Commit bbc86087 authored by Dmitry Torokhov's avatar Dmitry Torokhov

Merge branch 'next' into for-linus

Prepare second round of input updates for 4.14 merge window.
parents a6cbfa1e 697c5d8a
* PWM vibrator device tree bindings
Registers a PWM device as vibrator. It is expected, that the vibrator's
strength increases based on the duty cycle of the enable PWM channel
(100% duty cycle meaning strongest vibration, 0% meaning no vibration).
The binding supports an optional direction PWM channel, that can be
driven at fixed duty cycle. If available this is can be used to increase
the vibration effect of some devices.
Required properties:
- compatible: should contain "pwm-vibrator"
- pwm-names: Should contain "enable" and optionally "direction"
- pwms: Should contain a PWM handle for each entry in pwm-names
Optional properties:
- vcc-supply: Phandle for the regulator supplying power
- direction-duty-cycle-ns: Duty cycle of the direction PWM channel in
nanoseconds, defaults to 50% of the channel's
period.
Example from Motorola Droid 4:
&omap4_pmx_core {
vibrator_direction_pin: pinmux_vibrator_direction_pin {
pinctrl-single,pins = <
OMAP4_IOPAD(0x1ce, PIN_OUTPUT | MUX_MODE1) /* dmtimer8_pwm_evt (gpio_27) */
>;
};
vibrator_enable_pin: pinmux_vibrator_enable_pin {
pinctrl-single,pins = <
OMAP4_IOPAD(0X1d0, PIN_OUTPUT | MUX_MODE1) /* dmtimer9_pwm_evt (gpio_28) */
>;
};
};
/ {
pwm8: dmtimer-pwm {
pinctrl-names = "default";
pinctrl-0 = <&vibrator_direction_pin>;
compatible = "ti,omap-dmtimer-pwm";
#pwm-cells = <3>;
ti,timers = <&timer8>;
ti,clock-source = <0x01>;
};
pwm9: dmtimer-pwm {
pinctrl-names = "default";
pinctrl-0 = <&vibrator_enable_pin>;
compatible = "ti,omap-dmtimer-pwm";
#pwm-cells = <3>;
ti,timers = <&timer9>;
ti,clock-source = <0x01>;
};
vibrator {
compatible = "pwm-vibrator";
pwms = <&pwm8 0 1000000000 0>,
<&pwm9 0 1000000000 0>;
pwm-names = "enable", "direction";
direction-duty-cycle-ns = <1000000000>;
};
};
...@@ -313,7 +313,7 @@ static void adi_close(struct input_dev *dev) ...@@ -313,7 +313,7 @@ static void adi_close(struct input_dev *dev)
static void adi_init_digital(struct gameport *gameport) static void adi_init_digital(struct gameport *gameport)
{ {
int seq[] = { 4, -2, -3, 10, -6, -11, -7, -9, 11, 0 }; static const int seq[] = { 4, -2, -3, 10, -6, -11, -7, -9, 11, 0 };
int i; int i;
for (i = 0; seq[i]; i++) { for (i = 0; seq[i]; i++) {
......
...@@ -1764,11 +1764,13 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id ...@@ -1764,11 +1764,13 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id
struct usb_endpoint_descriptor *ep = struct usb_endpoint_descriptor *ep =
&intf->cur_altsetting->endpoint[i].desc; &intf->cur_altsetting->endpoint[i].desc;
if (usb_endpoint_xfer_int(ep)) {
if (usb_endpoint_dir_in(ep)) if (usb_endpoint_dir_in(ep))
ep_irq_in = ep; ep_irq_in = ep;
else else
ep_irq_out = ep; ep_irq_out = ep;
} }
}
if (!ep_irq_in || !ep_irq_out) { if (!ep_irq_in || !ep_irq_out) {
error = -ENODEV; error = -ENODEV;
......
...@@ -581,6 +581,18 @@ config INPUT_PWM_BEEPER ...@@ -581,6 +581,18 @@ config INPUT_PWM_BEEPER
To compile this driver as a module, choose M here: the module will be To compile this driver as a module, choose M here: the module will be
called pwm-beeper. called pwm-beeper.
config INPUT_PWM_VIBRA
tristate "PWM vibrator support"
depends on PWM
select INPUT_FF_MEMLESS
help
Say Y here to get support for PWM based vibrator devices.
If unsure, say N.
To compile this driver as a module, choose M here: the module will be
called pwm-vibra.
config INPUT_RK805_PWRKEY config INPUT_RK805_PWRKEY
tristate "Rockchip RK805 PMIC power key support" tristate "Rockchip RK805 PMIC power key support"
depends on MFD_RK808 depends on MFD_RK808
......
...@@ -59,6 +59,7 @@ obj-$(CONFIG_INPUT_PM8XXX_VIBRATOR) += pm8xxx-vibrator.o ...@@ -59,6 +59,7 @@ obj-$(CONFIG_INPUT_PM8XXX_VIBRATOR) += pm8xxx-vibrator.o
obj-$(CONFIG_INPUT_PMIC8XXX_PWRKEY) += pmic8xxx-pwrkey.o obj-$(CONFIG_INPUT_PMIC8XXX_PWRKEY) += pmic8xxx-pwrkey.o
obj-$(CONFIG_INPUT_POWERMATE) += powermate.o obj-$(CONFIG_INPUT_POWERMATE) += powermate.o
obj-$(CONFIG_INPUT_PWM_BEEPER) += pwm-beeper.o obj-$(CONFIG_INPUT_PWM_BEEPER) += pwm-beeper.o
obj-$(CONFIG_INPUT_PWM_VIBRA) += pwm-vibra.o
obj-$(CONFIG_INPUT_RB532_BUTTON) += rb532_button.o obj-$(CONFIG_INPUT_RB532_BUTTON) += rb532_button.o
obj-$(CONFIG_INPUT_REGULATOR_HAPTIC) += regulator-haptic.o obj-$(CONFIG_INPUT_REGULATOR_HAPTIC) += regulator-haptic.o
obj-$(CONFIG_INPUT_RETU_PWRBUTTON) += retu-pwrbutton.o obj-$(CONFIG_INPUT_RETU_PWRBUTTON) += retu-pwrbutton.o
......
/*
* PWM vibrator driver
*
* Copyright (C) 2017 Collabora Ltd.
*
* Based on previous work from:
* Copyright (C) 2012 Dmitry Torokhov <dmitry.torokhov@gmail.com>
*
* Based on PWM beeper driver:
* Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/input.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/property.h>
#include <linux/pwm.h>
#include <linux/regulator/consumer.h>
#include <linux/slab.h>
struct pwm_vibrator {
struct input_dev *input;
struct pwm_device *pwm;
struct pwm_device *pwm_dir;
struct regulator *vcc;
struct work_struct play_work;
u16 level;
u32 direction_duty_cycle;
};
static int pwm_vibrator_start(struct pwm_vibrator *vibrator)
{
struct device *pdev = vibrator->input->dev.parent;
struct pwm_state state;
int err;
err = regulator_enable(vibrator->vcc);
if (err) {
dev_err(pdev, "failed to enable regulator: %d", err);
return err;
}
pwm_get_state(vibrator->pwm, &state);
pwm_set_relative_duty_cycle(&state, vibrator->level, 0xffff);
state.enabled = true;
err = pwm_apply_state(vibrator->pwm, &state);
if (err) {
dev_err(pdev, "failed to apply pwm state: %d", err);
return err;
}
if (vibrator->pwm_dir) {
pwm_get_state(vibrator->pwm_dir, &state);
state.duty_cycle = vibrator->direction_duty_cycle;
state.enabled = true;
err = pwm_apply_state(vibrator->pwm_dir, &state);
if (err) {
dev_err(pdev, "failed to apply dir-pwm state: %d", err);
pwm_disable(vibrator->pwm);
return err;
}
}
return 0;
}
static void pwm_vibrator_stop(struct pwm_vibrator *vibrator)
{
regulator_disable(vibrator->vcc);
if (vibrator->pwm_dir)
pwm_disable(vibrator->pwm_dir);
pwm_disable(vibrator->pwm);
}
static void pwm_vibrator_play_work(struct work_struct *work)
{
struct pwm_vibrator *vibrator = container_of(work,
struct pwm_vibrator, play_work);
if (vibrator->level)
pwm_vibrator_start(vibrator);
else
pwm_vibrator_stop(vibrator);
}
static int pwm_vibrator_play_effect(struct input_dev *dev, void *data,
struct ff_effect *effect)
{
struct pwm_vibrator *vibrator = input_get_drvdata(dev);
vibrator->level = effect->u.rumble.strong_magnitude;
if (!vibrator->level)
vibrator->level = effect->u.rumble.weak_magnitude;
schedule_work(&vibrator->play_work);
return 0;
}
static void pwm_vibrator_close(struct input_dev *input)
{
struct pwm_vibrator *vibrator = input_get_drvdata(input);
cancel_work_sync(&vibrator->play_work);
pwm_vibrator_stop(vibrator);
}
static int pwm_vibrator_probe(struct platform_device *pdev)
{
struct pwm_vibrator *vibrator;
struct pwm_state state;
int err;
vibrator = devm_kzalloc(&pdev->dev, sizeof(*vibrator), GFP_KERNEL);
if (!vibrator)
return -ENOMEM;
vibrator->input = devm_input_allocate_device(&pdev->dev);
if (!vibrator->input)
return -ENOMEM;
vibrator->vcc = devm_regulator_get(&pdev->dev, "vcc");
err = PTR_ERR_OR_ZERO(vibrator->vcc);
if (err) {
if (err != -EPROBE_DEFER)
dev_err(&pdev->dev, "Failed to request regulator: %d",
err);
return err;
}
vibrator->pwm = devm_pwm_get(&pdev->dev, "enable");
err = PTR_ERR_OR_ZERO(vibrator->pwm);
if (err) {
if (err != -EPROBE_DEFER)
dev_err(&pdev->dev, "Failed to request main pwm: %d",
err);
return err;
}
INIT_WORK(&vibrator->play_work, pwm_vibrator_play_work);
/* Sync up PWM state and ensure it is off. */
pwm_init_state(vibrator->pwm, &state);
state.enabled = false;
err = pwm_apply_state(vibrator->pwm, &state);
if (err) {
dev_err(&pdev->dev, "failed to apply initial PWM state: %d",
err);
return err;
}
vibrator->pwm_dir = devm_pwm_get(&pdev->dev, "direction");
err = PTR_ERR_OR_ZERO(vibrator->pwm_dir);
switch (err) {
case 0:
/* Sync up PWM state and ensure it is off. */
pwm_init_state(vibrator->pwm_dir, &state);
state.enabled = false;
err = pwm_apply_state(vibrator->pwm_dir, &state);
if (err) {
dev_err(&pdev->dev, "failed to apply initial PWM state: %d",
err);
return err;
}
vibrator->direction_duty_cycle =
pwm_get_period(vibrator->pwm_dir) / 2;
device_property_read_u32(&pdev->dev, "direction-duty-cycle-ns",
&vibrator->direction_duty_cycle);
break;
case -ENODATA:
/* Direction PWM is optional */
vibrator->pwm_dir = NULL;
break;
default:
dev_err(&pdev->dev, "Failed to request direction pwm: %d", err);
/* Fall through */
case -EPROBE_DEFER:
return err;
}
vibrator->input->name = "pwm-vibrator";
vibrator->input->id.bustype = BUS_HOST;
vibrator->input->dev.parent = &pdev->dev;
vibrator->input->close = pwm_vibrator_close;
input_set_drvdata(vibrator->input, vibrator);
input_set_capability(vibrator->input, EV_FF, FF_RUMBLE);
err = input_ff_create_memless(vibrator->input, NULL,
pwm_vibrator_play_effect);
if (err) {
dev_err(&pdev->dev, "Couldn't create FF dev: %d", err);
return err;
}
err = input_register_device(vibrator->input);
if (err) {
dev_err(&pdev->dev, "Couldn't register input dev: %d", err);
return err;
}
platform_set_drvdata(pdev, vibrator);
return 0;
}
static int __maybe_unused pwm_vibrator_suspend(struct device *dev)
{
struct pwm_vibrator *vibrator = dev_get_drvdata(dev);
cancel_work_sync(&vibrator->play_work);
if (vibrator->level)
pwm_vibrator_stop(vibrator);
return 0;
}
static int __maybe_unused pwm_vibrator_resume(struct device *dev)
{
struct pwm_vibrator *vibrator = dev_get_drvdata(dev);
if (vibrator->level)
pwm_vibrator_start(vibrator);
return 0;
}
static SIMPLE_DEV_PM_OPS(pwm_vibrator_pm_ops,
pwm_vibrator_suspend, pwm_vibrator_resume);
#ifdef CONFIG_OF
static const struct of_device_id pwm_vibra_dt_match_table[] = {
{ .compatible = "pwm-vibrator" },
{},
};
MODULE_DEVICE_TABLE(of, pwm_vibra_dt_match_table);
#endif
static struct platform_driver pwm_vibrator_driver = {
.probe = pwm_vibrator_probe,
.driver = {
.name = "pwm-vibrator",
.pm = &pwm_vibrator_pm_ops,
.of_match_table = of_match_ptr(pwm_vibra_dt_match_table),
},
};
module_platform_driver(pwm_vibrator_driver);
MODULE_AUTHOR("Sebastian Reichel <sre@kernel.org>");
MODULE_DESCRIPTION("PWM vibrator driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:pwm-vibrator");
...@@ -700,7 +700,9 @@ static int elantech_debounce_check_v2(struct psmouse *psmouse) ...@@ -700,7 +700,9 @@ static int elantech_debounce_check_v2(struct psmouse *psmouse)
* When we encounter packet that matches this exactly, it means the * When we encounter packet that matches this exactly, it means the
* hardware is in debounce status. Just ignore the whole packet. * hardware is in debounce status. Just ignore the whole packet.
*/ */
const u8 debounce_packet[] = { 0x84, 0xff, 0xff, 0x02, 0xff, 0xff }; static const u8 debounce_packet[] = {
0x84, 0xff, 0xff, 0x02, 0xff, 0xff
};
unsigned char *packet = psmouse->packet; unsigned char *packet = psmouse->packet;
return !memcmp(packet, debounce_packet, sizeof(debounce_packet)); return !memcmp(packet, debounce_packet, sizeof(debounce_packet));
...@@ -741,7 +743,9 @@ static int elantech_packet_check_v2(struct psmouse *psmouse) ...@@ -741,7 +743,9 @@ static int elantech_packet_check_v2(struct psmouse *psmouse)
static int elantech_packet_check_v3(struct psmouse *psmouse) static int elantech_packet_check_v3(struct psmouse *psmouse)
{ {
struct elantech_data *etd = psmouse->private; struct elantech_data *etd = psmouse->private;
const u8 debounce_packet[] = { 0xc4, 0xff, 0xff, 0x02, 0xff, 0xff }; static const u8 debounce_packet[] = {
0xc4, 0xff, 0xff, 0x02, 0xff, 0xff
};
unsigned char *packet = psmouse->packet; unsigned char *packet = psmouse->packet;
/* /*
......
...@@ -839,6 +839,13 @@ static const struct dmi_system_id __initconst i8042_dmi_kbdreset_table[] = { ...@@ -839,6 +839,13 @@ static const struct dmi_system_id __initconst i8042_dmi_kbdreset_table[] = {
DMI_MATCH(DMI_PRODUCT_NAME, "P34"), DMI_MATCH(DMI_PRODUCT_NAME, "P34"),
}, },
}, },
{
/* Gigabyte P57 - Elantech touchpad */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "GIGABYTE"),
DMI_MATCH(DMI_PRODUCT_NAME, "P57"),
},
},
{ {
/* Schenker XMG C504 - Elantech touchpad */ /* Schenker XMG C504 - Elantech touchpad */
.matches = { .matches = {
......
...@@ -593,7 +593,7 @@ static int edt_ft5x06_work_mode(struct edt_ft5x06_ts_data *tsdata) ...@@ -593,7 +593,7 @@ static int edt_ft5x06_work_mode(struct edt_ft5x06_ts_data *tsdata)
tsdata->gain); tsdata->gain);
edt_ft5x06_register_write(tsdata, reg_addr->reg_offset, edt_ft5x06_register_write(tsdata, reg_addr->reg_offset,
tsdata->offset); tsdata->offset);
if (reg_addr->reg_report_rate) if (reg_addr->reg_report_rate != NO_REGISTER)
edt_ft5x06_register_write(tsdata, reg_addr->reg_report_rate, edt_ft5x06_register_write(tsdata, reg_addr->reg_report_rate,
tsdata->report_rate); tsdata->report_rate);
...@@ -874,6 +874,7 @@ edt_ft5x06_ts_set_regs(struct edt_ft5x06_ts_data *tsdata) ...@@ -874,6 +874,7 @@ edt_ft5x06_ts_set_regs(struct edt_ft5x06_ts_data *tsdata)
case M09: case M09:
reg_addr->reg_threshold = M09_REGISTER_THRESHOLD; reg_addr->reg_threshold = M09_REGISTER_THRESHOLD;
reg_addr->reg_report_rate = NO_REGISTER;
reg_addr->reg_gain = M09_REGISTER_GAIN; reg_addr->reg_gain = M09_REGISTER_GAIN;
reg_addr->reg_offset = M09_REGISTER_OFFSET; reg_addr->reg_offset = M09_REGISTER_OFFSET;
reg_addr->reg_num_x = M09_REGISTER_NUM_X; reg_addr->reg_num_x = M09_REGISTER_NUM_X;
......
...@@ -267,6 +267,12 @@ static void goodix_process_events(struct goodix_ts_data *ts) ...@@ -267,6 +267,12 @@ static void goodix_process_events(struct goodix_ts_data *ts)
if (touch_num < 0) if (touch_num < 0)
return; return;
/*
* Bit 4 of the first byte reports the status of the capacitive
* Windows/Home button.
*/
input_report_key(ts->input_dev, KEY_LEFTMETA, point_data[0] & BIT(4));
for (i = 0; i < touch_num; i++) for (i = 0; i < touch_num; i++)
goodix_ts_report_touch(ts, goodix_ts_report_touch(ts,
&point_data[1 + GOODIX_CONTACT_SIZE * i]); &point_data[1 + GOODIX_CONTACT_SIZE * i]);
...@@ -612,6 +618,9 @@ static int goodix_request_input_dev(struct goodix_ts_data *ts) ...@@ -612,6 +618,9 @@ static int goodix_request_input_dev(struct goodix_ts_data *ts)
ts->input_dev->id.product = ts->id; ts->input_dev->id.product = ts->id;
ts->input_dev->id.version = ts->version; ts->input_dev->id.version = ts->version;
/* Capacitive Windows/Home button on some devices */
input_set_capability(ts->input_dev, EV_KEY, KEY_LEFTMETA);
error = input_register_device(ts->input_dev); error = input_register_device(ts->input_dev);
if (error) { if (error) {
dev_err(&ts->client->dev, dev_err(&ts->client->dev,
......
...@@ -173,7 +173,7 @@ static void surface3_spi_process_pen(struct surface3_ts_data *ts_data, u8 *data) ...@@ -173,7 +173,7 @@ static void surface3_spi_process_pen(struct surface3_ts_data *ts_data, u8 *data)
static void surface3_spi_process(struct surface3_ts_data *ts_data) static void surface3_spi_process(struct surface3_ts_data *ts_data)
{ {
const char header[] = { static const char header[] = {
0xff, 0xff, 0xff, 0xff, 0xa5, 0x5a, 0xe7, 0x7e, 0x01 0xff, 0xff, 0xff, 0xff, 0xa5, 0x5a, 0xe7, 0x7e, 0x01
}; };
u8 *data = ts_data->rd_buf; u8 *data = ts_data->rd_buf;
......
...@@ -414,7 +414,7 @@ static int __maybe_unused ucb1400_ts_suspend(struct device *dev) ...@@ -414,7 +414,7 @@ static int __maybe_unused ucb1400_ts_suspend(struct device *dev)
mutex_lock(&idev->mutex); mutex_lock(&idev->mutex);
if (idev->users) if (idev->users)
ucb1400_ts_start(ucb); ucb1400_ts_stop(ucb);
mutex_unlock(&idev->mutex); mutex_unlock(&idev->mutex);
return 0; return 0;
...@@ -428,7 +428,7 @@ static int __maybe_unused ucb1400_ts_resume(struct device *dev) ...@@ -428,7 +428,7 @@ static int __maybe_unused ucb1400_ts_resume(struct device *dev)
mutex_lock(&idev->mutex); mutex_lock(&idev->mutex);
if (idev->users) if (idev->users)
ucb1400_ts_stop(ucb); ucb1400_ts_start(ucb);
mutex_unlock(&idev->mutex); mutex_unlock(&idev->mutex);
return 0; return 0;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment