Merge branch 'imx-for-2.6.36' of git://git.pengutronix.de/git/imx/linux-2.6

arch/arm/mach-mx25/eukrea_mbimxsd-baseboard.c

@@ -215,7 +215,7 @@ struct imx_ssi_platform_data eukrea_mbimxsd_ssi_pdata = {
  * Add platform devices present on this baseboard and init
  * them from CPU side as far as required to use them later on
  */
-void __init eukrea_mbimxsd_baseboard_init(void)
+void __init eukrea_mbimxsd25_baseboard_init(void)
 {
 	if (mxc_iomux_v3_setup_multiple_pads(eukrea_mbimxsd_pads,
 			ARRAY_SIZE(eukrea_mbimxsd_pads)))

arch/arm/mach-mx25/mach-cpuimx25.c

@@ -147,8 +147,8 @@ static void __init eukrea_cpuimx25_init(void)
 	if (!otg_mode_host)
 		mxc_register_device(&otg_udc_device, &otg_device_pdata);
 
-#ifdef CONFIG_MACH_EUKREA_MBIMXSD_BASEBOARD
-	eukrea_mbimxsd_baseboard_init();
+#ifdef CONFIG_MACH_EUKREA_MBIMXSD25_BASEBOARD
+	eukrea_mbimxsd25_baseboard_init();
 #endif
 }
 

arch/arm/mach-mx3/clock-imx35.c

@@ -155,7 +155,7 @@ static unsigned long get_rate_arm(void)
 
 	aad = &clk_consumer[(pdr0 >> 16) & 0xf];
 	if (aad->sel)
-		fref = fref * 2 / 3;
+		fref = fref * 3 / 4;
 
 	return fref / aad->arm;
 }
@@ -164,7 +164,7 @@ static unsigned long get_rate_ahb(struct clk *clk)
 {
 	unsigned long pdr0 = __raw_readl(CCM_BASE + CCM_PDR0);
 	struct arm_ahb_div *aad;
-	unsigned long fref = get_rate_mpll();
+	unsigned long fref = get_rate_arm();
 
 	aad = &clk_consumer[(pdr0 >> 16) & 0xf];
 
@@ -176,16 +176,11 @@ static unsigned long get_rate_ipg(struct clk *clk)
 	return get_rate_ahb(NULL) >> 1;
 }
 
-static unsigned long get_3_3_div(unsigned long in)
-{
-	return (((in >> 3) & 0x7) + 1) * ((in & 0x7) + 1);
-}
-
 static unsigned long get_rate_uart(struct clk *clk)
 {
 	unsigned long pdr3 = __raw_readl(CCM_BASE + CCM_PDR3);
 	unsigned long pdr4 = __raw_readl(CCM_BASE + CCM_PDR4);
-	unsigned long div = get_3_3_div(pdr4 >> 10);
+	unsigned long div = ((pdr4 >> 10) & 0x3f) + 1;
 
 	if (pdr3 & (1 << 14))
 		return get_rate_arm() / div;
@@ -216,7 +211,7 @@ static unsigned long get_rate_sdhc(struct clk *clk)
 		break;
 	}
 
-	return rate / get_3_3_div(div);
+	return rate / (div + 1);
 }
 
 static unsigned long get_rate_mshc(struct clk *clk)
@@ -270,7 +265,7 @@ static unsigned long get_rate_csi(struct clk *clk)
 	else
 		rate = get_rate_ppll();
 
-	return rate / get_3_3_div((pdr2 >> 16) & 0x3f);
+	return rate / (((pdr2 >> 16) & 0x3f) + 1);
 }
 
 static unsigned long get_rate_otg(struct clk *clk)
@@ -283,23 +278,49 @@ static unsigned long get_rate_otg(struct clk *clk)
 	else
 		rate = get_rate_ppll();
 
-	return rate / get_3_3_div((pdr4 >> 22) & 0x3f);
+	return rate / (((pdr4 >> 22) & 0x3f) + 1);
 }
 
 static unsigned long get_rate_ipg_per(struct clk *clk)
 {
 	unsigned long pdr0 = __raw_readl(CCM_BASE + CCM_PDR0);
 	unsigned long pdr4 = __raw_readl(CCM_BASE + CCM_PDR4);
-	unsigned long div1, div2;
+	unsigned long div;
 
 	if (pdr0 & (1 << 26)) {
-		div1 = (pdr4 >> 19) & 0x7;
-		div2 = (pdr4 >> 16) & 0x7;
-		return get_rate_arm() / ((div1 + 1) * (div2 + 1));
+		div = (pdr4 >> 16) & 0x3f;
+		return get_rate_arm() / (div + 1);
 	} else {
-		div1 = (pdr0 >> 12) & 0x7;
-		return get_rate_ahb(NULL) / div1;
+		div = (pdr0 >> 12) & 0x7;
+		return get_rate_ahb(NULL) / (div + 1);
+	}
+}
+
+static unsigned long get_rate_hsp(struct clk *clk)
+{
+	unsigned long hsp_podf = (__raw_readl(CCM_BASE + CCM_PDR0) >> 20) & 0x03;
+	unsigned long fref = get_rate_mpll();
+
+	if (fref > 400 * 1000 * 1000) {
+		switch (hsp_podf) {
+		case 0:
+			return fref >> 2;
+		case 1:
+			return fref >> 3;
+		case 2:
+			return fref / 3;
+		}
+	} else {
+		switch (hsp_podf) {
+		case 0:
+		case 2:
+			return fref / 3;
+		case 1:
+			return fref / 6;
+		}
 	}
+
+	return 0;
 }
 
 static int clk_cgr_enable(struct clk *clk)
@@ -359,7 +380,7 @@ DEFINE_CLOCK(i2c1_clk,   0, CCM_CGR1, 10, get_rate_ipg_per, NULL);
 DEFINE_CLOCK(i2c2_clk,   1, CCM_CGR1, 12, get_rate_ipg_per, NULL);
 DEFINE_CLOCK(i2c3_clk,   2, CCM_CGR1, 14, get_rate_ipg_per, NULL);
 DEFINE_CLOCK(iomuxc_clk, 0, CCM_CGR1, 16, NULL, NULL);
-DEFINE_CLOCK(ipu_clk,    0, CCM_CGR1, 18, get_rate_ahb, NULL);
+DEFINE_CLOCK(ipu_clk,    0, CCM_CGR1, 18, get_rate_hsp, NULL);
 DEFINE_CLOCK(kpp_clk,    0, CCM_CGR1, 20, get_rate_ipg, NULL);
 DEFINE_CLOCK(mlb_clk,    0, CCM_CGR1, 22, get_rate_ahb, NULL);
 DEFINE_CLOCK(mshc_clk,   0, CCM_CGR1, 24, get_rate_mshc, NULL);
@@ -485,10 +506,10 @@ static struct clk_lookup lookups[] = {
 
 int __init mx35_clocks_init()
 {
-	unsigned int ll = 0;
+	unsigned int cgr2 = 3 << 26, cgr3 = 0;
 
 #if defined(CONFIG_DEBUG_LL) && !defined(CONFIG_DEBUG_ICEDCC)
-	ll = (3 << 16);
+	cgr2 |= 3 << 16;
 #endif
 
 	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
@@ -499,8 +520,20 @@ int __init mx35_clocks_init()
 	__raw_writel((3 << 18), CCM_BASE + CCM_CGR0);
 	__raw_writel((3 << 2) | (3 << 4) | (3 << 6) | (3 << 8) | (3 << 16),
 			CCM_BASE + CCM_CGR1);
-	__raw_writel((3 << 26) | ll, CCM_BASE + CCM_CGR2);
-	__raw_writel(0, CCM_BASE + CCM_CGR3);
+
+	/*
+	 * Check if we came up in internal boot mode. If yes, we need some
+	 * extra clocks turned on, otherwise the MX35 boot ROM code will
+	 * hang after a watchdog reset.
+	 */
+	if (!(__raw_readl(CCM_BASE + CCM_RCSR) & (3 << 10))) {
+		/* Additionally turn on UART1, SCC, and IIM clocks */
+		cgr2 |= 3 << 16 | 3 << 4;
+		cgr3 |= 3 << 2;
+	}
+
+	__raw_writel(cgr2, CCM_BASE + CCM_CGR2);
+	__raw_writel(cgr3, CCM_BASE + CCM_CGR3);
 
 	mxc_timer_init(&gpt_clk,
 			MX35_IO_ADDRESS(MX35_GPT1_BASE_ADDR), MX35_INT_GPT);

arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c

@@ -216,7 +216,7 @@ struct imx_ssi_platform_data eukrea_mbimxsd_ssi_pdata = {
  * Add platform devices present on this baseboard and init
  * them from CPU side as far as required to use them later on
  */
-void __init eukrea_mbimxsd_baseboard_init(void)
+void __init eukrea_mbimxsd35_baseboard_init(void)
 {
 	if (mxc_iomux_v3_setup_multiple_pads(eukrea_mbimxsd_pads,
 			ARRAY_SIZE(eukrea_mbimxsd_pads)))

arch/arm/mach-mx3/mach-cpuimx35.c

@@ -201,8 +201,8 @@ static void __init mxc_board_init(void)
 	if (!otg_mode_host)
 		mxc_register_device(&mxc_otg_udc_device, &otg_device_pdata);
 
-#ifdef CONFIG_MACH_EUKREA_MBIMXSD_BASEBOARD
-	eukrea_mbimxsd_baseboard_init();
+#ifdef CONFIG_MACH_EUKREA_MBIMXSD35_BASEBOARD
+	eukrea_mbimxsd35_baseboard_init();
 #endif
 }
 

arch/arm/mach-mx5/clock-mx51.c

@@ -56,7 +56,7 @@ static void _clk_ccgr_disable(struct clk *clk)
 {
 	u32 reg;
 	reg = __raw_readl(clk->enable_reg);
-	reg &= ~(MXC_CCM_CCGRx_MOD_OFF << clk->enable_shift);
+	reg &= ~(MXC_CCM_CCGRx_CG_MASK << clk->enable_shift);
 	__raw_writel(reg, clk->enable_reg);
 
 }

arch/arm/plat-mxc/Kconfig

@@ -43,6 +43,7 @@ config ARCH_MXC91231
 config ARCH_MX5
 	bool "MX5-based"
 	select CPU_V7
+	select ARM_L1_CACHE_SHIFT_6
 	help
 	  This enables support for systems based on the Freescale i.MX51 family
 

arch/arm/plat-mxc/include/mach/eukrea-baseboards.h

@@ -37,9 +37,9 @@
  * mach-mx5/eukrea_mbimx51-baseboard.c for cpuimx51
  */
 
-extern void eukrea_mbimx25_baseboard_init(void);
+extern void eukrea_mbimxsd25_baseboard_init(void);
 extern void eukrea_mbimx27_baseboard_init(void);
-extern void eukrea_mbimx35_baseboard_init(void);
+extern void eukrea_mbimxsd35_baseboard_init(void);
 extern void eukrea_mbimx51_baseboard_init(void);
 
 #endif

arch/arm/plat-mxc/tzic.c

@@ -164,8 +164,9 @@ int tzic_enable_wake(int is_idle)
 		return -EAGAIN;
 
 	for (i = 0; i < 4; i++) {
-		v = is_idle ? __raw_readl(TZIC_ENSET0(i)) : wakeup_intr[i];
-		__raw_writel(v, TZIC_WAKEUP0(i));
+		v = is_idle ? __raw_readl(tzic_base + TZIC_ENSET0(i)) :
+			wakeup_intr[i];
+		__raw_writel(v, tzic_base + TZIC_WAKEUP0(i));
 	}
 
 	return 0;