Commit b90dc392 authored by Kishon Vijay Abraham I's avatar Kishon Vijay Abraham I Committed by Bjorn Helgaas

PCI: dwc: designware: Move register defines to designware header file

No functional change. Move the register defines and other macros from
pcie-designware.c to pcie-designware.h. This is in preparation to split the
pcie-designware.c file into designware core file and host-specific file.

While at that also fix a checkpatch warning.
Signed-off-by: default avatarKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: default avatarBjorn Helgaas <bhelgaas@google.com>
Reviewed-By: default avatarJoao Pinto <jpinto@synopsys.com>
parent 11a61a86
...@@ -25,76 +25,6 @@ ...@@ -25,76 +25,6 @@
#include "pcie-designware.h" #include "pcie-designware.h"
/* Parameters for the waiting for link up routine */
#define LINK_WAIT_MAX_RETRIES 10
#define LINK_WAIT_USLEEP_MIN 90000
#define LINK_WAIT_USLEEP_MAX 100000
/* Parameters for the waiting for iATU enabled routine */
#define LINK_WAIT_MAX_IATU_RETRIES 5
#define LINK_WAIT_IATU_MIN 9000
#define LINK_WAIT_IATU_MAX 10000
/* Synopsys-specific PCIe configuration registers */
#define PCIE_PORT_LINK_CONTROL 0x710
#define PORT_LINK_MODE_MASK (0x3f << 16)
#define PORT_LINK_MODE_1_LANES (0x1 << 16)
#define PORT_LINK_MODE_2_LANES (0x3 << 16)
#define PORT_LINK_MODE_4_LANES (0x7 << 16)
#define PORT_LINK_MODE_8_LANES (0xf << 16)
#define PCIE_LINK_WIDTH_SPEED_CONTROL 0x80C
#define PORT_LOGIC_SPEED_CHANGE (0x1 << 17)
#define PORT_LOGIC_LINK_WIDTH_MASK (0x1f << 8)
#define PORT_LOGIC_LINK_WIDTH_1_LANES (0x1 << 8)
#define PORT_LOGIC_LINK_WIDTH_2_LANES (0x2 << 8)
#define PORT_LOGIC_LINK_WIDTH_4_LANES (0x4 << 8)
#define PORT_LOGIC_LINK_WIDTH_8_LANES (0x8 << 8)
#define PCIE_MSI_ADDR_LO 0x820
#define PCIE_MSI_ADDR_HI 0x824
#define PCIE_MSI_INTR0_ENABLE 0x828
#define PCIE_MSI_INTR0_MASK 0x82C
#define PCIE_MSI_INTR0_STATUS 0x830
#define PCIE_ATU_VIEWPORT 0x900
#define PCIE_ATU_REGION_INBOUND (0x1 << 31)
#define PCIE_ATU_REGION_OUTBOUND (0x0 << 31)
#define PCIE_ATU_REGION_INDEX2 (0x2 << 0)
#define PCIE_ATU_REGION_INDEX1 (0x1 << 0)
#define PCIE_ATU_REGION_INDEX0 (0x0 << 0)
#define PCIE_ATU_CR1 0x904
#define PCIE_ATU_TYPE_MEM (0x0 << 0)
#define PCIE_ATU_TYPE_IO (0x2 << 0)
#define PCIE_ATU_TYPE_CFG0 (0x4 << 0)
#define PCIE_ATU_TYPE_CFG1 (0x5 << 0)
#define PCIE_ATU_CR2 0x908
#define PCIE_ATU_ENABLE (0x1 << 31)
#define PCIE_ATU_BAR_MODE_ENABLE (0x1 << 30)
#define PCIE_ATU_LOWER_BASE 0x90C
#define PCIE_ATU_UPPER_BASE 0x910
#define PCIE_ATU_LIMIT 0x914
#define PCIE_ATU_LOWER_TARGET 0x918
#define PCIE_ATU_BUS(x) (((x) & 0xff) << 24)
#define PCIE_ATU_DEV(x) (((x) & 0x1f) << 19)
#define PCIE_ATU_FUNC(x) (((x) & 0x7) << 16)
#define PCIE_ATU_UPPER_TARGET 0x91C
/*
* iATU Unroll-specific register definitions
* From 4.80 core version the address translation will be made by unroll
*/
#define PCIE_ATU_UNR_REGION_CTRL1 0x00
#define PCIE_ATU_UNR_REGION_CTRL2 0x04
#define PCIE_ATU_UNR_LOWER_BASE 0x08
#define PCIE_ATU_UNR_UPPER_BASE 0x0C
#define PCIE_ATU_UNR_LIMIT 0x10
#define PCIE_ATU_UNR_LOWER_TARGET 0x14
#define PCIE_ATU_UNR_UPPER_TARGET 0x18
/* Register address builder */
#define PCIE_GET_ATU_OUTB_UNR_REG_OFFSET(region) ((0x3 << 20) | (region << 9))
/* PCIe Port Logic registers */ /* PCIe Port Logic registers */
#define PLR_OFFSET 0x700 #define PLR_OFFSET 0x700
#define PCIE_PHY_DEBUG_R1 (PLR_OFFSET + 0x2c) #define PCIE_PHY_DEBUG_R1 (PLR_OFFSET + 0x2c)
......
...@@ -14,6 +14,77 @@ ...@@ -14,6 +14,77 @@
#ifndef _PCIE_DESIGNWARE_H #ifndef _PCIE_DESIGNWARE_H
#define _PCIE_DESIGNWARE_H #define _PCIE_DESIGNWARE_H
/* Parameters for the waiting for link up routine */
#define LINK_WAIT_MAX_RETRIES 10
#define LINK_WAIT_USLEEP_MIN 90000
#define LINK_WAIT_USLEEP_MAX 100000
/* Parameters for the waiting for iATU enabled routine */
#define LINK_WAIT_MAX_IATU_RETRIES 5
#define LINK_WAIT_IATU_MIN 9000
#define LINK_WAIT_IATU_MAX 10000
/* Synopsys-specific PCIe configuration registers */
#define PCIE_PORT_LINK_CONTROL 0x710
#define PORT_LINK_MODE_MASK (0x3f << 16)
#define PORT_LINK_MODE_1_LANES (0x1 << 16)
#define PORT_LINK_MODE_2_LANES (0x3 << 16)
#define PORT_LINK_MODE_4_LANES (0x7 << 16)
#define PORT_LINK_MODE_8_LANES (0xf << 16)
#define PCIE_LINK_WIDTH_SPEED_CONTROL 0x80C
#define PORT_LOGIC_SPEED_CHANGE (0x1 << 17)
#define PORT_LOGIC_LINK_WIDTH_MASK (0x1f << 8)
#define PORT_LOGIC_LINK_WIDTH_1_LANES (0x1 << 8)
#define PORT_LOGIC_LINK_WIDTH_2_LANES (0x2 << 8)
#define PORT_LOGIC_LINK_WIDTH_4_LANES (0x4 << 8)
#define PORT_LOGIC_LINK_WIDTH_8_LANES (0x8 << 8)
#define PCIE_MSI_ADDR_LO 0x820
#define PCIE_MSI_ADDR_HI 0x824
#define PCIE_MSI_INTR0_ENABLE 0x828
#define PCIE_MSI_INTR0_MASK 0x82C
#define PCIE_MSI_INTR0_STATUS 0x830
#define PCIE_ATU_VIEWPORT 0x900
#define PCIE_ATU_REGION_INBOUND (0x1 << 31)
#define PCIE_ATU_REGION_OUTBOUND (0x0 << 31)
#define PCIE_ATU_REGION_INDEX2 (0x2 << 0)
#define PCIE_ATU_REGION_INDEX1 (0x1 << 0)
#define PCIE_ATU_REGION_INDEX0 (0x0 << 0)
#define PCIE_ATU_CR1 0x904
#define PCIE_ATU_TYPE_MEM (0x0 << 0)
#define PCIE_ATU_TYPE_IO (0x2 << 0)
#define PCIE_ATU_TYPE_CFG0 (0x4 << 0)
#define PCIE_ATU_TYPE_CFG1 (0x5 << 0)
#define PCIE_ATU_CR2 0x908
#define PCIE_ATU_ENABLE (0x1 << 31)
#define PCIE_ATU_BAR_MODE_ENABLE (0x1 << 30)
#define PCIE_ATU_LOWER_BASE 0x90C
#define PCIE_ATU_UPPER_BASE 0x910
#define PCIE_ATU_LIMIT 0x914
#define PCIE_ATU_LOWER_TARGET 0x918
#define PCIE_ATU_BUS(x) (((x) & 0xff) << 24)
#define PCIE_ATU_DEV(x) (((x) & 0x1f) << 19)
#define PCIE_ATU_FUNC(x) (((x) & 0x7) << 16)
#define PCIE_ATU_UPPER_TARGET 0x91C
/*
* iATU Unroll-specific register definitions
* From 4.80 core version the address translation will be made by unroll
*/
#define PCIE_ATU_UNR_REGION_CTRL1 0x00
#define PCIE_ATU_UNR_REGION_CTRL2 0x04
#define PCIE_ATU_UNR_LOWER_BASE 0x08
#define PCIE_ATU_UNR_UPPER_BASE 0x0C
#define PCIE_ATU_UNR_LIMIT 0x10
#define PCIE_ATU_UNR_LOWER_TARGET 0x14
#define PCIE_ATU_UNR_UPPER_TARGET 0x18
/* Register address builder */
#define PCIE_GET_ATU_OUTB_UNR_REG_OFFSET(region) \
((0x3 << 20) | ((region) << 9))
/* /*
* Maximum number of MSI IRQs can be 256 per controller. But keep * Maximum number of MSI IRQs can be 256 per controller. But keep
* it 32 as of now. Probably we will never need more than 32. If needed, * it 32 as of now. Probably we will never need more than 32. If needed,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment