Skip to content

L
linux
Commit b8c79f45 authored by Larry Finger's avatar Larry Finger Committed by Kalle Valo
Browse files
Options

rtlwifi: rtl8192de: Remove all instances of DBG_EMERG 

This is a step toward eliminating the RT_TRACE macros. Those calls that
have DBG_EMERG as the level are always logged, and they represent error
conditions, thus they are replaced with pr_err().
Signed-off-by: default avatarLarry Finger <Larry.Finger@lwfinger.net>
Cc: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: default avatarKalle Valo <kvalo@codeaurora.org>
parent 2d15acac
Show whitespace changes
Inline Side-by-side
Showing with 46 additions and 65 deletions
drivers/net/wireless/realtek/rtlwifi/rtl8192de/fw.c
View file @ b8c79f45
......@@ -126,8 +126,7 @@ static void _rtl92d_write_fw(struct ieee80211_hw *hw,
pagenums = size / FW_8192D_PAGE_SIZE;
remainSize = size % FW_8192D_PAGE_SIZE;
if (pagenums > 8) {
RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
"Page numbers should not greater then 8\n");
pr_err("Page numbers should not greater then 8\n");
}
for (page = 0; page < pagenums; page++) {
offset = page * FW_8192D_PAGE_SIZE;
......@@ -153,8 +152,7 @@ static int _rtl92d_fw_free_to_go(struct ieee80211_hw *hw)
} while ((counter++ < FW_8192D_POLLING_TIMEOUT_COUNT) &&
(!(value32 & FWDL_ChkSum_rpt)));
if (counter >= FW_8192D_POLLING_TIMEOUT_COUNT) {
RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
"chksum report faill ! REG_MCUFWDL:0x%08x\n",
pr_err("chksum report fail! REG_MCUFWDL:0x%08x\n",
value32);
return -EIO;
}
......@@ -327,8 +325,7 @@ int rtl92d_download_fw(struct ieee80211_hw *hw)
rtl_write_byte(rtlpriv, 0x1f, value);
spin_unlock_irqrestore(&globalmutex_for_fwdownload, flags);
if (err) {
RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
"fw is not ready to run!\n");
pr_err("fw is not ready to run!\n");
goto exit;
} else {
RT_TRACE(rtlpriv, COMP_FW, DBG_TRACE, "fw is ready to run!\n");
......@@ -407,8 +404,7 @@ static void _rtl92d_fill_h2c_command(struct ieee80211_hw *hw,
while (!bwrite_success) {
wait_writeh2c_limmit--;
if (wait_writeh2c_limmit == 0) {
RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
"Write H2C fail because no trigger for FW INT!\n");
pr_err("Write H2C fail because no trigger for FW INT!\n");
break;
}
boxnum = rtlhal->last_hmeboxnum;
......@@ -430,8 +426,8 @@ static void _rtl92d_fill_h2c_command(struct ieee80211_hw *hw,
box_extreg = REG_HMEBOX_EXT_3;
break;
default:
RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
"switch case %#x not processed\n", boxnum);
pr_err("switch case %#x not processed\n",
boxnum);
break;
}
isfw_read = _rtl92d_check_fw_read_last_h2c(hw, boxnum);
......@@ -507,8 +503,8 @@ static void _rtl92d_fill_h2c_command(struct ieee80211_hw *hw,
boxcontent[idx]);
break;
default:
RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
"switch case %#x not processed\n", cmd_len);
pr_err("switch case %#x not processed\n",
cmd_len);
break;
}
bwrite_success = true;
......
drivers/net/wireless/realtek/rtlwifi/rtl8192de/hw.c
View file @ b8c79f45
......@@ -163,8 +163,7 @@ void rtl92de_get_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
case HAL_DEF_WOWLAN:
break;
default:
RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
"switch case %#x not processed\n", variable);
pr_err("switch case %#x not processed\n", variable);
break;
}
}
......@@ -358,8 +357,7 @@ void rtl92de_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
acm_ctrl &= (~ACMHW_VOQEN);
break;
default:
RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
"switch case %#x not processed\n",
pr_err("switch case %#x not processed\n",
e_aci);
break;
}
......@@ -500,8 +498,7 @@ void rtl92de_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
break;
}
default:
RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
"switch case %#x not processed\n", variable);
pr_err("switch case %#x not processed\n", variable);
break;
}
}
......@@ -520,8 +517,7 @@ static bool _rtl92de_llt_write(struct ieee80211_hw *hw, u32 address, u32 data)
if (_LLT_NO_ACTIVE == _LLT_OP_VALUE(value))
break;
if (count > POLLING_LLT_THRESHOLD) {
RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
"Failed to polling write LLT done at address %d!\n",
pr_err("Failed to polling write LLT done at address %d!\n",
address);
status = false;
break;
......@@ -920,7 +916,7 @@ int rtl92de_hw_init(struct ieee80211_hw *hw)
/* rtlpriv->intf_ops->disable_aspm(hw); */
rtstatus = _rtl92de_init_mac(hw);
if (!rtstatus) {
RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "Init MAC failed\n");
pr_err("Init MAC failed\n");
err = 1;
spin_unlock_irqrestore(&globalmutex_for_power_and_efuse, flags);
return err;
......@@ -1119,11 +1115,8 @@ static int _rtl92de_set_media_status(struct ieee80211_hw *hw,
"Set Network type to AP!\n");
break;
default:
RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
"Network type %d not supported!\n", type);
pr_err("Network type %d not supported!\n", type);
return 1;
break;
}
rtl_write_byte(rtlpriv, MSR, bt_msr);
rtlpriv->cfg->ops->led_control(hw, ledaction);
......@@ -1732,7 +1725,7 @@ static void _rtl92de_efuse_update_chip_version(struct ieee80211_hw *hw)
break;
default:
chipver |= CHIP_92D_D_CUT;
RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG, "Unknown CUT!\n");
pr_err("Unknown CUT!\n");
break;
}
rtlpriv->rtlhal.version = chipver;
......@@ -1816,7 +1809,7 @@ void rtl92de_read_eeprom_info(struct ieee80211_hw *hw)
rtlefuse->autoload_failflag = false;
_rtl92de_read_adapter_info(hw);
} else {
RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "Autoload ERR!!\n");
pr_err("Autoload ERR!!\n");
}
return;
}
......@@ -2169,8 +2162,8 @@ void rtl92de_set_key(struct ieee80211_hw *hw, u32 key_index,
enc_algo = CAM_AES;
break;
default:
RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
"switch case %#x not processed\n", enc_algo);
pr_err("switch case %#x not processed\n",
enc_algo);
enc_algo = CAM_TKIP;
break;
}
......@@ -2186,9 +2179,7 @@ void rtl92de_set_key(struct ieee80211_hw *hw, u32 key_index,
entry_id = rtl_cam_get_free_entry(hw,
p_macaddr);
if (entry_id >= TOTAL_CAM_ENTRY) {
RT_TRACE(rtlpriv, COMP_SEC,
DBG_EMERG,
"Can not find free hw security cam entry\n");
pr_err("Can not find free hw security cam entry\n");
return;
}
} else {
......
drivers/net/wireless/realtek/rtlwifi/rtl8192de/led.c
View file @ b8c79f45
......@@ -66,8 +66,8 @@ void rtl92de_sw_led_on(struct ieee80211_hw *hw, struct rtl_led *pled)
rtl_write_byte(rtlpriv, REG_LEDCFG2, (ledcfg & 0x0f) | BIT(5));
break;
default:
RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
"switch case %#x not processed\n", pled->ledpin);
pr_err("switch case %#x not processed\n",
pled->ledpin);
break;
}
pled->ledon = true;
......@@ -101,8 +101,8 @@ void rtl92de_sw_led_off(struct ieee80211_hw *hw, struct rtl_led *pled)
rtl_write_byte(rtlpriv, REG_LEDCFG2, (ledcfg | BIT(3)));
break;
default:
RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
"switch case %#x not processed\n", pled->ledpin);
pr_err("switch case %#x not processed\n",
pled->ledpin);
break;
}
pled->ledon = false;
......
drivers/net/wireless/realtek/rtlwifi/rtl8192de/phy.c
View file @ b8c79f45
......@@ -716,7 +716,7 @@ static bool _rtl92d_phy_bb_config(struct ieee80211_hw *hw)
rtstatus = _rtl92d_phy_config_bb_with_headerfile(hw,
BASEBAND_CONFIG_PHY_REG);
if (!rtstatus) {
RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "Write BB Reg Fail!!\n");
pr_err("Write BB Reg Fail!!\n");
return false;
}
......@@ -731,13 +731,13 @@ static bool _rtl92d_phy_bb_config(struct ieee80211_hw *hw)
BASEBAND_CONFIG_PHY_REG);
}
if (!rtstatus) {
RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "BB_PG Reg Fail!!\n");
pr_err("BB_PG Reg Fail!!\n");
return false;
}
rtstatus = _rtl92d_phy_config_bb_with_headerfile(hw,
BASEBAND_CONFIG_AGC_TAB);
if (!rtstatus) {
RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "AGC Table Fail\n");
pr_err("AGC Table Fail\n");
return false;
}
rtlphy->cck_high_power = (bool) (rtl_get_bbreg(hw,
......@@ -833,8 +833,7 @@ bool rtl92d_phy_config_rf_with_headerfile(struct ieee80211_hw *hw,
break;
case RF90_PATH_C:
case RF90_PATH_D:
RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
"switch case %#x not processed\n", rfpath);
pr_err("switch case %#x not processed\n", rfpath);
break;
}
return true;
......@@ -987,8 +986,8 @@ void rtl92d_phy_set_bw_mode(struct ieee80211_hw *hw,
rtl_write_byte(rtlpriv, REG_RRSR + 2, reg_prsr_rsc);
break;
default:
RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
"unknown bandwidth: %#X\n", rtlphy->current_chan_bw);
pr_err("unknown bandwidth: %#X\n",
rtlphy->current_chan_bw);
break;
}
switch (rtlphy->current_chan_bw) {
......@@ -1019,8 +1018,8 @@ void rtl92d_phy_set_bw_mode(struct ieee80211_hw *hw,
HAL_PRIME_CHNL_OFFSET_LOWER) ? 2 : 1);
break;
default:
RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
"unknown bandwidth: %#X\n", rtlphy->current_chan_bw);
pr_err("unknown bandwidth: %#X\n",
rtlphy->current_chan_bw);
break;
}
......@@ -2842,8 +2841,7 @@ static bool _rtl92d_phy_sw_chnl_step_by_step(struct ieee80211_hw *hw,
rtl92d_phy_reload_iqk_setting(hw, channel);
break;
default:
RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
"switch case %#x not processed\n",
pr_err("switch case %#x not processed\n",
currentcmd->cmdid);
break;
}
......@@ -2956,8 +2954,7 @@ static void rtl92d_phy_set_io(struct ieee80211_hw *hw)
rtl92d_dm_write_dig(hw);
break;
default:
RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
"switch case %#x not processed\n",
pr_err("switch case %#x not processed\n",
rtlphy->current_io_type);
break;
}
......@@ -2988,8 +2985,8 @@ bool rtl92d_phy_set_io_cmd(struct ieee80211_hw *hw, enum io_type iotype)
postprocessing = true;
break;
default:
RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
"switch case %#x not processed\n", iotype);
pr_err("switch case %#x not processed\n",
iotype);
break;
}
} while (false);
......@@ -3176,8 +3173,8 @@ bool rtl92d_phy_set_rf_power_state(struct ieee80211_hw *hw,
_rtl92d_phy_set_rfsleep(hw);
break;
default:
RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
"switch case %#x not processed\n", rfpwr_state);
pr_err("switch case %#x not processed\n",
rfpwr_state);
bresult = false;
break;
}
......
drivers/net/wireless/realtek/rtlwifi/rtl8192de/rf.c
View file @ b8c79f45
......@@ -63,8 +63,7 @@ void rtl92d_phy_rf6052_set_bandwidth(struct ieee80211_hw *hw, u8 bandwidth)
}
break;
default:
RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
"unknown bandwidth: %#X\n", bandwidth);
pr_err("unknown bandwidth: %#X\n", bandwidth);
break;
}
}
......
drivers/net/wireless/realtek/rtlwifi/rtl8192de/sw.c
View file @ b8c79f45
......@@ -171,8 +171,7 @@ static int rtl92d_init_sw_vars(struct ieee80211_hw *hw)
/* for firmware buf */
rtlpriv->rtlhal.pfirmware = vzalloc(0x8000);
if (!rtlpriv->rtlhal.pfirmware) {
RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
"Can't alloc buffer for fw\n");
pr_err("Can't alloc buffer for fw\n");
return 1;
}
......@@ -185,8 +184,7 @@ static int rtl92d_init_sw_vars(struct ieee80211_hw *hw)
rtlpriv->io.dev, GFP_KERNEL, hw,
rtl_fw_cb);
if (err) {
RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
"Failed to request firmware!\n");
pr_err("Failed to request firmware!\n");
return 1;
}
......@@ -256,7 +254,7 @@ static struct rtl_mod_params rtl92de_mod_params = {
.inactiveps = true,
.swctrl_lps = true,
.fwctrl_lps = false,
.debug = DBG_EMERG,
.debug = 0,
};
static const struct rtl_hal_cfg rtl92de_hal_cfg = {
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7