Commit b6e23bb6 authored by Shawn Guo's avatar Shawn Guo

ARM: imx: remove imx_src_prepare_restart() call

There is ~10% possibility that the following emergency restart command
fails to reboot imx6q.

$ echo b > /proc/sysrq-trigger

The IMX restart routine mxc_restart() assumes that it will always run on
primary core, and will call imx_src_prepare_restart() to disable
secondary cores in order to get them come to online in the following
boot.  However, the assumption is only true for normal kernel_restart()
case where migrate_to_reboot_cpu() will be called to migrate to primary
core, but not necessarily true for emergency_restart() case.  So when
emergency_restart() calls into mxc_restart() on any secondary core,
system will hang immediately once imx_src_prepare_restart() is called
to disabled secondary cores.  Since emergency_restart() is defined as a
function that is safe to call in interrupt context, we cannot just call
migrate_to_reboot_cpu() to fix the issue.

Fortunately, we just found that the issue can be fixed at imx6q platform
level.  We used to call imx_src_prepare_restart() to disable all
secondary cores before resetting hardware.  Otherwise, the secondary
will fail come to online in the reboot.  However, we recently found that
after commit 6050d181 (ARM: imx: reset core along with enable/disable
operation) comes to play, we do not need to reset the secondary cores
any more.  That said, mxc_restart() now can run on any core to reboot
the system, as long as we remove the imx_src_prepare_restart() call from
mxc_restart().

So let's simply remove imx_src_prepare_restart() call to fix the above
emergency restart failure.
Reported-by: default avatarJiada Wang <jiada_wang@mentor.com>
Signed-off-by: default avatarShawn Guo <shawn.guo@linaro.org>
parent 9b3d4237
...@@ -127,11 +127,6 @@ static inline void imx_smp_prepare(void) {} ...@@ -127,11 +127,6 @@ static inline void imx_smp_prepare(void) {}
static inline void imx_scu_standby_enable(void) {} static inline void imx_scu_standby_enable(void) {}
#endif #endif
void imx_src_init(void); void imx_src_init(void);
#ifdef CONFIG_HAVE_IMX_SRC
void imx_src_prepare_restart(void);
#else
static inline void imx_src_prepare_restart(void) {}
#endif
void imx_gpc_init(void); void imx_gpc_init(void);
void imx_gpc_pre_suspend(void); void imx_gpc_pre_suspend(void);
void imx_gpc_post_resume(void); void imx_gpc_post_resume(void);
......
...@@ -115,21 +115,6 @@ void imx_set_cpu_arg(int cpu, u32 arg) ...@@ -115,21 +115,6 @@ void imx_set_cpu_arg(int cpu, u32 arg)
writel_relaxed(arg, src_base + SRC_GPR1 + cpu * 8 + 4); writel_relaxed(arg, src_base + SRC_GPR1 + cpu * 8 + 4);
} }
void imx_src_prepare_restart(void)
{
u32 val;
/* clear enable bits of secondary cores */
spin_lock(&scr_lock);
val = readl_relaxed(src_base + SRC_SCR);
val &= ~(0x7 << BP_SRC_SCR_CORE1_ENABLE);
writel_relaxed(val, src_base + SRC_SCR);
spin_unlock(&scr_lock);
/* clear persistent entry register of primary core */
writel_relaxed(0, src_base + SRC_GPR1);
}
void __init imx_src_init(void) void __init imx_src_init(void)
{ {
struct device_node *np; struct device_node *np;
......
...@@ -42,9 +42,6 @@ void mxc_restart(enum reboot_mode mode, const char *cmd) ...@@ -42,9 +42,6 @@ void mxc_restart(enum reboot_mode mode, const char *cmd)
{ {
unsigned int wcr_enable; unsigned int wcr_enable;
if (cpu_is_imx6q() || cpu_is_imx6dl())
imx_src_prepare_restart();
if (wdog_clk) if (wdog_clk)
clk_enable(wdog_clk); clk_enable(wdog_clk);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment