drm/msm/dsi/phy: fix 7nm v4.0 settings for C-PHY mode

The dsi_7nm_phy_enable() disagrees with downstream for
glbl_str_swi_cal_sel_ctrl and glbl_hstx_str_ctrl_0 values. Update
programmed settings to match downstream driver. To remove the
possibility for such errors in future drop less_than_1500_mhz
assignment and specify settings explicitly.

Fixes: 5ac17838 ("drm/msm/dsi: support CPHY mode for 7nm pll/phy")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Link: https://lore.kernel.org/r/20220217000837.435340-1-dmitry.baryshkov@linaro.orgSigned-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c

@@ -864,20 +864,26 @@ static int dsi_7nm_phy_enable(struct msm_dsi_phy *phy,
 	/* Alter PHY configurations if data rate less than 1.5GHZ*/
 	less_than_1500_mhz = (clk_req->bitclk_rate <= 1500000000);
 
-	/* For C-PHY, no low power settings for lower clk rate */
-	if (phy->cphy_mode)
-		less_than_1500_mhz = false;
-
 	if (phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V4_1) {
 		vreg_ctrl_0 = less_than_1500_mhz ? 0x53 : 0x52;
+		if (phy->cphy_mode) {
+			glbl_rescode_top_ctrl = 0x00;
+			glbl_rescode_bot_ctrl = 0x3c;
+		} else {
 			glbl_rescode_top_ctrl = less_than_1500_mhz ? 0x3d :  0x00;
 			glbl_rescode_bot_ctrl = less_than_1500_mhz ? 0x39 :  0x3c;
+		}
 		glbl_str_swi_cal_sel_ctrl = 0x00;
 		glbl_hstx_str_ctrl_0 = 0x88;
 	} else {
 		vreg_ctrl_0 = less_than_1500_mhz ? 0x5B : 0x59;
+		if (phy->cphy_mode) {
+			glbl_str_swi_cal_sel_ctrl = 0x03;
+			glbl_hstx_str_ctrl_0 = 0x66;
+		} else {
 			glbl_str_swi_cal_sel_ctrl = less_than_1500_mhz ? 0x03 : 0x00;
 			glbl_hstx_str_ctrl_0 = less_than_1500_mhz ? 0x66 : 0x88;
+		}
 		glbl_rescode_top_ctrl = 0x03;
 		glbl_rescode_bot_ctrl = 0x3c;
 	}