow configuration changes if one of the
-	 * following conditions satisfy.
-	 * 1. No channels have been configured.
-	 * 2. Only one channel has been configured and the new request
-	 *    is for the same channel.
-	 * 3. Only one channel has been configured and the new request is
-	 *    for a new channel and period of the new channel is same as
-	 *    the current configured period.
-	 * 4. More than one channels are configured and period of the new
+	/*
+	 * Allow configuration changes if one of the following conditions
+	 * satisfy.
+	 * 1. No devices have been configured.
+	 * 2. Only one device has been configured and the new request is for
+	 *    the same device.
+	 * 3. Only one device has been configured and the new request is for
+	 *    a new device and period of the new device is same as the current
+	 *    configured period.
+	 * 4. More than one devices are configured and period of the new
 	 *    requestis the same as the current period.
 	 */
 	if (!ncfg ||
@@ -144,7 +196,11 @@ static int sti_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
 	    ((ncfg == 1) && (pwm->hwpwm != cur->hwpwm) && period_same) ||
 	    ((ncfg > 1) && period_same)) {
 		/* Enable clock before writing to PWM registers. */
-		ret = clk_enable(pc->clk);
+		ret = clk_enable(pc->pwm_clk);
+		if (ret)
+			return ret;
+
+		ret = clk_enable(pc->cpt_clk);
 		if (ret)
 			return ret;
 
@@ -153,15 +209,15 @@ static int sti_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
 			if (ret)
 				goto clk_dis;
 
-			ret =
-			regmap_field_write(pc->prescale_low,
-					   prescale & PWM_PRESCALE_LOW_MASK);
+			value = prescale & PWM_PRESCALE_LOW_MASK;
+
+			ret = regmap_field_write(pc->prescale_low, value);
 			if (ret)
 				goto clk_dis;
 
-			ret =
-			regmap_field_write(pc->prescale_high,
-				(prescale & PWM_PRESCALE_HIGH_MASK) >> 4);
+			value = (prescale & PWM_PRESCALE_HIGH_MASK) >> 4;
+
+			ret = regmap_field_write(pc->prescale_high, value);
 			if (ret)
 				goto clk_dis;
 		}
@@ -172,25 +228,26 @@ static int sti_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
 		 * PWM pulse = (max_pwm_count + 1) local cycles,
 		 * that is continuous pulse: signal never goes low.
 		 */
-		pwmvalx = cdata->max_pwm_cnt * duty_ns / period_ns;
+		value = cdata->max_pwm_cnt * duty_ns / period_ns;
 
-		ret = regmap_write(pc->regmap, STI_DS_REG(pwm->hwpwm), pwmvalx);
+		ret = regmap_write(pc->regmap, PWM_OUT_VAL(pwm->hwpwm), value);
 		if (ret)
 			goto clk_dis;
 
-		ret = regmap_field_write(pc->pwm_int_en, 0);
+		ret = regmap_field_write(pc->pwm_cpt_int_en, 0);
 
 		set_bit(pwm->hwpwm, &pc->configured);
 		pc->cur = pwm;
 
-		dev_dbg(dev, "prescale:%u, period:%i, duty:%i, pwmvalx:%u\n",
-			prescale, period_ns, duty_ns, pwmvalx);
+		dev_dbg(dev, "prescale:%u, period:%i, duty:%i, value:%u\n",
+			prescale, period_ns, duty_ns, value);
 	} else {
 		return -EINVAL;
 	}
 
 clk_dis:
-	clk_disable(pc->clk);
+	clk_disable(pc->pwm_clk);
+	clk_disable(pc->cpt_clk);
 	return ret;
 }
 
@@ -201,23 +258,30 @@ static int sti_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
 	int ret = 0;
 
 	/*
-	 * Since we have a common enable for all PWM channels,
-	 * do not enable if already enabled.
+	 * Since we have a common enable for all PWM devices, do not enable if
+	 * already enabled.
 	 */
 	mutex_lock(&pc->sti_pwm_lock);
+
 	if (!pc->en_count) {
-		ret = clk_enable(pc->clk);
+		ret = clk_enable(pc->pwm_clk);
+		if (ret)
+			goto out;
+
+		ret = clk_enable(pc->cpt_clk);
 		if (ret)
 			goto out;
 
-		ret = regmap_field_write(pc->pwm_en, 1);
+		ret = regmap_field_write(pc->pwm_out_en, 1);
 		if (ret) {
-			dev_err(dev, "failed to enable PWM device:%d\n",
-				pwm->hwpwm);
+			dev_err(dev, "failed to enable PWM device %u: %d\n",
+				pwm->hwpwm, ret);
 			goto out;
 		}
 	}
+
 	pc->en_count++;
+
 out:
 	mutex_unlock(&pc->sti_pwm_lock);
 	return ret;
@@ -228,13 +292,17 @@ static void sti_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
 	struct sti_pwm_chip *pc = to_sti_pwmchip(chip);
 
 	mutex_lock(&pc->sti_pwm_lock);
+
 	if (--pc->en_count) {
 		mutex_unlock(&pc->sti_pwm_lock);
 		return;
 	}
-	regmap_field_write(pc->pwm_en, 0);
 
-	clk_disable(pc->clk);
+	regmap_field_write(pc->pwm_out_en, 0);
+
+	clk_disable(pc->pwm_clk);
+	clk_disable(pc->cpt_clk);
+
 	mutex_unlock(&pc->sti_pwm_lock);
 }
 
@@ -245,7 +313,90 @@ static void sti_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
 	clear_bit(pwm->hwpwm, &pc->configured);
 }
 
+static int sti_pwm_capture(struct pwm_chip *chip, struct pwm_device *pwm,
+			   struct pwm_capture *result, unsigned long timeout)
+{
+	struct sti_pwm_chip *pc = to_sti_pwmchip(chip);
+	struct sti_pwm_compat_data *cdata = pc->cdata;
+	struct sti_cpt_ddata *ddata = pwm_get_chip_data(pwm);
+	struct device *dev = pc->dev;
+	unsigned int effective_ticks;
+	unsigned long long high, low;
+	int ret;
+
+	if (pwm->hwpwm >= cdata->cpt_num_devs) {
+		dev_err(dev, "device %u is not valid\n", pwm->hwpwm);
+		return -EINVAL;
+	}
+
+	mutex_lock(&ddata->lock);
+	ddata->index = 0;
+
+	/* Prepare capture measurement */
+	regmap_write(pc->regmap, PWM_CPT_EDGE(pwm->hwpwm), CPT_EDGE_RISING);
+	regmap_field_write(pc->pwm_cpt_int_en, BIT(pwm->hwpwm));
+
+	/* Enable capture */
+	ret = regmap_field_write(pc->pwm_cpt_en, 1);
+	if (ret) {
+		dev_err(dev, "failed to enable PWM capture %u: %d\n",
+			pwm->hwpwm, ret);
+		goto out;
+	}
+
+	ret = wait_event_interruptible_timeout(ddata->wait, ddata->index > 1,
+					       msecs_to_jiffies(timeout));
+
+	regmap_write(pc->regmap, PWM_CPT_EDGE(pwm->hwpwm), CPT_EDGE_DISABLED);
+
+	if (ret == -ERESTARTSYS)
+		goto out;
+
+	switch (ddata->index) {
+	case 0:
+	case 1:
+		/*
+		 * Getting here could mean:
+		 *  - input signal is constant of less than 1 Hz
+		 *  - there is no input signal at all
+		 *
+		 * In such case the frequency is rounded down to 0
+		 */
+		result->period = 0;
+		result->duty_cycle = 0;
+
+		break;
+
+	case 2:
+		/* We have everying we need */
+		high = ddata->snapshot[1] - ddata->snapshot[0];
+		low = ddata->snapshot[2] - ddata->snapshot[1];
+
+		effective_ticks = clk_get_rate(pc->cpt_clk);
+
+		result->period = (high + low) * NSEC_PER_SEC;
+		result->period /= effective_ticks;
+
+		result->duty_cycle = high * NSEC_PER_SEC;
+		result->duty_cycle /= effective_ticks;
+
+		break;
+
+	default:
+		dev_err(dev, "internal error\n");
+		break;
+	}
+
+out:
+	/* Disable capture */
+	regmap_field_write(pc->pwm_cpt_en, 0);
+
+	mutex_unlock(&ddata->lock);
+	return ret;
+}
+
 static const struct pwm_ops sti_pwm_ops = {
+	.capture = sti_pwm_capture,
 	.config = sti_pwm_config,
 	.enable = sti_pwm_enable,
 	.disable = sti_pwm_disable,
@@ -253,17 +404,98 @@ static const struct pwm_ops sti_pwm_ops = {
 	.owner = THIS_MODULE,
 };
 
+static irqreturn_t sti_pwm_interrupt(int irq, void *data)
+{
+	struct sti_pwm_chip *pc = data;
+	struct device *dev = pc->dev;
+	struct sti_cpt_ddata *ddata;
+	int devicenum;
+	unsigned int cpt_int_stat;
+	unsigned int reg;
+	int ret = IRQ_NONE;
+
+	ret = regmap_field_read(pc->pwm_cpt_int_stat, &cpt_int_stat);
+	if (ret)
+		return ret;
+
+	while (cpt_int_stat) {
+		devicenum = ffs(cpt_int_stat) - 1;
+
+		ddata = pwm_get_chip_data(&pc->chip.pwms[devicenum]);
+
+		/*
+		 * Capture input:
+		 *    _______                   _______
+		 *   |       |                 |       |
+		 * __|       |_________________|       |________
+		 *   ^0      ^1                ^2
+		 *
+		 * Capture start by the first available rising edge. When a
+		 * capture event occurs, capture value (CPT_VALx) is stored,
+		 * index incremented, capture edge changed.
+		 *
+		 * After the capture, if the index > 1, we have collected the
+		 * necessary data so we signal the thread waiting for it and
+		 * disable the capture by setting capture edge to none
+		 */
+
+		regmap_read(pc->regmap,
+			    PWM_CPT_VAL(devicenum),
+			    &ddata->snapshot[ddata->index]);
+
+		switch (ddata->index) {
+		case 0:
+		case 1:
+			regmap_read(pc->regmap, PWM_CPT_EDGE(devicenum), &reg);
+			reg ^= PWM_CPT_EDGE_MASK;
+			regmap_write(pc->regmap, PWM_CPT_EDGE(devicenum), reg);
+
+			ddata->index++;
+			break;
+
+		case 2:
+			regmap_write(pc->regmap,
+				     PWM_CPT_EDGE(devicenum),
+				     CPT_EDGE_DISABLED);
+			wake_up(&ddata->wait);
+			break;
+
+		default:
+			dev_err(dev, "Internal error\n");
+		}
+
+		cpt_int_stat &= ~BIT_MASK(devicenum);
+
+		ret = IRQ_HANDLED;
+	}
+
+	/* Just ACK everything */
+	regmap_write(pc->regmap, PWM_INT_ACK, PWM_INT_ACK_MASK);
+
+	return ret;
+}
+
 static int sti_pwm_probe_dt(struct sti_pwm_chip *pc)
 {
 	struct device *dev = pc->dev;
 	const struct reg_field *reg_fields;
 	struct device_node *np = dev->of_node;
 	struct sti_pwm_compat_data *cdata = pc->cdata;
-	u32 num_chan;
+	u32 num_devs;
+	int ret;
+
+	ret = of_property_read_u32(np, "st,pwm-num-chan", &num_devs);
+	if (!ret)
+		cdata->pwm_num_devs = num_devs;
+
+	ret = of_property_read_u32(np, "st,capture-num-chan", &num_devs);
+	if (!ret)
+		cdata->cpt_num_devs = num_devs;
 
-	of_property_read_u32(np, "st,pwm-num-chan", &num_chan);
-	if (num_chan)
-		cdata->num_chan = num_chan;
+	if (!cdata->pwm_num_devs && !cdata->cpt_num_devs) {
+		dev_err(dev, "No channels configured\n");
+		return -EINVAL;
+	}
 
 	reg_fields = cdata->reg_fields;
 
@@ -277,15 +509,26 @@ static int sti_pwm_probe_dt(struct sti_pwm_chip *pc)
 	if (IS_ERR(pc->prescale_high))
 		return PTR_ERR(pc->prescale_high);
 
-	pc->pwm_en = devm_regmap_field_alloc(dev, pc->regmap,
-					     reg_fields[PWM_EN]);
-	if (IS_ERR(pc->pwm_en))
-		return PTR_ERR(pc->pwm_en);
 
-	pc->pwm_int_en = devm_regmap_field_alloc(dev, pc->regmap,
-						 reg_fields[PWM_INT_EN]);
-	if (IS_ERR(pc->pwm_int_en))
-		return PTR_ERR(pc->pwm_int_en);
+	pc->pwm_out_en = devm_regmap_field_alloc(dev, pc->regmap,
+						 reg_fields[PWM_OUT_EN]);
+	if (IS_ERR(pc->pwm_out_en))
+		return PTR_ERR(pc->pwm_out_en);
+
+	pc->pwm_cpt_en = devm_regmap_field_alloc(dev, pc->regmap,
+						 reg_fields[PWM_CPT_EN]);
+	if (IS_ERR(pc->pwm_cpt_en))
+		return PTR_ERR(pc->pwm_cpt_en);
+
+	pc->pwm_cpt_int_en = devm_regmap_field_alloc(dev, pc->regmap,
+						reg_fields[PWM_CPT_INT_EN]);
+	if (IS_ERR(pc->pwm_cpt_int_en))
+		return PTR_ERR(pc->pwm_cpt_int_en);
+
+	pc->pwm_cpt_int_stat = devm_regmap_field_alloc(dev, pc->regmap,
+						reg_fields[PWM_CPT_INT_STAT]);
+	if (PTR_ERR_OR_ZERO(pc->pwm_cpt_int_stat))
+		return PTR_ERR(pc->pwm_cpt_int_stat);
 
 	return 0;
 }
@@ -302,7 +545,8 @@ static int sti_pwm_probe(struct platform_device *pdev)
 	struct sti_pwm_compat_data *cdata;
 	struct sti_pwm_chip *pc;
 	struct resource *res;
-	int ret;
+	unsigned int i;
+	int irq, ret;
 
 	pc = devm_kzalloc(dev, sizeof(*pc), GFP_KERNEL);
 	if (!pc)
@@ -323,14 +567,28 @@ static int sti_pwm_probe(struct platform_device *pdev)
 	if (IS_ERR(pc->regmap))
 		return PTR_ERR(pc->regmap);
 
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(&pdev->dev, "Failed to obtain IRQ\n");
+		return irq;
+	}
+
+	ret = devm_request_irq(&pdev->dev, irq, sti_pwm_interrupt, 0,
+			       pdev->name, pc);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Failed to request IRQ\n");
+		return ret;
+	}
+
 	/*
 	 * Setup PWM data with default values: some values could be replaced
 	 * with specific ones provided from Device Tree.
 	 */
-	cdata->reg_fields   = &sti_pwm_regfields[0];
+	cdata->reg_fields = sti_pwm_regfields;
 	cdata->max_prescale = 0xff;
-	cdata->max_pwm_cnt  = 255;
-	cdata->num_chan     = 1;
+	cdata->max_pwm_cnt = 255;
+	cdata->pwm_num_devs = 0;
+	cdata->cpt_num_devs = 0;
 
 	pc->cdata = cdata;
 	pc->dev = dev;
@@ -341,36 +599,64 @@ static int sti_pwm_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
-	pc->clk = of_clk_get_by_name(dev->of_node, "pwm");
-	if (IS_ERR(pc->clk)) {
+	if (!cdata->pwm_num_devs)
+		goto skip_pwm;
+
+	pc->pwm_clk = of_clk_get_by_name(dev->of_node, "pwm");
+	if (IS_ERR(pc->pwm_clk)) {
 		dev_err(dev, "failed to get PWM clock\n");
-		return PTR_ERR(pc->clk);
+		return PTR_ERR(pc->pwm_clk);
 	}
 
-	pc->clk_rate = clk_get_rate(pc->clk);
-	if (!pc->clk_rate) {
-		dev_err(dev, "failed to get clock rate\n");
-		return -EINVAL;
+	ret = clk_prepare(pc->pwm_clk);
+	if (ret) {
+		dev_err(dev, "failed to prepare clock\n");
+		return ret;
 	}
 
-	ret = clk_prepare(pc->clk);
+skip_pwm:
+	if (!cdata->cpt_num_devs)
+		goto skip_cpt;
+
+	pc->cpt_clk = of_clk_get_by_name(dev->of_node, "capture");
+	if (IS_ERR(pc->cpt_clk)) {
+		dev_err(dev, "failed to get PWM capture clock\n");
+		return PTR_ERR(pc->cpt_clk);
+	}
+
+	ret = clk_prepare(pc->cpt_clk);
 	if (ret) {
 		dev_err(dev, "failed to prepare clock\n");
 		return ret;
 	}
 
+skip_cpt:
 	pc->chip.dev = dev;
 	pc->chip.ops = &sti_pwm_ops;
 	pc->chip.base = -1;
-	pc->chip.npwm = pc->cdata->num_chan;
+	pc->chip.npwm = pc->cdata->pwm_num_devs;
 	pc->chip.can_sleep = true;
 
 	ret = pwmchip_add(&pc->chip);
 	if (ret < 0) {
-		clk_unprepare(pc->clk);
+		clk_unprepare(pc->pwm_clk);
+		clk_unprepare(pc->cpt_clk);
 		return ret;
 	}
 
+	for (i = 0; i < cdata->cpt_num_devs; i++) {
+		struct sti_cpt_ddata *ddata;
+
+		ddata = devm_kzalloc(dev, sizeof(*ddata), GFP_KERNEL);
+		if (!ddata)
+			return -ENOMEM;
+
+		init_waitqueue_head(&ddata->wait);
+		mutex_init(&ddata->lock);
+
+		pwm_set_chip_data(&pc->chip.pwms[i], ddata);
+	}
+
 	platform_set_drvdata(pdev, pc);
 
 	return 0;
@@ -381,10 +667,11 @@ static int sti_pwm_remove(struct platform_device *pdev)
 	struct sti_pwm_chip *pc = platform_get_drvdata(pdev);
 	unsigned int i;
 
-	for (i = 0; i < pc->cdata->num_chan; i++)
+	for (i = 0; i < pc->cdata->pwm_num_devs; i++)
 		pwm_disable(&pc->chip.pwms[i]);
 
-	clk_unprepare(pc->clk);
+	clk_unprepare(pc->pwm_clk);
+	clk_unprepare(pc->cpt_clk);
 
 	return pwmchip_remove(&pc->chip);
 }

drivers/pwm/pwm-sun4i.c

@@ -284,6 +284,12 @@ static const struct sun4i_pwm_data sun4i_pwm_data_a20 = {
 	.npwm = 2,
 };
 
+static const struct sun4i_pwm_data sun4i_pwm_data_h3 = {
+	.has_prescaler_bypass = true,
+	.has_rdy = true,
+	.npwm = 1,
+};
+
 static const struct of_device_id sun4i_pwm_dt_ids[] = {
 	{
 		.compatible = "allwinner,sun4i-a10-pwm",
@@ -297,6 +303,9 @@ static const struct of_device_id sun4i_pwm_dt_ids[] = {
 	}, {
 		.compatible = "allwinner,sun7i-a20-pwm",
 		.data = &sun4i_pwm_data_a20,
+	}, {
+		.compatible = "allwinner,sun8i-h3-pwm",
+		.data = &sun4i_pwm_data_h3,
 	}, {
 		/* sentinel */
 	},

drivers/pwm/pwm-tipwmss.c

@@ -34,7 +34,6 @@ static int pwmss_probe(struct platform_device *pdev)
 	struct device_node *node = pdev->dev.of_node;
 
 	pm_runtime_enable(&pdev->dev);
-	pm_runtime_get_sync(&pdev->dev);
 
