Commit b9a9786a authored by Arnd Bergmann's avatar Arnd Bergmann

Merge tag 'omap-for-v5.12/fixes-rc6-signed' of...

Merge tag 'omap-for-v5.12/fixes-rc6-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes

Fixes for omaps for v5.12-rc cycle

Fix swapped mmc device order also for omap3 that got changed with the
recent PROBE_PREFER_ASYNCHRONOUS changes. While eventually the aliases
should be board specific, all the mmc device instances are all there in
the SoC, and we do probe them by default so that PM runtime can idle the
devices if left enabled from the bootloader.

Also included are two compiler warning fixes.

* tag 'omap-for-v5.12/fixes-rc6-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP2+: Fix uninitialized sr_inst
  ARM: dts: Fix swapped mmc order for omap3
  ARM: OMAP2+: Fix warning for omap_init_time_of()
  ARM: OMAP4: PM: update ROM return address for OSWR and OFF
  ARM: OMAP4: Fix PMIC voltage domains for bionic
  ARM: dts: Fix moving mmc devices with aliases for omap4 & 5
  ARM: dts: Drop duplicate sha2md5_fck to fix clk_disable race

Link: https://lore.kernel.org/r/pull-1617702755-711306@atomide.comSigned-off-by: default avatarArnd Bergmann <arnd@arndb.de>
parents aa68a778 fc85dc42
......@@ -24,6 +24,9 @@ aliases {
i2c0 = &i2c1;
i2c1 = &i2c2;
i2c2 = &i2c3;
mmc0 = &mmc1;
mmc1 = &mmc2;
mmc2 = &mmc3;
serial0 = &uart1;
serial1 = &uart2;
serial2 = &uart3;
......
......@@ -22,6 +22,11 @@ aliases {
i2c1 = &i2c2;
i2c2 = &i2c3;
i2c3 = &i2c4;
mmc0 = &mmc1;
mmc1 = &mmc2;
mmc2 = &mmc3;
mmc3 = &mmc4;
mmc4 = &mmc5;
serial0 = &uart1;
serial1 = &uart2;
serial2 = &uart3;
......
......@@ -770,14 +770,6 @@ per_abe_nc_fclk: per_abe_nc_fclk@108 {
ti,max-div = <2>;
};
sha2md5_fck: sha2md5_fck@15c8 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&l3_div_ck>;
ti,bit-shift = <1>;
reg = <0x15c8>;
};
usb_phy_cm_clk32k: usb_phy_cm_clk32k@640 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
......
......@@ -25,6 +25,11 @@ aliases {
i2c2 = &i2c3;
i2c3 = &i2c4;
i2c4 = &i2c5;
mmc0 = &mmc1;
mmc1 = &mmc2;
mmc2 = &mmc3;
mmc3 = &mmc4;
mmc4 = &mmc5;
serial0 = &uart1;
serial1 = &uart2;
serial2 = &uart3;
......
......@@ -33,7 +33,7 @@ static void __init __maybe_unused omap_generic_init(void)
}
/* Clocks are needed early, see drivers/clocksource for the rest */
void __init __maybe_unused omap_init_time_of(void)
static void __init __maybe_unused omap_init_time_of(void)
{
omap_clk_init();
timer_probe();
......
......@@ -9,6 +9,7 @@
*/
#include <linux/arm-smccc.h>
#include <linux/cpu_pm.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/io.h>
......@@ -20,6 +21,7 @@
#include "common.h"
#include "omap-secure.h"
#include "soc.h"
static phys_addr_t omap_secure_memblock_base;
......@@ -213,3 +215,40 @@ void __init omap_secure_init(void)
{
omap_optee_init_check();
}
/*
* Dummy dispatcher call after core OSWR and MPU off. Updates the ROM return
* address after MMU has been re-enabled after CPU1 has been woken up again.
* Otherwise the ROM code will attempt to use the earlier physical return
* address that got set with MMU off when waking up CPU1. Only used on secure
* devices.
*/
static int cpu_notifier(struct notifier_block *nb, unsigned long cmd, void *v)
{
switch (cmd) {
case CPU_CLUSTER_PM_EXIT:
omap_secure_dispatcher(OMAP4_PPA_SERVICE_0,
FLAG_START_CRITICAL,
0, 0, 0, 0, 0);
break;
default:
break;
}
return NOTIFY_OK;
}
static struct notifier_block secure_notifier_block = {
.notifier_call = cpu_notifier,
};
static int __init secure_pm_init(void)
{
if (omap_type() == OMAP2_DEVICE_TYPE_GP || !soc_is_omap44xx())
return 0;
cpu_pm_register_notifier(&secure_notifier_block);
return 0;
}
omap_arch_initcall(secure_pm_init);
......@@ -50,6 +50,7 @@
#define OMAP5_DRA7_MON_SET_ACR_INDEX 0x107
/* Secure PPA(Primary Protected Application) APIs */
#define OMAP4_PPA_SERVICE_0 0x21
#define OMAP4_PPA_L2_POR_INDEX 0x23
#define OMAP4_PPA_CPU_ACTRL_SMP_INDEX 0x25
......
......@@ -246,10 +246,10 @@ int __init omap4_cpcap_init(void)
omap_voltage_register_pmic(voltdm, &omap443x_max8952_mpu);
if (of_machine_is_compatible("motorola,droid-bionic")) {
voltdm = voltdm_lookup("mpu");
voltdm = voltdm_lookup("core");
omap_voltage_register_pmic(voltdm, &omap_cpcap_core);
voltdm = voltdm_lookup("mpu");
voltdm = voltdm_lookup("iva");
omap_voltage_register_pmic(voltdm, &omap_cpcap_iva);
} else {
voltdm = voltdm_lookup("core");
......
......@@ -188,7 +188,7 @@ static const char * const dra7_sr_instances[] = {
int __init omap_devinit_smartreflex(void)
{
const char * const *sr_inst;
const char * const *sr_inst = NULL;
int i, nr_sr = 0;
if (soc_is_omap44xx()) {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment