Commit bc1287b9 authored by Andy Shevchenko's avatar Andy Shevchenko Committed by Jonathan Corbet

dmaengine: Make dmatest.rst indeed reST compatible

Make dmatest.rst indeed reST compatible.
Achieve this by fixing several formatting issues.
Signed-off-by: default avatarAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: default avatarJonathan Corbet <corbet@lwn.net>
parent a6cd7714
...@@ -15,6 +15,7 @@ Part 1 - How to build the test module ...@@ -15,6 +15,7 @@ Part 1 - How to build the test module
===================================== =====================================
The menuconfig contains an option that could be found by following path: The menuconfig contains an option that could be found by following path:
Device Drivers -> DMA Engine support -> DMA Test client Device Drivers -> DMA Engine support -> DMA Test client
In the configuration file the option called CONFIG_DMATEST. The dmatest could In the configuration file the option called CONFIG_DMATEST. The dmatest could
...@@ -23,11 +24,11 @@ be built as module or inside kernel. Let's consider those cases. ...@@ -23,11 +24,11 @@ be built as module or inside kernel. Let's consider those cases.
Part 2 - When dmatest is built as a module Part 2 - When dmatest is built as a module
========================================== ==========================================
Example of usage: :: Example of usage::
% modprobe dmatest channel=dma0chan0 timeout=2000 iterations=1 run=1 % modprobe dmatest channel=dma0chan0 timeout=2000 iterations=1 run=1
...or: :: ...or::
% modprobe dmatest % modprobe dmatest
% echo dma0chan0 > /sys/module/dmatest/parameters/channel % echo dma0chan0 > /sys/module/dmatest/parameters/channel
...@@ -35,14 +36,12 @@ Example of usage: :: ...@@ -35,14 +36,12 @@ Example of usage: ::
% echo 1 > /sys/module/dmatest/parameters/iterations % echo 1 > /sys/module/dmatest/parameters/iterations
% echo 1 > /sys/module/dmatest/parameters/run % echo 1 > /sys/module/dmatest/parameters/run
...or on the kernel command line: :: ...or on the kernel command line::
dmatest.channel=dma0chan0 dmatest.timeout=2000 dmatest.iterations=1 dmatest.run=1 dmatest.channel=dma0chan0 dmatest.timeout=2000 dmatest.iterations=1 dmatest.run=1
..hint:: available channel list could be extracted by running the following .. hint::
command: available channel list could be extracted by running the following command::
::
% ls -1 /sys/class/dma/ % ls -1 /sys/class/dma/
...@@ -64,12 +63,12 @@ before returning. For example, the following scripts wait for 42 tests ...@@ -64,12 +63,12 @@ before returning. For example, the following scripts wait for 42 tests
to complete before exiting. Note that if 'iterations' is set to 'infinite' then to complete before exiting. Note that if 'iterations' is set to 'infinite' then
waiting is disabled. waiting is disabled.
Example: :: Example::
% modprobe dmatest run=1 iterations=42 wait=1 % modprobe dmatest run=1 iterations=42 wait=1
% modprobe -r dmatest % modprobe -r dmatest
...or: :: ...or::
% modprobe dmatest run=1 iterations=42 % modprobe dmatest run=1 iterations=42
% cat /sys/module/dmatest/parameters/wait % cat /sys/module/dmatest/parameters/wait
...@@ -81,7 +80,7 @@ Part 3 - When built-in in the kernel ...@@ -81,7 +80,7 @@ Part 3 - When built-in in the kernel
The module parameters that is supplied to the kernel command line will be used The module parameters that is supplied to the kernel command line will be used
for the first performed test. After user gets a control, the test could be for the first performed test. After user gets a control, the test could be
re-run with the same or different parameters. For the details see the above re-run with the same or different parameters. For the details see the above
section "Part 2 - When dmatest is built as a module..." section `Part 2 - When dmatest is built as a module`_.
In both cases the module parameters are used as the actual values for the test In both cases the module parameters are used as the actual values for the test
case. You always could check them at run-time by running :: case. You always could check them at run-time by running ::
...@@ -91,12 +90,11 @@ case. You always could check them at run-time by running :: ...@@ -91,12 +90,11 @@ case. You always could check them at run-time by running ::
Part 4 - Gathering the test results Part 4 - Gathering the test results
=================================== ===================================
Test results are printed to the kernel log buffer with the format: :: Test results are printed to the kernel log buffer with the format::
"dmatest: result <channel>: <test id>: '<error msg>' with src_off=<val> dst_off=<val> len=<val> (<err code>)" "dmatest: result <channel>: <test id>: '<error msg>' with src_off=<val> dst_off=<val> len=<val> (<err code>)"
Example of output: :: Example of output::
% dmesg | tail -n 1 % dmesg | tail -n 1
dmatest: result dma0chan0-copy0: #1: No errors with src_off=0x7bf dst_off=0x8ad len=0x3fea (0) dmatest: result dma0chan0-copy0: #1: No errors with src_off=0x7bf dst_off=0x8ad len=0x3fea (0)
...@@ -106,7 +104,7 @@ the parens represents additional information, e.g. error code, error counter, ...@@ -106,7 +104,7 @@ the parens represents additional information, e.g. error code, error counter,
or status. A test thread also emits a summary line at completion listing the or status. A test thread also emits a summary line at completion listing the
number of tests executed, number that failed, and a result code. number of tests executed, number that failed, and a result code.
Example: :: Example::
% dmesg | tail -n 1 % dmesg | tail -n 1
dmatest: dma0chan0-copy0: summary 1 test, 0 failures 1000 iops 100000 KB/s (0) dmatest: dma0chan0-copy0: summary 1 test, 0 failures 1000 iops 100000 KB/s (0)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment