Commit bc628fd1 authored by Mattias Nilsson's avatar Mattias Nilsson Committed by Samuel Ortiz

mfd: Make use of the ab8500 firmware read-modify-write service

This patch updates the AB8500 driver to make use of the I2C
read-modify-write service in the PRCMU firmware.
Signed-off-by: default avatarMattias Nilsson <mattias.i.nilsson@stericsson.com>
Reviewed-by: default avatarMattias Wallin <mattias.wallin@stericsson.com>
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: default avatarSamuel Ortiz <sameo@linux.intel.com>
parent 3c3e4898
......@@ -201,13 +201,15 @@ static int mask_and_set_register_interruptible(struct ab8500 *ab8500, u8 bank,
u8 reg, u8 bitmask, u8 bitvalues)
{
int ret;
u8 data;
/* put the u8 bank and u8 reg together into a an u16.
* bank on higher 8 bits and reg in lower */
u16 addr = ((u16)bank) << 8 | reg;
mutex_lock(&ab8500->lock);
if (ab8500->write_masked == NULL) {
u8 data;
ret = ab8500->read(ab8500, addr);
if (ret < 0) {
dev_err(ab8500->dev, "failed to read reg %#x: %d\n",
......@@ -223,7 +225,14 @@ static int mask_and_set_register_interruptible(struct ab8500 *ab8500, u8 bank,
dev_err(ab8500->dev, "failed to write reg %#x: %d\n",
addr, ret);
dev_vdbg(ab8500->dev, "mask: addr %#x => data %#x\n", addr, data);
dev_vdbg(ab8500->dev, "mask: addr %#x => data %#x\n", addr,
data);
goto out;
}
ret = ab8500->write_masked(ab8500, addr, bitmask, bitvalues);
if (ret < 0)
dev_err(ab8500->dev, "failed to modify reg %#x: %d\n", addr,
ret);
out:
mutex_unlock(&ab8500->lock);
return ret;
......
......@@ -11,7 +11,7 @@
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/mfd/abx500/ab8500.h>
#include <linux/mfd/db8500-prcmu.h>
#include <linux/mfd/dbx500-prcmu.h>
static int ab8500_i2c_write(struct ab8500 *ab8500, u16 addr, u8 data)
{
......@@ -23,6 +23,18 @@ static int ab8500_i2c_write(struct ab8500 *ab8500, u16 addr, u8 data)
return ret;
}
static int ab8500_i2c_write_masked(struct ab8500 *ab8500, u16 addr, u8 mask,
u8 data)
{
int ret;
ret = prcmu_abb_write_masked((u8)(addr >> 8), (u8)(addr & 0xFF), &data,
&mask, 1);
if (ret < 0)
dev_err(ab8500->dev, "prcmu i2c error %d\n", ret);
return ret;
}
static int ab8500_i2c_read(struct ab8500 *ab8500, u16 addr)
{
int ret;
......@@ -59,6 +71,7 @@ static int __devinit ab8500_i2c_probe(struct platform_device *plf)
ab8500->read = ab8500_i2c_read;
ab8500->write = ab8500_i2c_write;
ab8500->write_masked = ab8500_i2c_write_masked;
platform_set_drvdata(plf, ab8500);
......
......@@ -217,6 +217,7 @@ enum ab8500_version {
* @version: chip version id (e.g. ab8500 or ab9540)
* @chip_id: chip revision id
* @write: register write
* @write_masked: masked register write
* @read: register read
* @rx_buf: rx buf for SPI
* @tx_buf: tx buf for SPI
......@@ -236,8 +237,9 @@ struct ab8500 {
enum ab8500_version version;
u8 chip_id;
int (*write) (struct ab8500 *a8500, u16 addr, u8 data);
int (*read) (struct ab8500 *a8500, u16 addr);
int (*write)(struct ab8500 *ab8500, u16 addr, u8 data);
int (*write_masked)(struct ab8500 *ab8500, u16 addr, u8 mask, u8 data);
int (*read)(struct ab8500 *ab8500, u16 addr);
unsigned long tx_buf[4];
unsigned long rx_buf[4];
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment