Commit b7ed78f5 authored by Sage Weil's avatar Sage Weil Committed by Al Viro

introduce sys_syncfs to sync a single file system

It is frequently useful to sync a single file system, instead of all
mounted file systems via sync(2):

 - On machines with many mounts, it is not at all uncommon for some of
   them to hang (e.g. unresponsive NFS server).  sync(2) will get stuck on
   those and may never get to the one you do care about (e.g., /).
 - Some applications write lots of data to the file system and then
   want to make sure it is flushed to disk.  Calling fsync(2) on each
   file introduces unnecessary ordering constraints that result in a large
   amount of sub-optimal writeback/flush/commit behavior by the file
   system.

There are currently two ways (that I know of) to sync a single super_block:

 - BLKFLSBUF ioctl on the block device: That also invalidates the bdev
   mapping, which isn't usually desirable, and doesn't work for non-block
   file systems.
 - 'mount -o remount,rw' will call sync_filesystem as an artifact of the
   current implemention.  Relying on this little-known side effect for
   something like data safety sounds foolish.

Both of these approaches require root privileges, which some applications
do not have (nor should they need?) given that sync(2) is an unprivileged
operation.

This patch introduces a new system call syncfs(2) that takes an fd and
syncs only the file system it references.  Maybe someday we can

 $ sync /some/path

and not get

 sync: ignoring all arguments

The syscall is motivated by comments by Al and Christoph at the last LSF.
syncfs(2) seems like an appropriate name given statfs(2).

A similar ioctl was also proposed a while back, see
	http://marc.info/?l=linux-fsdevel&m=127970513829285&w=2Signed-off-by: default avatarSage Weil <sage@newdream.net>
Signed-off-by: default avatarAl Viro <viro@zeniv.linux.org.uk>
parent 1bef8291
...@@ -847,4 +847,5 @@ ia32_sys_call_table: ...@@ -847,4 +847,5 @@ ia32_sys_call_table:
.quad sys_name_to_handle_at .quad sys_name_to_handle_at
.quad compat_sys_open_by_handle_at .quad compat_sys_open_by_handle_at
.quad compat_sys_clock_adjtime .quad compat_sys_clock_adjtime
.quad sys_syncfs
ia32_syscall_end: ia32_syscall_end:
...@@ -349,10 +349,11 @@ ...@@ -349,10 +349,11 @@
#define __NR_name_to_handle_at 341 #define __NR_name_to_handle_at 341
#define __NR_open_by_handle_at 342 #define __NR_open_by_handle_at 342
#define __NR_clock_adjtime 343 #define __NR_clock_adjtime 343
#define __NR_syncfs 344
#ifdef __KERNEL__ #ifdef __KERNEL__
#define NR_syscalls 344 #define NR_syscalls 345
#define __ARCH_WANT_IPC_PARSE_VERSION #define __ARCH_WANT_IPC_PARSE_VERSION
#define __ARCH_WANT_OLD_READDIR #define __ARCH_WANT_OLD_READDIR
......
...@@ -675,6 +675,8 @@ __SYSCALL(__NR_name_to_handle_at, sys_name_to_handle_at) ...@@ -675,6 +675,8 @@ __SYSCALL(__NR_name_to_handle_at, sys_name_to_handle_at)
__SYSCALL(__NR_open_by_handle_at, sys_open_by_handle_at) __SYSCALL(__NR_open_by_handle_at, sys_open_by_handle_at)
#define __NR_clock_adjtime 305 #define __NR_clock_adjtime 305
__SYSCALL(__NR_clock_adjtime, sys_clock_adjtime) __SYSCALL(__NR_clock_adjtime, sys_clock_adjtime)
#define __NR_syncfs 306
__SYSCALL(__NR_syncfs, sys_syncfs)
#ifndef __NO_STUBS #ifndef __NO_STUBS
#define __ARCH_WANT_OLD_READDIR #define __ARCH_WANT_OLD_READDIR
......
...@@ -343,3 +343,4 @@ ENTRY(sys_call_table) ...@@ -343,3 +343,4 @@ ENTRY(sys_call_table)
.long sys_name_to_handle_at .long sys_name_to_handle_at
.long sys_open_by_handle_at .long sys_open_by_handle_at
.long sys_clock_adjtime .long sys_clock_adjtime
.long sys_syncfs
...@@ -7,6 +7,7 @@ ...@@ -7,6 +7,7 @@
#include <linux/fs.h> #include <linux/fs.h>
#include <linux/slab.h> #include <linux/slab.h>
#include <linux/module.h> #include <linux/module.h>
#include <linux/namei.h>
#include <linux/sched.h> #include <linux/sched.h>
#include <linux/writeback.h> #include <linux/writeback.h>
#include <linux/syscalls.h> #include <linux/syscalls.h>
...@@ -128,6 +129,29 @@ void emergency_sync(void) ...@@ -128,6 +129,29 @@ void emergency_sync(void)
} }
} }
/*
* sync a single super
*/
SYSCALL_DEFINE1(syncfs, int, fd)
{
struct file *file;
struct super_block *sb;
int ret;
int fput_needed;
file = fget_light(fd, &fput_needed);
if (!file)
return -EBADF;
sb = file->f_dentry->d_sb;
down_read(&sb->s_umount);
ret = sync_filesystem(sb);
up_read(&sb->s_umount);
fput_light(file, fput_needed);
return ret;
}
/** /**
* vfs_fsync_range - helper to sync a range of data & metadata to disk * vfs_fsync_range - helper to sync a range of data & metadata to disk
* @file: file to sync * @file: file to sync
......
...@@ -652,9 +652,11 @@ __SYSCALL(__NR_name_to_handle_at, sys_name_to_handle_at) ...@@ -652,9 +652,11 @@ __SYSCALL(__NR_name_to_handle_at, sys_name_to_handle_at)
__SYSCALL(__NR_open_by_handle_at, sys_open_by_handle_at) __SYSCALL(__NR_open_by_handle_at, sys_open_by_handle_at)
#define __NR_clock_adjtime 266 #define __NR_clock_adjtime 266
__SYSCALL(__NR_clock_adjtime, sys_clock_adjtime) __SYSCALL(__NR_clock_adjtime, sys_clock_adjtime)
#define __NR_syncfs 264
__SYSCALL(__NR_syncfs, sys_syncfs)
#undef __NR_syscalls #undef __NR_syscalls
#define __NR_syscalls 267 #define __NR_syscalls 268
/* /*
* All syscalls below here should go away really, * All syscalls below here should go away really,
......
...@@ -825,6 +825,7 @@ asmlinkage long sys_fanotify_init(unsigned int flags, unsigned int event_f_flags ...@@ -825,6 +825,7 @@ asmlinkage long sys_fanotify_init(unsigned int flags, unsigned int event_f_flags
asmlinkage long sys_fanotify_mark(int fanotify_fd, unsigned int flags, asmlinkage long sys_fanotify_mark(int fanotify_fd, unsigned int flags,
u64 mask, int fd, u64 mask, int fd,
const char __user *pathname); const char __user *pathname);
asmlinkage long sys_syncfs(int fd);
int kernel_execve(const char *filename, const char *const argv[], const char *const envp[]); int kernel_execve(const char *filename, const char *const argv[], const char *const envp[]);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment