staging: mt7621-pci: remove some dead code.

Some code is dead because it is commented out.
Some is dead because it is uninteresting printks.
Some is dead because it declares unused functions.

Remove it all.
Signed-off-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/mt7621-pci/pci-mt7621.c

@@ -56,9 +56,6 @@
 
 #include <ralink_regs.h>
 
-extern void pcie_phy_init(void);
-extern void chk_phy_pll(void);
-
 /*
  * These functions and structures provide the BIOS scan and mapping of the PCI
  * devices.
@@ -364,11 +361,8 @@ pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 void
 set_pcie_phy(u32 *addr, int start_b, int bits, int val)
 {
-//	printk("0x%p:", addr);
-//	printk(" %x", *addr);
 	*(unsigned int *)(addr) &= ~(((1<<bits) - 1)<<start_b);
 	*(unsigned int *)(addr) |= val << start_b;
-//	printk(" -> %x\n", *addr);
 }
 
 void
@@ -497,7 +491,6 @@ static int mt7621_pci_probe(struct platform_device *pdev)
 	val |= RALINK_PCIE2_RST;
 
 	ASSERT_SYSRST_PCIE(RALINK_PCIE0_RST | RALINK_PCIE1_RST | RALINK_PCIE2_RST);
-	printk("pull PCIe RST: RALINK_RSTCTRL = %x\n", RALINK_RSTCTRL);
 
 	*(unsigned int *)(0xbe000060) &= ~(0x3<<10 | 0x3<<3);
 	*(unsigned int *)(0xbe000060) |= 0x1<<10 | 0x1<<3;
@@ -513,12 +506,10 @@ static int mt7621_pci_probe(struct platform_device *pdev)
 	val |= RALINK_PCIE2_RST;
 
 	DEASSERT_SYSRST_PCIE(val);
-	printk("release PCIe RST: RALINK_RSTCTRL = %x\n", RALINK_RSTCTRL);
 
 	if ((*(unsigned int *)(0xbe00000c)&0xFFFF) == 0x0101) // MT7621 E2
 		bypass_pipe_rst();
 	set_phy_for_ssc();
-	printk("release PCIe RST: RALINK_RSTCTRL = %x\n", RALINK_RSTCTRL);
 
 	read_config(0, 0, 0, 0x70c, &val);
 	printk("Port 0 N_FTS = %x\n", (unsigned int)val);
@@ -614,8 +605,6 @@ pcie(2/1/0) link status	pcie2_num	pcie1_num	pcie0_num
 		RALINK_PCI_PCICFG_ADDR |= 0x1 << 24;	//port2
 		break;
 	}
-	printk(" -> %x\n", RALINK_PCI_PCICFG_ADDR);
-	//printk(" RALINK_PCI_ARBCTL = %x\n", RALINK_PCI_ARBCTL);
 
 /*
 	ioport_resource.start = mt7621_res_pci_io1.start;
@@ -653,7 +642,6 @@ pcie(2/1/0) link status	pcie2_num	pcie1_num	pcie0_num
 	case 7:
 		read_config(0, 2, 0, 0x4, &val);
 		write_config(0, 2, 0, 0x4, val|0x4);
-		// write_config(0, 1, 0, 0x4, val|0x7);
 		read_config(0, 2, 0, 0x70c, &val);
 		val &= ~(0xff)<<8;
 		val |= 0x50<<8;
@@ -663,7 +651,6 @@ pcie(2/1/0) link status	pcie2_num	pcie1_num	pcie0_num
 	case 6:
 		read_config(0, 1, 0, 0x4, &val);
 		write_config(0, 1, 0, 0x4, val|0x4);
-		// write_config(0, 1, 0, 0x4, val|0x7);
 		read_config(0, 1, 0, 0x70c, &val);
 		val &= ~(0xff)<<8;
 		val |= 0x50<<8;
@@ -671,7 +658,6 @@ pcie(2/1/0) link status	pcie2_num	pcie1_num	pcie0_num
 	default:
 		read_config(0, 0, 0, 0x4, &val);
 		write_config(0, 0, 0, 0x4, val|0x4); //bus master enable
-		// write_config(0, 0, 0, 0x4, val|0x7); //bus master enable
 		read_config(0, 0, 0, 0x70c, &val);
 		val &= ~(0xff)<<8;
 		val |= 0x50<<8;