Skip to content

L
linux
Commit b95dd3ca authored by Jiri Kosina's avatar Jiri Kosina
Browse files
Options

Merge branch 'for-3.15/hid-core-ll-transport-cleanup' into for-3.15/sony

parents 2078b9bb c3d77fab
Hide whitespace changes
Inline Side-by-side
Showing with 1288 additions and 200 deletions
Documentation/hid/hid-transport.txt
View file @ b95dd3ca
......@@ -283,7 +283,8 @@ The available HID callbacks are:
int reqtype)
Same as ->request() but provides the report as raw buffer. This request shall
be synchronous. A transport driver must not use ->wait() to complete such
requests.
requests. This request is mandatory and hid core will reject the device if
it is missing.
- int (*output_report) (struct hid_device *hdev, __u8 *buf, size_t len)
Send raw output report via intr channel. Used by some HID device drivers
......
drivers/hid/Kconfig
View file @ b95dd3ca
......@@ -175,6 +175,15 @@ config HID_PRODIKEYS
multimedia keyboard, but will lack support for the musical keyboard
and some additional multimedia keys.
config HID_CP2112
tristate "Silicon Labs CP2112 HID USB-to-SMBus Bridge support"
depends on USB_HID && I2C && GPIOLIB
---help---
Support for Silicon Labs CP2112 HID USB to SMBus Master Bridge.
This is a HID device driver which registers as an i2c adapter
and gpiochip to expose these functions of the CP2112. The
customizable USB descriptor fields are exposed as sysfs attributes.
config HID_CYPRESS
tristate "Cypress mouse and barcode readers" if EXPERT
depends on HID
......
drivers/hid/Makefile
View file @ b95dd3ca
......@@ -41,6 +41,7 @@ obj-$(CONFIG_HID_AUREAL) += hid-aureal.o
obj-$(CONFIG_HID_BELKIN) += hid-belkin.o
obj-$(CONFIG_HID_CHERRY) += hid-cherry.o
obj-$(CONFIG_HID_CHICONY) += hid-chicony.o
obj-$(CONFIG_HID_CP2112) += hid-cp2112.o
obj-$(CONFIG_HID_CYPRESS) += hid-cypress.o
obj-$(CONFIG_HID_DRAGONRISE) += hid-dr.o
obj-$(CONFIG_HID_EMS_FF) += hid-emsff.o
......
drivers/hid/hid-core.c
View file @ b95dd3ca
......@@ -1248,6 +1248,11 @@ void hid_output_report(struct hid_report *report, __u8 *data)
}
EXPORT_SYMBOL_GPL(hid_output_report);
static int hid_report_len(struct hid_report *report)
{
return ((report->size - 1) >> 3) + 1 + (report->id > 0) + 7;
}
/*
* Allocator for buffer that is going to be passed to hid_output_report()
*/
......@@ -1258,7 +1263,7 @@ u8 *hid_alloc_report_buf(struct hid_report *report, gfp_t flags)
* of implement() working on 8 byte chunks
*/
int len = ((report->size - 1) >> 3) + 1 + (report->id > 0) + 7;
int len = hid_report_len(report);
return kmalloc(len, flags);
}
......@@ -1314,6 +1319,41 @@ static struct hid_report *hid_get_report(struct hid_report_enum *report_enum,
return report;
}
/*
* Implement a generic .request() callback, using .raw_request()
* DO NOT USE in hid drivers directly, but through hid_hw_request instead.
*/
void __hid_request(struct hid_device *hid, struct hid_report *report,
int reqtype)
{
char *buf;
int ret;
int len;
buf = hid_alloc_report_buf(report, GFP_KERNEL);
if (!buf)
return;
len = hid_report_len(report);
if (reqtype == HID_REQ_SET_REPORT)
hid_output_report(report, buf);
ret = hid->ll_driver->raw_request(hid, report->id, buf, len,
report->type, reqtype);
if (ret < 0) {
dbg_hid("unable to complete request: %d\n", ret);
goto out;
}
if (reqtype == HID_REQ_GET_REPORT)
hid_input_report(hid, report->type, buf, ret, 0);
out:
kfree(buf);
}
EXPORT_SYMBOL_GPL(__hid_request);
int hid_report_raw_event(struct hid_device *hid, int type, u8 *data, int size,
int interrupt)
{
......@@ -1692,6 +1732,7 @@ static const struct hid_device_id hid_have_special_driver[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_WIRELESS2) },
{ HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_AK1D) },
{ HID_USB_DEVICE(USB_VENDOR_ID_CREATIVELABS, USB_DEVICE_ID_PRODIKEYS_PCMIDI) },
{ HID_USB_DEVICE(USB_VENDOR_ID_CYGNAL, USB_DEVICE_ID_CYGNAL_CP2112) },
{ HID_USB_DEVICE(USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_BARCODE_1) },
{ HID_USB_DEVICE(USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_BARCODE_2) },
{ HID_USB_DEVICE(USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_BARCODE_3) },
......@@ -2428,6 +2469,14 @@ int hid_add_device(struct hid_device *hdev)
if (hid_ignore(hdev))
return -ENODEV;
/*
* Check for the mandatory transport channel.
*/
if (!hdev->ll_driver->raw_request) {
hid_err(hdev, "transport driver missing .raw_request()\n");
return -EINVAL;
}
/*
* Read the device report descriptor once and use as template
* for the driver-specific modifications.
......
drivers/hid/hid-cp2112.c 0 → 100644
View file @ b95dd3ca
/*
* hid-cp2112.c - Silicon Labs HID USB to SMBus master bridge
* Copyright (c) 2013,2014 Uplogix, Inc.
* David Barksdale <dbarksdale@uplogix.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*/
/*
* The Silicon Labs CP2112 chip is a USB HID device which provides an
* SMBus controller for talking to slave devices and 8 GPIO pins. The
* host communicates with the CP2112 via raw HID reports.
*
* Data Sheet:
* http://www.silabs.com/Support%20Documents/TechnicalDocs/CP2112.pdf
* Programming Interface Specification:
* http://www.silabs.com/Support%20Documents/TechnicalDocs/AN495.pdf
*/
#include <linux/gpio.h>
#include <linux/hid.h>
#include <linux/i2c.h>
#include <linux/module.h>
#include <linux/nls.h>
#include <linux/usb/ch9.h>
#include "hid-ids.h"
enum {
CP2112_GPIO_CONFIG = 0x02,
CP2112_GPIO_GET = 0x03,
CP2112_GPIO_SET = 0x04,
CP2112_GET_VERSION_INFO = 0x05,
CP2112_SMBUS_CONFIG = 0x06,
CP2112_DATA_READ_REQUEST = 0x10,
CP2112_DATA_WRITE_READ_REQUEST = 0x11,
CP2112_DATA_READ_FORCE_SEND = 0x12,
CP2112_DATA_READ_RESPONSE = 0x13,
CP2112_DATA_WRITE_REQUEST = 0x14,
CP2112_TRANSFER_STATUS_REQUEST = 0x15,
CP2112_TRANSFER_STATUS_RESPONSE = 0x16,
CP2112_CANCEL_TRANSFER = 0x17,
CP2112_LOCK_BYTE = 0x20,
CP2112_USB_CONFIG = 0x21,
CP2112_MANUFACTURER_STRING = 0x22,
CP2112_PRODUCT_STRING = 0x23,
CP2112_SERIAL_STRING = 0x24,
};
enum {
STATUS0_IDLE = 0x00,
STATUS0_BUSY = 0x01,
STATUS0_COMPLETE = 0x02,
STATUS0_ERROR = 0x03,
};
enum {
STATUS1_TIMEOUT_NACK = 0x00,
STATUS1_TIMEOUT_BUS = 0x01,
STATUS1_ARBITRATION_LOST = 0x02,
STATUS1_READ_INCOMPLETE = 0x03,
STATUS1_WRITE_INCOMPLETE = 0x04,
STATUS1_SUCCESS = 0x05,
};
struct cp2112_smbus_config_report {
u8 report; /* CP2112_SMBUS_CONFIG */
__be32 clock_speed; /* Hz */
u8 device_address; /* Stored in the upper 7 bits */
u8 auto_send_read; /* 1 = enabled, 0 = disabled */
__be16 write_timeout; /* ms, 0 = no timeout */
__be16 read_timeout; /* ms, 0 = no timeout */
u8 scl_low_timeout; /* 1 = enabled, 0 = disabled */
__be16 retry_time; /* # of retries, 0 = no limit */
} __packed;
struct cp2112_usb_config_report {
u8 report; /* CP2112_USB_CONFIG */
__le16 vid; /* Vendor ID */
__le16 pid; /* Product ID */
u8 max_power; /* Power requested in 2mA units */
u8 power_mode; /* 0x00 = bus powered
0x01 = self powered & regulator off
0x02 = self powered & regulator on */
u8 release_major;
u8 release_minor;
u8 mask; /* What fields to program */
} __packed;
struct cp2112_read_req_report {
u8 report; /* CP2112_DATA_READ_REQUEST */
u8 slave_address;
__be16 length;
} __packed;
struct cp2112_write_read_req_report {
u8 report; /* CP2112_DATA_WRITE_READ_REQUEST */
u8 slave_address;
__be16 length;
u8 target_address_length;
u8 target_address[16];
} __packed;
struct cp2112_write_req_report {
u8 report; /* CP2112_DATA_WRITE_REQUEST */
u8 slave_address;
u8 length;
u8 data[61];
} __packed;
struct cp2112_force_read_report {
u8 report; /* CP2112_DATA_READ_FORCE_SEND */
__be16 length;
} __packed;
struct cp2112_xfer_status_report {
u8 report; /* CP2112_TRANSFER_STATUS_RESPONSE */
u8 status0; /* STATUS0_* */
u8 status1; /* STATUS1_* */
__be16 retries;
__be16 length;
} __packed;
struct cp2112_string_report {
u8 dummy; /* force .string to be aligned */
u8 report; /* CP2112_*_STRING */
u8 length; /* length in bytes of everyting after .report */
u8 type; /* USB_DT_STRING */
wchar_t string[30]; /* UTF16_LITTLE_ENDIAN string */
} __packed;
/* Number of times to request transfer status before giving up waiting for a
transfer to complete. This may need to be changed if SMBUS clock, retries,
or read/write/scl_low timeout settings are changed. */
static const int XFER_STATUS_RETRIES = 10;
/* Time in ms to wait for a CP2112_DATA_READ_RESPONSE or
CP2112_TRANSFER_STATUS_RESPONSE. */
static const int RESPONSE_TIMEOUT = 50;
static const struct hid_device_id cp2112_devices[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_CYGNAL, USB_DEVICE_ID_CYGNAL_CP2112) },
{ }
};
MODULE_DEVICE_TABLE(hid, cp2112_devices);
struct cp2112_device {
struct i2c_adapter adap;
struct hid_device *hdev;
wait_queue_head_t wait;
u8 read_data[61];
u8 read_length;
int xfer_status;
atomic_t read_avail;
atomic_t xfer_avail;
struct gpio_chip gc;
};
static int gpio_push_pull = 0xFF;
module_param(gpio_push_pull, int, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(gpio_push_pull, "GPIO push-pull configuration bitmask");
static int cp2112_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
{
struct cp2112_device *dev = container_of(chip, struct cp2112_device,
gc);
struct hid_device *hdev = dev->hdev;
u8 buf[5];
int ret;
ret = hid_hw_raw_request(hdev, CP2112_GPIO_CONFIG, buf,
sizeof(buf), HID_FEATURE_REPORT,
HID_REQ_GET_REPORT);
if (ret != sizeof(buf)) {
hid_err(hdev, "error requesting GPIO config: %d\n", ret);
return ret;
}
buf[1] &= ~(1 << offset);
buf[2] = gpio_push_pull;
ret = hid_hw_raw_request(hdev, CP2112_GPIO_CONFIG, buf, sizeof(buf),
HID_FEATURE_REPORT, HID_REQ_SET_REPORT);
if (ret < 0) {
hid_err(hdev, "error setting GPIO config: %d\n", ret);
return ret;
}
return 0;
}
static void cp2112_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
{
struct cp2112_device *dev = container_of(chip, struct cp2112_device,
gc);
struct hid_device *hdev = dev->hdev;
u8 buf[3];
int ret;
buf[0] = CP2112_GPIO_SET;
buf[1] = value ? 0xff : 0;
buf[2] = 1 << offset;
ret = hid_hw_raw_request(hdev, CP2112_GPIO_SET, buf, sizeof(buf),
HID_FEATURE_REPORT, HID_REQ_SET_REPORT);
if (ret < 0)
hid_err(hdev, "error setting GPIO values: %d\n", ret);
}
static int cp2112_gpio_get(struct gpio_chip *chip, unsigned offset)
{
struct cp2112_device *dev = container_of(chip, struct cp2112_device,
gc);
struct hid_device *hdev = dev->hdev;
u8 buf[2];
int ret;
ret = hid_hw_raw_request(hdev, CP2112_GPIO_GET, buf, sizeof(buf),
HID_FEATURE_REPORT, HID_REQ_GET_REPORT);
if (ret != sizeof(buf)) {
hid_err(hdev, "error requesting GPIO values: %d\n", ret);
return ret;
}
return (buf[1] >> offset) & 1;
}
static int cp2112_gpio_direction_output(struct gpio_chip *chip,
unsigned offset, int value)
{
struct cp2112_device *dev = container_of(chip, struct cp2112_device,
gc);
struct hid_device *hdev = dev->hdev;
u8 buf[5];
int ret;
cp2112_gpio_set(chip, offset, value);
ret = hid_hw_raw_request(hdev, CP2112_GPIO_CONFIG, buf,
sizeof(buf), HID_FEATURE_REPORT,
HID_REQ_GET_REPORT);
if (ret != sizeof(buf)) {
hid_err(hdev, "error requesting GPIO config: %d\n", ret);
return ret;
}
buf[1] |= 1 << offset;
buf[2] = gpio_push_pull;
ret = hid_hw_raw_request(hdev, CP2112_GPIO_CONFIG, buf, sizeof(buf),
HID_FEATURE_REPORT, HID_REQ_SET_REPORT);
if (ret < 0) {
hid_err(hdev, "error setting GPIO config: %d\n", ret);
return ret;
}
return 0;
}
static int cp2112_hid_get(struct hid_device *hdev, unsigned char report_number,
u8 *data, size_t count, unsigned char report_type)
{
u8 *buf;
int ret;
buf = kmalloc(count, GFP_KERNEL);
if (!buf)
return -ENOMEM;
ret = hid_hw_raw_request(hdev, report_number, buf, count,
report_type, HID_REQ_GET_REPORT);
memcpy(data, buf, count);
kfree(buf);
return ret;
}
static int cp2112_hid_output(struct hid_device *hdev, u8 *data, size_t count,
unsigned char report_type)
{
u8 *buf;
int ret;
buf = kmemdup(data, count, GFP_KERNEL);
if (!buf)
return -ENOMEM;
if (report_type == HID_OUTPUT_REPORT)
ret = hid_hw_output_report(hdev, buf, count);
else
ret = hid_hw_raw_request(hdev, buf[0], buf, count, report_type,
HID_REQ_SET_REPORT);
kfree(buf);
return ret;
}
static int cp2112_wait(struct cp2112_device *dev, atomic_t *avail)
{
int ret = 0;
/* We have sent either a CP2112_TRANSFER_STATUS_REQUEST or a
* CP2112_DATA_READ_FORCE_SEND and we are waiting for the response to
* come in cp2112_raw_event or timeout. There will only be one of these
* in flight at any one time. The timeout is extremely large and is a
* last resort if the CP2112 has died. If we do timeout we don't expect
* to receive the response which would cause data races, it's not like
* we can do anything about it anyway.
*/
ret = wait_event_interruptible_timeout(dev->wait,
atomic_read(avail), msecs_to_jiffies(RESPONSE_TIMEOUT));
if (-ERESTARTSYS == ret)
return ret;
if (!ret)
return -ETIMEDOUT;
atomic_set(avail, 0);
return 0;
}
static int cp2112_xfer_status(struct cp2112_device *dev)
{
struct hid_device *hdev = dev->hdev;
u8 buf[2];
int ret;
buf[0] = CP2112_TRANSFER_STATUS_REQUEST;
buf[1] = 0x01;
atomic_set(&dev->xfer_avail, 0);
ret = cp2112_hid_output(hdev, buf, 2, HID_OUTPUT_REPORT);
if (ret < 0) {
hid_warn(hdev, "Error requesting status: %d\n", ret);
return ret;
}
ret = cp2112_wait(dev, &dev->xfer_avail);
if (ret)
return ret;
return dev->xfer_status;
}
static int cp2112_read(struct cp2112_device *dev, u8 *data, size_t size)
{
struct hid_device *hdev = dev->hdev;
struct cp2112_force_read_report report;
int ret;
report.report = CP2112_DATA_READ_FORCE_SEND;
report.length = cpu_to_be16(size);
atomic_set(&dev->read_avail, 0);
ret = cp2112_hid_output(hdev, &report.report, sizeof(report),
HID_OUTPUT_REPORT);
if (ret < 0) {
hid_warn(hdev, "Error requesting data: %d\n", ret);
return ret;
}
ret = cp2112_wait(dev, &dev->read_avail);
if (ret)
return ret;
hid_dbg(hdev, "read %d of %zd bytes requested\n",
dev->read_length, size);
if (size > dev->read_length)
size = dev->read_length;
memcpy(data, dev->read_data, size);
return dev->read_length;
}
static int cp2112_read_req(void *buf, u8 slave_address, u16 length)
{
struct cp2112_read_req_report *report = buf;
if (length < 1 || length > 512)
return -EINVAL;
report->report = CP2112_DATA_READ_REQUEST;
report->slave_address = slave_address << 1;
report->length = cpu_to_be16(length);
return sizeof(*report);
}
static int cp2112_write_read_req(void *buf, u8 slave_address, u16 length,
u8 command, u8 *data, u8 data_length)
{
struct cp2112_write_read_req_report *report = buf;
if (length < 1 || length > 512
|| data_length > sizeof(report->target_address) - 1)
return -EINVAL;
report->report = CP2112_DATA_WRITE_READ_REQUEST;
report->slave_address = slave_address << 1;
report->length = cpu_to_be16(length);
report->target_address_length = data_length + 1;
report->target_address[0] = command;
memcpy(&report->target_address[1], data, data_length);
return data_length + 6;
}
static int cp2112_write_req(void *buf, u8 slave_address, u8 command, u8 *data,
u8 data_length)
{
struct cp2112_write_req_report *report = buf;
if (data_length > sizeof(report->data) - 1)
return -EINVAL;
report->report = CP2112_DATA_WRITE_REQUEST;
report->slave_address = slave_address << 1;
report->length = data_length + 1;
report->data[0] = command;
memcpy(&report->data[1], data, data_length);
return data_length + 4;
}
static int cp2112_xfer(struct i2c_adapter *adap, u16 addr,
unsigned short flags, char read_write, u8 command,
int size, union i2c_smbus_data *data)
{
struct cp2112_device *dev = (struct cp2112_device *)adap->algo_data;
struct hid_device *hdev = dev->hdev;
u8 buf[64];
__be16 word;
ssize_t count;
size_t read_length = 0;
unsigned int retries;
int ret;
hid_dbg(hdev, "%s addr 0x%x flags 0x%x cmd 0x%x size %d\n",
read_write == I2C_SMBUS_WRITE ? "write" : "read",
addr, flags, command, size);
switch (size) {
case I2C_SMBUS_BYTE:
read_length = 1;
if (I2C_SMBUS_READ == read_write)
count = cp2112_read_req(buf, addr, read_length);
else
count = cp2112_write_req(buf, addr, data->byte, NULL,
0);
break;
case I2C_SMBUS_BYTE_DATA:
read_length = 1;
if (I2C_SMBUS_READ == read_write)
count = cp2112_write_read_req(buf, addr, read_length,
command, NULL, 0);
else
count = cp2112_write_req(buf, addr, command,
&data->byte, 1);
break;
case I2C_SMBUS_WORD_DATA:
read_length = 2;
word = cpu_to_be16(data->word);
if (I2C_SMBUS_READ == read_write)
count = cp2112_write_read_req(buf, addr, read_length,
command, NULL, 0);
else
count = cp2112_write_req(buf, addr, command,
(u8 *)&word, 2);
break;
case I2C_SMBUS_PROC_CALL:
size = I2C_SMBUS_WORD_DATA;
read_write = I2C_SMBUS_READ;
read_length = 2;
word = cpu_to_be16(data->word);
count = cp2112_write_read_req(buf, addr, read_length, command,
(u8 *)&word, 2);
break;
case I2C_SMBUS_I2C_BLOCK_DATA:
size = I2C_SMBUS_BLOCK_DATA;
/* fallthrough */
case I2C_SMBUS_BLOCK_DATA:
if (I2C_SMBUS_READ == read_write) {
count = cp2112_write_read_req(buf, addr,
I2C_SMBUS_BLOCK_MAX,
command, NULL, 0);
} else {
count = cp2112_write_req(buf, addr, command,
data->block,
data->block[0] + 1);
}
break;
case I2C_SMBUS_BLOCK_PROC_CALL:
size = I2C_SMBUS_BLOCK_DATA;
read_write = I2C_SMBUS_READ;
count = cp2112_write_read_req(buf, addr, I2C_SMBUS_BLOCK_MAX,
command, data->block,
data->block[0] + 1);
break;
default:
hid_warn(hdev, "Unsupported transaction %d\n", size);
return -EOPNOTSUPP;
}
if (count < 0)
return count;
ret = hid_hw_power(hdev, PM_HINT_FULLON);
if (ret < 0) {
hid_err(hdev, "power management error: %d\n", ret);
return ret;
}
ret = cp2112_hid_output(hdev, buf, count, HID_OUTPUT_REPORT);
if (ret < 0) {
hid_warn(hdev, "Error starting transaction: %d\n", ret);
goto power_normal;
}
for (retries = 0; retries < XFER_STATUS_RETRIES; ++retries) {
ret = cp2112_xfer_status(dev);
if (-EBUSY == ret)
continue;
if (ret < 0)
goto power_normal;
break;
}
if (XFER_STATUS_RETRIES <= retries) {
hid_warn(hdev, "Transfer timed out, cancelling.\n");
buf[0] = CP2112_CANCEL_TRANSFER;
buf[1] = 0x01;
ret = cp2112_hid_output(hdev, buf, 2, HID_OUTPUT_REPORT);
if (ret < 0)
hid_warn(hdev, "Error cancelling transaction: %d\n",
ret);
ret = -ETIMEDOUT;
goto power_normal;
}
if (I2C_SMBUS_WRITE == read_write) {
ret = 0;
goto power_normal;
}
if (I2C_SMBUS_BLOCK_DATA == size)
read_length = ret;
ret = cp2112_read(dev, buf, read_length);
if (ret < 0)
goto power_normal;
if (ret != read_length) {
hid_warn(hdev, "short read: %d < %zd\n", ret, read_length);
ret = -EIO;
goto power_normal;
}
switch (size) {
case I2C_SMBUS_BYTE:
case I2C_SMBUS_BYTE_DATA:
data->byte = buf[0];
break;
case I2C_SMBUS_WORD_DATA:
data->word = be16_to_cpup((__be16 *)buf);
break;
case I2C_SMBUS_BLOCK_DATA:
if (read_length > I2C_SMBUS_BLOCK_MAX) {
ret = -EPROTO;
goto power_normal;
}
memcpy(data->block, buf, read_length);
break;
}
ret = 0;
power_normal:
hid_hw_power(hdev, PM_HINT_NORMAL);
hid_dbg(hdev, "transfer finished: %d\n", ret);
return ret;
}
static u32 cp2112_functionality(struct i2c_adapter *adap)
{
return I2C_FUNC_SMBUS_BYTE |
I2C_FUNC_SMBUS_BYTE_DATA |
I2C_FUNC_SMBUS_WORD_DATA |
I2C_FUNC_SMBUS_BLOCK_DATA |
I2C_FUNC_SMBUS_I2C_BLOCK |
I2C_FUNC_SMBUS_PROC_CALL |
I2C_FUNC_SMBUS_BLOCK_PROC_CALL;
}
static const struct i2c_algorithm smbus_algorithm = {
.smbus_xfer = cp2112_xfer,
.functionality = cp2112_functionality,
};
static int cp2112_get_usb_config(struct hid_device *hdev,
struct cp2112_usb_config_report *cfg)
{
int ret;
ret = cp2112_hid_get(hdev, CP2112_USB_CONFIG, (u8 *)cfg, sizeof(*cfg),
HID_FEATURE_REPORT);
if (ret != sizeof(*cfg)) {
hid_err(hdev, "error reading usb config: %d\n", ret);
if (ret < 0)
return ret;
return -EIO;
}
return 0;
}
static int cp2112_set_usb_config(struct hid_device *hdev,
struct cp2112_usb_config_report *cfg)
{
int ret;
BUG_ON(cfg->report != CP2112_USB_CONFIG);
ret = cp2112_hid_output(hdev, (u8 *)cfg, sizeof(*cfg),
HID_FEATURE_REPORT);
if (ret != sizeof(*cfg)) {
hid_err(hdev, "error writing usb config: %d\n", ret);
if (ret < 0)
return ret;
return -EIO;
}
return 0;
}
static void chmod_sysfs_attrs(struct hid_device *hdev);
#define CP2112_CONFIG_ATTR(name, store, format, ...) \
static ssize_t name##_store(struct device *kdev, \
struct device_attribute *attr, const char *buf, \
size_t count) \
{ \
struct hid_device *hdev = container_of(kdev, struct hid_device, dev); \
struct cp2112_usb_config_report cfg; \
int ret = cp2112_get_usb_config(hdev, &cfg); \
if (ret) \
return ret; \
store; \
ret = cp2112_set_usb_config(hdev, &cfg); \
if (ret) \
return ret; \
chmod_sysfs_attrs(hdev); \
return count; \
} \
static ssize_t name##_show(struct device *kdev, \
struct device_attribute *attr, char *buf) \
{ \
struct hid_device *hdev = container_of(kdev, struct hid_device, dev); \
struct cp2112_usb_config_report cfg; \
int ret = cp2112_get_usb_config(hdev, &cfg); \
if (ret) \
return ret; \
return scnprintf(buf, PAGE_SIZE, format, ##__VA_ARGS__); \
} \
static DEVICE_ATTR_RW(name);
CP2112_CONFIG_ATTR(vendor_id, ({
u16 vid;
if (sscanf(buf, "%hi", &vid) != 1)
return -EINVAL;
cfg.vid = cpu_to_le16(vid);
cfg.mask = 0x01;
}), "0x%04x\n", le16_to_cpu(cfg.vid));
CP2112_CONFIG_ATTR(product_id, ({
u16 pid;
if (sscanf(buf, "%hi", &pid) != 1)
return -EINVAL;
cfg.pid = cpu_to_le16(pid);
cfg.mask = 0x02;
}), "0x%04x\n", le16_to_cpu(cfg.pid));
CP2112_CONFIG_ATTR(max_power, ({
int mA;
if (sscanf(buf, "%i", &mA) != 1)
return -EINVAL;
cfg.max_power = (mA + 1) / 2;
cfg.mask = 0x04;
}), "%u mA\n", cfg.max_power * 2);
CP2112_CONFIG_ATTR(power_mode, ({
if (sscanf(buf, "%hhi", &cfg.power_mode) != 1)
return -EINVAL;
cfg.mask = 0x08;
}), "%u\n", cfg.power_mode);
CP2112_CONFIG_ATTR(release_version, ({
if (sscanf(buf, "%hhi.%hhi", &cfg.release_major, &cfg.release_minor)
!= 2)
return -EINVAL;
cfg.mask = 0x10;
}), "%u.%u\n", cfg.release_major, cfg.release_minor);
#undef CP2112_CONFIG_ATTR
struct cp2112_pstring_attribute {
struct device_attribute attr;
unsigned char report;
};
static ssize_t pstr_store(struct device *kdev,
struct device_attribute *kattr, const char *buf,
size_t count)
{
struct hid_device *hdev = container_of(kdev, struct hid_device, dev);
struct cp2112_pstring_attribute *attr =
container_of(kattr, struct cp2112_pstring_attribute, attr);
struct cp2112_string_report report;
int ret;
memset(&report, 0, sizeof(report));
ret = utf8s_to_utf16s(buf, count, UTF16_LITTLE_ENDIAN,
report.string, ARRAY_SIZE(report.string));
report.report = attr->report;
report.length = ret * sizeof(report.string[0]) + 2;
report.type = USB_DT_STRING;
ret = cp2112_hid_output(hdev, &report.report, report.length + 1,
HID_FEATURE_REPORT);
if (ret != report.length + 1) {
hid_err(hdev, "error writing %s string: %d\n", kattr->attr.name,
ret);
if (ret < 0)
return ret;
return -EIO;
}
chmod_sysfs_attrs(hdev);
return count;
}
static ssize_t pstr_show(struct device *kdev,
struct device_attribute *kattr, char *buf)
{
struct hid_device *hdev = container_of(kdev, struct hid_device, dev);
struct cp2112_pstring_attribute *attr =
container_of(kattr, struct cp2112_pstring_attribute, attr);
struct cp2112_string_report report;
u8 length;
int ret;
ret = cp2112_hid_get(hdev, attr->report, &report.report,
sizeof(report) - 1, HID_FEATURE_REPORT);
if (ret < 3) {
hid_err(hdev, "error reading %s string: %d\n", kattr->attr.name,
ret);
if (ret < 0)
return ret;
return -EIO;
}
if (report.length < 2) {
hid_err(hdev, "invalid %s string length: %d\n",
kattr->attr.name, report.length);
return -EIO;
}
length = report.length > ret - 1 ? ret - 1 : report.length;
length = (length - 2) / sizeof(report.string[0]);
ret = utf16s_to_utf8s(report.string, length, UTF16_LITTLE_ENDIAN, buf,
PAGE_SIZE - 1);
buf[ret++] = '\n';
return ret;
}
#define CP2112_PSTR_ATTR(name, _report) \
static struct cp2112_pstring_attribute dev_attr_##name = { \
.attr = __ATTR(name, (S_IWUSR | S_IRUGO), pstr_show, pstr_store), \
.report = _report, \
};
CP2112_PSTR_ATTR(manufacturer, CP2112_MANUFACTURER_STRING);
CP2112_PSTR_ATTR(product, CP2112_PRODUCT_STRING);
CP2112_PSTR_ATTR(serial, CP2112_SERIAL_STRING);
#undef CP2112_PSTR_ATTR
static const struct attribute_group cp2112_attr_group = {
.attrs = (struct attribute *[]){
&dev_attr_vendor_id.attr,
&dev_attr_product_id.attr,
&dev_attr_max_power.attr,
&dev_attr_power_mode.attr,
&dev_attr_release_version.attr,
&dev_attr_manufacturer.attr.attr,
&dev_attr_product.attr.attr,
&dev_attr_serial.attr.attr,
NULL
}
};
/* Chmoding our sysfs attributes is simply a way to expose which fields in the
* PROM have already been programmed. We do not depend on this preventing
* writing to these attributes since the CP2112 will simply ignore writes to
* already-programmed fields. This is why there is no sense in fixing this
* racy behaviour.
*/
static void chmod_sysfs_attrs(struct hid_device *hdev)
{
struct attribute **attr;
u8 buf[2];
int ret;
ret = cp2112_hid_get(hdev, CP2112_LOCK_BYTE, buf, sizeof(buf),
HID_FEATURE_REPORT);
if (ret != sizeof(buf)) {
hid_err(hdev, "error reading lock byte: %d\n", ret);
return;
}
for (attr = cp2112_attr_group.attrs; *attr; ++attr) {
umode_t mode = (buf[1] & 1) ? S_IWUSR | S_IRUGO : S_IRUGO;
ret = sysfs_chmod_file(&hdev->dev.kobj, *attr, mode);
if (ret < 0)
hid_err(hdev, "error chmoding sysfs file %s\n",
(*attr)->name);
buf[1] >>= 1;
}
}
static int cp2112_probe(struct hid_device *hdev, const struct hid_device_id *id)
{
struct cp2112_device *dev;
u8 buf[3];
struct cp2112_smbus_config_report config;
int ret;
ret = hid_parse(hdev);
if (ret) {
hid_err(hdev, "parse failed\n");
return ret;
}
ret = hid_hw_start(hdev, HID_CONNECT_HIDRAW);
if (ret) {
hid_err(hdev, "hw start failed\n");
return ret;
}
ret = hid_hw_open(hdev);
if (ret) {
hid_err(hdev, "hw open failed\n");
goto err_hid_stop;
}
ret = hid_hw_power(hdev, PM_HINT_FULLON);
if (ret < 0) {
hid_err(hdev, "power management error: %d\n", ret);
goto err_hid_close;
}
ret = cp2112_hid_get(hdev, CP2112_GET_VERSION_INFO, buf, sizeof(buf),
HID_FEATURE_REPORT);
if (ret != sizeof(buf)) {
hid_err(hdev, "error requesting version\n");
if (ret >= 0)
ret = -EIO;
goto err_power_normal;
}
hid_info(hdev, "Part Number: 0x%02X Device Version: 0x%02X\n",
buf[1], buf[2]);
ret = cp2112_hid_get(hdev, CP2112_SMBUS_CONFIG, (u8 *)&config,
sizeof(config), HID_FEATURE_REPORT);
if (ret != sizeof(config)) {
hid_err(hdev, "error requesting SMBus config\n");
if (ret >= 0)
ret = -EIO;
goto err_power_normal;
}
config.retry_time = cpu_to_be16(1);
ret = cp2112_hid_output(hdev, (u8 *)&config, sizeof(config),
HID_FEATURE_REPORT);
if (ret != sizeof(config)) {
hid_err(hdev, "error setting SMBus config\n");
if (ret >= 0)
ret = -EIO;
goto err_power_normal;
}
dev = kzalloc(sizeof(*dev), GFP_KERNEL);
if (!dev) {
ret = -ENOMEM;
goto err_power_normal;
}
hid_set_drvdata(hdev, (void *)dev);
dev->hdev = hdev;
dev->adap.owner = THIS_MODULE;
dev->adap.class = I2C_CLASS_HWMON;
dev->adap.algo = &smbus_algorithm;
dev->adap.algo_data = dev;
dev->adap.dev.parent = &hdev->dev;
snprintf(dev->adap.name, sizeof(dev->adap.name),
"CP2112 SMBus Bridge on hiddev%d", hdev->minor);
init_waitqueue_head(&dev->wait);
hid_device_io_start(hdev);
ret = i2c_add_adapter(&dev->adap);
hid_device_io_stop(hdev);
if (ret) {
hid_err(hdev, "error registering i2c adapter\n");
goto err_free_dev;
}
hid_dbg(hdev, "adapter registered\n");
dev->gc.label = "cp2112_gpio";
dev->gc.direction_input = cp2112_gpio_direction_input;
dev->gc.direction_output = cp2112_gpio_direction_output;
dev->gc.set = cp2112_gpio_set;
dev->gc.get = cp2112_gpio_get;
dev->gc.base = -1;
dev->gc.ngpio = 8;
dev->gc.can_sleep = 1;
dev->gc.dev = &hdev->dev;
ret = gpiochip_add(&dev->gc);
if (ret < 0) {
hid_err(hdev, "error registering gpio chip\n");
goto err_free_i2c;
}
ret = sysfs_create_group(&hdev->dev.kobj, &cp2112_attr_group);
if (ret < 0) {
hid_err(hdev, "error creating sysfs attrs\n");
goto err_gpiochip_remove;
}
chmod_sysfs_attrs(hdev);
hid_hw_power(hdev, PM_HINT_NORMAL);
return ret;
err_gpiochip_remove:
if (gpiochip_remove(&dev->gc) < 0)
hid_err(hdev, "error removing gpio chip\n");
err_free_i2c:
i2c_del_adapter(&dev->adap);
err_free_dev:
kfree(dev);
err_power_normal:
hid_hw_power(hdev, PM_HINT_NORMAL);
err_hid_close:
hid_hw_close(hdev);
err_hid_stop:
hid_hw_stop(hdev);
return ret;
}
static void cp2112_remove(struct hid_device *hdev)
{
struct cp2112_device *dev = hid_get_drvdata(hdev);
sysfs_remove_group(&hdev->dev.kobj, &cp2112_attr_group);
if (gpiochip_remove(&dev->gc))
hid_err(hdev, "unable to remove gpio chip\n");
i2c_del_adapter(&dev->adap);
/* i2c_del_adapter has finished removing all i2c devices from our
* adapter. Well behaved devices should no longer call our cp2112_xfer
* and should have waited for any pending calls to finish. It has also
* waited for device_unregister(&adap->dev) to complete. Therefore we
* can safely free our struct cp2112_device.
*/
hid_hw_close(hdev);
hid_hw_stop(hdev);
kfree(dev);
}
static int cp2112_raw_event(struct hid_device *hdev, struct hid_report *report,
u8 *data, int size)
{
struct cp2112_device *dev = hid_get_drvdata(hdev);
struct cp2112_xfer_status_report *xfer = (void *)data;
switch (data[0]) {
case CP2112_TRANSFER_STATUS_RESPONSE:
hid_dbg(hdev, "xfer status: %02x %02x %04x %04x\n",
xfer->status0, xfer->status1,
be16_to_cpu(xfer->retries), be16_to_cpu(xfer->length));
switch (xfer->status0) {
case STATUS0_IDLE:
dev->xfer_status = -EAGAIN;
break;
case STATUS0_BUSY:
dev->xfer_status = -EBUSY;
break;
case STATUS0_COMPLETE:
dev->xfer_status = be16_to_cpu(xfer->length);
break;
case STATUS0_ERROR:
switch (xfer->status1) {
case STATUS1_TIMEOUT_NACK:
case STATUS1_TIMEOUT_BUS:
dev->xfer_status = -ETIMEDOUT;
break;
default:
dev->xfer_status = -EIO;
break;
}
break;
default:
dev->xfer_status = -EINVAL;
break;
}
atomic_set(&dev->xfer_avail, 1);
break;
case CP2112_DATA_READ_RESPONSE:
hid_dbg(hdev, "read response: %02x %02x\n", data[1], data[2]);
dev->read_length = data[2];
if (dev->read_length > sizeof(dev->read_data))
dev->read_length = sizeof(dev->read_data);
memcpy(dev->read_data, &data[3], dev->read_length);
atomic_set(&dev->read_avail, 1);
break;
default:
hid_err(hdev, "unknown report\n");
return 0;
}
wake_up_interruptible(&dev->wait);
return 1;
}
static struct hid_driver cp2112_driver = {
.name = "cp2112",
.id_table = cp2112_devices,
.probe = cp2112_probe,
.remove = cp2112_remove,
.raw_event = cp2112_raw_event,
};
module_hid_driver(cp2112_driver);
MODULE_DESCRIPTION("Silicon Labs HID USB to SMBus master bridge");
MODULE_AUTHOR("David Barksdale <dbarksdale@uplogix.com>");
MODULE_LICENSE("GPL");
drivers/hid/hid-hyperv.c
View file @ b95dd3ca
......@@ -455,12 +455,22 @@ static void mousevsc_hid_stop(struct hid_device *hid)
{
}
static int mousevsc_hid_raw_request(struct hid_device *hid,
unsigned char report_num,
__u8 *buf, size_t len,
unsigned char rtype,
int reqtype)
{
return 0;
}
static struct hid_ll_driver mousevsc_ll_driver = {
.parse = mousevsc_hid_parse,
.open = mousevsc_hid_open,
.close = mousevsc_hid_close,
.start = mousevsc_hid_start,
.stop = mousevsc_hid_stop,
.raw_request = mousevsc_hid_raw_request,
};
static struct hid_driver mousevsc_hid_driver;
......
drivers/hid/hid-ids.h
View file @ b95dd3ca
......@@ -240,6 +240,7 @@
#define USB_VENDOR_ID_CYGNAL 0x10c4
#define USB_DEVICE_ID_CYGNAL_RADIO_SI470X 0x818a
#define USB_DEVICE_ID_CYGNAL_CP2112 0xea90
#define USB_VENDOR_ID_CYPRESS 0x04b4
#define USB_DEVICE_ID_CYPRESS_MOUSE 0x0001
......
drivers/hid/hid-input.c
View file @ b95dd3ca
......@@ -1150,7 +1150,7 @@ static void hidinput_led_worker(struct work_struct *work)
led_work);
struct hid_field *field;
struct hid_report *report;
int len;
int len, ret;
__u8 *buf;
field = hidinput_get_led_field(hid);
......@@ -1184,7 +1184,10 @@ static void hidinput_led_worker(struct work_struct *work)
hid_output_report(report, buf);
/* synchronous output report */
hid_output_raw_report(hid, buf, len, HID_OUTPUT_REPORT);
ret = hid_hw_output_report(hid, buf, len);
if (ret == -ENOSYS)
hid_hw_raw_request(hid, report->id, buf, len, HID_OUTPUT_REPORT,
HID_REQ_SET_REPORT);
kfree(buf);
}
......@@ -1263,8 +1266,7 @@ static struct hid_input *hidinput_allocate(struct hid_device *hid)
}
input_set_drvdata(input_dev, hid);
if (hid->ll_driver->request || hid->hid_output_raw_report)
input_dev->event = hidinput_input_event;
input_dev->event = hidinput_input_event;
input_dev->open = hidinput_open;
input_dev->close = hidinput_close;
input_dev->setkeycode = hidinput_setkeycode;
......
drivers/hid/hid-lg.c
View file @ b95dd3ca
......@@ -692,8 +692,8 @@ static int lg_probe(struct hid_device *hdev, const struct hid_device_id *id)
if (hdev->product == USB_DEVICE_ID_LOGITECH_WII_WHEEL) {
unsigned char buf[] = { 0x00, 0xAF, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
ret = hid_output_raw_report(hdev, buf, sizeof(buf),
HID_FEATURE_REPORT);
ret = hid_hw_raw_request(hdev, buf[0], buf, sizeof(buf),
HID_FEATURE_REPORT, HID_REQ_SET_REPORT);
if (ret >= 0) {
/* insert a little delay of 10 jiffies ~ 40ms */
......@@ -705,8 +705,8 @@ static int lg_probe(struct hid_device *hdev, const struct hid_device_id *id)
buf[1] = 0xB2;
get_random_bytes(&buf[2], 2);
ret = hid_output_raw_report(hdev, buf, sizeof(buf),
HID_FEATURE_REPORT);
ret = hid_hw_raw_request(hdev, buf[0], buf, sizeof(buf),
HID_FEATURE_REPORT, HID_REQ_SET_REPORT);
}
}
......
drivers/hid/hid-logitech-dj.c
View file @ b95dd3ca
......@@ -193,9 +193,6 @@ static const u8 hid_reportid_size_map[NUMBER_OF_HID_REPORTS] = {
static struct hid_ll_driver logi_dj_ll_driver;
static int logi_dj_output_hidraw_report(struct hid_device *hid, u8 * buf,
size_t count,
unsigned char report_type);
static int logi_dj_recv_query_paired_devices(struct dj_receiver_dev *djrcv_dev);
static void logi_dj_recv_destroy_djhid_device(struct dj_receiver_dev *djrcv_dev,
......@@ -262,7 +259,6 @@ static void logi_dj_recv_add_djhid_device(struct dj_receiver_dev *djrcv_dev,
}
dj_hiddev->ll_driver = &logi_dj_ll_driver;
dj_hiddev->hid_output_raw_report = logi_dj_output_hidraw_report;
dj_hiddev->dev.parent = &djrcv_hdev->dev;
dj_hiddev->bus = BUS_USB;
......@@ -544,9 +540,10 @@ static void logi_dj_ll_close(struct hid_device *hid)
dbg_hid("%s:%s\n", __func__, hid->phys);
}
static int logi_dj_output_hidraw_report(struct hid_device *hid, u8 * buf,
size_t count,
unsigned char report_type)
static int logi_dj_ll_raw_request(struct hid_device *hid,
unsigned char reportnum, __u8 *buf,
size_t count, unsigned char report_type,
int reqtype)
{
struct dj_device *djdev = hid->driver_data;
struct dj_receiver_dev *djrcv_dev = djdev->dj_receiver_dev;
......@@ -567,15 +564,8 @@ static int logi_dj_output_hidraw_report(struct hid_device *hid, u8 * buf,
out_buf[1] = djdev->device_index;
memcpy(out_buf + 2, buf, count);
/*
* hid-generic calls us with hid_output_raw_report(), but the LEDs
* are set through a SET_REPORT command. It works for USB-HID devices
* because usbhid either calls a SET_REPORT or directly send the output
* report depending if the device presents an urbout.
* Let be simple, send a SET_REPORT request.
*/
ret = hid_hw_raw_request(djrcv_dev->hdev, out_buf[0], out_buf,
DJREPORT_SHORT_LENGTH, report_type, HID_REQ_SET_REPORT);
DJREPORT_SHORT_LENGTH, report_type, reqtype);
kfree(out_buf);
return ret;
......@@ -662,6 +652,7 @@ static struct hid_ll_driver logi_dj_ll_driver = {
.stop = logi_dj_ll_stop,
.open = logi_dj_ll_open,
.close = logi_dj_ll_close,
.raw_request = logi_dj_ll_raw_request,
};
......
drivers/hid/hid-magicmouse.c
View file @ b95dd3ca
......@@ -538,8 +538,8 @@ static int magicmouse_probe(struct hid_device *hdev,
* but there seems to be no other way of switching the mode.
* Thus the super-ugly hacky success check below.
*/
ret = hid_output_raw_report(hdev, feature, sizeof(feature),
HID_FEATURE_REPORT);
ret = hid_hw_raw_request(hdev, feature[0], feature, sizeof(feature),
HID_FEATURE_REPORT, HID_REQ_SET_REPORT);
if (ret != -EIO && ret != sizeof(feature)) {
hid_err(hdev, "unable to request touch data (%d)\n", ret);
goto err_stop_hw;
......
drivers/hid/hid-sony.c
View file @ b95dd3ca
......@@ -29,7 +29,6 @@
#include <linux/hid.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/usb.h>
#include <linux/leds.h>
#include <linux/power_supply.h>
#include <linux/spinlock.h>
......@@ -1006,45 +1005,6 @@ static int sony_mapping(struct hid_device *hdev, struct hid_input *hi,
return 0;
}
/*
* The Sony Sixaxis does not handle HID Output Reports on the Interrupt EP
* like it should according to usbhid/hid-core.c::usbhid_output_raw_report()
* so we need to override that forcing HID Output Reports on the Control EP.
*
* There is also another issue about HID Output Reports via USB, the Sixaxis
* does not want the report_id as part of the data packet, so we have to
* discard buf[0] when sending the actual control message, even for numbered
* reports, humpf!
*/
static int sixaxis_usb_output_raw_report(struct hid_device *hid, __u8 *buf,
size_t count, unsigned char report_type)
{
struct usb_interface *intf = to_usb_interface(hid->dev.parent);
struct usb_device *dev = interface_to_usbdev(intf);
struct usb_host_interface *interface = intf->cur_altsetting;
int report_id = buf[0];
int ret;
if (report_type == HID_OUTPUT_REPORT) {
/* Don't send the Report ID */
buf++;
count--;
}
ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
HID_REQ_SET_REPORT,
USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
((report_type + 1) << 8) | report_id,
interface->desc.bInterfaceNumber, buf, count,
USB_CTRL_SET_TIMEOUT);
/* Count also the Report ID, in case of an Output report. */
if (ret > 0 && report_type == HID_OUTPUT_REPORT)
ret++;
return ret;
}
/*
* Sending HID_REQ_GET_REPORT changes the operation mode of the ps3 controller
* to "operational". Without this, the ps3 controller will not report any
......@@ -1072,8 +1032,8 @@ static int sixaxis_set_operational_usb(struct hid_device *hdev)
static int sixaxis_set_operational_bt(struct hid_device *hdev)
{
unsigned char buf[] = { 0xf4, 0x42, 0x03, 0x00, 0x00 };
return hid_output_raw_report(hdev, buf, sizeof(buf),
HID_FEATURE_REPORT);
return hid_hw_raw_request(hdev, buf[0], buf, sizeof(buf),
HID_FEATURE_REPORT, HID_REQ_SET_REPORT);
}
/*
......@@ -1305,11 +1265,8 @@ static void sixaxis_state_worker(struct work_struct *work)
buf[10] |= sc->led_state[2] << 3;
buf[10] |= sc->led_state[3] << 4;
if (sc->quirks & SIXAXIS_CONTROLLER_USB)
hid_output_raw_report(sc->hdev, buf, sizeof(buf), HID_OUTPUT_REPORT);
else
hid_hw_raw_request(sc->hdev, 0x01, buf, sizeof(buf),
HID_OUTPUT_REPORT, HID_REQ_SET_REPORT);
hid_hw_raw_request(sc->hdev, 0x01, buf, sizeof(buf), HID_OUTPUT_REPORT,
HID_REQ_SET_REPORT);
}
static void dualshock4_state_worker(struct work_struct *work)
......@@ -1659,7 +1616,18 @@ static int sony_probe(struct hid_device *hdev, const struct hid_device_id *id)
}
if (sc->quirks & SIXAXIS_CONTROLLER_USB) {
hdev->hid_output_raw_report = sixaxis_usb_output_raw_report;
/*
* The Sony Sixaxis does not handle HID Output Reports on the
* Interrupt EP like it could, so we need to force HID Output
* Reports to use HID_REQ_SET_REPORT on the Control EP.
*
* There is also another issue about HID Output Reports via USB,
* the Sixaxis does not want the report_id as part of the data
* packet, so we have to discard buf[0] when sending the actual
* control message, even for numbered reports, humpf!
*/
hdev->quirks |= HID_QUIRK_NO_OUTPUT_REPORTS_ON_INTR_EP;
hdev->quirks |= HID_QUIRK_SKIP_OUTPUT_REPORT_ID;
ret = sixaxis_set_operational_usb(hdev);
sc->worker_initialized = 1;
INIT_WORK(&sc->state_worker, sixaxis_state_worker);
......
drivers/hid/hid-thingm.c
View file @ b95dd3ca
......@@ -48,8 +48,8 @@ static int blink1_send_command(struct blink1_data *data,
buf[0], buf[1], buf[2], buf[3], buf[4],
buf[5], buf[6], buf[7], buf[8]);
ret = hid_output_raw_report(data->hdev, buf, BLINK1_CMD_SIZE,
HID_FEATURE_REPORT);
ret = hid_hw_raw_request(data->hdev, buf[0], buf, BLINK1_CMD_SIZE,
HID_FEATURE_REPORT, HID_REQ_SET_REPORT);
return ret < 0 ? ret : 0;
}
......
drivers/hid/hid-wacom.c
View file @ b95dd3ca
......@@ -128,7 +128,8 @@ static void wacom_set_image(struct hid_device *hdev, const char *image,
rep_data[0] = WAC_CMD_ICON_START_STOP;
rep_data[1] = 0;
ret = hid_output_raw_report(hdev, rep_data, 2, HID_FEATURE_REPORT);
ret = hid_hw_raw_request(hdev, rep_data[0], rep_data, 2,
HID_FEATURE_REPORT, HID_REQ_SET_REPORT);
if (ret < 0)
goto err;
......@@ -142,14 +143,15 @@ static void wacom_set_image(struct hid_device *hdev, const char *image,
rep_data[j + 3] = p[(i << 6) + j];
rep_data[2] = i;
ret = hid_output_raw_report(hdev, rep_data, 67,
HID_FEATURE_REPORT);
ret = hid_hw_raw_request(hdev, rep_data[0], rep_data, 67,
HID_FEATURE_REPORT, HID_REQ_SET_REPORT);
}
rep_data[0] = WAC_CMD_ICON_START_STOP;
rep_data[1] = 0;
ret = hid_output_raw_report(hdev, rep_data, 2, HID_FEATURE_REPORT);
ret = hid_hw_raw_request(hdev, rep_data[0], rep_data, 2,
HID_FEATURE_REPORT, HID_REQ_SET_REPORT);
err:
return;
......@@ -181,7 +183,8 @@ static void wacom_leds_set_brightness(struct led_classdev *led_dev,
buf[3] = value;
/* use fixed brightness for OLEDs */
buf[4] = 0x08;
hid_output_raw_report(hdev, buf, 9, HID_FEATURE_REPORT);
hid_hw_raw_request(hdev, buf[0], buf, 9, HID_FEATURE_REPORT,
HID_REQ_SET_REPORT);
kfree(buf);
}
......@@ -337,8 +340,8 @@ static void wacom_set_features(struct hid_device *hdev, u8 speed)
rep_data[0] = 0x03 ; rep_data[1] = 0x00;
limit = 3;
do {
ret = hid_output_raw_report(hdev, rep_data, 2,
HID_FEATURE_REPORT);
ret = hid_hw_raw_request(hdev, rep_data[0], rep_data, 2,
HID_FEATURE_REPORT, HID_REQ_SET_REPORT);
} while (ret < 0 && limit-- > 0);
if (ret >= 0) {
......@@ -350,8 +353,9 @@ static void wacom_set_features(struct hid_device *hdev, u8 speed)
rep_data[1] = 0x00;
limit = 3;
do {
ret = hid_output_raw_report(hdev,
rep_data, 2, HID_FEATURE_REPORT);
ret = hid_hw_raw_request(hdev, rep_data[0],
rep_data, 2, HID_FEATURE_REPORT,
HID_REQ_SET_REPORT);
} while (ret < 0 && limit-- > 0);
if (ret >= 0) {
......@@ -376,8 +380,8 @@ static void wacom_set_features(struct hid_device *hdev, u8 speed)
rep_data[0] = 0x03;
rep_data[1] = wdata->features;
ret = hid_output_raw_report(hdev, rep_data, 2,
HID_FEATURE_REPORT);
ret = hid_hw_raw_request(hdev, rep_data[0], rep_data, 2,
HID_FEATURE_REPORT, HID_REQ_SET_REPORT);
if (ret >= 0)
wdata->high_speed = speed;
break;
......
drivers/hid/hid-wiimote-core.c
View file @ b95dd3ca
......@@ -28,14 +28,14 @@ static int wiimote_hid_send(struct hid_device *hdev, __u8 *buffer,
__u8 *buf;
int ret;
if (!hdev->hid_output_raw_report)
if (!hdev->ll_driver->output_report)
return -ENODEV;
buf = kmemdup(buffer, count, GFP_KERNEL);
if (!buf)
return -ENOMEM;
ret = hid_output_raw_report(hdev, buf, count, HID_OUTPUT_REPORT);
ret = hid_hw_output_report(hdev, buf, count);
kfree(buf);
return ret;
......
drivers/hid/hidraw.c
View file @ b95dd3ca
......@@ -123,10 +123,6 @@ static ssize_t hidraw_send_report(struct file *file, const char __user *buffer,
dev = hidraw_table[minor]->hid;
if (!dev->hid_output_raw_report) {
ret = -ENODEV;
goto out;
}
if (count > HID_MAX_BUFFER_SIZE) {
hid_warn(dev, "pid %d passed too large report\n",
......@@ -153,7 +149,21 @@ static ssize_t hidraw_send_report(struct file *file, const char __user *buffer,
goto out_free;
}
ret = hid_output_raw_report(dev, buf, count, report_type);
if ((report_type == HID_OUTPUT_REPORT) &&
!(dev->quirks & HID_QUIRK_NO_OUTPUT_REPORTS_ON_INTR_EP)) {
ret = hid_hw_output_report(dev, buf, count);
/*
* compatibility with old implementation of USB-HID and I2C-HID:
* if the device does not support receiving output reports,
* on an interrupt endpoint, fallback to SET_REPORT HID command.
*/
if (ret != -ENOSYS)
goto out_free;
}
ret = hid_hw_raw_request(dev, buf[0], buf, count, report_type,
HID_REQ_SET_REPORT);
out_free:
kfree(buf);
out:
......
drivers/hid/i2c-hid/i2c-hid.c
View file @ b95dd3ca
......@@ -256,18 +256,27 @@ static int i2c_hid_get_report(struct i2c_client *client, u8 reportType,
return 0;
}
static int i2c_hid_set_report(struct i2c_client *client, u8 reportType,
u8 reportID, unsigned char *buf, size_t data_len)
/**
* i2c_hid_set_or_send_report: forward an incoming report to the device
* @client: the i2c_client of the device
* @reportType: 0x03 for HID_FEATURE_REPORT ; 0x02 for HID_OUTPUT_REPORT
* @reportID: the report ID
* @buf: the actual data to transfer, without the report ID
* @len: size of buf
* @use_data: true: use SET_REPORT HID command, false: send plain OUTPUT report
*/
static int i2c_hid_set_or_send_report(struct i2c_client *client, u8 reportType,
u8 reportID, unsigned char *buf, size_t data_len, bool use_data)
{
struct i2c_hid *ihid = i2c_get_clientdata(client);
u8 *args = ihid->argsbuf;
const struct i2c_hid_cmd * hidcmd = &hid_set_report_cmd;
const struct i2c_hid_cmd *hidcmd;
int ret;
u16 dataRegister = le16_to_cpu(ihid->hdesc.wDataRegister);
u16 outputRegister = le16_to_cpu(ihid->hdesc.wOutputRegister);
u16 maxOutputLength = le16_to_cpu(ihid->hdesc.wMaxOutputLength);
/* hidraw already checked that data_len < HID_MAX_BUFFER_SIZE */
/* hid_hw_* already checked that data_len < HID_MAX_BUFFER_SIZE */
u16 size = 2 /* size */ +
(reportID ? 1 : 0) /* reportID */ +
data_len /* buf */;
......@@ -278,6 +287,9 @@ static int i2c_hid_set_report(struct i2c_client *client, u8 reportType,
i2c_hid_dbg(ihid, "%s\n", __func__);
if (!use_data && maxOutputLength == 0)
return -ENOSYS;
if (reportID >= 0x0F) {
args[index++] = reportID;
reportID = 0x0F;
......@@ -287,9 +299,10 @@ static int i2c_hid_set_report(struct i2c_client *client, u8 reportType,
* use the data register for feature reports or if the device does not
* support the output register
*/
if (reportType == 0x03 || maxOutputLength == 0) {
if (use_data) {
args[index++] = dataRegister & 0xFF;
args[index++] = dataRegister >> 8;
hidcmd = &hid_set_report_cmd;
} else {
args[index++] = outputRegister & 0xFF;
args[index++] = outputRegister >> 8;
......@@ -550,7 +563,7 @@ static int i2c_hid_get_raw_report(struct hid_device *hid,
}
static int i2c_hid_output_raw_report(struct hid_device *hid, __u8 *buf,
size_t count, unsigned char report_type)
size_t count, unsigned char report_type, bool use_data)
{
struct i2c_client *client = hid->driver_data;
int report_id = buf[0];
......@@ -564,9 +577,9 @@ static int i2c_hid_output_raw_report(struct hid_device *hid, __u8 *buf,
count--;
}
ret = i2c_hid_set_report(client,
ret = i2c_hid_set_or_send_report(client,
report_type == HID_FEATURE_REPORT ? 0x03 : 0x02,
report_id, buf, count);
report_id, buf, count, use_data);
if (report_id && ret >= 0)
ret++; /* add report_id to the number of transfered bytes */
......@@ -574,34 +587,27 @@ static int i2c_hid_output_raw_report(struct hid_device *hid, __u8 *buf,
return ret;
}
static void i2c_hid_request(struct hid_device *hid, struct hid_report *rep,
int reqtype)
static int i2c_hid_output_report(struct hid_device *hid, __u8 *buf,
size_t count)
{
struct i2c_client *client = hid->driver_data;
char *buf;
int ret;
int len = i2c_hid_get_report_length(rep) - 2;
buf = kzalloc(len, GFP_KERNEL);
if (!buf)
return;
return i2c_hid_output_raw_report(hid, buf, count, HID_OUTPUT_REPORT,
false);
}
static int i2c_hid_raw_request(struct hid_device *hid, unsigned char reportnum,
__u8 *buf, size_t len, unsigned char rtype,
int reqtype)
{
switch (reqtype) {
case HID_REQ_GET_REPORT:
ret = i2c_hid_get_raw_report(hid, rep->id, buf, len, rep->type);
if (ret < 0)
dev_err(&client->dev, "%s: unable to get report: %d\n",
__func__, ret);
else
hid_input_report(hid, rep->type, buf, ret, 0);
break;
return i2c_hid_get_raw_report(hid, reportnum, buf, len, rtype);
case HID_REQ_SET_REPORT:
hid_output_report(rep, buf);
i2c_hid_output_raw_report(hid, buf, len, rep->type);
break;
if (buf[0] != reportnum)
return -EINVAL;
return i2c_hid_output_raw_report(hid, buf, len, rtype, true);
default:
return -EIO;
}
kfree(buf);
}
static int i2c_hid_parse(struct hid_device *hid)
......@@ -760,7 +766,8 @@ static struct hid_ll_driver i2c_hid_ll_driver = {
.open = i2c_hid_open,
.close = i2c_hid_close,
.power = i2c_hid_power,
.request = i2c_hid_request,
.output_report = i2c_hid_output_report,
.raw_request = i2c_hid_raw_request,
};
static int i2c_hid_init_irq(struct i2c_client *client)
......@@ -1005,7 +1012,6 @@ static int i2c_hid_probe(struct i2c_client *client,
hid->driver_data = client;
hid->ll_driver = &i2c_hid_ll_driver;
hid->hid_output_raw_report = i2c_hid_output_raw_report;
hid->dev.parent = &client->dev;
ACPI_COMPANION_SET(&hid->dev, ACPI_COMPANION(&client->dev));
hid->bus = BUS_I2C;
......
drivers/hid/uhid.c
View file @ b95dd3ca
......@@ -247,27 +247,22 @@ static int uhid_hid_output_raw(struct hid_device *hid, __u8 *buf, size_t count,
static int uhid_hid_output_report(struct hid_device *hid, __u8 *buf,
size_t count)
{
struct uhid_device *uhid = hid->driver_data;
unsigned long flags;
struct uhid_event *ev;
if (count < 1 || count > UHID_DATA_MAX)
return -EINVAL;
ev = kzalloc(sizeof(*ev), GFP_KERNEL);
if (!ev)
return -ENOMEM;
ev->type = UHID_OUTPUT;
ev->u.output.size = count;
ev->u.output.rtype = UHID_OUTPUT_REPORT;
memcpy(ev->u.output.data, buf, count);
spin_lock_irqsave(&uhid->qlock, flags);
uhid_queue(uhid, ev);
spin_unlock_irqrestore(&uhid->qlock, flags);
return uhid_hid_output_raw(hid, buf, count, HID_OUTPUT_REPORT);
}
return count;
static int uhid_raw_request(struct hid_device *hid, unsigned char reportnum,
__u8 *buf, size_t len, unsigned char rtype,
int reqtype)
{
switch (reqtype) {
case HID_REQ_GET_REPORT:
return uhid_hid_get_raw(hid, reportnum, buf, len, rtype);
case HID_REQ_SET_REPORT:
/* TODO: implement proper SET_REPORT functionality */
return -ENOSYS;
default:
return -EIO;
}
}
static struct hid_ll_driver uhid_hid_driver = {
......@@ -277,6 +272,7 @@ static struct hid_ll_driver uhid_hid_driver = {
.close = uhid_hid_close,
.parse = uhid_hid_parse,
.output_report = uhid_hid_output_report,
.raw_request = uhid_raw_request,
};
#ifdef CONFIG_COMPAT
......@@ -404,7 +400,6 @@ static int uhid_dev_create(struct uhid_device *uhid,
hid->uniq[63] = 0;
hid->ll_driver = &uhid_hid_driver;
hid->hid_output_raw_report = uhid_hid_output_raw;
hid->bus = ev->u.create.bus;
hid->vendor = ev->u.create.vendor;
hid->product = ev->u.create.product;
......
drivers/hid/usbhid/hid-core.c
View file @ b95dd3ca
......@@ -894,7 +894,12 @@ static int usbhid_set_raw_report(struct hid_device *hid, unsigned int reportnum,
int ret, skipped_report_id = 0;
/* Byte 0 is the report number. Report data starts at byte 1.*/
buf[0] = reportnum;
if ((rtype == HID_OUTPUT_REPORT) &&
(hid->quirks & HID_QUIRK_SKIP_OUTPUT_REPORT_ID))
buf[0] = 0;
else
buf[0] = reportnum;
if (buf[0] == 0x0) {
/* Don't send the Report ID */
buf++;
......@@ -922,7 +927,7 @@ static int usbhid_output_report(struct hid_device *hid, __u8 *buf, size_t count)
int actual_length, skipped_report_id = 0, ret;
if (!usbhid->urbout)
return -EIO;
return -ENOSYS;
if (buf[0] == 0x0) {
/* Don't send the Report ID */
......@@ -945,17 +950,6 @@ static int usbhid_output_report(struct hid_device *hid, __u8 *buf, size_t count)
return ret;
}
static int usbhid_output_raw_report(struct hid_device *hid, __u8 *buf,
size_t count, unsigned char report_type)
{
struct usbhid_device *usbhid = hid->driver_data;
if (usbhid->urbout && report_type != HID_FEATURE_REPORT)
return usbhid_output_report(hid, buf, count);
return usbhid_set_raw_report(hid, buf[0], buf, count, report_type);
}
static void usbhid_restart_queues(struct usbhid_device *usbhid)
{
if (usbhid->urbout && !test_bit(HID_OUT_RUNNING, &usbhid->iofl))
......@@ -1289,7 +1283,6 @@ static int usbhid_probe(struct usb_interface *intf, const struct usb_device_id *
usb_set_intfdata(intf, hid);
hid->ll_driver = &usb_hid_driver;
hid->hid_output_raw_report = usbhid_output_raw_report;
hid->ff_init = hid_pidff_init;
#ifdef CONFIG_USB_HIDDEV
hid->hiddev_connect = hiddev_connect;
......
include/linux/hid.h
View file @ b95dd3ca
......@@ -287,6 +287,8 @@ struct hid_item {
#define HID_QUIRK_NO_EMPTY_INPUT 0x00000100
#define HID_QUIRK_NO_INIT_INPUT_REPORTS 0x00000200
#define HID_QUIRK_SKIP_OUTPUT_REPORTS 0x00010000
#define HID_QUIRK_SKIP_OUTPUT_REPORT_ID 0x00020000
#define HID_QUIRK_NO_OUTPUT_REPORTS_ON_INTR_EP 0x00040000
#define HID_QUIRK_FULLSPEED_INTERVAL 0x10000000
#define HID_QUIRK_NO_INIT_REPORTS 0x20000000
#define HID_QUIRK_NO_IGNORE 0x40000000
......@@ -508,9 +510,6 @@ struct hid_device { /* device report descriptor */
struct hid_usage *, __s32);
void (*hiddev_report_event) (struct hid_device *, struct hid_report *);
/* handler for raw output data, used by hidraw */
int (*hid_output_raw_report) (struct hid_device *, __u8 *, size_t, unsigned char);
/* debugging support via debugfs */
unsigned short debug;
struct dentry *debug_dir;
......@@ -753,6 +752,7 @@ struct hid_field *hidinput_get_led_field(struct hid_device *hid);
unsigned int hidinput_count_leds(struct hid_device *hid);
__s32 hidinput_calc_abs_res(const struct hid_field *field, __u16 code);
void hid_output_report(struct hid_report *report, __u8 *data);
void __hid_request(struct hid_device *hid, struct hid_report *rep, int reqtype);
u8 *hid_alloc_report_buf(struct hid_report *report, gfp_t flags);
struct hid_device *hid_allocate_device(void);
struct hid_report *hid_register_report(struct hid_device *device, unsigned type, unsigned id);
......@@ -965,7 +965,9 @@ static inline void hid_hw_request(struct hid_device *hdev,
struct hid_report *report, int reqtype)
{
if (hdev->ll_driver->request)
hdev->ll_driver->request(hdev, report, reqtype);
return hdev->ll_driver->request(hdev, report, reqtype);
__hid_request(hdev, report, reqtype);
}
/**
......@@ -986,11 +988,11 @@ static inline int hid_hw_raw_request(struct hid_device *hdev,
unsigned char reportnum, __u8 *buf,
size_t len, unsigned char rtype, int reqtype)
{
if (hdev->ll_driver->raw_request)
return hdev->ll_driver->raw_request(hdev, reportnum, buf, len,
rtype, reqtype);
if (len < 1 || len > HID_MAX_BUFFER_SIZE || !buf)
return -EINVAL;
return -ENOSYS;
return hdev->ll_driver->raw_request(hdev, reportnum, buf, len,
rtype, reqtype);
}
/**
......@@ -1005,28 +1007,15 @@ static inline int hid_hw_raw_request(struct hid_device *hdev,
static inline int hid_hw_output_report(struct hid_device *hdev, __u8 *buf,
size_t len)
{
if (len < 1 || len > HID_MAX_BUFFER_SIZE || !buf)
return -EINVAL;
if (hdev->ll_driver->output_report)
return hdev->ll_driver->output_report(hdev, buf, len);
return -ENOSYS;
}
/**
* hid_output_raw_report - send an output or a feature report to the device
*
* @hdev: hid device
* @buf: raw data to transfer
* @len: length of buf
* @report_type: HID_FEATURE_REPORT or HID_OUTPUT_REPORT
*
* @return: count of data transfered, negative if error
*/
static inline int hid_output_raw_report(struct hid_device *hdev, __u8 *buf,
size_t len, unsigned char report_type)
{
return hdev->hid_output_raw_report(hdev, buf, len, report_type);
}
/**
* hid_hw_idle - send idle request to device
*
......
net/bluetooth/hidp/core.c
View file @ b95dd3ca
......@@ -382,18 +382,6 @@ static int hidp_output_report(struct hid_device *hid, __u8 *data, size_t count)
data, count);
}
static int hidp_output_raw_report(struct hid_device *hid, unsigned char *data,
size_t count, unsigned char report_type)
{
if (report_type == HID_OUTPUT_REPORT) {
return hidp_output_report(hid, data, count);
} else if (report_type != HID_FEATURE_REPORT) {
return -EINVAL;
}
return hidp_set_raw_report(hid, data[0], data, count, report_type);
}
static int hidp_raw_request(struct hid_device *hid, unsigned char reportnum,
__u8 *buf, size_t len, unsigned char rtype,
int reqtype)
......@@ -776,8 +764,6 @@ static int hidp_setup_hid(struct hidp_session *session,
hid->dev.parent = &session->conn->hcon->dev;
hid->ll_driver = &hidp_hid_driver;
hid->hid_output_raw_report = hidp_output_raw_report;
/* True if device is blacklisted in drivers/hid/hid-core.c */
if (hid_ignore(hid)) {
hid_destroy_device(session->hid);
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7