[ARM] S3C6400: serial support for S3C6400 and S3C6410 SoCs

Add support to the Samsung serial driver for the S3C6400
and S3C6410 serial ports.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

arch/arm/mach-s3c2410/include/mach/map.h

@@ -101,4 +101,6 @@
 #define S3C24XX_PA_SDI      S3C2410_PA_SDI
 #define S3C24XX_PA_NAND	    S3C2410_PA_NAND
 
+#define S3C_PA_UART	    S3C24XX_PA_UART
+
 #endif /* __ASM_ARCH_MAP_H */

arch/arm/mach-s3c24a0/include/mach/map.h

@@ -80,4 +80,6 @@
 #define S3C24XX_PA_SDI		S3C24A0_PA_SDI
 #define S3C24XX_PA_NAND		S3C24A0_PA_NAND
 
+#define S3C_PA_UART		S3C24A0_PA_UART
+
 #endif /* __ASM_ARCH_24A0_MAP_H */

arch/arm/plat-s3c/include/plat/regs-serial.h

@@ -77,6 +77,12 @@
 #define S3C2440_UCON_FCLK	  (3<<10)
 #define S3C2443_UCON_EPLL	  (3<<10)
 
+#define S3C6400_UCON_CLKMASK	(3<<10)
+#define S3C6400_UCON_PCLK	(0<<10)
+#define S3C6400_UCON_PCLK2	(2<<10)
+#define S3C6400_UCON_UCLK0	(1<<10)
+#define S3C6400_UCON_UCLK1	(3<<10)
+
 #define S3C2440_UCON2_FCLK_EN	  (1<<15)
 #define S3C2440_UCON0_DIVMASK	  (15 << 12)
 #define S3C2440_UCON1_DIVMASK	  (15 << 12)

drivers/serial/Kconfig

@@ -447,7 +447,7 @@ config SERIAL_CLPS711X_CONSOLE
 
 config SERIAL_SAMSUNG
 	tristate "Samsung SoC serial support"
-	depends on ARM && PLAT_S3C24XX
+	depends on ARM && PLAT_S3C
 	select SERIAL_CORE
 	help
 	  Support for the on-chip UARTs on the Samsung S3C24XX series CPUs,
@@ -515,6 +515,14 @@ config SERIAL_S3C24A0
 	help
 	  Serial port support for the Samsung S3C24A0 SoC
 
+config SERIAL_S3C6400
+	tristate "Samsung S3C6400/S3C6410 Serial port support"
+	depends on SERIAL_SAMSUNG && (CPU_S3C600 || CPU_S3C6410)
+	default y
+	help
+	  Serial port support for the Samsung S3C6400 and S3C6410
+	  SoCs
+
 config SERIAL_DZ
 	bool "DECstation DZ serial driver"
 	depends on MACH_DECSTATION && 32BIT

drivers/serial/Makefile

@@ -42,6 +42,7 @@ obj-$(CONFIG_SERIAL_S3C2410) += s3c2410.o
 obj-$(CONFIG_SERIAL_S3C2412) += s3c2412.o
 obj-$(CONFIG_SERIAL_S3C2440) += s3c2440.o
 obj-$(CONFIG_SERIAL_S3C24A0) += s3c24a0.o
+obj-$(CONFIG_SERIAL_S3C6400) += s3c6400.o
 obj-$(CONFIG_SERIAL_IP22_ZILOG) += ip22zilog.o
 obj-$(CONFIG_SERIAL_MUX) += mux.o
 obj-$(CONFIG_SERIAL_68328) += 68328serial.o

drivers/serial/s3c6400.c

+/* linux/drivers/serial/s3c6400.c
+ *
+ * Driver for Samsung S3C6400 and S3C6410 SoC onboard UARTs.
+ *
+ * Copyright 2008 Openmoko,  Inc.
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/module.h>
+#include <linux/ioport.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/serial.h>
+
+#include <asm/irq.h>
+#include <mach/hardware.h>
+
+#include <plat/regs-serial.h>
+
+#include "samsung.h"
+
+static int s3c6400_serial_setsource(struct uart_port *port,
+				    struct s3c24xx_uart_clksrc *clk)
+{
+	unsigned long ucon = rd_regl(port, S3C2410_UCON);
+
+	if (strcmp(clk->name, "uclk0") == 0) {
+		ucon &= ~S3C6400_UCON_CLKMASK;
+		ucon |= S3C6400_UCON_UCLK0;
+	} else if (strcmp(clk->name, "uclk1") == 0)
+		ucon |= S3C6400_UCON_UCLK1;
+	else if (strcmp(clk->name, "pclk") == 0) {
+		/* See notes about transitioning from UCLK to PCLK */
+		ucon &= ~S3C6400_UCON_UCLK0;
+	} else {
+		printk(KERN_ERR "unknown clock source %s\n", clk->name);
+		return -EINVAL;
+	}
+
+	wr_regl(port, S3C2410_UCON, ucon);
+	return 0;
+}
+
+
+static int s3c6400_serial_getsource(struct uart_port *port,
+				    struct s3c24xx_uart_clksrc *clk)
+{
+	u32 ucon = rd_regl(port, S3C2410_UCON);
+
+	clk->divisor = 1;
+
+	switch (ucon & S3C6400_UCON_CLKMASK) {
+	case S3C6400_UCON_UCLK0:
+		clk->name = "uclk0";
+		break;
+
+	case S3C6400_UCON_UCLK1:
+		clk->name = "uclk1";
+		break;
+
+	case S3C6400_UCON_PCLK:
+	case S3C6400_UCON_PCLK2:
+		clk->name = "pclk";
+		break;
+	}
+
+	return 0;
+}
+
+static int s3c6400_serial_resetport(struct uart_port *port,
+				    struct s3c2410_uartcfg *cfg)
+{
+	unsigned long ucon = rd_regl(port, S3C2410_UCON);
+
+	dbg("s3c6400_serial_resetport: port=%p (%08lx), cfg=%p\n",
+	    port, port->mapbase, cfg);
+
+	/* ensure we don't change the clock settings... */
+
+	ucon &= S3C6400_UCON_CLKMASK;
+
+	wr_regl(port, S3C2410_UCON,  ucon | cfg->ucon);
+	wr_regl(port, S3C2410_ULCON, cfg->ulcon);
+
+	/* reset both fifos */
+
+	wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH);
+	wr_regl(port, S3C2410_UFCON, cfg->ufcon);
+
+	return 0;
+}
+
+static struct s3c24xx_uart_info s3c6400_uart_inf = {
+	.name		= "Samsung S3C6400 UART",
+	.type		= PORT_S3C6400,
+	.fifosize	= 64,
+	.rx_fifomask	= S3C2440_UFSTAT_RXMASK,
+	.rx_fifoshift	= S3C2440_UFSTAT_RXSHIFT,
+	.rx_fifofull	= S3C2440_UFSTAT_RXFULL,
+	.tx_fifofull	= S3C2440_UFSTAT_TXFULL,
+	.tx_fifomask	= S3C2440_UFSTAT_TXMASK,
+	.tx_fifoshift	= S3C2440_UFSTAT_TXSHIFT,
+	.get_clksrc	= s3c6400_serial_getsource,
+	.set_clksrc	= s3c6400_serial_setsource,
+	.reset_port	= s3c6400_serial_resetport,
+};
+
+/* device management */
+
+static int s3c6400_serial_probe(struct platform_device *dev)
+{
+	dbg("s3c6400_serial_probe: dev=%p\n", dev);
+	return s3c24xx_serial_probe(dev, &s3c6400_uart_inf);
+}
+
+static struct platform_driver s3c6400_serial_drv = {
+	.probe		= s3c6400_serial_probe,
+	.remove		= s3c24xx_serial_remove,
+	.driver		= {
+		.name	= "s3c6400-uart",
+		.owner	= THIS_MODULE,
+	},
+};
+
+s3c24xx_console_init(&s3c6400_serial_drv, &s3c6400_uart_inf);
+
+static int __init s3c6400_serial_init(void)
+{
+	return s3c24xx_serial_init(&s3c6400_serial_drv, &s3c6400_uart_inf);
+}
+
+static void __exit s3c6400_serial_exit(void)
+{
+	platform_driver_unregister(&s3c6400_serial_drv);
+}
+
+module_init(s3c6400_serial_init);
+module_exit(s3c6400_serial_exit);
+
+MODULE_DESCRIPTION("Samsung S3C6400,S3C6410 SoC Serial port driver");
+MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:s3c6400-uart");

drivers/serial/samsung.c

@@ -47,9 +47,9 @@
 #include <asm/irq.h>
 
 #include <mach/hardware.h>
+#include <mach/map.h>
 
 #include <plat/regs-serial.h>
-#include <mach/regs-gpio.h>
 
 #include "samsung.h"
 
@@ -756,6 +756,8 @@ static const char *s3c24xx_serial_type(struct uart_port *port)
 		return "S3C2440";
 	case PORT_S3C2412:
 		return "S3C2412";
+	case PORT_S3C6400:
+		return "S3C6400/10";
 	default:
 		return NULL;
 	}
@@ -1034,8 +1036,8 @@ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport,
 
 	dbg("resource %p (%lx..%lx)\n", res, res->start, res->end);
 
-	port->mapbase	= res->start;
-	port->membase	= S3C24XX_VA_UART + (res->start - S3C24XX_PA_UART);
+	port->mapbase = res->start;
+	port->membase = S3C_VA_UART + res->start - (S3C_PA_UART & 0xfff00000);
 	ret = platform_get_irq(platdev, 0);
 	if (ret < 0)
 		port->irq = 0;

include/linux/serial_core.h

@@ -158,6 +158,8 @@
 /* SH-SCI */
 #define PORT_SCIFA	83
 
+#define PORT_S3C6400	84
+
 #ifdef __KERNEL__
 
 #include <linux/compiler.h>