 	/* Populate all the child nodes here... */
 	ret = of_platform_populate(node, NULL, NULL, &pdev->dev);
@@ -46,31 +45,13 @@ static int pwmss_probe(struct platform_device *pdev)
 
 static int pwmss_remove(struct platform_device *pdev)
 {
-	pm_runtime_put_sync(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);
 	return 0;
 }
 
-#ifdef CONFIG_PM_SLEEP
-static int pwmss_suspend(struct device *dev)
-{
-	pm_runtime_put_sync(dev);
-	return 0;
-}
-
-static int pwmss_resume(struct device *dev)
-{
-	pm_runtime_get_sync(dev);
-	return 0;
-}
-#endif
-
-static SIMPLE_DEV_PM_OPS(pwmss_pm_ops, pwmss_suspend, pwmss_resume);
-
 static struct platform_driver pwmss_driver = {
 	.driver	= {
 		.name	= "pwmss",
-		.pm	= &pwmss_pm_ops,
 		.of_match_table	= pwmss_of_match,
 	},
 	.probe	= pwmss_probe,

drivers/pwm/pwm-twl.c

@@ -269,6 +269,22 @@ static void twl6030_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
 		goto out;
 	}
 
+	val |= TWL6030_PWM_TOGGLE(pwm->hwpwm, TWL6030_PWMXEN);
+
+	ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, val, TWL6030_TOGGLE3_REG);
+	if (ret < 0) {
+		dev_err(chip->dev, "%s: Failed to disable PWM\n", pwm->label);
+		goto out;
+	}
+
+	val &= ~TWL6030_PWM_TOGGLE(pwm->hwpwm, TWL6030_PWMXEN);
+
+	ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, val, TWL6030_TOGGLE3_REG);
+	if (ret < 0) {
+		dev_err(chip->dev, "%s: Failed to disable PWM\n", pwm->label);
+		goto out;
+	}
+
 	twl->twl6030_toggle3 = val;
 out:
 	mutex_unlock(&twl->mutex);

drivers/pwm/sysfs.c

@@ -409,6 +409,24 @@ void pwmchip_sysfs_unexport(struct pwm_chip *chip)
 	}
 }
 
+void pwmchip_sysfs_unexport_children(struct pwm_chip *chip)
+{
+	struct device *parent;
+	unsigned int i;
+
+	parent = class_find_device(&pwm_class, NULL, chip,
+				   pwmchip_sysfs_match);
+	if (!parent)
+		return;
+
+	for (i = 0; i < chip->npwm; i++) {
+		struct pwm_device *pwm = &chip->pwms[i];
+
+		if (test_bit(PWMF_EXPORTED, &pwm->flags))
+			pwm_unexport_child(parent, pwm);
+	}
+}
+
 static int __init pwm_sysfs_init(void)
 {
 	return class_register(&pwm_class);

include/linux/pwm.h

@@ -641,6 +641,7 @@ static inline void pwm_remove_table(struct pwm_lookup *table, size_t num)
 #ifdef CONFIG_PWM_SYSFS
 void pwmchip_sysfs_export(struct pwm_chip *chip);
 void pwmchip_sysfs_unexport(struct pwm_chip *chip);
+void pwmchip_sysfs_unexport_children(struct pwm_chip *chip);
 #else
 static inline void pwmchip_sysfs_export(struct pwm_chip *chip)
 {
@@ -649,6 +650,10 @@ static inline void pwmchip_sysfs_export(struct pwm_chip *chip)
 static inline void pwmchip_sysfs_unexport(struct pwm_chip *chip)
 {
 }
+
+static inline void pwmchip_sysfs_unexport_children(struct pwm_chip *chip)
+{
+}
 #endif /* CONFIG_PWM_SYSFS */
 
 #endif /* __LINUX_PWM_H */