Commit b80eef95 authored by Geert Uytterhoeven's avatar Geert Uytterhoeven Committed by Linus Walleij

gpio: pcf857x: Propagate wake-up setting to parent irq controller

The pcf857x GPIO and interrupt controller uses dummy_irq_chip, which
does not implement irq_chip.irq_set_wake() and does not set
IRQCHIP_SKIP_SET_WAKE.

This causes two s2ram issues if wake-up is enabled for the pcf857x GPIO
pins:
  1. During resume from s2ram, the following warning is printed:

     WARNING: CPU: 0 PID: 1046 at kernel/irq/manage.c:537 irq_set_irq_wake+0x9c/0xf8()
     Unbalanced IRQ 113 wake disable

  2. Wake-up through the pcf857x GPIO pins may fail, as the parent
     interrupt controller may be suspended.

Migrate the pcf857x GPIO and interrupt controller from dummy_irq_chip to
its own irq_chip. This irq chip implements irq_chip.irq_set_wake() to
propagate its wake-up setting to the parent interrupt controller.

This fixes wake-up through gpio-keys on sh73a0/kzm9g, where the pcf857x
interrupt is cascaded to irq-renesas-intc-irqpin, and the latter must
not be suspended when wake-up is enabled.
Signed-off-by: default avatarGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
parent a39294bd
......@@ -204,6 +204,36 @@ static irqreturn_t pcf857x_irq(int irq, void *data)
return IRQ_HANDLED;
}
/*
* NOP functions
*/
static void noop(struct irq_data *data) { }
static unsigned int noop_ret(struct irq_data *data)
{
return 0;
}
static int pcf857x_irq_set_wake(struct irq_data *data, unsigned int on)
{
struct pcf857x *gpio = irq_data_get_irq_chip_data(data);
irq_set_irq_wake(gpio->client->irq, on);
return 0;
}
static struct irq_chip pcf857x_irq_chip = {
.name = "pcf857x",
.irq_startup = noop_ret,
.irq_shutdown = noop,
.irq_enable = noop,
.irq_disable = noop,
.irq_ack = noop,
.irq_mask = noop,
.irq_unmask = noop,
.irq_set_wake = pcf857x_irq_set_wake,
};
/*-------------------------------------------------------------------------*/
static int pcf857x_probe(struct i2c_client *client,
......@@ -317,8 +347,9 @@ static int pcf857x_probe(struct i2c_client *client,
/* Enable irqchip if we have an interrupt */
if (client->irq) {
status = gpiochip_irqchip_add(&gpio->chip, &dummy_irq_chip, 0,
handle_level_irq, IRQ_TYPE_NONE);
status = gpiochip_irqchip_add(&gpio->chip, &pcf857x_irq_chip,
0, handle_level_irq,
IRQ_TYPE_NONE);
if (status) {
dev_err(&client->dev, "cannot add irqchip\n");
goto fail_irq;
......@@ -331,7 +362,7 @@ static int pcf857x_probe(struct i2c_client *client,
if (status)
goto fail_irq;
gpiochip_set_chained_irqchip(&gpio->chip, &dummy_irq_chip,
gpiochip_set_chained_irqchip(&gpio->chip, &pcf857x_irq_chip,
client->irq, NULL);
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment