Commit ba63b635 authored by Laurent Pinchart's avatar Laurent Pinchart Committed by Tomi Valkeinen

drm: omapdrm: hdmi: Configure the PLL from the HDMI core version

The OMAP4 and OMAP5 PLLs have different properties that require specific
handling in the HDMI PLL driver. This needs knowledge of the PLL
version, which is currently inferred from the DSS version. AS part of
the effort to remove usage of the DSS version, use the HDMI controller
version instead.
Signed-off-by: default avatarLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: default avatarTomi Valkeinen <tomi.valkeinen@ti.com>
parent d20fa5a0
...@@ -146,21 +146,10 @@ static int hdmi_init_pll_data(struct platform_device *pdev, ...@@ -146,21 +146,10 @@ static int hdmi_init_pll_data(struct platform_device *pdev,
pll->base = hpll->base; pll->base = hpll->base;
pll->clkin = clk; pll->clkin = clk;
switch (omapdss_get_version()) { if (hpll->wp->version == 4)
case OMAPDSS_VER_OMAP4430_ES1:
case OMAPDSS_VER_OMAP4430_ES2:
case OMAPDSS_VER_OMAP4:
pll->hw = &dss_omap4_hdmi_pll_hw; pll->hw = &dss_omap4_hdmi_pll_hw;
break; else
case OMAPDSS_VER_OMAP5:
case OMAPDSS_VER_DRA7xx:
pll->hw = &dss_omap5_hdmi_pll_hw; pll->hw = &dss_omap5_hdmi_pll_hw;
break;
default:
return -ENODEV;
}
pll->ops = &hdmi_pll_ops; pll->ops = &hdmi_pll_ops;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment