Commit b8978784 authored by Ben Dooks's avatar Ben Dooks Committed by Linus Torvalds

spi_s3c24xx: fix clock rate calculation

Currently the clock rate calculation may round as pleased, which means
that it is possible that we will round down and end up with a faster clock
rate than intended.

Change the calculation to use DIV_ROUND_UP() to ensure that we end up with
a clock rate either the same as or lower than the user requested one.
Signed-off-by: default avatarBen Dooks <ben@simtec.co.uk>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
parent b2503a94
...@@ -111,6 +111,7 @@ static int s3c24xx_spi_setupxfer(struct spi_device *spi, ...@@ -111,6 +111,7 @@ static int s3c24xx_spi_setupxfer(struct spi_device *spi,
unsigned int bpw; unsigned int bpw;
unsigned int hz; unsigned int hz;
unsigned int div; unsigned int div;
unsigned long clk;
bpw = t ? t->bits_per_word : spi->bits_per_word; bpw = t ? t->bits_per_word : spi->bits_per_word;
hz = t ? t->speed_hz : spi->max_speed_hz; hz = t ? t->speed_hz : spi->max_speed_hz;
...@@ -120,20 +121,16 @@ static int s3c24xx_spi_setupxfer(struct spi_device *spi, ...@@ -120,20 +121,16 @@ static int s3c24xx_spi_setupxfer(struct spi_device *spi,
return -EINVAL; return -EINVAL;
} }
div = clk_get_rate(hw->clk) / hz; clk = clk_get_rate(hw->clk);
div = DIV_ROUND_UP(clk, hz * 2) - 1;
/* is clk = pclk / (2 * (pre+1)), or is it
* clk = (pclk * 2) / ( pre + 1) */
div /= 2;
if (div > 0)
div -= 1;
if (div > 255) if (div > 255)
div = 255; div = 255;
dev_dbg(&spi->dev, "setting pre-scaler to %d (hz %d)\n", div, hz); dev_dbg(&spi->dev, "setting pre-scaler to %d (wanted %d, got %ld)\n",
div, hz, clk / (2 * (div + 1)));
writeb(div, hw->regs + S3C2410_SPPRE); writeb(div, hw->regs + S3C2410_SPPRE);
spin_lock(&hw->bitbang.lock); spin_lock(&hw->bitbang.lock);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment