Merge tag 'mmc-v4.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc

Pull MMC fixes from Ulf Hansson:
 "MMC core:
   - Fix mmc card initialization for hosts not supporting HW busy
     detection
   - Fix mmc_test for sending commands during non-blocking write

  MMC host:
   - mxs: Avoid using an uninitialized
   - sdhci: Restore enhanced strobe setting during runtime resume
   - sdhci: Fix a couple of reset related issues
   - dw_mmc: Fix a reset controller issue"

* tag 'mmc-v4.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: mxs: Initialize the spinlock prior to using it
  mmc: mmc: Use 500ms as the default generic CMD6 timeout
  mmc: mmc_test: Fix "Commands during non-blocking write" tests
  mmc: sdhci: Fix missing enhanced strobe setting during runtime resume
  mmc: sdhci: Reset cmd and data circuits after tuning failure
  mmc: sdhci: Fix unexpected data interrupt handling
  mmc: sdhci: Fix CMD line reset interfering with ongoing data transfer
  mmc: dw_mmc: add the "reset" as name of reset controller
  Documentation: synopsys-dw-mshc: add binding for reset-names

Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt

@@ -43,6 +43,9 @@ Optional properties:
   reset signal present internally in some host controller IC designs.
   See Documentation/devicetree/bindings/reset/reset.txt for details.
 
+* reset-names: request name for using "resets" property. Must be "reset".
+	(It will be used together with "resets" property.)
+
 * clocks: from common clock binding: handle to biu and ciu clocks for the
   bus interface unit clock and the card interface unit clock.
 
@@ -103,6 +106,8 @@ board specific portions as listed below.
 		interrupts = <0 75 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+		resets = <&rst 20>;
+		reset-names = "reset";
 	};
 
 [board specific internal DMA resources]

drivers/mmc/card/mmc_test.c

@@ -2347,7 +2347,7 @@ static int mmc_test_ongoing_transfer(struct mmc_test_card *test,
 	struct mmc_test_req *rq = mmc_test_req_alloc();
 	struct mmc_host *host = test->card->host;
 	struct mmc_test_area *t = &test->area;
-	struct mmc_async_req areq;
+	struct mmc_test_async_req test_areq = { .test = test };
 	struct mmc_request *mrq;
 	unsigned long timeout;
 	bool expired = false;
@@ -2363,8 +2363,8 @@ static int mmc_test_ongoing_transfer(struct mmc_test_card *test,
 		mrq->sbc = &rq->sbc;
 	mrq->cap_cmd_during_tfr = true;
 
-	areq.mrq = mrq;
-	areq.err_check = mmc_test_check_result_async;
+	test_areq.areq.mrq = mrq;
+	test_areq.areq.err_check = mmc_test_check_result_async;
 
 	mmc_test_prepare_mrq(test, mrq, t->sg, t->sg_len, dev_addr, t->blocks,
 			     512, write);
@@ -2378,7 +2378,7 @@ static int mmc_test_ongoing_transfer(struct mmc_test_card *test,
 
 	/* Start ongoing data request */
 	if (use_areq) {
-		mmc_start_req(host, &areq, &ret);
+		mmc_start_req(host, &test_areq.areq, &ret);
 		if (ret)
 			goto out_free;
 	} else {

drivers/mmc/core/mmc.c

@@ -26,6 +26,8 @@
 #include "mmc_ops.h"
 #include "sd_ops.h"
 
+#define DEFAULT_CMD6_TIMEOUT_MS	500
+
 static const unsigned int tran_exp[] = {
 	10000,		100000,		1000000,	10000000,
 	0,		0,		0,		0
@@ -571,6 +573,7 @@ static int mmc_decode_ext_csd(struct mmc_card *card, u8 *ext_csd)
 		card->erased_byte = 0x0;
 
 	/* eMMC v4.5 or later */
+	card->ext_csd.generic_cmd6_time = DEFAULT_CMD6_TIMEOUT_MS;
 	if (card->ext_csd.rev >= 6) {
 		card->ext_csd.feature_support |= MMC_DISCARD_FEATURE;
 

drivers/mmc/host/dw_mmc.c

@@ -2940,7 +2940,7 @@ static struct dw_mci_board *dw_mci_parse_dt(struct dw_mci *host)
 		return ERR_PTR(-ENOMEM);
 
 	/* find reset controller when exist */
-	pdata->rstc = devm_reset_control_get_optional(dev, NULL);
+	pdata->rstc = devm_reset_control_get_optional(dev, "reset");
 	if (IS_ERR(pdata->rstc)) {
 		if (PTR_ERR(pdata->rstc) == -EPROBE_DEFER)
 			return ERR_PTR(-EPROBE_DEFER);

drivers/mmc/host/mxs-mmc.c

@@ -661,13 +661,13 @@ static int mxs_mmc_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, mmc);
 
+	spin_lock_init(&host->lock);
+
 	ret = devm_request_irq(&pdev->dev, irq_err, mxs_mmc_irq_handler, 0,
 			       dev_name(&pdev->dev), host);
 	if (ret)
 		goto out_free_dma;
 
-	spin_lock_init(&host->lock);
-
 	ret = mmc_add_host(mmc);
 	if (ret)
 		goto out_free_dma;

drivers/mmc/host/sdhci.c

@@ -2086,6 +2086,10 @@ static int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode)
 
 		if (!host->tuning_done) {
 			pr_info(DRIVER_NAME ": Timeout waiting for Buffer Read Ready interrupt during tuning procedure, falling back to fixed sampling clock\n");
+
+			sdhci_do_reset(host, SDHCI_RESET_CMD);
+			sdhci_do_reset(host, SDHCI_RESET_DATA);
+
 			ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
 			ctrl &= ~SDHCI_CTRL_TUNED_CLK;
 			ctrl &= ~SDHCI_CTRL_EXEC_TUNING;
@@ -2286,11 +2290,9 @@ static bool sdhci_request_done(struct sdhci_host *host)
 
 	for (i = 0; i < SDHCI_MAX_MRQS; i++) {
 		mrq = host->mrqs_done[i];
-		if (mrq) {
-			host->mrqs_done[i] = NULL;
+		if (mrq)
 			break;
 	}
-	}
 
 	if (!mrq) {
 		spin_unlock_irqrestore(&host->lock, flags);
@@ -2320,6 +2322,17 @@ static bool sdhci_request_done(struct sdhci_host *host)
 	 * upon error conditions.
 	 */
 	if (sdhci_needs_reset(host, mrq)) {
+		/*
+		 * Do not finish until command and data lines are available for
+		 * reset. Note there can only be one other mrq, so it cannot
+		 * also be in mrqs_done, otherwise host->cmd and host->data_cmd
+		 * would both be null.
+		 */
+		if (host->cmd || host->data_cmd) {
+			spin_unlock_irqrestore(&host->lock, flags);
+			return true;
+		}
+
 		/* Some controllers need this kick or reset won't work here */
 		if (host->quirks & SDHCI_QUIRK_CLOCK_BEFORE_RESET)
 			/* This is to force an update */
@@ -2327,9 +2340,7 @@ static bool sdhci_request_done(struct sdhci_host *host)
 
 		/* Spec says we should do both at the same time, but Ricoh
 		   controllers do not like that. */
-		if (!host->cmd)
 		sdhci_do_reset(host, SDHCI_RESET_CMD);
-		if (!host->data_cmd)
 		sdhci_do_reset(host, SDHCI_RESET_DATA);
 
 		host->pending_reset = false;
@@ -2338,6 +2349,8 @@ static bool sdhci_request_done(struct sdhci_host *host)
 	if (!sdhci_has_requests(host))
 		sdhci_led_deactivate(host);
 
+	host->mrqs_done[i] = NULL;
+
 	mmiowb();
 	spin_unlock_irqrestore(&host->lock, flags);
 
@@ -2512,9 +2525,6 @@ static void sdhci_data_irq(struct sdhci_host *host, u32 intmask)
 	if (!host->data) {
 		struct mmc_command *data_cmd = host->data_cmd;
 
-		if (data_cmd)
-			host->data_cmd = NULL;
-
 		/*
 		 * The "data complete" interrupt is also used to
 		 * indicate that a busy state has ended. See comment
@@ -2522,11 +2532,13 @@ static void sdhci_data_irq(struct sdhci_host *host, u32 intmask)
 		 */
 		if (data_cmd && (data_cmd->flags & MMC_RSP_BUSY)) {
 			if (intmask & SDHCI_INT_DATA_TIMEOUT) {
+				host->data_cmd = NULL;
 				data_cmd->error = -ETIMEDOUT;
 				sdhci_finish_mrq(host, data_cmd->mrq);
 				return;
 			}
 			if (intmask & SDHCI_INT_DATA_END) {
+				host->data_cmd = NULL;
 				/*
 				 * Some cards handle busy-end interrupt
 				 * before the command completed, so make
@@ -2912,6 +2924,10 @@ int sdhci_runtime_resume_host(struct sdhci_host *host)
 		spin_unlock_irqrestore(&host->lock, flags);
 	}
 
+	if ((mmc->caps2 & MMC_CAP2_HS400_ES) &&
+	    mmc->ops->hs400_enhanced_strobe)
+		mmc->ops->hs400_enhanced_strobe(mmc, &mmc->ios);
+
 	spin_lock_irqsave(&host->lock, flags);
 
 	host->runtime_suspended = false;