Commit ba8c0fae authored by Maxime Ripard's avatar Maxime Ripard

drm/vc4: hdmi: Enable 10/12 bpc output

The BCM2711 supports higher bpc count than just 8, so let's support it in
our driver.
Signed-off-by: default avatarMaxime Ripard <maxime@cerno.tech>
Reviewed-by: default avatarDave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215154243.540115-10-maxime@cerno.tech
parent 24169a2b
......@@ -76,6 +76,17 @@
#define VC5_HDMI_VERTB_VSPO_SHIFT 16
#define VC5_HDMI_VERTB_VSPO_MASK VC4_MASK(29, 16)
#define VC5_HDMI_DEEP_COLOR_CONFIG_1_INIT_PACK_PHASE_SHIFT 8
#define VC5_HDMI_DEEP_COLOR_CONFIG_1_INIT_PACK_PHASE_MASK VC4_MASK(10, 8)
#define VC5_HDMI_DEEP_COLOR_CONFIG_1_COLOR_DEPTH_SHIFT 0
#define VC5_HDMI_DEEP_COLOR_CONFIG_1_COLOR_DEPTH_MASK VC4_MASK(3, 0)
#define VC5_HDMI_GCP_CONFIG_GCP_ENABLE BIT(31)
#define VC5_HDMI_GCP_WORD_1_GCP_SUBPACKET_BYTE_1_SHIFT 8
#define VC5_HDMI_GCP_WORD_1_GCP_SUBPACKET_BYTE_1_MASK VC4_MASK(15, 8)
# define VC4_HD_M_SW_RST BIT(2)
# define VC4_HD_M_ENABLE BIT(0)
......@@ -186,6 +197,8 @@ static void vc4_hdmi_connector_reset(struct drm_connector *connector)
if (!new_state)
return;
new_state->base.max_bpc = 8;
new_state->base.max_requested_bpc = 8;
drm_atomic_helper_connector_tv_reset(connector);
}
......@@ -232,12 +245,20 @@ static int vc4_hdmi_connector_init(struct drm_device *dev,
vc4_hdmi->ddc);
drm_connector_helper_add(connector, &vc4_hdmi_connector_helper_funcs);
/*
* Some of the properties below require access to state, like bpc.
* Allocate some default initial connector state with our reset helper.
*/
if (connector->funcs->reset)
connector->funcs->reset(connector);
/* Create and attach TV margin props to this connector. */
ret = drm_mode_create_tv_margin_properties(dev);
if (ret)
return ret;
drm_connector_attach_tv_margin_properties(connector);
drm_connector_attach_max_bpc_property(connector, 8, 12);
connector->polled = (DRM_CONNECTOR_POLL_CONNECT |
DRM_CONNECTOR_POLL_DISCONNECT);
......@@ -506,6 +527,7 @@ static void vc5_hdmi_csc_setup(struct vc4_hdmi *vc4_hdmi, bool enable)
}
static void vc4_hdmi_set_timings(struct vc4_hdmi *vc4_hdmi,
struct drm_connector_state *state,
struct drm_display_mode *mode)
{
bool hsync_pos = mode->flags & DRM_MODE_FLAG_PHSYNC;
......@@ -549,7 +571,9 @@ static void vc4_hdmi_set_timings(struct vc4_hdmi *vc4_hdmi,
HDMI_WRITE(HDMI_VERTB0, vertb_even);
HDMI_WRITE(HDMI_VERTB1, vertb);
}
static void vc5_hdmi_set_timings(struct vc4_hdmi *vc4_hdmi,
struct drm_connector_state *state,
struct drm_display_mode *mode)
{
bool hsync_pos = mode->flags & DRM_MODE_FLAG_PHSYNC;
......@@ -569,6 +593,9 @@ static void vc5_hdmi_set_timings(struct vc4_hdmi *vc4_hdmi,
mode->crtc_vsync_end -
interlaced,
VC4_HDMI_VERTB_VBP));
unsigned char gcp;
bool gcp_en;
u32 reg;
HDMI_WRITE(HDMI_VEC_INTERFACE_XBAR, 0x354021);
HDMI_WRITE(HDMI_HORZA,
......@@ -594,6 +621,39 @@ static void vc5_hdmi_set_timings(struct vc4_hdmi *vc4_hdmi,
HDMI_WRITE(HDMI_VERTB0, vertb_even);
HDMI_WRITE(HDMI_VERTB1, vertb);
switch (state->max_bpc) {
case 12:
gcp = 6;
gcp_en = true;
break;
case 10:
gcp = 5;
gcp_en = true;
break;
case 8:
default:
gcp = 4;
gcp_en = false;
break;
}
reg = HDMI_READ(HDMI_DEEP_COLOR_CONFIG_1);
reg &= ~(VC5_HDMI_DEEP_COLOR_CONFIG_1_INIT_PACK_PHASE_MASK |
VC5_HDMI_DEEP_COLOR_CONFIG_1_COLOR_DEPTH_MASK);
reg |= VC4_SET_FIELD(2, VC5_HDMI_DEEP_COLOR_CONFIG_1_INIT_PACK_PHASE) |
VC4_SET_FIELD(gcp, VC5_HDMI_DEEP_COLOR_CONFIG_1_COLOR_DEPTH);
HDMI_WRITE(HDMI_DEEP_COLOR_CONFIG_1, reg);
reg = HDMI_READ(HDMI_GCP_WORD_1);
reg &= ~VC5_HDMI_GCP_WORD_1_GCP_SUBPACKET_BYTE_1_MASK;
reg |= VC4_SET_FIELD(gcp, VC5_HDMI_GCP_WORD_1_GCP_SUBPACKET_BYTE_1);
HDMI_WRITE(HDMI_GCP_WORD_1, reg);
reg = HDMI_READ(HDMI_GCP_CONFIG);
reg &= ~VC5_HDMI_GCP_CONFIG_GCP_ENABLE;
reg |= gcp_en ? VC5_HDMI_GCP_CONFIG_GCP_ENABLE : 0;
HDMI_WRITE(HDMI_GCP_CONFIG, reg);
HDMI_WRITE(HDMI_CLOCK_STOP, 0);
}
......@@ -731,7 +791,7 @@ static void vc4_hdmi_encoder_pre_crtc_configure(struct drm_encoder *encoder,
VC4_HDMI_SCHEDULER_CONTROL_IGNORE_VSYNC_PREDICTS);
if (vc4_hdmi->variant->set_timings)
vc4_hdmi->variant->set_timings(vc4_hdmi, mode);
vc4_hdmi->variant->set_timings(vc4_hdmi, conn_state, mode);
}
static void vc4_hdmi_encoder_pre_crtc_enable(struct drm_encoder *encoder,
......@@ -852,6 +912,14 @@ static int vc4_hdmi_encoder_atomic_check(struct drm_encoder *encoder,
pixel_rate = mode->clock * 1000;
}
if (conn_state->max_bpc == 12) {
pixel_rate = pixel_rate * 150;
do_div(pixel_rate, 100);
} else if (conn_state->max_bpc == 10) {
pixel_rate = pixel_rate * 125;
do_div(pixel_rate, 100);
}
if (mode->flags & DRM_MODE_FLAG_DBLCLK)
pixel_rate = pixel_rate * 2;
......
......@@ -77,6 +77,7 @@ struct vc4_hdmi_variant {
/* Callback to configure the video timings in the HDMI block */
void (*set_timings)(struct vc4_hdmi *vc4_hdmi,
struct drm_connector_state *state,
struct drm_display_mode *mode);
/* Callback to initialize the PHY according to the connector state */
......
......@@ -59,9 +59,12 @@ enum vc4_hdmi_field {
*/
HDMI_CTS_0,
HDMI_CTS_1,
HDMI_DEEP_COLOR_CONFIG_1,
HDMI_DVP_CTL,
HDMI_FIFO_CTL,
HDMI_FRAME_COUNT,
HDMI_GCP_CONFIG,
HDMI_GCP_WORD_1,
HDMI_HORZA,
HDMI_HORZB,
HDMI_HOTPLUG,
......@@ -229,6 +232,9 @@ static const struct vc4_hdmi_register __maybe_unused vc5_hdmi_hdmi0_fields[] = {
VC4_HDMI_REG(HDMI_VERTB1, 0x0f8),
VC4_HDMI_REG(HDMI_MAI_CHANNEL_MAP, 0x09c),
VC4_HDMI_REG(HDMI_MAI_CONFIG, 0x0a0),
VC4_HDMI_REG(HDMI_DEEP_COLOR_CONFIG_1, 0x170),
VC4_HDMI_REG(HDMI_GCP_CONFIG, 0x178),
VC4_HDMI_REG(HDMI_GCP_WORD_1, 0x17c),
VC4_HDMI_REG(HDMI_HOTPLUG, 0x1a8),
VC5_DVP_REG(HDMI_CLOCK_STOP, 0x0bc),
......@@ -305,6 +311,9 @@ static const struct vc4_hdmi_register __maybe_unused vc5_hdmi_hdmi1_fields[] = {
VC4_HDMI_REG(HDMI_VERTB1, 0x0f8),
VC4_HDMI_REG(HDMI_MAI_CHANNEL_MAP, 0x09c),
VC4_HDMI_REG(HDMI_MAI_CONFIG, 0x0a0),
VC4_HDMI_REG(HDMI_DEEP_COLOR_CONFIG_1, 0x170),
VC4_HDMI_REG(HDMI_GCP_CONFIG, 0x178),
VC4_HDMI_REG(HDMI_GCP_WORD_1, 0x17c),
VC4_HDMI_REG(HDMI_HOTPLUG, 0x1a8),
VC5_DVP_REG(HDMI_CLOCK_STOP, 0x0bc),
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment