Merge remote-tracking branches 'asoc/topic/hdac_hdmi', 'asoc/topic/hisilicon',...

Merge remote-tracking branches 'asoc/topic/hdac_hdmi', 'asoc/topic/hisilicon', 'asoc/topic/iio' and 'asoc/topic/max98373' into asoc-next

Documentation/ABI/testing/sysfs-bus-iio-dfsdm-adc-stm32

+What:		/sys/bus/iio/devices/iio:deviceX/in_voltage_spi_clk_freq
+KernelVersion:	4.14
+Contact:	arnaud.pouliquen@st.com
+Description:
+		For audio purpose only.
+		Used by audio driver to set/get the spi input frequency.
+		This is mandatory if DFSDM is slave on SPI bus, to
+		provide information on the SPI clock frequency during runtime
+		Notice that the SPI frequency should be a multiple of sample
+		frequency to ensure the precision.
+		if DFSDM input is SPI master
+			Reading  SPI clkout frequency,
+			error on writing
+		If DFSDM input is SPI Slave:
+			Reading returns value previously set.
+			Writing value before starting conversions.
\ No newline at end of file

Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.txt

+Device-Tree bindings for sigma delta modulator
+
+Required properties:
+- compatible: should be "ads1201", "sd-modulator". "sd-modulator" can be use
+	as a generic SD modulator if modulator not specified in compatible list.
+- #io-channel-cells = <1>: See the IIO bindings section "IIO consumers".
+
+Example node:
+
+	ads1202: adc@0 {
+		compatible = "sd-modulator";
+		#io-channel-cells = <1>;
+	};

Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.txt

+STMicroelectronics STM32 DFSDM ADC device driver
+
+
+STM32 DFSDM ADC is a sigma delta analog-to-digital converter dedicated to
+interface external sigma delta modulators to STM32 micro controllers.
+It is mainly targeted for:
+- Sigma delta modulators (motor control, metering...)
+- PDM microphones (audio digital microphone)
+
+It features up to 8 serial digital interfaces (SPI or Manchester) and
+up to 4 filters on stm32h7.
+
+Each child node match with a filter instance.
+
+Contents of a STM32 DFSDM root node:
+------------------------------------
+Required properties:
+- compatible: Should be "st,stm32h7-dfsdm".
+- reg: Offset and length of the DFSDM block register set.
+- clocks: IP and serial interfaces clocking. Should be set according
+		to rcc clock ID and "clock-names".
+- clock-names: Input clock name "dfsdm" must be defined,
+		"audio" is optional. If defined CLKOUT is based on the audio
+		clock, else "dfsdm" is used.
+- #interrupt-cells = <1>;
+- #address-cells = <1>;
+- #size-cells = <0>;
+
+Optional properties:
+- spi-max-frequency: Requested only for SPI master mode.
+		  SPI clock OUT frequency (Hz). This clock must be set according
+		  to "clock" property. Frequency must be a multiple of the rcc
+		  clock frequency. If not, SPI CLKOUT frequency will not be
+		  accurate.
+
+Contents of a STM32 DFSDM child nodes:
+--------------------------------------
+
+Required properties:
+- compatible: Must be:
+	"st,stm32-dfsdm-adc" for sigma delta ADCs
+	"st,stm32-dfsdm-dmic" for audio digital microphone.
+- reg: Specifies the DFSDM filter instance used.
+- interrupts: IRQ lines connected to each DFSDM filter instance.
+- st,adc-channels:	List of single-ended channels muxed for this ADC.
+			valid values:
+				"st,stm32h7-dfsdm" compatibility: 0 to 7.
+- st,adc-channel-names:	List of single-ended channel names.
+- st,filter-order:  SinC filter order from 0 to 5.
+			0: FastSinC
+			[1-5]: order 1 to 5.
+			For audio purpose it is recommended to use order 3 to 5.
+- #io-channel-cells = <1>: See the IIO bindings section "IIO consumers".
+
+Required properties for "st,stm32-dfsdm-adc" compatibility:
+- io-channels: From common IIO binding. Used to pipe external sigma delta
+		modulator or internal ADC output to DFSDM channel.
+		This is not required for "st,stm32-dfsdm-pdm" compatibility as
+		PDM microphone is binded in Audio DT node.
+
+Required properties for "st,stm32-dfsdm-pdm" compatibility:
+- #sound-dai-cells: Must be set to 0.
+- dma: DMA controller phandle and DMA request line associated to the
+		filter instance (specified by the field "reg")
+- dma-names: Must be "rx"
+
+Optional properties:
+- st,adc-channel-types:	Single-ended channel input type.
+			- "SPI_R": SPI with data on rising edge (default)
+			- "SPI_F": SPI with data on falling edge
+			- "MANCH_R": manchester codec, rising edge = logic 0
+			- "MANCH_F": manchester codec, falling edge = logic 1
+- st,adc-channel-clk-src: Conversion clock source.
+			  - "CLKIN": external SPI clock (CLKIN x)
+			  - "CLKOUT": internal SPI clock (CLKOUT) (default)
+			  - "CLKOUT_F": internal SPI clock divided by 2 (falling edge).
+			  - "CLKOUT_R": internal SPI clock divided by 2 (rising edge).
+
+- st,adc-alt-channel: Must be defined if two sigma delta modulator are
+			  connected on same SPI input.
+			  If not set, channel n is connected to SPI input n.
+			  If set, channel n is connected to SPI input n + 1.
+
+- st,filter0-sync: Set to 1 to synchronize with DFSDM filter instance 0.
+		   Used for multi microphones synchronization.
+
+Example of a sigma delta adc connected on DFSDM SPI port 0
+and a pdm microphone connected on DFSDM SPI port 1:
+
+	ads1202: simple_sd_adc@0 {
+		compatible = "ads1202";
+		#io-channel-cells = <1>;
+	};
+
+	dfsdm: dfsdm@40017000 {
+		compatible = "st,stm32h7-dfsdm";
+		reg = <0x40017000 0x400>;
+		clocks = <&rcc DFSDM1_CK>;
+		clock-names = "dfsdm";
+		#interrupt-cells = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		dfsdm_adc0: filter@0 {
+			compatible = "st,stm32-dfsdm-adc";
+			#io-channel-cells = <1>;
+			reg = <0>;
+			interrupts = <110>;
+			st,adc-channels = <0>;
+			st,adc-channel-names = "sd_adc0";
+			st,adc-channel-types = "SPI_F";
+			st,adc-channel-clk-src = "CLKOUT";
+			io-channels = <&ads1202 0>;
+			st,filter-order = <3>;
+		};
+		dfsdm_pdm1: filter@1 {
+			compatible = "st,stm32-dfsdm-dmic";
+			reg = <1>;
+			interrupts = <111>;
+			dmas = <&dmamux1 102 0x400 0x00>;
+			dma-names = "rx";
+			st,adc-channels = <1>;
+			st,adc-channel-names = "dmic1";
+			st,adc-channel-types = "SPI_R";
+			st,adc-channel-clk-src = "CLKOUT";
+			st,filter-order = <5>;
+		};
+	}

Documentation/devicetree/bindings/sound/max98373.txt

+Maxim Integrated MAX98373 Speaker Amplifier
+
+This device supports I2C.
+
+Required properties:
+
+ - compatible : "maxim,max98373"
+
+ - reg : the I2C address of the device.
+
+Optional properties:
+
+  - maxim,vmon-slot-no : slot number used to send voltage information
+                   or in inteleave mode this will be used as
+                   interleave slot.
+                   slot range : 0 ~ 15,  Default : 0
+
+  - maxim,imon-slot-no : slot number used to send current information
+                   slot range : 0 ~ 15,  Default : 0
+
+  - maxim,spkfb-slot-no : slot number used to send speaker feedback information
+                   slot range : 0 ~ 15,  Default : 0
+
+  - maxim,interleave-mode : For cases where a single combined channel
+		   for the I/V sense data is not sufficient, the device can also be configured
+		   to share a single data output channel on alternating frames.
+		   In this configuration, the current and voltage data will be frame interleaved
+		   on a single output channel.
+                   Boolean, define to enable the interleave mode, Default : false
+
+Example:
+
+codec: max98373@31 {
+   compatible = "maxim,max98373";
+   reg = <0x31>;
+   maxim,vmon-slot-no = <0>;
+   maxim,imon-slot-no = <1>;
+   maxim,spkfb-slot-no = <2>;
+   maxim,interleave-mode;
+};

Documentation/driver-api/iio/hw-consumer.rst

+===========
+HW consumer
+===========
+An IIO device can be directly connected to another device in hardware. in this
+case the buffers between IIO provider and IIO consumer are handled by hardware.
+The Industrial I/O HW consumer offers a way to bond these IIO devices without
+software buffer for data. The implementation can be found under
+:file:`drivers/iio/buffer/hw-consumer.c`
+
+
+* struct :c:type:`iio_hw_consumer` — Hardware consumer structure
+* :c:func:`iio_hw_consumer_alloc` — Allocate IIO hardware consumer
+* :c:func:`iio_hw_consumer_free` — Free IIO hardware consumer
+* :c:func:`iio_hw_consumer_enable` — Enable IIO hardware consumer
+* :c:func:`iio_hw_consumer_disable` — Disable IIO hardware consumer
+
+
+HW consumer setup
+=================
+
+As standard IIO device the implementation is based on IIO provider/consumer.
+A typical IIO HW consumer setup looks like this::
+
+	static struct iio_hw_consumer *hwc;
+
+	static const struct iio_info adc_info = {
+		.read_raw = adc_read_raw,
+	};
+
+	static int adc_read_raw(struct iio_dev *indio_dev,
+				struct iio_chan_spec const *chan, int *val,
+				int *val2, long mask)
+	{
+		ret = iio_hw_consumer_enable(hwc);
+
+		/* Acquire data */
+
+		ret = iio_hw_consumer_disable(hwc);
+	}
+
+	static int adc_probe(struct platform_device *pdev)
+	{
+		hwc = devm_iio_hw_consumer_alloc(&iio->dev);
+	}
+
+More details
+============
+.. kernel-doc:: include/linux/iio/hw-consumer.h
+.. kernel-doc:: drivers/iio/buffer/industrialio-hw-consumer.c
+   :export:
+

Documentation/driver-api/iio/index.rst

@@ -15,3 +15,4 @@ Contents:
    buffers
    triggers
    triggered-buffers
+   hw-consumer

drivers/iio/adc/Kconfig

@@ -629,6 +629,18 @@ config SPEAR_ADC
 	  To compile this driver as a module, choose M here: the
 	  module will be called spear_adc.
 
+config SD_ADC_MODULATOR
+	tristate "Generic sigma delta modulator"
+	depends on OF
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+	help
+	  Select this option to enables sigma delta modulator. This driver can
+	  support generic sigma delta modulators.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called sd_adc_modulator.
+
 config STM32_ADC_CORE
 	tristate "STMicroelectronics STM32 adc core"
 	depends on ARCH_STM32 || COMPILE_TEST
@@ -656,6 +668,31 @@ config STM32_ADC
 	  This driver can also be built as a module.  If so, the module
 	  will be called stm32-adc.
 
+config STM32_DFSDM_CORE
+	tristate "STMicroelectronics STM32 DFSDM core"
+	depends on (ARCH_STM32 && OF) || COMPILE_TEST
+	select REGMAP
+	select REGMAP_MMIO
+	help
+	  Select this option to enable the  driver for STMicroelectronics
+	  STM32 digital filter for sigma delta converter.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called stm32-dfsdm-core.
+
+config STM32_DFSDM_ADC
+	tristate "STMicroelectronics STM32 dfsdm adc"
+	depends on (ARCH_STM32 && OF) || COMPILE_TEST
+	select STM32_DFSDM_CORE
+	select REGMAP_MMIO
+	select IIO_BUFFER_HW_CONSUMER
+	help
+	  Select this option to support ADCSigma delta modulator for
+	  STMicroelectronics STM32 digital filter for sigma delta converter.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called stm32-dfsdm-adc.
+
 config STX104
 	tristate "Apex Embedded Systems STX104 driver"
 	depends on PC104 && X86 && ISA_BUS_API

drivers/iio/adc/Makefile

@@ -64,6 +64,8 @@ obj-$(CONFIG_STX104) += stx104.o
 obj-$(CONFIG_SUN4I_GPADC) += sun4i-gpadc-iio.o
 obj-$(CONFIG_STM32_ADC_CORE) += stm32-adc-core.o
 obj-$(CONFIG_STM32_ADC) += stm32-adc.o
+obj-$(CONFIG_STM32_DFSDM_CORE) += stm32-dfsdm-core.o
+obj-$(CONFIG_STM32_DFSDM_ADC) += stm32-dfsdm-adc.o
 obj-$(CONFIG_TI_ADC081C) += ti-adc081c.o
 obj-$(CONFIG_TI_ADC0832) += ti-adc0832.o
 obj-$(CONFIG_TI_ADC084S021) += ti-adc084s021.o
@@ -82,3 +84,4 @@ obj-$(CONFIG_VF610_ADC) += vf610_adc.o
 obj-$(CONFIG_VIPERBOARD_ADC) += viperboard_adc.o
 xilinx-xadc-y := xilinx-xadc-core.o xilinx-xadc-events.o
 obj-$(CONFIG_XILINX_XADC) += xilinx-xadc.o
+obj-$(CONFIG_SD_ADC_MODULATOR) += sd_adc_modulator.o

drivers/iio/adc/sd_adc_modulator.c

+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Generic sigma delta modulator driver
+ *
+ * Copyright (C) 2017, STMicroelectronics - All Rights Reserved
+ * Author: Arnaud Pouliquen <arnaud.pouliquen@st.com>.
+ */
+
+#include <linux/iio/iio.h>
+#include <linux/iio/triggered_buffer.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+
+static const struct iio_info iio_sd_mod_iio_info;
+
+static const struct iio_chan_spec iio_sd_mod_ch = {
+	.type = IIO_VOLTAGE,
+	.indexed = 1,
+	.scan_type = {
+		.sign = 'u',
+		.realbits = 1,
+		.shift = 0,
+	},
+};
+
+static int iio_sd_mod_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct iio_dev *iio;
+
+	iio = devm_iio_device_alloc(dev, 0);
+	if (!iio)
+		return -ENOMEM;
+
+	iio->dev.parent = dev;
+	iio->dev.of_node = dev->of_node;
+	iio->name = dev_name(dev);
+	iio->info = &iio_sd_mod_iio_info;
+	iio->modes = INDIO_BUFFER_HARDWARE;
+
+	iio->num_channels = 1;
+	iio->channels = &iio_sd_mod_ch;
+
+	platform_set_drvdata(pdev, iio);
+
+	return devm_iio_device_register(&pdev->dev, iio);
+}
+
+static const struct of_device_id sd_adc_of_match[] = {
+	{ .compatible = "sd-modulator" },
+	{ .compatible = "ads1201" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, sd_adc_of_match);
+
+static struct platform_driver iio_sd_mod_adc = {
+	.driver = {
+		.name = "iio_sd_adc_mod",
+		.of_match_table = of_match_ptr(sd_adc_of_match),
+	},
+	.probe = iio_sd_mod_probe,
+};
+
+module_platform_driver(iio_sd_mod_adc);
+
+MODULE_DESCRIPTION("Basic sigma delta modulator");
+MODULE_AUTHOR("Arnaud Pouliquen <arnaud.pouliquen@st.com>");
+MODULE_LICENSE("GPL v2");

drivers/iio/adc/stm32-dfsdm-core.c

+// SPDX-License-Identifier: GPL-2.0
+/*
+ * This file is part the core part STM32 DFSDM driver
+ *
+ * Copyright (C) 2017, STMicroelectronics - All Rights Reserved
+ * Author(s): Arnaud Pouliquen <arnaud.pouliquen@st.com> for STMicroelectronics.
+ */
+
+#include <linux/clk.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+#include "stm32-dfsdm.h"
+
+struct stm32_dfsdm_dev_data {
+	unsigned int num_filters;
+	unsigned int num_channels;
+	const struct regmap_config *regmap_cfg;
+};
+
+#define STM32H7_DFSDM_NUM_FILTERS	4
+#define STM32H7_DFSDM_NUM_CHANNELS	8
+
+static bool stm32_dfsdm_volatile_reg(struct device *dev, unsigned int reg)
+{
+	if (reg < DFSDM_FILTER_BASE_ADR)
+		return false;
+
+	/*
+	 * Mask is done on register to avoid to list registers of all
+	 * filter instances.
+	 */
+	switch (reg & DFSDM_FILTER_REG_MASK) {
+	case DFSDM_CR1(0) & DFSDM_FILTER_REG_MASK:
+	case DFSDM_ISR(0) & DFSDM_FILTER_REG_MASK:
+	case DFSDM_JDATAR(0) & DFSDM_FILTER_REG_MASK:
+	case DFSDM_RDATAR(0) & DFSDM_FILTER_REG_MASK:
+		return true;
+	}
+
+	return false;
+}
+
+static const struct regmap_config stm32h7_dfsdm_regmap_cfg = {
+	.reg_bits = 32,
+	.val_bits = 32,
+	.reg_stride = sizeof(u32),
+	.max_register = 0x2B8,
+	.volatile_reg = stm32_dfsdm_volatile_reg,
+	.fast_io = true,
+};
+
+static const struct stm32_dfsdm_dev_data stm32h7_dfsdm_data = {
+	.num_filters = STM32H7_DFSDM_NUM_FILTERS,
+	.num_channels = STM32H7_DFSDM_NUM_CHANNELS,
+	.regmap_cfg = &stm32h7_dfsdm_regmap_cfg,
+};
+
+struct dfsdm_priv {
+	struct platform_device *pdev; /* platform device */
+
+	struct stm32_dfsdm dfsdm; /* common data exported for all instances */
+
+	unsigned int spi_clk_out_div; /* SPI clkout divider value */
+	atomic_t n_active_ch;	/* number of current active channels */
+
+	struct clk *clk; /* DFSDM clock */
+	struct clk *aclk; /* audio clock */
+};
+
+/**
+ * stm32_dfsdm_start_dfsdm - start global dfsdm interface.
+ *
+ * Enable interface if n_active_ch is not null.
+ * @dfsdm: Handle used to retrieve dfsdm context.
+ */
+int stm32_dfsdm_start_dfsdm(struct stm32_dfsdm *dfsdm)
+{
+	struct dfsdm_priv *priv = container_of(dfsdm, struct dfsdm_priv, dfsdm);
+	struct device *dev = &priv->pdev->dev;
+	unsigned int clk_div = priv->spi_clk_out_div;
+	int ret;
+
+	if (atomic_inc_return(&priv->n_active_ch) == 1) {
+		ret = clk_prepare_enable(priv->clk);
+		if (ret < 0) {
+			dev_err(dev, "Failed to start clock\n");
+			goto error_ret;
+		}
+		if (priv->aclk) {
+			ret = clk_prepare_enable(priv->aclk);
+			if (ret < 0) {
+				dev_err(dev, "Failed to start audio clock\n");
+				goto disable_clk;
+			}
+		}
+
+		/* Output the SPI CLKOUT (if clk_div == 0 clock if OFF) */
+		ret = regmap_update_bits(dfsdm->regmap, DFSDM_CHCFGR1(0),
+					 DFSDM_CHCFGR1_CKOUTDIV_MASK,
+					 DFSDM_CHCFGR1_CKOUTDIV(clk_div));
+		if (ret < 0)
+			goto disable_aclk;
+
+		/* Global enable of DFSDM interface */
+		ret = regmap_update_bits(dfsdm->regmap, DFSDM_CHCFGR1(0),
+					 DFSDM_CHCFGR1_DFSDMEN_MASK,
+					 DFSDM_CHCFGR1_DFSDMEN(1));
+		if (ret < 0)
+			goto disable_aclk;
+	}
+
+	dev_dbg(dev, "%s: n_active_ch %d\n", __func__,
+		atomic_read(&priv->n_active_ch));
+
+	return 0;
+
+disable_aclk:
+	clk_disable_unprepare(priv->aclk);
+disable_clk:
+	clk_disable_unprepare(priv->clk);
+
+error_ret:
+	atomic_dec(&priv->n_active_ch);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(stm32_dfsdm_start_dfsdm);
+
+/**
+ * stm32_dfsdm_stop_dfsdm - stop global DFSDM interface.
+ *
+ * Disable interface if n_active_ch is null
+ * @dfsdm: Handle used to retrieve dfsdm context.
+ */
+int stm32_dfsdm_stop_dfsdm(struct stm32_dfsdm *dfsdm)
+{
+	struct dfsdm_priv *priv = container_of(dfsdm, struct dfsdm_priv, dfsdm);
+	int ret;
+
+	if (atomic_dec_and_test(&priv->n_active_ch)) {
+		/* Global disable of DFSDM interface */
+		ret = regmap_update_bits(dfsdm->regmap, DFSDM_CHCFGR1(0),
+					 DFSDM_CHCFGR1_DFSDMEN_MASK,
+					 DFSDM_CHCFGR1_DFSDMEN(0));
+		if (ret < 0)
+			return ret;
+
+		/* Stop SPI CLKOUT */
+		ret = regmap_update_bits(dfsdm->regmap, DFSDM_CHCFGR1(0),
+					 DFSDM_CHCFGR1_CKOUTDIV_MASK,
+					 DFSDM_CHCFGR1_CKOUTDIV(0));
+		if (ret < 0)
+			return ret;
+
+		clk_disable_unprepare(priv->clk);
+		if (priv->aclk)
+			clk_disable_unprepare(priv->aclk);
+	}
+	dev_dbg(&priv->pdev->dev, "%s: n_active_ch %d\n", __func__,
+		atomic_read(&priv->n_active_ch));
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(stm32_dfsdm_stop_dfsdm);
+
+static int stm32_dfsdm_parse_of(struct platform_device *pdev,
+				struct dfsdm_priv *priv)
+{
+	struct device_node *node = pdev->dev.of_node;
+	struct resource *res;
+	unsigned long clk_freq;
+	unsigned int spi_freq, rem;
+	int ret;
+
+	if (!node)
+		return -EINVAL;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "Failed to get memory resource\n");
+		return -ENODEV;
+	}
+	priv->dfsdm.phys_base = res->start;
+	priv->dfsdm.base = devm_ioremap_resource(&pdev->dev, res);
+
+	/*
+	 * "dfsdm" clock is mandatory for DFSDM peripheral clocking.
+	 * "dfsdm" or "audio" clocks can be used as source clock for
+	 * the SPI clock out signal and internal processing, depending
+	 * on use case.
+	 */
+	priv->clk = devm_clk_get(&pdev->dev, "dfsdm");
+	if (IS_ERR(priv->clk)) {
+		dev_err(&pdev->dev, "No stm32_dfsdm_clk clock found\n");
+		return -EINVAL;
+	}
+
+	priv->aclk = devm_clk_get(&pdev->dev, "audio");
+	if (IS_ERR(priv->aclk))
+		priv->aclk = NULL;
+
+	if (priv->aclk)
+		clk_freq = clk_get_rate(priv->aclk);
+	else
+		clk_freq = clk_get_rate(priv->clk);
+
+	/* SPI clock out frequency */
+	ret = of_property_read_u32(pdev->dev.of_node, "spi-max-frequency",
+				   &spi_freq);
+	if (ret < 0) {
+		/* No SPI master mode */
+		return 0;
+	}
+
+	priv->spi_clk_out_div = div_u64_rem(clk_freq, spi_freq, &rem) - 1;
+	priv->dfsdm.spi_master_freq = spi_freq;
+
+	if (rem) {
+		dev_warn(&pdev->dev, "SPI clock not accurate\n");
+		dev_warn(&pdev->dev, "%ld = %d * %d + %d\n",
+			 clk_freq, spi_freq, priv->spi_clk_out_div + 1, rem);
+	}
+
+	return 0;
+};
+
+static const struct of_device_id stm32_dfsdm_of_match[] = {
+	{
+		.compatible = "st,stm32h7-dfsdm",
+		.data = &stm32h7_dfsdm_data,
+	},
+	{}
+};
+MODULE_DEVICE_TABLE(of, stm32_dfsdm_of_match);
+
+static int stm32_dfsdm_probe(struct platform_device *pdev)
+{
+	struct dfsdm_priv *priv;
+	const struct of_device_id *of_id;
+	const struct stm32_dfsdm_dev_data *dev_data;
+	struct stm32_dfsdm *dfsdm;
+	int ret;
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->pdev = pdev;
+
+	of_id = of_match_node(stm32_dfsdm_of_match, pdev->dev.of_node);
+	if (!of_id->data) {
+		dev_err(&pdev->dev, "Data associated to device is missing\n");
+		return -EINVAL;
+	}
+
+	dev_data = (const struct stm32_dfsdm_dev_data *)of_id->data;
+	dfsdm = &priv->dfsdm;
+	dfsdm->fl_list = devm_kcalloc(&pdev->dev, dev_data->num_filters,
+				      sizeof(*dfsdm->fl_list), GFP_KERNEL);
+	if (!dfsdm->fl_list)
+		return -ENOMEM;
+
+	dfsdm->num_fls = dev_data->num_filters;
+	dfsdm->ch_list = devm_kcalloc(&pdev->dev, dev_data->num_channels,
+				      sizeof(*dfsdm->ch_list),
+				      GFP_KERNEL);
+	if (!dfsdm->ch_list)
+		return -ENOMEM;
+	dfsdm->num_chs = dev_data->num_channels;
+
+	ret = stm32_dfsdm_parse_of(pdev, priv);
+	if (ret < 0)
+		return ret;
+
+	dfsdm->regmap = devm_regmap_init_mmio_clk(&pdev->dev, "dfsdm",
+						  dfsdm->base,
+						  &stm32h7_dfsdm_regmap_cfg);
+	if (IS_ERR(dfsdm->regmap)) {
+		ret = PTR_ERR(dfsdm->regmap);
+		dev_err(&pdev->dev, "%s: Failed to allocate regmap: %d\n",
+			__func__, ret);
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, dfsdm);
+
+	return devm_of_platform_populate(&pdev->dev);
+}
+
+static struct platform_driver stm32_dfsdm_driver = {
+	.probe = stm32_dfsdm_probe,
+	.driver = {
+		.name = "stm32-dfsdm",
+		.of_match_table = stm32_dfsdm_of_match,
+	},
+};
+
+module_platform_driver(stm32_dfsdm_driver);
+
+MODULE_AUTHOR("Arnaud Pouliquen <arnaud.pouliquen@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics STM32 dfsdm driver");
+MODULE_LICENSE("GPL v2");

drivers/iio/buffer/Kconfig

@@ -29,6 +29,16 @@ config IIO_BUFFER_DMAENGINE
 
 	  Should be selected by drivers that want to use this functionality.
 
+config IIO_BUFFER_HW_CONSUMER
+	tristate "Industrial I/O HW buffering"
+	help
+	  Provides a way to bonding when an IIO device has a direct connection
+	  to another device in hardware. In this case buffers for data transfers
+	  are handled by hardware.
+
+	  Should be selected by drivers that want to use the generic Hw consumer
+	  interface.
+
 config IIO_KFIFO_BUF
 	tristate "Industrial I/O buffering based on kfifo"
 	help

drivers/iio/buffer/Makefile

@@ -7,5 +7,6 @@
 obj-$(CONFIG_IIO_BUFFER_CB) += industrialio-buffer-cb.o
 obj-$(CONFIG_IIO_BUFFER_DMA) += industrialio-buffer-dma.o
 obj-$(CONFIG_IIO_BUFFER_DMAENGINE) += industrialio-buffer-dmaengine.o
+obj-$(CONFIG_IIO_BUFFER_HW_CONSUMER) += industrialio-hw-consumer.o
 obj-$(CONFIG_IIO_TRIGGERED_BUFFER) += industrialio-triggered-buffer.o
 obj-$(CONFIG_IIO_KFIFO_BUF) += kfifo_buf.o

drivers/iio/buffer/industrialio-buffer-cb.c

@@ -104,6 +104,17 @@ struct iio_cb_buffer *iio_channel_get_all_cb(struct device *dev,
 }
 EXPORT_SYMBOL_GPL(iio_channel_get_all_cb);
 
+int iio_channel_cb_set_buffer_watermark(struct iio_cb_buffer *cb_buff,
+					size_t watermark)
+{
+	if (!watermark)
+		return -EINVAL;
+	cb_buff->buffer.watermark = watermark;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(iio_channel_cb_set_buffer_watermark);
+
 int iio_channel_start_all_cb(struct iio_cb_buffer *cb_buff)
 {
 	return iio_update_buffers(cb_buff->indio_dev, &cb_buff->buffer,

drivers/iio/buffer/industrialio-hw-consumer.c

+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2017 Analog Devices Inc.
+ *  Author: Lars-Peter Clausen <lars@metafoo.de>
+ */
+
+#include <linux/err.h>
+#include <linux/export.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/consumer.h>
+#include <linux/iio/hw-consumer.h>
+#include <linux/iio/buffer_impl.h>
+
+/**
+ * struct iio_hw_consumer - IIO hw consumer block
+ * @buffers: hardware buffers list head.
+ * @channels: IIO provider channels.
+ */
+struct iio_hw_consumer {
+	struct list_head buffers;
+	struct iio_channel *channels;
+};
+
+struct hw_consumer_buffer {
+	struct list_head head;
+	struct iio_dev *indio_dev;
+	struct iio_buffer buffer;
+	long scan_mask[];
+};
+
+static struct hw_consumer_buffer *iio_buffer_to_hw_consumer_buffer(
+	struct iio_buffer *buffer)
+{
+	return container_of(buffer, struct hw_consumer_buffer, buffer);
+}
+
+static void iio_hw_buf_release(struct iio_buffer *buffer)
+{
+	struct hw_consumer_buffer *hw_buf =
+		iio_buffer_to_hw_consumer_buffer(buffer);
+	kfree(hw_buf);
+}
+
+static const struct iio_buffer_access_funcs iio_hw_buf_access = {
+	.release = &iio_hw_buf_release,
+	.modes = INDIO_BUFFER_HARDWARE,
+};
+
+static struct hw_consumer_buffer *iio_hw_consumer_get_buffer(
+	struct iio_hw_consumer *hwc, struct iio_dev *indio_dev)
+{
+	size_t mask_size = BITS_TO_LONGS(indio_dev->masklength) * sizeof(long);
+	struct hw_consumer_buffer *buf;
+
+	list_for_each_entry(buf, &hwc->buffers, head) {
+		if (buf->indio_dev == indio_dev)
+			return buf;
+	}
+
+	buf = kzalloc(sizeof(*buf) + mask_size, GFP_KERNEL);
+	if (!buf)
+		return NULL;
+
+	buf->buffer.access = &iio_hw_buf_access;
+	buf->indio_dev = indio_dev;
+	buf->buffer.scan_mask = buf->scan_mask;
+
+	iio_buffer_init(&buf->buffer);
+	list_add_tail(&buf->head, &hwc->buffers);
+
+	return buf;
+}
+
+/**
+ * iio_hw_consumer_alloc() - Allocate IIO hardware consumer
+ * @dev: Pointer to consumer device.
+ *
+ * Returns a valid iio_hw_consumer on success or a ERR_PTR() on failure.
+ */
+struct iio_hw_consumer *iio_hw_consumer_alloc(struct device *dev)
+{
+	struct hw_consumer_buffer *buf;
+	struct iio_hw_consumer *hwc;
+	struct iio_channel *chan;
+	int ret;
+
+	hwc = kzalloc(sizeof(*hwc), GFP_KERNEL);
+	if (!hwc)
+		return ERR_PTR(-ENOMEM);
+
+	INIT_LIST_HEAD(&hwc->buffers);
+
+	hwc->channels = iio_channel_get_all(dev);
+	if (IS_ERR(hwc->channels)) {
+		ret = PTR_ERR(hwc->channels);
+		goto err_free_hwc;
+	}
+
+	chan = &hwc->channels[0];
+	while (chan->indio_dev) {
+		buf = iio_hw_consumer_get_buffer(hwc, chan->indio_dev);
+		if (!buf) {
+			ret = -ENOMEM;
+			goto err_put_buffers;
+		}
+		set_bit(chan->channel->scan_index, buf->buffer.scan_mask);
+		chan++;
+	}
+
+	return hwc;
+
+err_put_buffers:
+	list_for_each_entry(buf, &hwc->buffers, head)
+		iio_buffer_put(&buf->buffer);
+	iio_channel_release_all(hwc->channels);
+err_free_hwc:
+	kfree(hwc);
+	return ERR_PTR(ret);
+}
+EXPORT_SYMBOL_GPL(iio_hw_consumer_alloc);
+
+/**
+ * iio_hw_consumer_free() - Free IIO hardware consumer
+ * @hwc: hw consumer to free.
+ */
+void iio_hw_consumer_free(struct iio_hw_consumer *hwc)
+{
+	struct hw_consumer_buffer *buf, *n;
+
+	iio_channel_release_all(hwc->channels);
+	list_for_each_entry_safe(buf, n, &hwc->buffers, head)
+		iio_buffer_put(&buf->buffer);
+	kfree(hwc);
+}
+EXPORT_SYMBOL_GPL(iio_hw_consumer_free);
+
+static void devm_iio_hw_consumer_release(struct device *dev, void *res)
+{
+	iio_hw_consumer_free(*(struct iio_hw_consumer **)res);
+}
+
+static int devm_iio_hw_consumer_match(struct device *dev, void *res, void *data)
+{
+	struct iio_hw_consumer **r = res;
+
+	if (!r || !*r) {
+		WARN_ON(!r || !*r);
+		return 0;
+	}
+	return *r == data;
+}
+
+/**
+ * devm_iio_hw_consumer_alloc - Resource-managed iio_hw_consumer_alloc()
+ * @dev: Pointer to consumer device.
+ *
+ * Managed iio_hw_consumer_alloc. iio_hw_consumer allocated with this function
+ * is automatically freed on driver detach.
+ *
+ * If an iio_hw_consumer allocated with this function needs to be freed
+ * separately, devm_iio_hw_consumer_free() must be used.
+ *
+ * returns pointer to allocated iio_hw_consumer on success, NULL on failure.
+ */
+struct iio_hw_consumer *devm_iio_hw_consumer_alloc(struct device *dev)
+{
+	struct iio_hw_consumer **ptr, *iio_hwc;
+
+	ptr = devres_alloc(devm_iio_hw_consumer_release, sizeof(*ptr),
+			   GFP_KERNEL);
+	if (!ptr)
+		return NULL;
+
+	iio_hwc = iio_hw_consumer_alloc(dev);
+	if (IS_ERR(iio_hwc)) {
+		devres_free(ptr);
+	} else {
+		*ptr = iio_hwc;
+		devres_add(dev, ptr);
+	}
+
+	return iio_hwc;
+}
+EXPORT_SYMBOL_GPL(devm_iio_hw_consumer_alloc);
+
+/**
+ * devm_iio_hw_consumer_free - Resource-managed iio_hw_consumer_free()
+ * @dev: Pointer to consumer device.
+ * @hwc: iio_hw_consumer to free.
+ *
+ * Free iio_hw_consumer allocated with devm_iio_hw_consumer_alloc().
+ */
+void devm_iio_hw_consumer_free(struct device *dev, struct iio_hw_consumer *hwc)
+{
+	int rc;
+
+	rc = devres_release(dev, devm_iio_hw_consumer_release,
+			    devm_iio_hw_consumer_match, hwc);
+	WARN_ON(rc);
+}
+EXPORT_SYMBOL_GPL(devm_iio_hw_consumer_free);
+
+/**
+ * iio_hw_consumer_enable() - Enable IIO hardware consumer
+ * @hwc: iio_hw_consumer to enable.
+ *
+ * Returns 0 on success.
+ */
+int iio_hw_consumer_enable(struct iio_hw_consumer *hwc)
+{
+	struct hw_consumer_buffer *buf;
+	int ret;
+
+	list_for_each_entry(buf, &hwc->buffers, head) {
+		ret = iio_update_buffers(buf->indio_dev, &buf->buffer, NULL);
+		if (ret)
+			goto err_disable_buffers;
+	}
+
+	return 0;
+
+err_disable_buffers:
+	list_for_each_entry_continue_reverse(buf, &hwc->buffers, head)
+		iio_update_buffers(buf->indio_dev, NULL, &buf->buffer);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(iio_hw_consumer_enable);
+
+/**
+ * iio_hw_consumer_disable() - Disable IIO hardware consumer
+ * @hwc: iio_hw_consumer to disable.
+ */
+void iio_hw_consumer_disable(struct iio_hw_consumer *hwc)
+{
+	struct hw_consumer_buffer *buf;
+
+	list_for_each_entry(buf, &hwc->buffers, head)
+		iio_update_buffers(buf->indio_dev, NULL, &buf->buffer);
+}
+EXPORT_SYMBOL_GPL(iio_hw_consumer_disable);
+
+MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
+MODULE_DESCRIPTION("Hardware consumer buffer the IIO framework");
+MODULE_LICENSE("GPL v2");

drivers/iio/inkern.c

@@ -664,9 +664,8 @@ int iio_convert_raw_to_processed(struct iio_channel *chan, int raw,
 }
 EXPORT_SYMBOL_GPL(iio_convert_raw_to_processed);
 
-static int iio_read_channel_attribute(struct iio_channel *chan,
-				      int *val, int *val2,
-				      enum iio_chan_info_enum attribute)
+int iio_read_channel_attribute(struct iio_channel *chan, int *val, int *val2,
+			       enum iio_chan_info_enum attribute)
 {
 	int ret;
 
@@ -682,6 +681,7 @@ static int iio_read_channel_attribute(struct iio_channel *chan,
 
 	return ret;
 }
+EXPORT_SYMBOL_GPL(iio_read_channel_attribute);
 
 int iio_read_channel_offset(struct iio_channel *chan, int *val, int *val2)
 {
@@ -850,7 +850,8 @@ static int iio_channel_write(struct iio_channel *chan, int val, int val2,
 						chan->channel, val, val2, info);
 }
 
-int iio_write_channel_raw(struct iio_channel *chan, int val)
+int iio_write_channel_attribute(struct iio_channel *chan, int val, int val2,
+				enum iio_chan_info_enum attribute)
 {
 	int ret;
 
@@ -860,12 +861,18 @@ int iio_write_channel_raw(struct iio_channel *chan, int val)
 		goto err_unlock;
 	}
 
-	ret = iio_channel_write(chan, val, 0, IIO_CHAN_INFO_RAW);
+	ret = iio_channel_write(chan, val, val2, attribute);
 err_unlock:
 	mutex_unlock(&chan->indio_dev->info_exist_lock);
 
 	return ret;
 }
+EXPORT_SYMBOL_GPL(iio_write_channel_attribute);
+
+int iio_write_channel_raw(struct iio_channel *chan, int val)
+{
+	return iio_write_channel_attribute(chan, val, 0, IIO_CHAN_INFO_RAW);
+}
 EXPORT_SYMBOL_GPL(iio_write_channel_raw);
 
 unsigned int iio_get_channel_ext_info_count(struct iio_channel *chan)

include/linux/iio/adc/stm32-dfsdm-adc.h

+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * This file discribe the STM32 DFSDM IIO driver API for audio part
+ *
+ * Copyright (C) 2017, STMicroelectronics - All Rights Reserved
+ * Author(s): Arnaud Pouliquen <arnaud.pouliquen@st.com>.
+ */
+
+#ifndef STM32_DFSDM_ADC_H
+#define STM32_DFSDM_ADC_H
+
+int stm32_dfsdm_get_buff_cb(struct iio_dev *iio_dev,
+			    int (*cb)(const void *data, size_t size,
+				      void *private),
+			    void *private);
+int stm32_dfsdm_release_buff_cb(struct iio_dev *iio_dev);
+
+#endif

include/linux/iio/consumer.h

@@ -133,6 +133,17 @@ struct iio_cb_buffer *iio_channel_get_all_cb(struct device *dev,
 					     int (*cb)(const void *data,
 						       void *private),
 					     void *private);
+/**
+ * iio_channel_cb_set_buffer_watermark() - set the buffer watermark.
+ * @cb_buffer:		The callback buffer from whom we want the channel
+ *			information.
+ * @watermark: buffer watermark in bytes.
+ *
+ * This function allows to configure the buffer watermark.
+ */
+int iio_channel_cb_set_buffer_watermark(struct iio_cb_buffer *cb_buffer,
+					size_t watermark);
+
 /**
  * iio_channel_release_all_cb() - release and unregister the callback.
  * @cb_buffer:		The callback buffer that was allocated.
@@ -215,6 +226,32 @@ int iio_read_channel_average_raw(struct iio_channel *chan, int *val);
  */
 int iio_read_channel_processed(struct iio_channel *chan, int *val);
 
+/**
+ * iio_write_channel_attribute() - Write values to the device attribute.
+ * @chan:	The channel being queried.
+ * @val:	Value being written.
+ * @val2:	Value being written.val2 use depends on attribute type.
+ * @attribute:	info attribute to be read.
+ *
+ * Returns an error code or 0.
+ */
+int iio_write_channel_attribute(struct iio_channel *chan, int val,
+				int val2, enum iio_chan_info_enum attribute);
+
+/**
+ * iio_read_channel_attribute() - Read values from the device attribute.
+ * @chan:	The channel being queried.
+ * @val:	Value being written.
+ * @val2:	Value being written.Val2 use depends on attribute type.
+ * @attribute:	info attribute to be written.
+ *
+ * Returns an error code if failed. Else returns a description of what is in val
+ * and val2, such as IIO_VAL_INT_PLUS_MICRO telling us we have a value of val
+ * + val2/1e6
+ */
+int iio_read_channel_attribute(struct iio_channel *chan, int *val,
+			       int *val2, enum iio_chan_info_enum attribute);
+
 /**
  * iio_write_channel_raw() - write to a given channel
  * @chan:		The channel being queried.

include/linux/iio/hw-consumer.h

+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Industrial I/O in kernel hardware consumer interface
+ *
+ * Copyright 2017 Analog Devices Inc.
+ *  Author: Lars-Peter Clausen <lars@metafoo.de>
+ */
+
+#ifndef LINUX_IIO_HW_CONSUMER_H
+#define LINUX_IIO_HW_CONSUMER_H
+
+struct iio_hw_consumer;
+
+struct iio_hw_consumer *iio_hw_consumer_alloc(struct device *dev);
+void iio_hw_consumer_free(struct iio_hw_consumer *hwc);
+struct iio_hw_consumer *devm_iio_hw_consumer_alloc(struct device *dev);
+void devm_iio_hw_consumer_free(struct device *dev, struct iio_hw_consumer *hwc);
+int iio_hw_consumer_enable(struct iio_hw_consumer *hwc);
+void iio_hw_consumer_disable(struct iio_hw_consumer *hwc);
+
+#endif

include/linux/iio/iio.h

@@ -20,34 +20,6 @@
  * Currently assumes nano seconds.
  */
 
-enum iio_chan_info_enum {
-	IIO_CHAN_INFO_RAW = 0,
-	IIO_CHAN_INFO_PROCESSED,
-	IIO_CHAN_INFO_SCALE,
-	IIO_CHAN_INFO_OFFSET,
-	IIO_CHAN_INFO_CALIBSCALE,
-	IIO_CHAN_INFO_CALIBBIAS,
-	IIO_CHAN_INFO_PEAK,
-	IIO_CHAN_INFO_PEAK_SCALE,
-	IIO_CHAN_INFO_QUADRATURE_CORRECTION_RAW,
-	IIO_CHAN_INFO_AVERAGE_RAW,
-	IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY,
-	IIO_CHAN_INFO_HIGH_PASS_FILTER_3DB_FREQUENCY,
-	IIO_CHAN_INFO_SAMP_FREQ,
-	IIO_CHAN_INFO_FREQUENCY,
-	IIO_CHAN_INFO_PHASE,
-	IIO_CHAN_INFO_HARDWAREGAIN,
-	IIO_CHAN_INFO_HYSTERESIS,
-	IIO_CHAN_INFO_INT_TIME,
-	IIO_CHAN_INFO_ENABLE,
-	IIO_CHAN_INFO_CALIBHEIGHT,
-	IIO_CHAN_INFO_CALIBWEIGHT,
-	IIO_CHAN_INFO_DEBOUNCE_COUNT,
-	IIO_CHAN_INFO_DEBOUNCE_TIME,
-	IIO_CHAN_INFO_CALIBEMISSIVITY,
-	IIO_CHAN_INFO_OVERSAMPLING_RATIO,
-};
-
 enum iio_shared_by {
 	IIO_SEPARATE,
 	IIO_SHARED_BY_TYPE,

include/linux/iio/types.h

@@ -34,4 +34,32 @@ enum iio_available_type {
 	IIO_AVAIL_RANGE,
 };
 
+enum iio_chan_info_enum {
+	IIO_CHAN_INFO_RAW = 0,
+	IIO_CHAN_INFO_PROCESSED,
+	IIO_CHAN_INFO_SCALE,
+	IIO_CHAN_INFO_OFFSET,
+	IIO_CHAN_INFO_CALIBSCALE,
+	IIO_CHAN_INFO_CALIBBIAS,
+	IIO_CHAN_INFO_PEAK,
+	IIO_CHAN_INFO_PEAK_SCALE,
+	IIO_CHAN_INFO_QUADRATURE_CORRECTION_RAW,
+	IIO_CHAN_INFO_AVERAGE_RAW,
+	IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY,
+	IIO_CHAN_INFO_HIGH_PASS_FILTER_3DB_FREQUENCY,
+	IIO_CHAN_INFO_SAMP_FREQ,
+	IIO_CHAN_INFO_FREQUENCY,
+	IIO_CHAN_INFO_PHASE,
+	IIO_CHAN_INFO_HARDWAREGAIN,
+	IIO_CHAN_INFO_HYSTERESIS,
+	IIO_CHAN_INFO_INT_TIME,
+	IIO_CHAN_INFO_ENABLE,
+	IIO_CHAN_INFO_CALIBHEIGHT,
+	IIO_CHAN_INFO_CALIBWEIGHT,
+	IIO_CHAN_INFO_DEBOUNCE_COUNT,
+	IIO_CHAN_INFO_DEBOUNCE_TIME,
+	IIO_CHAN_INFO_CALIBEMISSIVITY,
+	IIO_CHAN_INFO_OVERSAMPLING_RATIO,
+};
+
 #endif /* _IIO_TYPES_H_ */

sound/soc/codecs/Kconfig

@@ -95,6 +95,7 @@ config SND_SOC_ALL_CODECS
 	select SND_SOC_MAX98925 if I2C
 	select SND_SOC_MAX98926 if I2C
 	select SND_SOC_MAX98927 if I2C
+	select SND_SOC_MAX98373 if I2C
 	select SND_SOC_MAX9850 if I2C
 	select SND_SOC_MAX9860 if I2C
 	select SND_SOC_MAX9768 if I2C
@@ -624,6 +625,10 @@ config SND_SOC_MAX98927
 	tristate "Maxim Integrated MAX98927 Speaker Amplifier"
 	depends on I2C
 
+config SND_SOC_MAX98373
+	tristate "Maxim Integrated MAX98373 Speaker Amplifier"
+	depends on I2C
+
 config SND_SOC_MAX9850
 	tristate
 

sound/soc/codecs/Makefile

@@ -90,6 +90,7 @@ snd-soc-max9867-objs := max9867.o
 snd-soc-max98925-objs := max98925.o
 snd-soc-max98926-objs := max98926.o
 snd-soc-max98927-objs := max98927.o
+snd-soc-max98373-objs := max98373.o
 snd-soc-max9850-objs := max9850.o
 snd-soc-max9860-objs := max9860.o
 snd-soc-mc13783-objs := mc13783.o
@@ -332,6 +333,7 @@ obj-$(CONFIG_SND_SOC_MAX9867)	+= snd-soc-max9867.o
 obj-$(CONFIG_SND_SOC_MAX98925)	+= snd-soc-max98925.o
 obj-$(CONFIG_SND_SOC_MAX98926)	+= snd-soc-max98926.o
 obj-$(CONFIG_SND_SOC_MAX98927)	+= snd-soc-max98927.o
+obj-$(CONFIG_SND_SOC_MAX98373)	+= snd-soc-max98373.o
 obj-$(CONFIG_SND_SOC_MAX9850)	+= snd-soc-max9850.o
 obj-$(CONFIG_SND_SOC_MAX9860)	+= snd-soc-max9860.o
 obj-$(CONFIG_SND_SOC_MC13783)	+= snd-soc-mc13783.o

sound/soc/codecs/hdac_hdmi.c

@@ -2186,6 +2186,8 @@ static const struct hda_device_id hdmi_list[] = {
 	HDA_CODEC_EXT_ENTRY(0x80862809, 0x100000, "Skylake HDMI", 0),
 	HDA_CODEC_EXT_ENTRY(0x8086280a, 0x100000, "Broxton HDMI", 0),
 	HDA_CODEC_EXT_ENTRY(0x8086280b, 0x100000, "Kabylake HDMI", 0),
+	HDA_CODEC_EXT_ENTRY(0x8086280c, 0x100000, "Cannonlake HDMI",
+						   &intel_glk_drv_data),
 	HDA_CODEC_EXT_ENTRY(0x8086280d, 0x100000, "Geminilake HDMI",
 						   &intel_glk_drv_data),
 	{}

sound/soc/codecs/max98373.h

+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright (c) 2017, Maxim Integrated */
+#ifndef _MAX98373_H
+#define _MAX98373_H
+
+#define MAX98373_R2000_SW_RESET 0x2000
+#define MAX98373_R2001_INT_RAW1 0x2001
+#define MAX98373_R2002_INT_RAW2 0x2002
+#define MAX98373_R2003_INT_RAW3 0x2003
+#define MAX98373_R2004_INT_STATE1 0x2004
+#define MAX98373_R2005_INT_STATE2 0x2005
+#define MAX98373_R2006_INT_STATE3 0x2006
+#define MAX98373_R2007_INT_FLAG1 0x2007
+#define MAX98373_R2008_INT_FLAG2 0x2008
+#define MAX98373_R2009_INT_FLAG3 0x2009
+#define MAX98373_R200A_INT_EN1 0x200A
+#define MAX98373_R200B_INT_EN2 0x200B
+#define MAX98373_R200C_INT_EN3 0x200C
+#define MAX98373_R200D_INT_FLAG_CLR1 0x200D
+#define MAX98373_R200E_INT_FLAG_CLR2 0x200E
+#define MAX98373_R200F_INT_FLAG_CLR3 0x200F
+#define MAX98373_R2010_IRQ_CTRL 0x2010
+#define MAX98373_R2014_THERM_WARN_THRESH 0x2014
+#define MAX98373_R2015_THERM_SHDN_THRESH 0x2015
+#define MAX98373_R2016_THERM_HYSTERESIS 0x2016
+#define MAX98373_R2017_THERM_FOLDBACK_SET 0x2017
+#define MAX98373_R2018_THERM_FOLDBACK_EN 0x2018
+#define MAX98373_R201E_PIN_DRIVE_STRENGTH 0x201E
+#define MAX98373_R2020_PCM_TX_HIZ_EN_1 0x2020
+#define MAX98373_R2021_PCM_TX_HIZ_EN_2 0x2021
+#define MAX98373_R2022_PCM_TX_SRC_1 0x2022
+#define MAX98373_R2023_PCM_TX_SRC_2 0x2023
+#define MAX98373_R2024_PCM_DATA_FMT_CFG	0x2024
+#define MAX98373_R2025_AUDIO_IF_MODE 0x2025
+#define MAX98373_R2026_PCM_CLOCK_RATIO 0x2026
+#define MAX98373_R2027_PCM_SR_SETUP_1 0x2027
+#define MAX98373_R2028_PCM_SR_SETUP_2 0x2028
+#define MAX98373_R2029_PCM_TO_SPK_MONO_MIX_1 0x2029
+#define MAX98373_R202A_PCM_TO_SPK_MONO_MIX_2 0x202A
+#define MAX98373_R202B_PCM_RX_EN 0x202B
+#define MAX98373_R202C_PCM_TX_EN 0x202C
+#define MAX98373_R202E_ICC_RX_CH_EN_1 0x202E
+#define MAX98373_R202F_ICC_RX_CH_EN_2 0x202F
+#define MAX98373_R2030_ICC_TX_HIZ_EN_1 0x2030
+#define MAX98373_R2031_ICC_TX_HIZ_EN_2 0x2031
+#define MAX98373_R2032_ICC_LINK_EN_CFG 0x2032
+#define MAX98373_R2034_ICC_TX_CNTL 0x2034
+#define MAX98373_R2035_ICC_TX_EN 0x2035
+#define MAX98373_R2036_SOUNDWIRE_CTRL 0x2036
+#define MAX98373_R203D_AMP_DIG_VOL_CTRL 0x203D
+#define MAX98373_R203E_AMP_PATH_GAIN 0x203E
+#define MAX98373_R203F_AMP_DSP_CFG 0x203F
+#define MAX98373_R2040_TONE_GEN_CFG 0x2040
+#define MAX98373_R2041_AMP_CFG 0x2041
+#define MAX98373_R2042_AMP_EDGE_RATE_CFG 0x2042
+#define MAX98373_R2043_AMP_EN 0x2043
+#define MAX98373_R2046_IV_SENSE_ADC_DSP_CFG 0x2046
+#define MAX98373_R2047_IV_SENSE_ADC_EN 0x2047
+#define MAX98373_R2051_MEAS_ADC_SAMPLING_RATE 0x2051
+#define MAX98373_R2052_MEAS_ADC_PVDD_FLT_CFG 0x2052
+#define MAX98373_R2053_MEAS_ADC_THERM_FLT_CFG 0x2053
+#define MAX98373_R2054_MEAS_ADC_PVDD_CH_READBACK 0x2054
+#define MAX98373_R2055_MEAS_ADC_THERM_CH_READBACK 0x2055
+#define MAX98373_R2056_MEAS_ADC_PVDD_CH_EN 0x2056
+#define MAX98373_R2090_BDE_LVL_HOLD 0x2090
+#define MAX98373_R2091_BDE_GAIN_ATK_REL_RATE 0x2091
+#define MAX98373_R2092_BDE_CLIPPER_MODE 0x2092
+#define MAX98373_R2097_BDE_L1_THRESH 0x2097
+#define MAX98373_R2098_BDE_L2_THRESH 0x2098
+#define MAX98373_R2099_BDE_L3_THRESH 0x2099
+#define MAX98373_R209A_BDE_L4_THRESH 0x209A
+#define MAX98373_R209B_BDE_THRESH_HYST 0x209B
+#define MAX98373_R20A8_BDE_L1_CFG_1 0x20A8
+#define MAX98373_R20A9_BDE_L1_CFG_2 0x20A9
+#define MAX98373_R20AA_BDE_L1_CFG_3 0x20AA
+#define MAX98373_R20AB_BDE_L2_CFG_1 0x20AB
+#define MAX98373_R20AC_BDE_L2_CFG_2 0x20AC
+#define MAX98373_R20AD_BDE_L2_CFG_3 0x20AD
+#define MAX98373_R20AE_BDE_L3_CFG_1 0x20AE
+#define MAX98373_R20AF_BDE_L3_CFG_2 0x20AF
+#define MAX98373_R20B0_BDE_L3_CFG_3 0x20B0
+#define MAX98373_R20B1_BDE_L4_CFG_1 0x20B1
+#define MAX98373_R20B2_BDE_L4_CFG_2 0x20B2
+#define MAX98373_R20B3_BDE_L4_CFG_3 0x20B3
+#define MAX98373_R20B4_BDE_INFINITE_HOLD_RELEASE 0x20B4
+#define MAX98373_R20B5_BDE_EN 0x20B5
+#define MAX98373_R20B6_BDE_CUR_STATE_READBACK 0x20B6
+#define MAX98373_R20D1_DHT_CFG 0x20D1
+#define MAX98373_R20D2_DHT_ATTACK_CFG 0x20D2
+#define MAX98373_R20D3_DHT_RELEASE_CFG 0x20D3
+#define MAX98373_R20D4_DHT_EN 0x20D4
+#define MAX98373_R20E0_LIMITER_THRESH_CFG 0x20E0
+#define MAX98373_R20E1_LIMITER_ATK_REL_RATES 0x20E1
+#define MAX98373_R20E2_LIMITER_EN 0x20E2
+#define MAX98373_R20FE_DEVICE_AUTO_RESTART_CFG 0x20FE
+#define MAX98373_R20FF_GLOBAL_SHDN 0x20FF
+#define MAX98373_R21FF_REV_ID 0x21FF
+
+/* MAX98373_R2022_PCM_TX_SRC_1 */
+#define MAX98373_PCM_TX_CH_SRC_A_V_SHIFT (0)
+#define MAX98373_PCM_TX_CH_SRC_A_I_SHIFT (4)
+
+/* MAX98373_R2024_PCM_DATA_FMT_CFG */
+#define MAX98373_PCM_MODE_CFG_FORMAT_MASK (0x7 << 3)
+#define MAX98373_PCM_MODE_CFG_FORMAT_SHIFT (3)
+#define MAX98373_PCM_TX_CH_INTERLEAVE_MASK (0x1 << 2)
+#define MAX98373_PCM_FORMAT_I2S (0x0 << 0)
+#define MAX98373_PCM_FORMAT_LJ (0x1 << 0)
+#define MAX98373_PCM_FORMAT_TDM_MODE0 (0x3 << 0)
+#define MAX98373_PCM_FORMAT_TDM_MODE1 (0x4 << 0)
+#define MAX98373_PCM_FORMAT_TDM_MODE2 (0x5 << 0)
+#define MAX98373_PCM_MODE_CFG_CHANSZ_MASK (0x3 << 6)
+#define MAX98373_PCM_MODE_CFG_CHANSZ_16 (0x1 << 6)
+#define MAX98373_PCM_MODE_CFG_CHANSZ_24 (0x2 << 6)
+#define MAX98373_PCM_MODE_CFG_CHANSZ_32 (0x3 << 6)
+
+/* MAX98373_R2026_PCM_CLOCK_RATIO */
+#define MAX98373_PCM_MODE_CFG_PCM_BCLKEDGE (0x1 << 4)
+#define MAX98373_PCM_CLK_SETUP_BSEL_MASK (0xF << 0)
+
+/* MAX98373_R2027_PCM_SR_SETUP_1 */
+#define MAX98373_PCM_SR_SET1_SR_MASK (0xF << 0)
+#define MAX98373_PCM_SR_SET1_SR_8000 (0x0 << 0)
+#define MAX98373_PCM_SR_SET1_SR_11025 (0x1 << 0)
+#define MAX98373_PCM_SR_SET1_SR_12000 (0x2 << 0)
+#define MAX98373_PCM_SR_SET1_SR_16000 (0x3 << 0)
+#define MAX98373_PCM_SR_SET1_SR_22050 (0x4 << 0)
+#define MAX98373_PCM_SR_SET1_SR_24000 (0x5 << 0)
+#define MAX98373_PCM_SR_SET1_SR_32000 (0x6 << 0)
+#define MAX98373_PCM_SR_SET1_SR_44100 (0x7 << 0)
+#define MAX98373_PCM_SR_SET1_SR_48000 (0x8 << 0)
+
+/* MAX98373_R2028_PCM_SR_SETUP_2 */
+#define MAX98373_PCM_SR_SET2_SR_MASK (0xF << 4)
+#define MAX98373_PCM_SR_SET2_SR_SHIFT (4)
+#define MAX98373_PCM_SR_SET2_IVADC_SR_MASK (0xF << 0)
+
+/* MAX98373_R2029_PCM_TO_SPK_MONO_MIX_1 */
+#define MAX98373_PCM_TO_SPK_MONOMIX_CFG_MASK (0x3 << 6)
+#define MAX98373_PCM_TO_SPK_MONOMIX_CFG_SHIFT (6)
+#define MAX98373_PCM_TO_SPK_CH0_SRC_MASK (0xF << 0)
+
+/* MAX98373_R203E_AMP_PATH_GAIN */
+#define MAX98373_SPK_DIGI_GAIN_MASK (0xF << 4)
+#define MAX98373_SPK_DIGI_GAIN_SHIFT (4)
+#define MAX98373_FS_GAIN_MAX_MASK (0xF << 0)
+#define MAX98373_FS_GAIN_MAX_SHIFT (0)
+
+/* MAX98373_R203F_AMP_DSP_CFG */
+#define MAX98373_AMP_DSP_CFG_DCBLK_SHIFT (0)
+#define MAX98373_AMP_DSP_CFG_DITH_SHIFT (1)
+#define MAX98373_AMP_DSP_CFG_RMP_UP_SHIFT (2)
+#define MAX98373_AMP_DSP_CFG_RMP_DN_SHIFT (3)
+#define MAX98373_AMP_DSP_CFG_DAC_INV_SHIFT (5)
+#define MAX98373_AMP_VOL_SEL_SHIFT (7)
+
+/* MAX98373_R2043_AMP_EN */
+#define MAX98373_SPKFB_EN_MASK (0x1 << 1)
+#define MAX98373_SPK_EN_MASK (0x1 << 0)
+#define MAX98373_SPKFB_EN_SHIFT (1)
+
+/*MAX98373_R2052_MEAS_ADC_PVDD_FLT_CFG */
+#define MAX98373_FLT_EN_SHIFT (4)
+
+/* MAX98373_R20B2_BDE_L4_CFG_2 */
+#define MAX98373_LVL4_MUTE_EN_SHIFT (7)
+#define MAX98373_LVL4_HOLD_EN_SHIFT (6)
+
+/* MAX98373_R20B5_BDE_EN */
+#define MAX98373_BDE_EN_SHIFT (0)
+
+/* MAX98373_R20D1_DHT_CFG */
+#define MAX98373_DHT_SPK_GAIN_MIN_SHIFT	(4)
+#define MAX98373_DHT_ROT_PNT_SHIFT	(0)
+
+/* MAX98373_R20D2_DHT_ATTACK_CFG */
+#define MAX98373_DHT_ATTACK_STEP_SHIFT (3)
+#define MAX98373_DHT_ATTACK_RATE_SHIFT (0)
+
+/* MAX98373_R20D3_DHT_RELEASE_CFG */
+#define MAX98373_DHT_RELEASE_STEP_SHIFT (3)
+#define MAX98373_DHT_RELEASE_RATE_SHIFT (0)
+
+/* MAX98373_R20D4_DHT_EN */
+#define MAX98373_DHT_EN_SHIFT (0)
+
+/* MAX98373_R20E0_LIMITER_THRESH_CFG */
+#define MAX98373_LIMITER_THRESH_SHIFT (2)
+#define MAX98373_LIMITER_THRESH_SRC_SHIFT (0)
+
+/* MAX98373_R20E2_LIMITER_EN */
+#define MAX98373_LIMITER_EN_SHIFT (0)
+
+/* MAX98373_R20FE_DEVICE_AUTO_RESTART_CFG */
+#define MAX98373_CLOCK_MON_SHIFT (0)
+
+/* MAX98373_R20FF_GLOBAL_SHDN */
+#define MAX98373_GLOBAL_EN_MASK (0x1 << 0)
+
+/* MAX98373_R2000_SW_RESET */
+#define MAX98373_SOFT_RESET (0x1 << 0)
+
+struct max98373_priv {
+	struct regmap *regmap;
+	unsigned int v_slot;
+	unsigned int i_slot;
+	unsigned int spkfb_slot;
+	bool interleave_mode;
+	unsigned int ch_size;
+	bool tdm_mode;
+};
+#endif

sound/soc/hisilicon/hi6210-i2s.c

@@ -36,7 +36,6 @@
 #include <linux/of_irq.h>
 #include <linux/mfd/syscon.h>
 #include <linux/reset-controller.h>
-#include <linux/clk.h>
 
 #include "hi6210-i2s.h"