Commit b7789998 authored by Alex Dubov's avatar Alex Dubov Committed by Linus Torvalds

memstick: allow "set_param" method to return an error code

Some controllers (Jmicron, for instance) can report temporal failure
condition during power-on.  It is desirable to account for this using a
return value of "set_param" device method.  The return value can also be
handy to distinguish between supported and unsupported device parameters
in run time.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: default avatarAlex Dubov <oakad@yahoo.com>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
parent 01476001
......@@ -415,10 +415,14 @@ static struct memstick_dev *memstick_alloc_card(struct memstick_host *host)
return NULL;
}
static void memstick_power_on(struct memstick_host *host)
static int memstick_power_on(struct memstick_host *host)
{
host->set_param(host, MEMSTICK_POWER, MEMSTICK_POWER_ON);
host->set_param(host, MEMSTICK_INTERFACE, MEMSTICK_SERIAL);
int rc = host->set_param(host, MEMSTICK_POWER, MEMSTICK_POWER_ON);
if (!rc)
rc = host->set_param(host, MEMSTICK_INTERFACE, MEMSTICK_SERIAL);
return rc;
}
static void memstick_check(struct work_struct *work)
......@@ -573,10 +577,14 @@ EXPORT_SYMBOL(memstick_suspend_host);
*/
void memstick_resume_host(struct memstick_host *host)
{
int rc = 0;
mutex_lock(&host->lock);
if (host->card)
memstick_power_on(host);
rc = memstick_power_on(host);
mutex_unlock(&host->lock);
if (!rc)
memstick_detect_change(host);
}
EXPORT_SYMBOL(memstick_resume_host);
......
......@@ -609,36 +609,68 @@ static void jmb38x_ms_request(struct memstick_host *msh)
spin_unlock_irqrestore(&host->lock, flags);
}
static void jmb38x_ms_reset(struct jmb38x_ms_host *host)
static int jmb38x_ms_reset(struct jmb38x_ms_host *host)
{
unsigned int host_ctl = readl(host->addr + HOST_CONTROL);
int cnt;
writel(HOST_CONTROL_RESET_REQ | HOST_CONTROL_CLOCK_EN
| readl(host->addr + HOST_CONTROL),
host->addr + HOST_CONTROL);
mmiowb();
for (cnt = 0; cnt < 20; ++cnt) {
if (!(HOST_CONTROL_RESET_REQ
& readl(host->addr + HOST_CONTROL)))
goto reset_next;
ndelay(20);
}
dev_dbg(&host->chip->pdev->dev, "reset_req timeout\n");
return -EIO;
writel(HOST_CONTROL_RESET_REQ, host->addr + HOST_CONTROL);
reset_next:
writel(HOST_CONTROL_RESET | HOST_CONTROL_CLOCK_EN
| readl(host->addr + HOST_CONTROL),
host->addr + HOST_CONTROL);
mmiowb();
for (cnt = 0; cnt < 20; ++cnt) {
if (!(HOST_CONTROL_RESET
& readl(host->addr + HOST_CONTROL)))
goto reset_ok;
while (HOST_CONTROL_RESET_REQ
& (host_ctl = readl(host->addr + HOST_CONTROL))) {
ndelay(20);
dev_dbg(&host->chip->pdev->dev, "reset %08x\n", host_ctl);
}
dev_dbg(&host->chip->pdev->dev, "reset timeout\n");
return -EIO;
writel(HOST_CONTROL_RESET, host->addr + HOST_CONTROL);
reset_ok:
mmiowb();
writel(INT_STATUS_ALL, host->addr + INT_SIGNAL_ENABLE);
writel(INT_STATUS_ALL, host->addr + INT_STATUS_ENABLE);
return 0;
}
static void jmb38x_ms_set_param(struct memstick_host *msh,
static int jmb38x_ms_set_param(struct memstick_host *msh,
enum memstick_param param,
int value)
{
struct jmb38x_ms_host *host = memstick_priv(msh);
unsigned int host_ctl = readl(host->addr + HOST_CONTROL);
unsigned int clock_ctl = CLOCK_CONTROL_40MHZ, clock_delay = 0;
int rc = 0;
switch (param) {
case MEMSTICK_POWER:
if (value == MEMSTICK_POWER_ON) {
jmb38x_ms_reset(host);
rc = jmb38x_ms_reset(host);
if (rc)
return rc;
host_ctl = 7;
host_ctl |= HOST_CONTROL_POWER_EN
| HOST_CONTROL_CLOCK_EN;
writel(host_ctl, host->addr + HOST_CONTROL);
writel(host->id ? PAD_PU_PD_ON_MS_SOCK1
: PAD_PU_PD_ON_MS_SOCK0,
......@@ -647,11 +679,7 @@ static void jmb38x_ms_set_param(struct memstick_host *msh,
writel(PAD_OUTPUT_ENABLE_MS,
host->addr + PAD_OUTPUT_ENABLE);
host_ctl = 7;
host_ctl |= HOST_CONTROL_POWER_EN
| HOST_CONTROL_CLOCK_EN;
writel(host_ctl, host->addr + HOST_CONTROL);
msleep(10);
dev_dbg(&host->chip->pdev->dev, "power on\n");
} else if (value == MEMSTICK_POWER_OFF) {
host_ctl &= ~(HOST_CONTROL_POWER_EN
......@@ -660,7 +688,8 @@ static void jmb38x_ms_set_param(struct memstick_host *msh,
writel(0, host->addr + PAD_OUTPUT_ENABLE);
writel(PAD_PU_PD_OFF, host->addr + PAD_PU_PD);
dev_dbg(&host->chip->pdev->dev, "power off\n");
}
} else
return -EINVAL;
break;
case MEMSTICK_INTERFACE:
host_ctl &= ~(3 << HOST_CONTROL_IF_SHIFT);
......@@ -686,12 +715,14 @@ static void jmb38x_ms_set_param(struct memstick_host *msh,
host_ctl &= ~HOST_CONTROL_REI;
clock_ctl = CLOCK_CONTROL_60MHZ;
clock_delay = 0;
}
} else
return -EINVAL;
writel(host_ctl, host->addr + HOST_CONTROL);
writel(clock_ctl, host->addr + CLOCK_CONTROL);
writel(clock_delay, host->addr + CLOCK_DELAY);
break;
};
return 0;
}
#ifdef CONFIG_PM
......
......@@ -489,15 +489,12 @@ static void tifm_ms_request(struct memstick_host *msh)
return;
}
static void tifm_ms_set_param(struct memstick_host *msh,
static int tifm_ms_set_param(struct memstick_host *msh,
enum memstick_param param,
int value)
{
struct tifm_ms *host = memstick_priv(msh);
struct tifm_dev *sock = host->dev;
unsigned long flags;
spin_lock_irqsave(&sock->lock, flags);
switch (param) {
case MEMSTICK_POWER:
......@@ -512,7 +509,8 @@ static void tifm_ms_set_param(struct memstick_host *msh,
writel(TIFM_MS_SYS_FCLR | TIFM_MS_SYS_INTCLR,
sock->addr + SOCK_MS_SYSTEM);
writel(0xffffffff, sock->addr + SOCK_MS_STATUS);
}
} else
return -EINVAL;
break;
case MEMSTICK_INTERFACE:
if (value == MEMSTICK_SERIAL) {
......@@ -525,11 +523,12 @@ static void tifm_ms_set_param(struct memstick_host *msh,
writel(TIFM_CTRL_FAST_CLK
| readl(sock->addr + SOCK_CONTROL),
sock->addr + SOCK_CONTROL);
}
} else
return -EINVAL;
break;
};
spin_unlock_irqrestore(&sock->lock, flags);
return 0;
}
static void tifm_ms_abort(unsigned long data)
......
......@@ -284,7 +284,7 @@ struct memstick_host {
/* Notify the host that some requests are pending. */
void (*request)(struct memstick_host *host);
/* Set host IO parameters (power, clock, etc). */
void (*set_param)(struct memstick_host *host,
int (*set_param)(struct memstick_host *host,
enum memstick_param param,
int value);
unsigned long private[0] ____cacheline_aligned;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment