Merge tag 'hwmon-for-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon updates from Guenter Roeck:

 - Add support for trace events to hwmon core

 - Add support for NCT6797D, NCT6798D, MAX31725/6, LTM4686

 - Support all AMD Family 15h Model 6xh and Model 7xh processors in
   k10temp driver

 - Convert ina3221 driver to _info API

 - Fixes, cleanups, and improvements in various drivers

* tag 'hwmon-for-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (46 commits)
  hwmon: (pmbus) Fix page count auto-detection.
  hwmon: (pmbus) remove redundant 'default n' from Kconfig
  hwmon: (core) Add trace events to _attr_show/store functions
  hwmon: (ina3221) Use _info API to register hwmon device
  hwmon: (npcm-750-pwm-fan) Change initial pwm target to 255
  hwmon: (ina3221) Validate shunt resistor value from DT
  hwmon: (tmp421) make const array 'names' static
  hwmon: (core) Add hwmon_in_enable attribute
  hwmon: (ina3221) mark PM functions as __maybe_unused
  hwmon: (ina3221) Read channel input source info from DT
  dt-bindings: hwmon: Add ina3221 documentation
  hwmon: (ina3221) Add suspend and resume functions
  hwmon: (ina3221) Fix INA3221_CONFIG_MODE macros
  hwmon: (ina3221) Add INA3221_CONFIG to volatile_table
  MAINTAINERS: Update PMBUS maintainer entry
  hwmon: (pwm-fan) Set fan speed to 0 on suspend
  hwmon: (pwm-fan) Silence error on probe deferral
  hwmon: (scpi-hwmon) remove redundant continue
  hwmon: (nct6775) Add support for NCT6798D
  hwmon: (nct6775) Add support for NCT6797D
  ...

Documentation/devicetree/bindings/hwmon/ina3221.txt

+Texas Instruments INA3221 Device Tree Bindings
+
+1) ina3221 node
+  Required properties:
+  - compatible: Must be "ti,ina3221"
+  - reg: I2C address
+
+  Optional properties:
+  = The node contains optional child nodes for three channels =
+  = Each child node describes the information of input source =
+
+  - #address-cells: Required only if a child node is present. Must be 1.
+  - #size-cells: Required only if a child node is present. Must be 0.
+
+2) child nodes
+  Required properties:
+  - reg: Must be 0, 1 or 2, corresponding to IN1, IN2 or IN3 port of INA3221
+
+  Optional properties:
+  - label: Name of the input source
+  - shunt-resistor-micro-ohms: Shunt resistor value in micro-Ohm
+
+Example:
+
+ina3221@40 {
+	compatible = "ti,ina3221";
+	reg = <0x40>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	input@0 {
+		reg = <0x0>;
+		status = "disabled";
+	};
+	input@1 {
+		reg = <0x1>;
+		shunt-resistor-micro-ohms = <5000>;
+	};
+	input@2 {
+		reg = <0x2>;
+		label = "VDD_5V";
+		shunt-resistor-micro-ohms = <5000>;
+	};
+};

Documentation/devicetree/bindings/hwmon/ltc2978.txt

@@ -15,6 +15,7 @@ Required properties:
   * "lltc,ltm2987"
   * "lltc,ltm4675"
   * "lltc,ltm4676"
+  * "lltc,ltm4686"
 - reg: I2C slave address
 
 Optional properties:
@@ -30,6 +31,7 @@ Valid names of regulators depend on number of supplies supported per device:
   * ltc3880, ltc3882, ltc3886 : vout0 - vout1
   * ltc3883 : vout0
   * ltm4676 : vout0 - vout1
+  * ltm4686 : vout0 - vout1
 
 Example:
 ltc2978@5e {

Documentation/hwmon/ina3221

@@ -21,6 +21,8 @@ and power are calculated host-side from these.
 Sysfs entries
 -------------
 
+in[123]_label           Voltage channel labels
+in[123]_enable          Voltage channel enable controls
 in[123]_input           Bus voltage(mV) channels
 curr[123]_input         Current(mA) measurement channels
 shunt[123]_resistor     Shunt resistance(uOhm) channels

Documentation/hwmon/lm75

@@ -17,8 +17,8 @@ Supported chips:
     Addresses scanned: none
     Datasheet: Publicly available at the Maxim website
                http://www.maximintegrated.com/
-  * Maxim MAX6625, MAX6626
-    Prefixes: 'max6625', 'max6626'
+  * Maxim MAX6625, MAX6626, MAX31725, MAX31726
+    Prefixes: 'max6625', 'max6626', 'max31725', 'max31726'
     Addresses scanned: none
     Datasheet: Publicly available at the Maxim website
                http://www.maxim-ic.com/
@@ -86,7 +86,7 @@ The LM75 is essentially an industry standard; there may be other
 LM75 clones not listed here, with or without various enhancements,
 that are supported. The clones are not detected by the driver, unless
 they reproduce the exact register tricks of the original LM75, and must
-therefore be instantiated explicitly. Higher resolution up to 12-bit
+therefore be instantiated explicitly. Higher resolution up to 16-bit
 is supported by this driver, other specific enhancements are not.
 
 The LM77 is not supported, contrary to what we pretended for a long time.

Documentation/hwmon/ltc2978

@@ -55,6 +55,10 @@ Supported chips:
     Prefix: 'ltm4676'
     Addresses scanned: -
     Datasheet: http://www.linear.com/product/ltm4676
+  * Analog Devices LTM4686
+    Prefix: 'ltm4686'
+    Addresses scanned: -
+    Datasheet: http://www.analog.com/ltm4686
 
 Author: Guenter Roeck <linux@roeck-us.net>
 
@@ -76,6 +80,7 @@ additional components on a single die. The chip is instantiated and reported
 as two separate chips on two different I2C bus addresses.
 LTM4675 is a dual 9A or single 18A μModule regulator
 LTM4676 is a dual 13A or single 26A uModule regulator.
+LTM4686 is a dual 10A or single 20A uModule regulator.
 
 
 Usage Notes

Documentation/hwmon/mc13783-adc

@@ -2,12 +2,12 @@ Kernel driver mc13783-adc
 =========================
 
 Supported chips:
-  * Freescale Atlas MC13783
+  * Freescale MC13783
     Prefix: 'mc13783'
-    Datasheet: http://www.freescale.com/files/rf_if/doc/data_sheet/MC13783.pdf?fsrch=1
-  * Freescale Atlas MC13892
+    Datasheet: https://www.nxp.com/docs/en/data-sheet/MC13783.pdf
+  * Freescale MC13892
     Prefix: 'mc13892'
-    Datasheet: http://cache.freescale.com/files/analog/doc/data_sheet/MC13892.pdf?fsrch=1&sr=1
+    Datasheet: https://www.nxp.com/docs/en/data-sheet/MC13892.pdf
 
 Authors:
     Sascha Hauer <s.hauer@pengutronix.de>

MAINTAINERS

@@ -6468,6 +6468,7 @@ F:	Documentation/devicetree/bindings/hwmon/
 F:	Documentation/hwmon/
 F:	drivers/hwmon/
 F:	include/linux/hwmon*.h
+F:	include/trace/events/hwmon*.h
 
 HARDWARE RANDOM NUMBER GENERATOR CORE
 M:	Matt Mackall <mpm@selenic.com>
@@ -8860,13 +8861,6 @@ S:	Maintained
 F:	Documentation/hwmon/max16065
 F:	drivers/hwmon/max16065.c
 
-MAX20751 HARDWARE MONITOR DRIVER
-M:	Guenter Roeck <linux@roeck-us.net>
-L:	linux-hwmon@vger.kernel.org
-S:	Maintained
-F:	Documentation/hwmon/max20751
-F:	drivers/hwmon/max20751.c
-
 MAX2175 SDR TUNER DRIVER
 M:	Ramesh Shanmugasundaram <ramesh.shanmugasundaram@bp.renesas.com>
 L:	linux-media@vger.kernel.org
@@ -11601,7 +11595,26 @@ W:	http://hwmon.wiki.kernel.org/
 W:	http://www.roeck-us.net/linux/drivers/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging.git
 S:	Maintained
+F:	Documentation/devicetree/bindings/hwmon/ibm,cffps1.txt
+F:	Documentation/devicetree/bindings/hwmon/max31785.txt
+F:	Documentation/devicetree/bindings/hwmon/ltc2978.txt
+F:	Documentation/hwmon/adm1275
+F:	Documentation/hwmon/ibm-cffps
+F:	Documentation/hwmon/ir35221
+F:	Documentation/hwmon/lm25066
+F:	Documentation/hwmon/ltc2978
+F:	Documentation/hwmon/ltc3815
+F:	Documentation/hwmon/max16064
+F:	Documentation/hwmon/max20751
+F:	Documentation/hwmon/max31785
+F:	Documentation/hwmon/max34440
+F:	Documentation/hwmon/max8688
 F:	Documentation/hwmon/pmbus
+F:	Documentation/hwmon/pmbus-core
+F:	Documentation/hwmon/tps40422
+F:	Documentation/hwmon/ucd9000
+F:	Documentation/hwmon/ucd9200
+F:	Documentation/hwmon/zl6100
 F:	drivers/hwmon/pmbus/
 F:	include/linux/pmbus.h
 

drivers/hwmon/aspeed-pwm-tacho.c

@@ -852,7 +852,7 @@ static int aspeed_create_pwm_cooling(struct device *dev,
 		dev_err(dev, "Property 'cooling-levels' cannot be read.\n");
 		return ret;
 	}
-	snprintf(cdev->name, MAX_CDEV_NAME_LEN, "%s%d", child->name, pwm_port);
+	snprintf(cdev->name, MAX_CDEV_NAME_LEN, "%pOFn%d", child, pwm_port);
 
 	cdev->tcdev = thermal_of_cooling_device_register(child,
 							 cdev->name,

drivers/hwmon/asus_atk0110.c

@@ -1210,10 +1210,8 @@ static int atk_register_hwmon(struct atk_data *data)
 	data->hwmon_dev = hwmon_device_register_with_groups(dev, "atk0110",
 							    data,
 							    data->attr_groups);
-	if (IS_ERR(data->hwmon_dev))
-		return PTR_ERR(data->hwmon_dev);
 
-	return 0;
+	return PTR_ERR_OR_ZERO(data->hwmon_dev);
 }
 
 static int atk_probe_if(struct atk_data *data)

drivers/hwmon/hwmon.c

@@ -24,6 +24,9 @@
 #include <linux/string.h>
 #include <linux/thermal.h>
 
+#define CREATE_TRACE_POINTS
+#include <trace/events/hwmon.h>
+
 #define HWMON_ID_PREFIX "hwmon"
 #define HWMON_ID_FORMAT HWMON_ID_PREFIX "%d"
 
@@ -171,6 +174,13 @@ static int hwmon_thermal_add_sensor(struct device *dev,
 }
 #endif /* IS_REACHABLE(CONFIG_THERMAL) && ... */
 
+static int hwmon_attr_base(enum hwmon_sensor_types type)
+{
+	if (type == hwmon_in)
+		return 0;
+	return 1;
+}
+
 /* sysfs attribute management */
 
 static ssize_t hwmon_attr_show(struct device *dev,
@@ -185,6 +195,9 @@ static ssize_t hwmon_attr_show(struct device *dev,
 	if (ret < 0)
 		return ret;
 
+	trace_hwmon_attr_show(hattr->index + hwmon_attr_base(hattr->type),
+			      hattr->name, val);
+
 	return sprintf(buf, "%ld\n", val);
 }
 
@@ -193,6 +206,7 @@ static ssize_t hwmon_attr_show_string(struct device *dev,
 				      char *buf)
 {
 	struct hwmon_device_attribute *hattr = to_hwmon_attr(devattr);
+	enum hwmon_sensor_types type = hattr->type;
 	const char *s;
 	int ret;
 
@@ -201,6 +215,9 @@ static ssize_t hwmon_attr_show_string(struct device *dev,
 	if (ret < 0)
 		return ret;
 
+	trace_hwmon_attr_show_string(hattr->index + hwmon_attr_base(type),
+				     hattr->name, s);
+
 	return sprintf(buf, "%s\n", s);
 }
 
@@ -221,14 +238,10 @@ static ssize_t hwmon_attr_store(struct device *dev,
 	if (ret < 0)
 		return ret;
 
-	return count;
-}
+	trace_hwmon_attr_store(hattr->index + hwmon_attr_base(hattr->type),
+			       hattr->name, val);
 
-static int hwmon_attr_base(enum hwmon_sensor_types type)
-{
-	if (type == hwmon_in)
-		return 0;
-	return 1;
+	return count;
 }
 
 static bool is_string_attr(enum hwmon_sensor_types type, u32 attr)
@@ -356,6 +369,7 @@ static const char * const hwmon_in_attr_templates[] = {
 	[hwmon_in_max_alarm] = "in%d_max_alarm",
 	[hwmon_in_lcrit_alarm] = "in%d_lcrit_alarm",
 	[hwmon_in_crit_alarm] = "in%d_crit_alarm",
+	[hwmon_in_enable] = "in%d_enable",
 };
 
 static const char * const hwmon_curr_attr_templates[] = {

drivers/hwmon/ibmpowernv.c

@@ -458,9 +458,6 @@ static int populate_attr_groups(struct platform_device *pdev)
 	for_each_child_of_node(opal, np) {
 		const char *label;
 
-		if (np->name == NULL)
-			continue;
-
 		type = get_sensor_type(np);
 		if (type == MAX_SENSOR_TYPE)
 			continue;
@@ -589,9 +586,6 @@ static int create_device_attrs(struct platform_device *pdev)
 		const char *label;
 		enum sensors type;
 
-		if (np->name == NULL)
-			continue;
-
 		type = get_sensor_type(np);
 		if (type == MAX_SENSOR_TYPE)
 			continue;
@@ -603,8 +597,8 @@ static int create_device_attrs(struct platform_device *pdev)
 		if (of_property_read_u32(np, "sensor-id", &sensor_id) &&
 		    of_property_read_u32(np, "sensor-data", &sensor_id)) {
 			dev_info(&pdev->dev,
-				 "'sensor-id' missing in the node '%s'\n",
-				 np->name);
+				 "'sensor-id' missing in the node '%pOFn'\n",
+				 np);
 			continue;
 		}
 

drivers/hwmon/iio_hwmon.c

@@ -65,13 +65,9 @@ static int iio_hwmon_probe(struct platform_device *pdev)
 	int in_i = 1, temp_i = 1, curr_i = 1, humidity_i = 1;
 	enum iio_chan_type type;
 	struct iio_channel *channels;
-	const char *name = "iio_hwmon";
 	struct device *hwmon_dev;
 	char *sname;
 
-	if (dev->of_node && dev->of_node->name)
-		name = dev->of_node->name;
-
 	channels = devm_iio_channel_get_all(dev);
 	if (IS_ERR(channels)) {
 		if (PTR_ERR(channels) == -ENODEV)
@@ -141,11 +137,15 @@ static int iio_hwmon_probe(struct platform_device *pdev)
 	st->attr_group.attrs = st->attrs;
 	st->groups[0] = &st->attr_group;
 
-	sname = devm_kstrdup(dev, name, GFP_KERNEL);
+	if (dev->of_node) {
+		sname = devm_kasprintf(dev, GFP_KERNEL, "%pOFn", dev->of_node);
 		if (!sname)
 			return -ENOMEM;
-
 		strreplace(sname, '-', '_');
+	} else {
+		sname = "iio_hwmon";
+	}
+
 	hwmon_dev = devm_hwmon_device_register_with_groups(dev, sname, st,
 							   st->groups);
 	return PTR_ERR_OR_ZERO(hwmon_dev);

drivers/hwmon/k10temp.c

@@ -325,8 +325,9 @@ static int k10temp_probe(struct pci_dev *pdev,
 
 	data->pdev = pdev;
 
-	if (boot_cpu_data.x86 == 0x15 && (boot_cpu_data.x86_model == 0x60 ||
-					  boot_cpu_data.x86_model == 0x70)) {
+	if (boot_cpu_data.x86 == 0x15 &&
+	    ((boot_cpu_data.x86_model & 0xf0) == 0x60 ||
+	     (boot_cpu_data.x86_model & 0xf0) == 0x70)) {
 		data->read_htcreg = read_htcreg_nb_f15;
 		data->read_tempreg = read_tempreg_nb_f15;
 	} else if (boot_cpu_data.x86 == 0x17) {

drivers/hwmon/lm75.c

@@ -47,6 +47,7 @@ enum lm75_type {		/* keep sorted in alphabetical order */
 	lm75b,
 	max6625,
 	max6626,
+	max31725,
 	mcp980x,
 	stds75,
 	tcn75,
@@ -64,7 +65,6 @@ enum lm75_type {		/* keep sorted in alphabetical order */
 static const unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b, 0x4c,
 					0x4d, 0x4e, 0x4f, I2C_CLIENT_END };
 
-
 /* The LM75 registers */
 #define LM75_REG_TEMP		0x00
 #define LM75_REG_CONF		0x01
@@ -76,7 +76,7 @@ struct lm75_data {
 	struct i2c_client	*client;
 	struct regmap		*regmap;
 	u8			orig_conf;
-	u8			resolution;	/* In bits, between 9 and 12 */
+	u8			resolution;	/* In bits, between 9 and 16 */
 	u8			resolution_limits;
 	unsigned int		sample_time;	/* In ms */
 };
@@ -339,6 +339,10 @@ lm75_probe(struct i2c_client *client, const struct i2c_device_id *id)
 		data->resolution_limits = 9;
 		data->sample_time = MSEC_PER_SEC / 4;
 		break;
+	case max31725:
+		data->resolution = 16;
+		data->sample_time = MSEC_PER_SEC / 8;
+		break;
 	case tcn75:
 		data->resolution = 9;
 		data->sample_time = MSEC_PER_SEC / 8;
@@ -415,6 +419,8 @@ static const struct i2c_device_id lm75_ids[] = {
 	{ "lm75b", lm75b, },
 	{ "max6625", max6625, },
 	{ "max6626", max6626, },
+	{ "max31725", max31725, },
+	{ "max31726", max31725, },
 	{ "mcp980x", mcp980x, },
 	{ "stds75", stds75, },
 	{ "tcn75", tcn75, },
@@ -471,6 +477,14 @@ static const struct of_device_id lm75_of_match[] = {
 		.compatible = "maxim,max6626",
 		.data = (void *)max6626
 	},
+	{
+		.compatible = "maxim,max31725",
+		.data = (void *)max31725
+	},
+	{
+		.compatible = "maxim,max31726",
+		.data = (void *)max31725
+	},
 	{
 		.compatible = "maxim,mcp980x",
 		.data = (void *)mcp980x

drivers/hwmon/lm92.c

@@ -127,8 +127,8 @@ static struct lm92_data *lm92_update_device(struct device *dev)
 
 	mutex_lock(&data->update_lock);
 
-	if (time_after(jiffies, data->last_updated + HZ)
-	 || !data->valid) {
+	if (time_after(jiffies, data->last_updated + HZ) ||
+	    !data->valid) {
 		dev_dbg(&client->dev, "Updating lm92 data\n");
 		for (i = 0; i < t_num_regs; i++) {
 			data->temp[i] =
@@ -178,6 +178,7 @@ static ssize_t show_temp_hyst(struct device *dev,
 {
 	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
 	struct lm92_data *data = lm92_update_device(dev);
+
 	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp[attr->index])
 		       - TEMP_FROM_REG(data->temp[t_hyst]));
 }
@@ -186,6 +187,7 @@ static ssize_t temp1_min_hyst_show(struct device *dev,
 				   struct device_attribute *attr, char *buf)
 {
 	struct lm92_data *data = lm92_update_device(dev);
+
 	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp[t_min])
 		       + TEMP_FROM_REG(data->temp[t_hyst]));
 }
@@ -218,6 +220,7 @@ static ssize_t alarms_show(struct device *dev, struct device_attribute *attr,
 			   char *buf)
 {
 	struct lm92_data *data = lm92_update_device(dev);
+
 	return sprintf(buf, "%d\n", ALARMS_FROM_REG(data->temp[t_input]));
 }
 
@@ -324,7 +327,6 @@ static int lm92_probe(struct i2c_client *new_client,
 	return PTR_ERR_OR_ZERO(hwmon_dev);
 }
 
-
 /*
  * Module and driver stuff
  */

drivers/hwmon/mc13783-adc.c

+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Driver for the ADC on Freescale Semiconductor MC13783 and MC13892 PMICs.
  *
  * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
  * Copyright (C) 2009 Sascha Hauer, Pengutronix
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc., 51
- * Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
  */
 
 #include <linux/mfd/mc13xxx.h>

drivers/hwmon/npcm750-pwm-fan.c

@@ -52,7 +52,7 @@
 
 /* Define the Counter Register, value = 100 for match 100% */
 #define NPCM7XX_PWM_COUNTER_DEFAULT_NUM		255
-#define NPCM7XX_PWM_CMR_DEFAULT_NUM		127
+#define NPCM7XX_PWM_CMR_DEFAULT_NUM		255
 #define NPCM7XX_PWM_CMR_MAX			255
 
 /* default all PWM channels PRESCALE2 = 1 */
@@ -861,7 +861,7 @@ static int npcm7xx_create_pwm_cooling(struct device *dev,
 		dev_err(dev, "Property 'cooling-levels' cannot be read.\n");
 		return ret;
 	}
-	snprintf(cdev->name, THERMAL_NAME_LENGTH, "%s%d", child->name,
+	snprintf(cdev->name, THERMAL_NAME_LENGTH, "%pOFn%d", child,
 		 pwm_port);
 
 	cdev->tcdev = thermal_of_cooling_device_register(child,

drivers/hwmon/pmbus/Kconfig

@@ -5,7 +5,6 @@
 menuconfig PMBUS
 	tristate "PMBus support"
 	depends on I2C
-	default n
 	help
 	  Say yes here if you want to enable PMBus support.
 
@@ -28,7 +27,6 @@ config SENSORS_PMBUS
 
 config SENSORS_ADM1275
 	tristate "Analog Devices ADM1275 and compatibles"
-	default n
 	help
 	  If you say yes here you get hardware monitoring support for Analog
 	  Devices ADM1075, ADM1272, ADM1275, ADM1276, ADM1278, ADM1293,
@@ -49,7 +47,6 @@ config SENSORS_IBM_CFFPS
 
 config SENSORS_IR35221
 	tristate "Infineon IR35221"
-	default n
 	help
 	  If you say yes here you get hardware monitoring support for the
 	  Infineon IR35221 controller.
@@ -59,7 +56,6 @@ config SENSORS_IR35221
 
 config SENSORS_LM25066
 	tristate "National Semiconductor LM25066 and compatibles"
-	default n
 	help
 	  If you say yes here you get hardware monitoring support for National
 	  Semiconductor LM25056, LM25066, LM5064, and LM5066.
@@ -69,7 +65,6 @@ config SENSORS_LM25066
 
 config SENSORS_LTC2978
 	tristate "Linear Technologies LTC2978 and compatibles"
-	default n
 	help
 	  If you say yes here you get hardware monitoring support for Linear
 	  Technology LTC2974, LTC2975, LTC2977, LTC2978, LTC2980, LTC3880,
@@ -83,11 +78,11 @@ config SENSORS_LTC2978_REGULATOR
 	depends on SENSORS_LTC2978 && REGULATOR
 	help
 	  If you say yes here you get regulator support for Linear
-	  Technology LTC2974, LTC2977, LTC2978, LTC3880, LTC3883, and LTM4676.
+	  Technology LTC2974, LTC2977, LTC2978, LTC3880, LTC3883, LTM4676
+	  and LTM4686.
 
 config SENSORS_LTC3815
 	tristate "Linear Technologies LTC3815"
-	default n
 	help
 	  If you say yes here you get hardware monitoring support for Linear
 	  Technology LTC3815.
@@ -97,7 +92,6 @@ config SENSORS_LTC3815
 
 config SENSORS_MAX16064
 	tristate "Maxim MAX16064"
-	default n
 	help
 	  If you say yes here you get hardware monitoring support for Maxim
 	  MAX16064.
@@ -107,7 +101,6 @@ config SENSORS_MAX16064
 
 config SENSORS_MAX20751
 	tristate "Maxim MAX20751"
-	default n
 	help
 	  If you say yes here you get hardware monitoring support for Maxim
 	  MAX20751.
@@ -117,7 +110,6 @@ config SENSORS_MAX20751
 
 config SENSORS_MAX31785
 	tristate "Maxim MAX31785 and compatibles"
-	default n
 	help
 	  If you say yes here you get hardware monitoring support for Maxim
 	  MAX31785.
@@ -127,7 +119,6 @@ config SENSORS_MAX31785
 
 config SENSORS_MAX34440
 	tristate "Maxim MAX34440 and compatibles"
-	default n
 	help
 	  If you say yes here you get hardware monitoring support for Maxim
 	  MAX34440, MAX34441, MAX34446, MAX34451, MAX34460, and MAX34461.
@@ -137,7 +128,6 @@ config SENSORS_MAX34440
 
 config SENSORS_MAX8688
 	tristate "Maxim MAX8688"
-	default n
 	help
 	  If you say yes here you get hardware monitoring support for Maxim
 	  MAX8688.
@@ -147,7 +137,6 @@ config SENSORS_MAX8688
 
 config SENSORS_TPS40422
 	tristate "TI TPS40422"
-	default n
 	help
 	  If you say yes here you get hardware monitoring support for TI
 	  TPS40422.
@@ -166,7 +155,6 @@ config SENSORS_TPS53679
 
 config SENSORS_UCD9000
 	tristate "TI UCD90120, UCD90124, UCD90160, UCD9090, UCD90910"
-	default n
 	help
 	  If you say yes here you get hardware monitoring support for TI
 	  UCD90120, UCD90124, UCD90160, UCD9090, UCD90910, Sequencer and System
@@ -177,7 +165,6 @@ config SENSORS_UCD9000
 
 config SENSORS_UCD9200
 	tristate "TI UCD9220, UCD9222, UCD9224, UCD9240, UCD9244, UCD9246, UCD9248"
-	default n
 	help
 	  If you say yes here you get hardware monitoring support for TI
 	  UCD9220, UCD9222, UCD9224, UCD9240, UCD9244, UCD9246, and UCD9248
@@ -188,7 +175,6 @@ config SENSORS_UCD9200
 
 config SENSORS_ZL6100
 	tristate "Intersil ZL6100 and compatibles"
-	default n
 	help
 	  If you say yes here you get hardware monitoring support for Intersil
 	  ZL2004, ZL2005, ZL2006, ZL2008, ZL2105, ZL2106, ZL6100, ZL6105,

drivers/hwmon/pmbus/ltc2978.c

@@ -4,6 +4,7 @@
  * Copyright (c) 2011 Ericsson AB.
  * Copyright (c) 2013, 2014, 2015 Guenter Roeck
  * Copyright (c) 2015 Linear Technology
+ * Copyright (c) 2018 Analog Devices Inc.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -28,7 +29,7 @@
 #include "pmbus.h"
 
 enum chips { ltc2974, ltc2975, ltc2977, ltc2978, ltc2980, ltc3880, ltc3882,
-	ltc3883, ltc3886, ltc3887, ltm2987, ltm4675, ltm4676 };
+	ltc3883, ltc3886, ltc3887, ltm2987, ltm4675, ltm4676, ltm4686 };
 
 /* Common for all chips */
 #define LTC2978_MFR_VOUT_PEAK		0xdd
@@ -81,6 +82,7 @@ enum chips { ltc2974, ltc2975, ltc2977, ltc2978, ltc2980, ltc3880, ltc3882,
 #define LTM4676_ID_REV1			0x4400
 #define LTM4676_ID_REV2			0x4480
 #define LTM4676A_ID			0x47e0
+#define LTM4686_ID			0x4770
 
 #define LTC2974_NUM_PAGES		4
 #define LTC2978_NUM_PAGES		8
@@ -512,6 +514,7 @@ static const struct i2c_device_id ltc2978_id[] = {
 	{"ltm2987", ltm2987},
 	{"ltm4675", ltm4675},
 	{"ltm4676", ltm4676},
+	{"ltm4686", ltm4686},
 	{}
 };
 MODULE_DEVICE_TABLE(i2c, ltc2978_id);
@@ -588,6 +591,8 @@ static int ltc2978_get_id(struct i2c_client *client)
 	else if (chip_id == LTM4676_ID_REV1 || chip_id == LTM4676_ID_REV2 ||
 		 chip_id == LTM4676A_ID)
 		return ltm4676;
+	else if (chip_id == LTM4686_ID)
+		return ltm4686;
 
 	dev_err(&client->dev, "Unsupported chip ID 0x%x\n", chip_id);
 	return -ENODEV;
@@ -684,6 +689,7 @@ static int ltc2978_probe(struct i2c_client *client,
 	case ltc3887:
 	case ltm4675:
 	case ltm4676:
+	case ltm4686:
 		data->features |= FEAT_CLEAR_PEAKS | FEAT_NEEDS_POLLING;
 		info->read_word_data = ltc3880_read_word_data;
 		info->pages = LTC3880_NUM_PAGES;
@@ -770,6 +776,7 @@ static const struct of_device_id ltc2978_of_match[] = {
 	{ .compatible = "lltc,ltm2987" },
 	{ .compatible = "lltc,ltm4675" },
 	{ .compatible = "lltc,ltm4676" },
+	{ .compatible = "lltc,ltm4686" },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, ltc2978_of_match);

drivers/hwmon/pmbus/pmbus.c

@@ -118,6 +118,8 @@ static int pmbus_identify(struct i2c_client *client,
 		} else {
 			info->pages = 1;
 		}
+
+		pmbus_clear_faults(client);
 	}
 
 	if (pmbus_check_byte_register(client, 0, PMBUS_VOUT_MODE)) {

drivers/hwmon/pmbus/pmbus_core.c

@@ -2015,7 +2015,10 @@ static int pmbus_init_common(struct i2c_client *client, struct pmbus_data *data,
 	if (ret >= 0 && (ret & PB_CAPABILITY_ERROR_CHECK))
 		client->flags |= I2C_CLIENT_PEC;
 
+	if (data->info->pages)
 		pmbus_clear_faults(client);
+	else
+		pmbus_clear_fault_page(client, -1);
 
 	if (info->identify) {
 		ret = (*info->identify)(client, info);

drivers/hwmon/pwm-fan.c

@@ -221,8 +221,12 @@ static int pwm_fan_probe(struct platform_device *pdev)
 
 	ctx->pwm = devm_of_pwm_get(&pdev->dev, pdev->dev.of_node, NULL);
 	if (IS_ERR(ctx->pwm)) {
-		dev_err(&pdev->dev, "Could not get PWM\n");
-		return PTR_ERR(ctx->pwm);
+		ret = PTR_ERR(ctx->pwm);
+
+		if (ret != -EPROBE_DEFER)
+			dev_err(&pdev->dev, "Could not get PWM: %d\n", ret);
+
+		return ret;
 	}
 
 	platform_set_drvdata(pdev, ctx);
@@ -290,9 +294,19 @@ static int pwm_fan_remove(struct platform_device *pdev)
 static int pwm_fan_suspend(struct device *dev)
 {
 	struct pwm_fan_ctx *ctx = dev_get_drvdata(dev);
+	struct pwm_args args;
+	int ret;
+
+	pwm_get_args(ctx->pwm, &args);
+
+	if (ctx->pwm_value) {
+		ret = pwm_config(ctx->pwm, 0, args.period);
+		if (ret < 0)
+			return ret;
 
-	if (ctx->pwm_value)
 		pwm_disable(ctx->pwm);
+	}
+
 	return 0;
 }
 

drivers/hwmon/scmi-hwmon.c

@@ -56,7 +56,7 @@ scmi_hwmon_is_visible(const void *drvdata, enum hwmon_sensor_types type,
 	const struct scmi_sensors *scmi_sensors = drvdata;
 
 	sensor = *(scmi_sensors->info[type] + channel);
-	if (sensor && sensor->name)
+	if (sensor)
 		return S_IRUGO;
 
 	return 0;

drivers/hwmon/scpi-hwmon.c

@@ -286,10 +286,8 @@ static int scpi_hwmon_probe(struct platform_device *pdev)
 		 * any thermal zones or if the thermal subsystem is
 		 * not configured.
 		 */
-		if (IS_ERR(z)) {
+		if (IS_ERR(z))
 			devm_kfree(dev, zone);
-			continue;
-		}
 	}
 
 	return 0;

drivers/hwmon/sht15.c

+// SPDX-License-Identifier: GPL-2.0
 /*
  * sht15.c - support for the SHT15 Temperature and Humidity Sensor
  *
@@ -9,10 +10,6 @@
  *
  * Copyright (c) 2007 Wouter Horre
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
  * For further information, see the Documentation/hwmon/sht15 file.
  */
 

drivers/hwmon/tmp421.c

@@ -226,8 +226,10 @@ static int tmp421_detect(struct i2c_client *client,
 {
 	enum chips kind;
 	struct i2c_adapter *adapter = client->adapter;
-	const char * const names[] = { "TMP421", "TMP422", "TMP423",
-				       "TMP441", "TMP442" };
+	static const char * const names[] = {
+		"TMP421", "TMP422", "TMP423",
+		"TMP441", "TMP442"
+	};
 	int addr = client->addr;
 	u8 reg;
 

include/linux/hwmon.h

@@ -118,6 +118,7 @@ enum hwmon_in_attributes {
 	hwmon_in_max_alarm,
 	hwmon_in_lcrit_alarm,
 	hwmon_in_crit_alarm,
+	hwmon_in_enable,
 };
 
 #define HWMON_I_INPUT		BIT(hwmon_in_input)
@@ -135,6 +136,7 @@ enum hwmon_in_attributes {
 #define HWMON_I_MAX_ALARM	BIT(hwmon_in_max_alarm)
 #define HWMON_I_LCRIT_ALARM	BIT(hwmon_in_lcrit_alarm)
 #define HWMON_I_CRIT_ALARM	BIT(hwmon_in_crit_alarm)
+#define HWMON_I_ENABLE		BIT(hwmon_in_enable)
 
 enum hwmon_curr_attributes {
 	hwmon_curr_input,

include/trace/events/hwmon.h

+/* SPDX-License-Identifier: GPL-2.0 */
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM hwmon
+
+#if !defined(_TRACE_HWMON_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_HWMON_H
+
+#include <linux/tracepoint.h>
+
+DECLARE_EVENT_CLASS(hwmon_attr_class,
+
+	TP_PROTO(int index, const char *attr_name, long val),
+
+	TP_ARGS(index, attr_name, val),
+
+	TP_STRUCT__entry(
+		__field(int, index)
+		__string(attr_name, attr_name)
+		__field(long, val)
+	),
+
+	TP_fast_assign(
+		__entry->index = index;
+		__assign_str(attr_name, attr_name);
+		__entry->val = val;
+	),
+
+	TP_printk("index=%d, attr_name=%s, val=%ld",
+		  __entry->index,  __get_str(attr_name), __entry->val)
+);
+
+DEFINE_EVENT(hwmon_attr_class, hwmon_attr_show,
+
+	TP_PROTO(int index, const char *attr_name, long val),
+
+	TP_ARGS(index, attr_name, val)
+);
+
+DEFINE_EVENT(hwmon_attr_class, hwmon_attr_store,
+
+	TP_PROTO(int index, const char *attr_name, long val),
+
+	TP_ARGS(index, attr_name, val)
+);
+
+TRACE_EVENT(hwmon_attr_show_string,
+
+	TP_PROTO(int index, const char *attr_name, const char *s),
+
+	TP_ARGS(index, attr_name, s),
+
+	TP_STRUCT__entry(
+		__field(int, index)
+		__string(attr_name, attr_name)
+		__string(label, s)
+	),
+
+	TP_fast_assign(
+		__entry->index = index;
+		__assign_str(attr_name, attr_name);
+		__assign_str(label, s);
+	),
+
+	TP_printk("index=%d, attr_name=%s, val=%s",
+		  __entry->index, __get_str(attr_name), __get_str(label))
+);
+
+#endif /* _TRACE_HWMON_H */
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>