Merge tag 'mfd-for-linus-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

Pull MFD updates from Lee Jones:
 "New Device Support:
   - Add support for 88pm860; 88pm80x
   - Add support for 24c08 EEPROM; at24
   - Add support for Broxton Whiskey Cove; intel*
   - Add support for RTS522A; rts5227
   - Add support for I2C devices; intel_quark_i2c_gpio

  New Functionality:
   - Add microphone support; arizona
   - Add general purpose switch support; arizona
   - Add fuel-gauge support; da9150-core
   - Add shutdown support; sec-core
   - Add charger support; tps65217
   - Add flexible serial communication unit support; atmel-flexcom
   - Add power button support; axp20x
   - Add led-flash support; rt5033

  Core Frameworks:
   - Supply a generic macro for defining Regmap IRQs
   - Rework ACPI child device matching

  Fix-ups:
   - Use Regmap to access registers; tps6105x
   - Use DEFINE_RES_IRQ_NAMED() macro; da9150
   - Re-arrange device registration order; intel_quark_i2c_gpio
   - Allow OF matching; cros_ec_i2c, atmel-hlcdc, hi6421-pmic, max8997, sm501
   - Handle deferred probe; twl6040
   - Improve accuracy of headphone detect; arizona
   - Unnecessary MODULE_ALIAS() removal; bcm590xx, rt5033
   - Remove unused code; htc-i2cpld, arizona, pcf50633-irq, sec-core
   - Simplify code; kempld, rts5209, da903x, lm3533, da9052, arizona
   - Remove #iffery; arizona
   - DT binding adaptions; many

  Bug Fixes:
   - Fix possible NULL pointer dereference; wm831x, tps6105x
   - Fix 64bit bug; intel_soc_pmic_bxtwc
   - Fix signedness issue; arizona"

* tag 'mfd-for-linus-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (73 commits)
  bindings: mfd: s2mps11: Add documentation for s2mps15 PMIC
  mfd: sec-core: Remove unused s2mpu02-rtc and s2mpu02-clk children
  extcon: arizona: Add extcon specific device tree binding document
  MAINTAINERS: Add binding docs for Cirrus Logic/Wolfson Arizona devices
  mfd: arizona: Remove bindings covered in new subsystem specific docs
  mfd: rt5033: Add RT5033 Flash led sub device
  mfd: lpss: Add Intel Broxton PCI IDs
  mfd: lpss: Add Broxton ACPI IDs
  mfd: arizona: Signedness bug in arizona_runtime_suspend()
  mfd: axp20x: Add a cell for the power button part of the, axp288 PMICs
  mfd: dt-bindings: Document pulled down WRSTBI pin on S2MPS1X
  mfd: sec-core: Disable buck voltage reset on watchdog falling edge
  mfd: sec-core: Dump PMIC revision to find out the HW
  mfd: arizona: Use correct type ID for device tree config
  mfd: arizona: Remove use of codec build config #ifdefs
  mfd: arizona: Simplify adding subdevices
  mfd: arizona: Downgrade type mismatch messages to dev_warn
  mfd: arizona: Factor out checking of jack detection state
  mfd: arizona: Factor out DCVDD isolation control
  mfd: Make TPS6105X select REGMAP_I2C
  ...

Documentation/acpi/enumeration.txt

@@ -347,13 +347,18 @@ For the first case, the MFD drivers do not need to do anything. The
 resulting child platform device will have its ACPI_COMPANION() set to point
 to the parent device.
 
-If the ACPI namespace has a device that we can match using an ACPI id,
-the id should be set like:
+If the ACPI namespace has a device that we can match using an ACPI id or ACPI
+adr, the cell should be set like:
+
+	static struct mfd_cell_acpi_match my_subdevice_cell_acpi_match = {
+		.pnpid = "XYZ0001",
+		.adr = 0,
+	};
 
 	static struct mfd_cell my_subdevice_cell = {
 		.name = "my_subdevice",
 		/* set the resources relative to the parent */
-		.acpi_pnpid = "XYZ0001",
+		.acpi_match = &my_subdevice_cell_acpi_match,
 	};
 
 The ACPI id "XYZ0001" is then used to lookup an ACPI device directly under

Documentation/devicetree/bindings/extcon/extcon-arizona.txt

+Cirrus Logic Arizona class audio SoCs
+
+These devices are audio SoCs with extensive digital capabilities and a range
+of analogue I/O.
+
+This document lists Extcon specific bindings, see the primary binding document:
+  ../mfd/arizona.txt
+
+Optional properties:
+
+  - wlf,hpdet-channel : Headphone detection channel.
+    ARIZONA_ACCDET_MODE_HPL or 1 - Headphone detect mode is set to HPDETL
+    ARIZONA_ACCDET_MODE_HPR or 2 - Headphone detect mode is set to HPDETR
+    If this node is not mentioned or if the value is unknown, then
+    headphone detection mode is set to HPDETL.

Documentation/devicetree/bindings/mfd/arizona.txt

@@ -44,7 +44,6 @@ Required properties:
 Optional properties:
 
   - wlf,reset : GPIO specifier for the GPIO controlling /RESET
-  - wlf,ldoena : GPIO specifier for the GPIO controlling LDOENA
 
   - wlf,gpio-defaults : A list of GPIO configuration register values. Defines
     for the appropriate values can found in <dt-bindings/mfd/arizona.txt>. If
@@ -67,21 +66,13 @@ Optional properties:
     present, the number of values should be less than or equal to the
     number of inputs, unspecified inputs will use the chip default.
 
-  - wlf,hpdet-channel : Headphone detection channel.
-    ARIZONA_ACCDET_MODE_HPL or 1 - Headphone detect mode is set to HPDETL
-    ARIZONA_ACCDET_MODE_HPR or 2 - Headphone detect mode is set to HPDETR
-    If this node is not mentioned or if the value is unknown, then
-    headphone detection mode is set to HPDETL.
-
   - DCVDD-supply, MICVDD-supply : Power supplies, only need to be specified if
     they are being externally supplied. As covered in
     Documentation/devicetree/bindings/regulator/regulator.txt
 
-Optional subnodes:
-  - ldo1 : Initial data for the LDO1 regulator, as covered in
-    Documentation/devicetree/bindings/regulator/regulator.txt
-  - micvdd : Initial data for the MICVDD regulator, as covered in
-    Documentation/devicetree/bindings/regulator/regulator.txt
+Also see child specific device properties:
+  Regulator - ../regulator/arizona-regulator.txt
+  Extcon    - ../extcon/extcon-arizona.txt
 
 Example:
 

Documentation/devicetree/bindings/mfd/atmel-flexcom.txt

+* Device tree bindings for Atmel Flexcom (Flexible Serial Communication Unit)
+
+The Atmel Flexcom is just a wrapper which embeds a SPI controller, an I2C
+controller and an USART. Only one function can be used at a time and is chosen
+at boot time according to the device tree.
+
+Required properties:
+- compatible:		Should be "atmel,sama5d2-flexcom"
+- reg:			Should be the offset/length value for Flexcom dedicated
+			I/O registers (without USART, TWI or SPI registers).
+- clocks:		Should be the Flexcom peripheral clock from PMC.
+- #address-cells:	Should be <1>
+- #size-cells:		Should be <1>
+- ranges:		Should be one range for the full I/O register region
+			(including USART, TWI and SPI registers).
+- atmel,flexcom-mode:	Should be one of the following values:
+			- <1> for USART
+			- <2> for SPI
+			- <3> for I2C
+
+Required child:
+A single available child device of type matching the "atmel,flexcom-mode"
+property.
+
+The phandle provided by the clocks property of the child is the same as one for
+the Flexcom parent.
+
+For other properties, please refer to the documentations of the respective
+device:
+- ../serial/atmel-usart.txt
+- ../spi/spi_atmel.txt
+- ../i2c/i2c-at91.txt
+
+Example:
+
+flexcom@f8034000 {
+	compatible = "atmel,sama5d2-flexcom";
+	reg = <0xf8034000 0x200>;
+	clocks = <&flx0_clk>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0x0 0xf8034000 0x800>;
+	atmel,flexcom-mode = <2>;
+
+	spi@400 {
+		compatible = "atmel,at91rm9200-spi";
+		reg = <0x400 0x200>;
+		interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flx0_default>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&flx0_clk>;
+		clock-names = "spi_clk";
+		atmel,fifo-size = <32>;
+
+		mtd_dataflash@0 {
+			compatible = "atmel,at25f512b";
+			reg = <0>;
+			spi-max-frequency = <20000000>;
+		};
+	};
+};

Documentation/devicetree/bindings/mfd/cros-ec.txt

@@ -34,6 +34,10 @@ Required properties (LPC):
 - compatible: "google,cros-ec-lpc"
 - reg: List of (IO address, size) pairs defining the interface uses
 
+Optional properties (all):
+- google,has-vbc-nvram: Some implementations of the EC include a small
+  nvram space used to store verified boot context data. This boolean flag
+  is used to specify whether this nvram is present or not.
 
 Example for I2C:
 

Documentation/devicetree/bindings/mfd/da9150.txt

@@ -6,6 +6,7 @@ Device			 Description
 ------			 -----------
 da9150-gpadc		: General Purpose ADC
 da9150-charger		: Battery Charger
+da9150-fg		: Battery Fuel-Gauge
 
 ======
 
@@ -16,13 +17,13 @@ Required properties:
   the IRQs from da9150 are delivered to.
 - interrupts: IRQ line info for da9150 chip.
 - interrupt-controller: da9150 has internal IRQs (own IRQ domain).
-  (See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt for
+  (See ../interrupt-controller/interrupts.txt for
    further information relating to interrupt properties)
 
 Sub-devices:
-- da9150-gpadc: See Documentation/devicetree/bindings/iio/adc/da9150-gpadc.txt
-- da9150-charger: See Documentation/devicetree/bindings/power/da9150-charger.txt
-
+- da9150-gpadc: See ../iio/adc/da9150-gpadc.txt
+- da9150-charger: See ../power/da9150-charger.txt
+- da9150-fg: See ../power/da9150-fg.txt
 
 Example:
 
@@ -34,10 +35,28 @@ Example:
 		interrupt-controller;
 
 		gpadc: da9150-gpadc {
-			...
+			compatible = "dlg,da9150-gpadc";
+			#io-channel-cells = <1>;
+		};
+
+		charger {
+			compatible = "dlg,da9150-charger";
+
+			io-channels = <&gpadc 0>,
+				      <&gpadc 2>,
+				      <&gpadc 8>,
+				      <&gpadc 5>;
+			io-channel-names = "CHAN_IBUS",
+					   "CHAN_VBUS",
+					   "CHAN_TJUNC",
+					   "CHAN_VBAT";
 		};
 
-		da9150-charger {
-			...
+		fuel-gauge {
+			compatible = "dlg,da9150-fuel-gauge";
+
+			dlg,update-interval = <10000>;
+			dlg,warn-soc-level = /bits/ 8 <15>;
+			dlg,crit-soc-level = /bits/ 8 <5>
 		};
 	};

Documentation/devicetree/bindings/mfd/s2mps11.txt

 
-* Samsung S2MPS11, S2MPS13, S2MPS14 and S2MPU02 Voltage and Current Regulator
+* Samsung S2MPS11/13/14/15 and S2MPU02 Voltage and Current Regulator
 
 The Samsung S2MPS11 is a multi-function device which includes voltage and
 current regulators, RTC, charger controller and other sub-blocks. It is
@@ -7,17 +7,24 @@ interfaced to the host controller using an I2C interface. Each sub-block is
 addressed by the host system using different I2C slave addresses.
 
 Required properties:
-- compatible: Should be "samsung,s2mps11-pmic" or "samsung,s2mps13-pmic"
-	      or "samsung,s2mps14-pmic" or "samsung,s2mpu02-pmic".
+- compatible: Should be one of the following
+	- "samsung,s2mps11-pmic"
+	- "samsung,s2mps13-pmic"
+	- "samsung,s2mps14-pmic"
+	- "samsung,s2mps15-pmic"
+	- "samsung,s2mpu02-pmic".
 - reg: Specifies the I2C slave address of the pmic block. It should be 0x66.
 
 Optional properties:
 - interrupt-parent: Specifies the phandle of the interrupt controller to which
   the interrupts from s2mps11 are delivered to.
 - interrupts: Interrupt specifiers for interrupt sources.
+- samsung,s2mps11-wrstbi-ground: Indicates that WRSTBI pin of PMIC is pulled
+  down. When the system is suspended it will always go down thus triggerring
+  unwanted buck warm reset (setting buck voltages to default values).
 
 Optional nodes:
-- clocks: s2mps11, s2mps13 and s5m8767 provide three(AP/CP/BT) buffered 32.768
+- clocks: s2mps11, s2mps13, s2mps15 and s5m8767 provide three(AP/CP/BT) buffered 32.768
   KHz outputs, so to register these as clocks with common clock framework
   instantiate a sub-node named "clocks". It uses the common clock binding
   documented in :
@@ -30,12 +37,13 @@ Optional nodes:
     the clock which they consume.
     Clock               ID           Devices
     ----------------------------------------------------------
-    32KhzAP		0            S2MPS11, S2MPS13, S2MPS14, S5M8767
-    32KhzCP		1            S2MPS11, S2MPS13, S5M8767
-    32KhzBT		2            S2MPS11, S2MPS13, S2MPS14, S5M8767
+    32KhzAP		0            S2MPS11, S2MPS13, S2MPS14, S2MPS15, S5M8767
+    32KhzCP		1            S2MPS11, S2MPS13, S2MPS15, S5M8767
+    32KhzBT		2            S2MPS11, S2MPS13, S2MPS14, S2MPS15, S5M8767
 
   - compatible: Should be one of: "samsung,s2mps11-clk", "samsung,s2mps13-clk",
 		"samsung,s2mps14-clk", "samsung,s5m8767-clk"
+    The s2msp15 uses the same compatible as s2mps13, as both provides similar clocks.
 
 - regulators: The regulators of s2mps11 that have to be instantiated should be
 included in a sub-node named 'regulators'. Regulator nodes included in this
@@ -83,6 +91,7 @@ as per the datasheet of s2mps11.
 			- S2MPS11: 1 to 38
 			- S2MPS13: 1 to 40
 			- S2MPS14: 1 to 25
+			- S2MPS15: 1 to 27
 			- S2MPU02: 1 to 28
 		  - Example: LDO1, LDO2, LDO28
 	- BUCKn
@@ -90,6 +99,7 @@ as per the datasheet of s2mps11.
 			- S2MPS11: 1 to 10
 			- S2MPS13: 1 to 10
 			- S2MPS14: 1 to 5
+			- S2MPS15: 1 to 10
 			- S2MPU02: 1 to 7
 		  - Example: BUCK1, BUCK2, BUCK9
 

Documentation/devicetree/bindings/power/da9150-fg.txt

+Dialog Semiconductor DA9150 Fuel-Gauge Power Supply bindings
+
+Required properties:
+- compatible: "dlg,da9150-fuel-gauge" for DA9150 Fuel-Gauge Power Supply
+
+Optional properties:
+- dlg,update-interval: Interval time (milliseconds) between battery level checks.
+- dlg,warn-soc-level: Battery discharge level (%) where warning event raised.
+      [1 - 100]
+- dlg,crit-soc-level: Battery discharge level (%) where critical event raised.
+  This value should be lower than the warning level.
+      [1 - 100]
+
+
+Example:
+
+	fuel-gauge {
+		compatible = "dlg,da9150-fuel-gauge";
+
+		dlg,update-interval = <10000>;
+		dlg,warn-soc-level = /bits/ 8 <15>;
+		dlg,crit-soc-level = /bits/ 8 <5>;
+	};

MAINTAINERS

@@ -7162,7 +7162,6 @@ F:	drivers/media/i2c/mt9v032.c
 F:	include/media/mt9v032.h
 
 MULTIFUNCTION DEVICES (MFD)
-M:	Samuel Ortiz <sameo@linux.intel.com>
 M:	Lee Jones <lee.jones@linaro.org>
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd.git
 S:	Supported
@@ -11567,6 +11566,9 @@ T:	git https://github.com/CirrusLogic/linux-drivers.git
 W:	https://github.com/CirrusLogic/linux-drivers/wiki
 S:	Supported
 F:	Documentation/hwmon/wm83??
+F:	Documentation/devicetree/bindings/extcon/extcon-arizona.txt
+F:	Documentation/devicetree/bindings/regulator/arizona-regulator.txt
+F:	Documentation/devicetree/bindings/mfd/arizona.txt
 F:	arch/arm/mach-s3c64xx/mach-crag6410*
 F:	drivers/clk/clk-wm83*.c
 F:	drivers/extcon/extcon-arizona.c

drivers/mfd/88pm80x.c

@@ -33,6 +33,8 @@ static struct pm80x_chip_mapping chip_mapping[] = {
 	{0x3,	CHIP_PM800},
 	/* 88PM805 chip id number */
 	{0x0,	CHIP_PM805},
+	/* 88PM860 chip id number */
+	{0x4,	CHIP_PM860},
 };
 
 /*

drivers/mfd/Kconfig

@@ -60,6 +60,17 @@ config MFD_AAT2870_CORE
 	  additional drivers must be enabled in order to use the
 	  functionality of the device.
 
+config MFD_ATMEL_FLEXCOM
+	tristate "Atmel Flexcom (Flexible Serial Communication Unit)"
+	select MFD_CORE
+	depends on OF
+	help
+	  Select this to get support for Atmel Flexcom. This is a wrapper
+	  which embeds a SPI controller, a I2C controller and a USART. Only
+	  one function can be used at a time. The choice is done at boot time
+	  by the probe function of this MFD driver according to a device tree
+	  property.
+
 config MFD_ATMEL_HLCDC
 	tristate "Atmel HLCDC (High-end LCD Controller)"
 	select MFD_CORE
@@ -725,9 +736,10 @@ config MFD_RTSX_PCI
 	select MFD_CORE
 	help
 	  This supports for Realtek PCI-Express card reader including rts5209,
-	  rts5229, rtl8411, etc. Realtek card reader supports access to many
-	  types of memory cards, such as Memory Stick, Memory Stick Pro,
-	  Secure Digital and MultiMediaCard.
+	  rts5227, rts522A, rts5229, rts5249, rts524A, rts525A, rtl8411, etc.
+	  Realtek card reader supports access to many types of memory cards,
+	  such as Memory Stick, Memory Stick Pro, Secure Digital and
+	  MultiMediaCard.
 
 config MFD_RT5033
 	tristate "Richtek RT5033 Power Management IC"
@@ -1059,6 +1071,7 @@ config MFD_PALMAS
 config TPS6105X
 	tristate "TI TPS61050/61052 Boost Converters"
 	depends on I2C
+	select REGMAP_I2C
 	select REGULATOR
 	select MFD_CORE
 	select REGULATOR_FIXED_VOLTAGE
@@ -1471,7 +1484,7 @@ config MFD_WM8994
 
 config MFD_STW481X
 	tristate "Support for ST Microelectronics STw481x"
-	depends on I2C && ARCH_NOMADIK
+	depends on I2C && (ARCH_NOMADIK || COMPILE_TEST)
 	select REGMAP_I2C
 	select MFD_CORE
 	help

drivers/mfd/Makefile

@@ -164,6 +164,7 @@ obj-$(CONFIG_MFD_SPMI_PMIC)	+= qcom-spmi-pmic.o
 obj-$(CONFIG_TPS65911_COMPARATOR)	+= tps65911-comparator.o
 obj-$(CONFIG_MFD_TPS65090)	+= tps65090.o
 obj-$(CONFIG_MFD_AAT2870_CORE)	+= aat2870-core.o
+obj-$(CONFIG_MFD_ATMEL_FLEXCOM)	+= atmel-flexcom.o
 obj-$(CONFIG_MFD_ATMEL_HLCDC)	+= atmel-hlcdc.o
 obj-$(CONFIG_MFD_INTEL_LPSS)	+= intel-lpss.o
 obj-$(CONFIG_MFD_INTEL_LPSS_PCI)	+= intel-lpss-pci.o
@@ -190,5 +191,6 @@ obj-$(CONFIG_MFD_RT5033)	+= rt5033.o
 obj-$(CONFIG_MFD_SKY81452)	+= sky81452.o
 
 intel-soc-pmic-objs		:= intel_soc_pmic_core.o intel_soc_pmic_crc.o
+intel-soc-pmic-$(CONFIG_INTEL_PMC_IPC)	+= intel_soc_pmic_bxtwc.o
 obj-$(CONFIG_INTEL_SOC_PMIC)	+= intel-soc-pmic.o
 obj-$(CONFIG_MFD_MT6397)	+= mt6397-core.o

drivers/mfd/arizona-core.c

@@ -24,6 +24,7 @@
 #include <linux/regulator/consumer.h>
 #include <linux/regulator/machine.h>
 #include <linux/slab.h>
+#include <linux/platform_device.h>
 
 #include <linux/mfd/arizona/core.h>
 #include <linux/mfd/arizona/registers.h>
@@ -69,8 +70,6 @@ EXPORT_SYMBOL_GPL(arizona_clk32k_enable);
 
 int arizona_clk32k_disable(struct arizona *arizona)
 {
-	int ret = 0;
-
 	mutex_lock(&arizona->clk_lock);
 
 	BUG_ON(arizona->clk32k_ref <= 0);
@@ -90,7 +89,7 @@ int arizona_clk32k_disable(struct arizona *arizona)
 
 	mutex_unlock(&arizona->clk_lock);
 
-	return ret;
+	return 0;
 }
 EXPORT_SYMBOL_GPL(arizona_clk32k_disable);
 
@@ -462,6 +461,50 @@ static int wm5102_clear_write_sequencer(struct arizona *arizona)
 }
 
 #ifdef CONFIG_PM
+static int arizona_isolate_dcvdd(struct arizona *arizona)
+{
+	int ret;
+
+	ret = regmap_update_bits(arizona->regmap,
+				 ARIZONA_ISOLATION_CONTROL,
+				 ARIZONA_ISOLATE_DCVDD1,
+				 ARIZONA_ISOLATE_DCVDD1);
+	if (ret != 0)
+		dev_err(arizona->dev, "Failed to isolate DCVDD: %d\n", ret);
+
+	return ret;
+}
+
+static int arizona_connect_dcvdd(struct arizona *arizona)
+{
+	int ret;
+
+	ret = regmap_update_bits(arizona->regmap,
+				 ARIZONA_ISOLATION_CONTROL,
+				 ARIZONA_ISOLATE_DCVDD1, 0);
+	if (ret != 0)
+		dev_err(arizona->dev, "Failed to connect DCVDD: %d\n", ret);
+
+	return ret;
+}
+
+static int arizona_is_jack_det_active(struct arizona *arizona)
+{
+	unsigned int val;
+	int ret;
+
+	ret = regmap_read(arizona->regmap, ARIZONA_JACK_DETECT_ANALOGUE, &val);
+	if (ret) {
+		dev_err(arizona->dev,
+			"Failed to check jack det status: %d\n", ret);
+		return ret;
+	} else if (val & ARIZONA_JD1_ENA) {
+		return 1;
+	} else {
+		return 0;
+	}
+}
+
 static int arizona_runtime_resume(struct device *dev)
 {
 	struct arizona *arizona = dev_get_drvdata(dev);
@@ -501,14 +544,9 @@ static int arizona_runtime_resume(struct device *dev)
 	switch (arizona->type) {
 	case WM5102:
 		if (arizona->external_dcvdd) {
-			ret = regmap_update_bits(arizona->regmap,
-						 ARIZONA_ISOLATION_CONTROL,
-						 ARIZONA_ISOLATE_DCVDD1, 0);
-			if (ret != 0) {
-				dev_err(arizona->dev,
-					"Failed to connect DCVDD: %d\n", ret);
+			ret = arizona_connect_dcvdd(arizona);
+			if (ret != 0)
 				goto err;
-			}
 		}
 
 		ret = wm5102_patch(arizona);
@@ -533,14 +571,9 @@ static int arizona_runtime_resume(struct device *dev)
 			goto err;
 
 		if (arizona->external_dcvdd) {
-			ret = regmap_update_bits(arizona->regmap,
-						 ARIZONA_ISOLATION_CONTROL,
-						 ARIZONA_ISOLATE_DCVDD1, 0);
-			if (ret) {
-				dev_err(arizona->dev,
-					"Failed to connect DCVDD: %d\n", ret);
+			ret = arizona_connect_dcvdd(arizona);
+			if (ret != 0)
 				goto err;
-			}
 		} else {
 			/*
 			 * As this is only called for the internal regulator
@@ -571,14 +604,9 @@ static int arizona_runtime_resume(struct device *dev)
 			goto err;
 
 		if (arizona->external_dcvdd) {
-			ret = regmap_update_bits(arizona->regmap,
-						 ARIZONA_ISOLATION_CONTROL,
-						 ARIZONA_ISOLATE_DCVDD1, 0);
-			if (ret != 0) {
-				dev_err(arizona->dev,
-					"Failed to connect DCVDD: %d\n", ret);
+			ret = arizona_connect_dcvdd(arizona);
+			if (ret != 0)
 				goto err;
-			}
 		}
 		break;
 	}
@@ -600,49 +628,50 @@ static int arizona_runtime_resume(struct device *dev)
 static int arizona_runtime_suspend(struct device *dev)
 {
 	struct arizona *arizona = dev_get_drvdata(dev);
-	unsigned int val;
+	int jd_active = 0;
 	int ret;
 
 	dev_dbg(arizona->dev, "Entering AoD mode\n");
 
-	ret = regmap_read(arizona->regmap, ARIZONA_JACK_DETECT_ANALOGUE, &val);
-	if (ret) {
-		dev_err(dev, "Failed to check jack det status: %d\n", ret);
-		return ret;
-	}
-
-	if (arizona->external_dcvdd) {
-		ret = regmap_update_bits(arizona->regmap,
-					 ARIZONA_ISOLATION_CONTROL,
-					 ARIZONA_ISOLATE_DCVDD1,
-					 ARIZONA_ISOLATE_DCVDD1);
-		if (ret != 0) {
-			dev_err(arizona->dev, "Failed to isolate DCVDD: %d\n",
-				ret);
-			return ret;
-		}
-	}
-
 	switch (arizona->type) {
 	case WM5110:
 	case WM8280:
-		if (arizona->external_dcvdd)
-			break;
+		jd_active = arizona_is_jack_det_active(arizona);
+		if (jd_active < 0)
+			return jd_active;
 
-		/*
-		 * As this is only called for the internal regulator
-		 * (where we know voltage ranges available) it is ok
-		 * to request an exact range.
-		 */
-		ret = regulator_set_voltage(arizona->dcvdd, 1175000, 1175000);
-		if (ret < 0) {
-			dev_err(arizona->dev,
-				"Failed to set suspend voltage: %d\n", ret);
-			return ret;
+		if (arizona->external_dcvdd) {
+			ret = arizona_isolate_dcvdd(arizona);
+			if (ret != 0)
+				return ret;
+		} else {
+			/*
+			 * As this is only called for the internal regulator
+			 * (where we know voltage ranges available) it is ok
+			 * to request an exact range.
+			 */
+			ret = regulator_set_voltage(arizona->dcvdd,
+						    1175000, 1175000);
+			if (ret < 0) {
+				dev_err(arizona->dev,
+					"Failed to set suspend voltage: %d\n",
+					ret);
+				return ret;
+			}
 		}
 		break;
 	case WM5102:
-		if (!(val & ARIZONA_JD1_ENA)) {
+		jd_active = arizona_is_jack_det_active(arizona);
+		if (jd_active < 0)
+			return jd_active;
+
+		if (arizona->external_dcvdd) {
+			ret = arizona_isolate_dcvdd(arizona);
+			if (ret != 0)
+				return ret;
+		}
+
+		if (!jd_active) {
 			ret = regmap_write(arizona->regmap,
 					   ARIZONA_WRITE_SEQUENCER_CTRL_3, 0x0);
 			if (ret) {
@@ -654,6 +683,15 @@ static int arizona_runtime_suspend(struct device *dev)
 		}
 		break;
 	default:
+		jd_active = arizona_is_jack_det_active(arizona);
+		if (jd_active < 0)
+			return jd_active;
+
+		if (arizona->external_dcvdd) {
+			ret = arizona_isolate_dcvdd(arizona);
+			if (ret != 0)
+				return ret;
+		}
 		break;
 	}
 
@@ -662,7 +700,7 @@ static int arizona_runtime_suspend(struct device *dev)
 	regulator_disable(arizona->dcvdd);
 
 	/* Allow us to completely power down if no jack detection */
-	if (!(val & ARIZONA_JD1_ENA)) {
+	if (!jd_active) {
 		dev_dbg(arizona->dev, "Fully powering off\n");
 
 		arizona->has_fully_powered_off = true;
@@ -928,7 +966,8 @@ int arizona_dev_init(struct arizona *arizona)
 	const char *type_name;
 	unsigned int reg, val, mask;
 	int (*apply_patch)(struct arizona *) = NULL;
-	int ret, i;
+	const struct mfd_cell *subdevs = NULL;
+	int n_subdevs, ret, i;
 
 	dev_set_drvdata(arizona->dev, arizona);
 	mutex_init(&arizona->clk_lock);
@@ -1089,74 +1128,95 @@ int arizona_dev_init(struct arizona *arizona)
 	arizona->rev &= ARIZONA_DEVICE_REVISION_MASK;
 
 	switch (reg) {
-#ifdef CONFIG_MFD_WM5102
 	case 0x5102:
-		type_name = "WM5102";
-		if (arizona->type != WM5102) {
-			dev_err(arizona->dev, "WM5102 registered as %d\n",
-				arizona->type);
-			arizona->type = WM5102;
+		if (IS_ENABLED(CONFIG_MFD_WM5102)) {
+			type_name = "WM5102";
+			if (arizona->type != WM5102) {
+				dev_warn(arizona->dev,
+					 "WM5102 registered as %d\n",
+					 arizona->type);
+				arizona->type = WM5102;
+			}
+
+			apply_patch = wm5102_patch;
+			arizona->rev &= 0x7;
+			subdevs = wm5102_devs;
+			n_subdevs = ARRAY_SIZE(wm5102_devs);
 		}
-		apply_patch = wm5102_patch;
-		arizona->rev &= 0x7;
 		break;
-#endif
-#ifdef CONFIG_MFD_WM5110
 	case 0x5110:
-		switch (arizona->type) {
-		case WM5110:
-			type_name = "WM5110";
-			break;
-		case WM8280:
-			type_name = "WM8280";
-			break;
-		default:
-			type_name = "WM5110";
-			dev_err(arizona->dev, "WM5110 registered as %d\n",
-				arizona->type);
-			arizona->type = WM5110;
-			break;
+		if (IS_ENABLED(CONFIG_MFD_WM5110)) {
+			switch (arizona->type) {
+			case WM5110:
+				type_name = "WM5110";
+				break;
+			case WM8280:
+				type_name = "WM8280";
+				break;
+			default:
+				type_name = "WM5110";
+				dev_warn(arizona->dev,
+					 "WM5110 registered as %d\n",
+					 arizona->type);
+				arizona->type = WM5110;
+				break;
+			}
+
+			apply_patch = wm5110_patch;
+			subdevs = wm5110_devs;
+			n_subdevs = ARRAY_SIZE(wm5110_devs);
 		}
-		apply_patch = wm5110_patch;
 		break;
-#endif
-#ifdef CONFIG_MFD_WM8997
 	case 0x8997:
-		type_name = "WM8997";
-		if (arizona->type != WM8997) {
-			dev_err(arizona->dev, "WM8997 registered as %d\n",
-				arizona->type);
-			arizona->type = WM8997;
+		if (IS_ENABLED(CONFIG_MFD_WM8997)) {
+			type_name = "WM8997";
+			if (arizona->type != WM8997) {
+				dev_warn(arizona->dev,
+					 "WM8997 registered as %d\n",
+					 arizona->type);
+				arizona->type = WM8997;
+			}
+
+			apply_patch = wm8997_patch;
+			subdevs = wm8997_devs;
+			n_subdevs = ARRAY_SIZE(wm8997_devs);
 		}
-		apply_patch = wm8997_patch;
 		break;
-#endif
-#ifdef CONFIG_MFD_WM8998
 	case 0x6349:
-		switch (arizona->type) {
-		case WM8998:
-			type_name = "WM8998";
-			break;
-
-		case WM1814:
-			type_name = "WM1814";
-			break;
+		if (IS_ENABLED(CONFIG_MFD_WM8998)) {
+			switch (arizona->type) {
+			case WM8998:
+				type_name = "WM8998";
+				break;
+
+			case WM1814:
+				type_name = "WM1814";
+				break;
+
+			default:
+				type_name = "WM8998";
+				dev_warn(arizona->dev,
+					 "WM8998 registered as %d\n",
+					 arizona->type);
+				arizona->type = WM8998;
+			}
 
-		default:
-			type_name = "WM8998";
-			dev_err(arizona->dev, "WM8998 registered as %d\n",
-				arizona->type);
-			arizona->type = WM8998;
+			apply_patch = wm8998_patch;
+			subdevs = wm8998_devs;
+			n_subdevs = ARRAY_SIZE(wm8998_devs);
 		}
-
-		apply_patch = wm8998_patch;
 		break;
-#endif
 	default:
 		dev_err(arizona->dev, "Unknown device ID %x\n", reg);
 		goto err_reset;
 	}
 
+	if (!subdevs) {
+		dev_err(arizona->dev,
+			"No kernel support for device ID %x\n", reg);
+		goto err_reset;
+	}
+
 	dev_info(dev, "%s revision %c\n", type_name, arizona->rev + 'A');
 
 	if (apply_patch) {
@@ -1342,28 +1402,10 @@ int arizona_dev_init(struct arizona *arizona)
 	arizona_request_irq(arizona, ARIZONA_IRQ_UNDERCLOCKED, "Underclocked",
 			    arizona_underclocked, arizona);
 
-	switch (arizona->type) {
-	case WM5102:
-		ret = mfd_add_devices(arizona->dev, -1, wm5102_devs,
-				      ARRAY_SIZE(wm5102_devs), NULL, 0, NULL);
-		break;
-	case WM5110:
-	case WM8280:
-		ret = mfd_add_devices(arizona->dev, -1, wm5110_devs,
-				      ARRAY_SIZE(wm5110_devs), NULL, 0, NULL);
-		break;
-	case WM8997:
-		ret = mfd_add_devices(arizona->dev, -1, wm8997_devs,
-				      ARRAY_SIZE(wm8997_devs), NULL, 0, NULL);
-		break;
-	case WM8998:
-	case WM1814:
-		ret = mfd_add_devices(arizona->dev, -1, wm8998_devs,
-				      ARRAY_SIZE(wm8998_devs), NULL, 0, NULL);
-		break;
-	}
+	ret = mfd_add_devices(arizona->dev, PLATFORM_DEVID_NONE,
+			      subdevs, n_subdevs, NULL, 0, NULL);
 
-	if (ret != 0) {
+	if (ret) {
 		dev_err(arizona->dev, "Failed to add subdevices: %d\n", ret);
 		goto err_irq;
 	}

drivers/mfd/arizona-i2c.c

@@ -27,7 +27,7 @@ static int arizona_i2c_probe(struct i2c_client *i2c,
 			     const struct i2c_device_id *id)
 {
 	struct arizona *arizona;
-	const struct regmap_config *regmap_config;
+	const struct regmap_config *regmap_config = NULL;
 	unsigned long type;
 	int ret;
 
@@ -37,31 +37,32 @@ static int arizona_i2c_probe(struct i2c_client *i2c,
 		type = id->driver_data;
 
 	switch (type) {
-#ifdef CONFIG_MFD_WM5102
 	case WM5102:
-		regmap_config = &wm5102_i2c_regmap;
+		if (IS_ENABLED(CONFIG_MFD_WM5102))
+			regmap_config = &wm5102_i2c_regmap;
 		break;
-#endif
-#ifdef CONFIG_MFD_WM5110
 	case WM5110:
 	case WM8280:
-		regmap_config = &wm5110_i2c_regmap;
+		if (IS_ENABLED(CONFIG_MFD_WM5110))
+			regmap_config = &wm5110_i2c_regmap;
 		break;
-#endif
-#ifdef CONFIG_MFD_WM8997
 	case WM8997:
-		regmap_config = &wm8997_i2c_regmap;
+		if (IS_ENABLED(CONFIG_MFD_WM8997))
+			regmap_config = &wm8997_i2c_regmap;
 		break;
-#endif
-#ifdef CONFIG_MFD_WM8998
 	case WM8998:
 	case WM1814:
-		regmap_config = &wm8998_i2c_regmap;
+		if (IS_ENABLED(CONFIG_MFD_WM8998))
+			regmap_config = &wm8998_i2c_regmap;
 		break;
-#endif
 	default:
-		dev_err(&i2c->dev, "Unknown device type %ld\n",
-			id->driver_data);
+		dev_err(&i2c->dev, "Unknown device type %ld\n", type);
+		return -EINVAL;
+	}
+
+	if (!regmap_config) {
+		dev_err(&i2c->dev,
+			"No kernel support for device type %ld\n", type);
 		return -EINVAL;
 	}
 
@@ -77,7 +78,7 @@ static int arizona_i2c_probe(struct i2c_client *i2c,
 		return ret;
 	}
 
-	arizona->type = id->driver_data;
+	arizona->type = type;
 	arizona->dev = &i2c->dev;
 	arizona->irq = i2c->irq;
 

drivers/mfd/arizona-irq.c

@@ -169,7 +169,7 @@ static struct irq_chip arizona_irq_chip = {
 static int arizona_irq_map(struct irq_domain *h, unsigned int virq,
 			      irq_hw_number_t hw)
 {
-	struct regmap_irq_chip_data *data = h->host_data;
+	struct arizona *data = h->host_data;
 
 	irq_set_chip_data(virq, data);
 	irq_set_chip_and_handler(virq, &arizona_irq_chip, handle_simple_irq);

drivers/mfd/arizona-spi.c

@@ -27,7 +27,7 @@ static int arizona_spi_probe(struct spi_device *spi)
 {
 	const struct spi_device_id *id = spi_get_device_id(spi);
 	struct arizona *arizona;
-	const struct regmap_config *regmap_config;
+	const struct regmap_config *regmap_config = NULL;
 	unsigned long type;
 	int ret;
 
@@ -37,20 +37,23 @@ static int arizona_spi_probe(struct spi_device *spi)
 		type = id->driver_data;
 
 	switch (type) {
-#ifdef CONFIG_MFD_WM5102
 	case WM5102:
-		regmap_config = &wm5102_spi_regmap;
+		if (IS_ENABLED(CONFIG_MFD_WM5102))
+			regmap_config = &wm5102_spi_regmap;
 		break;
-#endif
-#ifdef CONFIG_MFD_WM5110
 	case WM5110:
 	case WM8280:
-		regmap_config = &wm5110_spi_regmap;
+		if (IS_ENABLED(CONFIG_MFD_WM5110))
+			regmap_config = &wm5110_spi_regmap;
 		break;
-#endif
 	default:
-		dev_err(&spi->dev, "Unknown device type %ld\n",
-			id->driver_data);
+		dev_err(&spi->dev, "Unknown device type %ld\n", type);
+		return -EINVAL;
+	}
+
+	if (!regmap_config) {
+		dev_err(&spi->dev,
+			"No kernel support for device type %ld\n", type);
 		return -EINVAL;
 	}
 
@@ -66,7 +69,7 @@ static int arizona_spi_probe(struct spi_device *spi)
 		return ret;
 	}
 
-	arizona->type = id->driver_data;
+	arizona->type = type;
 	arizona->dev = &spi->dev;
 	arizona->irq = spi->irq;
 

drivers/mfd/atmel-flexcom.c

+/*
+ * Driver for Atmel Flexcom
+ *
+ * Copyright (C) 2015 Atmel Corporation
+ *
+ * Author: Cyrille Pitchen <cyrille.pitchen@atmel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <dt-bindings/mfd/atmel-flexcom.h>
+
+/* I/O register offsets */
+#define FLEX_MR		0x0	/* Mode Register */
+#define FLEX_VERSION	0xfc	/* Version Register */
+
+/* Mode Register bit fields */
+#define FLEX_MR_OPMODE_OFFSET	(0)  /* Operating Mode */
+#define FLEX_MR_OPMODE_MASK	(0x3 << FLEX_MR_OPMODE_OFFSET)
+#define FLEX_MR_OPMODE(opmode)	(((opmode) << FLEX_MR_OPMODE_OFFSET) &	\
+				 FLEX_MR_OPMODE_MASK)
+
+
+static int atmel_flexcom_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct clk *clk;
+	struct resource *res;
+	void __iomem *base;
+	u32 opmode;
+	int err;
+
+	err = of_property_read_u32(np, "atmel,flexcom-mode", &opmode);
+	if (err)
+		return err;
+
+	if (opmode < ATMEL_FLEXCOM_MODE_USART ||
+	    opmode > ATMEL_FLEXCOM_MODE_TWI)
+		return -EINVAL;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(clk))
+		return PTR_ERR(clk);
+
+	err = clk_prepare_enable(clk);
+	if (err)
+		return err;
+
+	/*
+	 * Set the Operating Mode in the Mode Register: only the selected device
+	 * is clocked. Hence, registers of the other serial devices remain
+	 * inaccessible and are read as zero. Also the external I/O lines of the
+	 * Flexcom are muxed to reach the selected device.
+	 */
+	writel(FLEX_MR_OPMODE(opmode), base + FLEX_MR);
+
+	clk_disable_unprepare(clk);
+
+	return of_platform_populate(np, NULL, NULL, &pdev->dev);
+}
+
+static const struct of_device_id atmel_flexcom_of_match[] = {
+	{ .compatible = "atmel,sama5d2-flexcom" },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, atmel_flexcom_of_match);
+
+static struct platform_driver atmel_flexcom_driver = {
+	.probe	= atmel_flexcom_probe,
+	.driver	= {
+		.name		= "atmel_flexcom",
+		.of_match_table	= atmel_flexcom_of_match,
+	},
+};
+
+module_platform_driver(atmel_flexcom_driver);
+
+MODULE_AUTHOR("Cyrille Pitchen <cyrille.pitchen@atmel.com>");
+MODULE_DESCRIPTION("Atmel Flexcom MFD driver");
+MODULE_LICENSE("GPL v2");

drivers/mfd/atmel-hlcdc.c

@@ -148,6 +148,7 @@ static const struct of_device_id atmel_hlcdc_match[] = {
 	{ .compatible = "atmel,sama5d4-hlcdc" },
 	{ /* sentinel */ },
 };
+MODULE_DEVICE_TABLE(of, atmel_hlcdc_match);
 
 static struct platform_driver atmel_hlcdc_driver = {
 	.probe = atmel_hlcdc_probe,

drivers/mfd/axp20x.c

@@ -161,6 +161,21 @@ static struct resource axp22x_pek_resources[] = {
 	},
 };
 
+static struct resource axp288_power_button_resources[] = {
+	{
+		.name	= "PEK_DBR",
+		.start	= AXP288_IRQ_POKN,
+		.end	= AXP288_IRQ_POKN,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.name	= "PEK_DBF",
+		.start	= AXP288_IRQ_POKP,
+		.end	= AXP288_IRQ_POKP,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
 static struct resource axp288_fuel_gauge_resources[] = {
 	{
 		.start = AXP288_IRQ_QWBTU,
@@ -571,6 +586,11 @@ static struct mfd_cell axp288_cells[] = {
 		.num_resources = ARRAY_SIZE(axp288_fuel_gauge_resources),
 		.resources = axp288_fuel_gauge_resources,
 	},
+	{
+		.name = "axp20x-pek",
+		.num_resources = ARRAY_SIZE(axp288_power_button_resources),
+		.resources = axp288_power_button_resources,
+	},
 	{
 		.name = "axp288_pmic_acpi",
 	},

drivers/mfd/bcm590xx.c

@@ -128,4 +128,3 @@ module_i2c_driver(bcm590xx_i2c_driver);
 MODULE_AUTHOR("Matt Porter <mporter@linaro.org>");
 MODULE_DESCRIPTION("BCM590xx multi-function driver");
 MODULE_LICENSE("GPL v2");
-MODULE_ALIAS("i2c:bcm590xx");

drivers/mfd/cros_ec_i2c.c

@@ -344,6 +344,12 @@ static int cros_ec_i2c_resume(struct device *dev)
 static SIMPLE_DEV_PM_OPS(cros_ec_i2c_pm_ops, cros_ec_i2c_suspend,
 			  cros_ec_i2c_resume);
 
+static const struct of_device_id cros_ec_i2c_of_match[] = {
+	{ .compatible = "google,cros-ec-i2c", },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, cros_ec_i2c_of_match);
+
 static const struct i2c_device_id cros_ec_i2c_id[] = {
 	{ "cros-ec-i2c", 0 },
 	{ }
@@ -353,6 +359,7 @@ MODULE_DEVICE_TABLE(i2c, cros_ec_i2c_id);
 static struct i2c_driver cros_ec_driver = {
 	.driver	= {
 		.name	= "cros-ec-i2c",
+		.of_match_table = of_match_ptr(cros_ec_i2c_of_match),
 		.pm	= &cros_ec_i2c_pm_ops,
 	},
 	.probe		= cros_ec_i2c_probe,

drivers/mfd/da903x.c

@@ -532,11 +532,7 @@ static int da903x_probe(struct i2c_client *client,
 		return ret;
 	}
 
-	ret = da903x_add_subdevs(chip, pdata);
-	if (ret)
-		return ret;
-
-	return 0;
+	return da903x_add_subdevs(chip, pdata);
 }
 
 static int da903x_remove(struct i2c_client *client)

drivers/mfd/da9052-core.c

@@ -51,6 +51,9 @@ static bool da9052_reg_readable(struct device *dev, unsigned int reg)
 	case DA9052_GPIO_2_3_REG:
 	case DA9052_GPIO_4_5_REG:
 	case DA9052_GPIO_6_7_REG:
+	case DA9052_GPIO_8_9_REG:
+	case DA9052_GPIO_10_11_REG:
+	case DA9052_GPIO_12_13_REG:
 	case DA9052_GPIO_14_15_REG:
 	case DA9052_ID_0_1_REG:
 	case DA9052_ID_2_3_REG:
@@ -178,6 +181,9 @@ static bool da9052_reg_writeable(struct device *dev, unsigned int reg)
 	case DA9052_GPIO_2_3_REG:
 	case DA9052_GPIO_4_5_REG:
 	case DA9052_GPIO_6_7_REG:
+	case DA9052_GPIO_8_9_REG:
+	case DA9052_GPIO_10_11_REG:
+	case DA9052_GPIO_12_13_REG:
 	case DA9052_GPIO_14_15_REG:
 	case DA9052_ID_0_1_REG:
 	case DA9052_ID_2_3_REG:

drivers/mfd/da9052-i2c.c

@@ -174,11 +174,7 @@ static int da9052_i2c_probe(struct i2c_client *client,
 		return ret;
 	}
 
-	ret = da9052_device_init(da9052, id->driver_data);
-	if (ret != 0)
-		return ret;
-
-	return 0;
+	return da9052_device_init(da9052, id->driver_data);
 }
 
 static int da9052_i2c_remove(struct i2c_client *client)

drivers/mfd/da9052-spi.c

@@ -56,11 +56,7 @@ static int da9052_spi_probe(struct spi_device *spi)
 		return ret;
 	}
 
-	ret = da9052_device_init(da9052, id->driver_data);
-	if (ret != 0)
-		return ret;
-
-	return 0;
+	return da9052_device_init(da9052, id->driver_data);
 }
 
 static int da9052_spi_remove(struct spi_device *spi)

drivers/mfd/da9062-core.c

@@ -198,7 +198,7 @@ static int da9062_clear_fault_log(struct da9062 *chip)
 	return ret;
 }
 
-int get_device_type(struct da9062 *chip)
+static int da9062_get_device_type(struct da9062 *chip)
 {
 	int device_id, variant_id, variant_mrc;
 	int ret;
@@ -466,7 +466,7 @@ static int da9062_i2c_probe(struct i2c_client *i2c,
 	if (ret < 0)
 		dev_warn(chip->dev, "Cannot clear fault log\n");
 
-	ret = get_device_type(chip);
+	ret = da9062_get_device_type(chip);
 	if (ret)
 		return ret;
 

drivers/mfd/da9150-core.c

@@ -23,6 +23,77 @@
 #include <linux/mfd/da9150/core.h>
 #include <linux/mfd/da9150/registers.h>
 
+/* Raw device access, used for QIF */
+static int da9150_i2c_read_device(struct i2c_client *client, u8 addr, int count,
+				  u8 *buf)
+{
+	struct i2c_msg xfer;
+	int ret;
+
+	/*
+	 * Read is split into two transfers as device expects STOP/START rather
+	 * than repeated start to carry out this kind of access.
+	 */
+
+	/* Write address */
+	xfer.addr = client->addr;
+	xfer.flags = 0;
+	xfer.len = 1;
+	xfer.buf = &addr;
+
+	ret = i2c_transfer(client->adapter, &xfer, 1);
+	if (ret != 1) {
+		if (ret < 0)
+			return ret;
+		else
+			return -EIO;
+	}
+
+	/* Read data */
+	xfer.addr = client->addr;
+	xfer.flags = I2C_M_RD;
+	xfer.len = count;
+	xfer.buf = buf;
+
+	ret = i2c_transfer(client->adapter, &xfer, 1);
+	if (ret == 1)
+		return 0;
+	else if (ret < 0)
+		return ret;
+	else
+		return -EIO;
+}
+
+static int da9150_i2c_write_device(struct i2c_client *client, u8 addr,
+				   int count, const u8 *buf)
+{
+	struct i2c_msg xfer;
+	u8 *reg_data;
+	int ret;
+
+	reg_data = kzalloc(1 + count, GFP_KERNEL);
+	if (!reg_data)
+		return -ENOMEM;
+
+	reg_data[0] = addr;
+	memcpy(&reg_data[1], buf, count);
+
+	/* Write address & data */
+	xfer.addr = client->addr;
+	xfer.flags = 0;
+	xfer.len = 1 + count;
+	xfer.buf = reg_data;
+
+	ret = i2c_transfer(client->adapter, &xfer, 1);
+	kfree(reg_data);
+	if (ret == 1)
+		return 0;
+	else if (ret < 0)
+		return ret;
+	else
+		return -EIO;
+}
+
 static bool da9150_volatile_reg(struct device *dev, unsigned int reg)
 {
 	switch (reg) {
@@ -107,6 +178,28 @@ static const struct regmap_config da9150_regmap_config = {
 	.volatile_reg = da9150_volatile_reg,
 };
 
+void da9150_read_qif(struct da9150 *da9150, u8 addr, int count, u8 *buf)
+{
+	int ret;
+
+	ret = da9150_i2c_read_device(da9150->core_qif, addr, count, buf);
+	if (ret < 0)
+		dev_err(da9150->dev, "Failed to read from QIF 0x%x: %d\n",
+			addr, ret);
+}
+EXPORT_SYMBOL_GPL(da9150_read_qif);
+
+void da9150_write_qif(struct da9150 *da9150, u8 addr, int count, const u8 *buf)
+{
+	int ret;
+
+	ret = da9150_i2c_write_device(da9150->core_qif, addr, count, buf);
+	if (ret < 0)
+		dev_err(da9150->dev, "Failed to write to QIF 0x%x: %d\n",
+			addr, ret);
+}
+EXPORT_SYMBOL_GPL(da9150_write_qif);
+
 u8 da9150_reg_read(struct da9150 *da9150, u16 reg)
 {
 	int val, ret;
@@ -262,54 +355,45 @@ static const struct regmap_irq_chip da9150_regmap_irq_chip = {
 };
 
 static struct resource da9150_gpadc_resources[] = {
-	{
-		.name = "GPADC",
-		.start = DA9150_IRQ_GPADC,
-		.end = DA9150_IRQ_GPADC,
-		.flags = IORESOURCE_IRQ,
-	},
+	DEFINE_RES_IRQ_NAMED(DA9150_IRQ_GPADC, "GPADC"),
 };
 
 static struct resource da9150_charger_resources[] = {
-	{
-		.name = "CHG_STATUS",
-		.start = DA9150_IRQ_CHG,
-		.end = DA9150_IRQ_CHG,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.name = "CHG_TJUNC",
-		.start = DA9150_IRQ_TJUNC,
-		.end = DA9150_IRQ_TJUNC,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.name = "CHG_VFAULT",
-		.start = DA9150_IRQ_VFAULT,
-		.end = DA9150_IRQ_VFAULT,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.name = "CHG_VBUS",
-		.start = DA9150_IRQ_VBUS,
-		.end = DA9150_IRQ_VBUS,
-		.flags = IORESOURCE_IRQ,
-	},
+	DEFINE_RES_IRQ_NAMED(DA9150_IRQ_CHG, "CHG_STATUS"),
+	DEFINE_RES_IRQ_NAMED(DA9150_IRQ_TJUNC, "CHG_TJUNC"),
+	DEFINE_RES_IRQ_NAMED(DA9150_IRQ_VFAULT, "CHG_VFAULT"),
+	DEFINE_RES_IRQ_NAMED(DA9150_IRQ_VBUS, "CHG_VBUS"),
+};
+
+static struct resource da9150_fg_resources[] = {
+	DEFINE_RES_IRQ_NAMED(DA9150_IRQ_FG, "FG"),
+};
+
+enum da9150_dev_idx {
+	DA9150_GPADC_IDX = 0,
+	DA9150_CHARGER_IDX,
+	DA9150_FG_IDX,
 };
 
 static struct mfd_cell da9150_devs[] = {
-	{
+	[DA9150_GPADC_IDX] = {
 		.name = "da9150-gpadc",
 		.of_compatible = "dlg,da9150-gpadc",
 		.resources = da9150_gpadc_resources,
 		.num_resources = ARRAY_SIZE(da9150_gpadc_resources),
 	},
-	{
+	[DA9150_CHARGER_IDX] = {
 		.name = "da9150-charger",
 		.of_compatible = "dlg,da9150-charger",
 		.resources = da9150_charger_resources,
 		.num_resources = ARRAY_SIZE(da9150_charger_resources),
 	},
+	[DA9150_FG_IDX] = {
+		.name = "da9150-fuel-gauge",
+		.of_compatible = "dlg,da9150-fuel-gauge",
+		.resources = da9150_fg_resources,
+		.num_resources = ARRAY_SIZE(da9150_fg_resources),
+	},
 };
 
 static int da9150_probe(struct i2c_client *client,
@@ -317,6 +401,7 @@ static int da9150_probe(struct i2c_client *client,
 {
 	struct da9150 *da9150;
 	struct da9150_pdata *pdata = dev_get_platdata(&client->dev);
+	int qif_addr;
 	int ret;
 
 	da9150 = devm_kzalloc(&client->dev, sizeof(*da9150), GFP_KERNEL);
@@ -335,16 +420,41 @@ static int da9150_probe(struct i2c_client *client,
 		return ret;
 	}
 
-	da9150->irq_base = pdata ? pdata->irq_base : -1;
+	/* Setup secondary I2C interface for QIF access */
+	qif_addr = da9150_reg_read(da9150, DA9150_CORE2WIRE_CTRL_A);
+	qif_addr = (qif_addr & DA9150_CORE_BASE_ADDR_MASK) >> 1;
+	qif_addr |= DA9150_QIF_I2C_ADDR_LSB;
+	da9150->core_qif = i2c_new_dummy(client->adapter, qif_addr);
+	if (!da9150->core_qif) {
+		dev_err(da9150->dev, "Failed to attach QIF client\n");
+		return -ENODEV;
+	}
+
+	i2c_set_clientdata(da9150->core_qif, da9150);
+
+	if (pdata) {
+		da9150->irq_base = pdata->irq_base;
+
+		da9150_devs[DA9150_FG_IDX].platform_data = pdata->fg_pdata;
+		da9150_devs[DA9150_FG_IDX].pdata_size =
+			sizeof(struct da9150_fg_pdata);
+	} else {
+		da9150->irq_base = -1;
+	}
 
 	ret = regmap_add_irq_chip(da9150->regmap, da9150->irq,
 				  IRQF_TRIGGER_LOW | IRQF_ONESHOT,
 				  da9150->irq_base, &da9150_regmap_irq_chip,
 				  &da9150->regmap_irq_data);
-	if (ret)
-		return ret;
+	if (ret) {
+		dev_err(da9150->dev, "Failed to add regmap irq chip: %d\n",
+			ret);
+		goto regmap_irq_fail;
+	}
+
 
 	da9150->irq_base = regmap_irq_chip_get_base(da9150->regmap_irq_data);
+
 	enable_irq_wake(da9150->irq);
 
 	ret = mfd_add_devices(da9150->dev, -1, da9150_devs,
@@ -352,11 +462,17 @@ static int da9150_probe(struct i2c_client *client,
 			      da9150->irq_base, NULL);
 	if (ret) {
 		dev_err(da9150->dev, "Failed to add child devices: %d\n", ret);
-		regmap_del_irq_chip(da9150->irq, da9150->regmap_irq_data);
-		return ret;
+		goto mfd_fail;
 	}
 
 	return 0;
+
+mfd_fail:
+	regmap_del_irq_chip(da9150->irq, da9150->regmap_irq_data);
+regmap_irq_fail:
+	i2c_unregister_device(da9150->core_qif);
+
+	return ret;
 }
 
 static int da9150_remove(struct i2c_client *client)
@@ -365,6 +481,7 @@ static int da9150_remove(struct i2c_client *client)
 
 	regmap_del_irq_chip(da9150->irq, da9150->regmap_irq_data);
 	mfd_remove_devices(da9150->dev);
+	i2c_unregister_device(da9150->core_qif);
 
 	return 0;
 }

drivers/mfd/hi6421-pmic-core.c

@@ -97,6 +97,7 @@ static const struct of_device_id of_hi6421_pmic_match_tbl[] = {
 	{ .compatible = "hisilicon,hi6421-pmic", },
 	{ },
 };
+MODULE_DEVICE_TABLE(of, of_hi6421_pmic_match_tbl);
 
 static struct platform_driver hi6421_pmic_driver = {
 	.driver = {

drivers/mfd/htc-i2cpld.c

@@ -318,7 +318,6 @@ static int htcpld_setup_chip_irq(
 	struct htcpld_data *htcpld;
 	struct htcpld_chip *chip;
 	unsigned int irq, irq_end;
-	int ret = 0;
 
 	/* Get the platform and driver data */
 	htcpld = platform_get_drvdata(pdev);
@@ -333,7 +332,7 @@ static int htcpld_setup_chip_irq(
 		irq_clear_status_flags(irq, IRQ_NOREQUEST | IRQ_NOPROBE);
 	}
 
-	return ret;
+	return 0;
 }
 
 static int htcpld_register_chip_i2c(

drivers/mfd/intel-lpss-acpi.c

@@ -25,10 +25,26 @@ static const struct intel_lpss_platform_info spt_info = {
 	.clk_rate = 120000000,
 };
 
+static const struct intel_lpss_platform_info bxt_info = {
+	.clk_rate = 100000000,
+};
+
+static const struct intel_lpss_platform_info bxt_i2c_info = {
+	.clk_rate = 133000000,
+};
+
 static const struct acpi_device_id intel_lpss_acpi_ids[] = {
 	/* SPT */
 	{ "INT3446", (kernel_ulong_t)&spt_info },
 	{ "INT3447", (kernel_ulong_t)&spt_info },
+	/* BXT */
+	{ "80860AAC", (kernel_ulong_t)&bxt_i2c_info },
+	{ "80860ABC", (kernel_ulong_t)&bxt_info },
+	{ "80860AC2", (kernel_ulong_t)&bxt_info },
+	/* APL */
+	{ "80865AAC", (kernel_ulong_t)&bxt_i2c_info },
+	{ "80865ABC", (kernel_ulong_t)&bxt_info },
+	{ "80865AC2", (kernel_ulong_t)&bxt_info },
 	{ }
 };
 MODULE_DEVICE_TABLE(acpi, intel_lpss_acpi_ids);

drivers/mfd/intel-lpss-pci.c

@@ -70,7 +70,52 @@ static const struct intel_lpss_platform_info spt_uart_info = {
 	.clk_con_id = "baudclk",
 };
 
+static const struct intel_lpss_platform_info bxt_info = {
+	.clk_rate = 100000000,
+};
+
+static const struct intel_lpss_platform_info bxt_uart_info = {
+	.clk_rate = 100000000,
+	.clk_con_id = "baudclk",
+};
+
+static const struct intel_lpss_platform_info bxt_i2c_info = {
+	.clk_rate = 133000000,
+};
+
 static const struct pci_device_id intel_lpss_pci_ids[] = {
+	/* BXT */
+	{ PCI_VDEVICE(INTEL, 0x0aac), (kernel_ulong_t)&bxt_i2c_info },
+	{ PCI_VDEVICE(INTEL, 0x0aae), (kernel_ulong_t)&bxt_i2c_info },
+	{ PCI_VDEVICE(INTEL, 0x0ab0), (kernel_ulong_t)&bxt_i2c_info },
+	{ PCI_VDEVICE(INTEL, 0x0ab2), (kernel_ulong_t)&bxt_i2c_info },
+	{ PCI_VDEVICE(INTEL, 0x0ab4), (kernel_ulong_t)&bxt_i2c_info },
+	{ PCI_VDEVICE(INTEL, 0x0ab6), (kernel_ulong_t)&bxt_i2c_info },
+	{ PCI_VDEVICE(INTEL, 0x0ab8), (kernel_ulong_t)&bxt_i2c_info },
+	{ PCI_VDEVICE(INTEL, 0x0aba), (kernel_ulong_t)&bxt_i2c_info },
+	{ PCI_VDEVICE(INTEL, 0x0abc), (kernel_ulong_t)&bxt_uart_info },
+	{ PCI_VDEVICE(INTEL, 0x0abe), (kernel_ulong_t)&bxt_uart_info },
+	{ PCI_VDEVICE(INTEL, 0x0ac0), (kernel_ulong_t)&bxt_uart_info },
+	{ PCI_VDEVICE(INTEL, 0x0ac2), (kernel_ulong_t)&bxt_info },
+	{ PCI_VDEVICE(INTEL, 0x0ac4), (kernel_ulong_t)&bxt_info },
+	{ PCI_VDEVICE(INTEL, 0x0ac6), (kernel_ulong_t)&bxt_info },
+	{ PCI_VDEVICE(INTEL, 0x0aee), (kernel_ulong_t)&bxt_uart_info },
+	/* APL */
+	{ PCI_VDEVICE(INTEL, 0x5aac), (kernel_ulong_t)&bxt_i2c_info },
+	{ PCI_VDEVICE(INTEL, 0x5aae), (kernel_ulong_t)&bxt_i2c_info },
+	{ PCI_VDEVICE(INTEL, 0x5ab0), (kernel_ulong_t)&bxt_i2c_info },
+	{ PCI_VDEVICE(INTEL, 0x5ab2), (kernel_ulong_t)&bxt_i2c_info },
+	{ PCI_VDEVICE(INTEL, 0x5ab4), (kernel_ulong_t)&bxt_i2c_info },
+	{ PCI_VDEVICE(INTEL, 0x5ab6), (kernel_ulong_t)&bxt_i2c_info },
+	{ PCI_VDEVICE(INTEL, 0x5ab8), (kernel_ulong_t)&bxt_i2c_info },
+	{ PCI_VDEVICE(INTEL, 0x5aba), (kernel_ulong_t)&bxt_i2c_info },
+	{ PCI_VDEVICE(INTEL, 0x5abc), (kernel_ulong_t)&bxt_uart_info },
+	{ PCI_VDEVICE(INTEL, 0x5abe), (kernel_ulong_t)&bxt_uart_info },
+	{ PCI_VDEVICE(INTEL, 0x5ac0), (kernel_ulong_t)&bxt_uart_info },
+	{ PCI_VDEVICE(INTEL, 0x5ac2), (kernel_ulong_t)&bxt_info },
+	{ PCI_VDEVICE(INTEL, 0x5ac4), (kernel_ulong_t)&bxt_info },
+	{ PCI_VDEVICE(INTEL, 0x5ac6), (kernel_ulong_t)&bxt_info },
+	{ PCI_VDEVICE(INTEL, 0x5aee), (kernel_ulong_t)&bxt_uart_info },
 	/* SPT-LP */
 	{ PCI_VDEVICE(INTEL, 0x9d27), (kernel_ulong_t)&spt_uart_info },
 	{ PCI_VDEVICE(INTEL, 0x9d28), (kernel_ulong_t)&spt_uart_info },

drivers/mfd/intel-lpss.c

@@ -26,6 +26,8 @@
 #include <linux/pm_runtime.h>
 #include <linux/seq_file.h>
 
+#include <asm-generic/io-64-nonatomic-lo-hi.h>
+
 #include "intel-lpss.h"
 
 #define LPSS_DEV_OFFSET		0x000
@@ -52,8 +54,7 @@
 #define LPSS_PRIV_SSP_REG		0x20
 #define LPSS_PRIV_SSP_REG_DIS_DMA_FIN	BIT(0)
 
-#define LPSS_PRIV_REMAP_ADDR_LO		0x40
-#define LPSS_PRIV_REMAP_ADDR_HI		0x44
+#define LPSS_PRIV_REMAP_ADDR		0x40
 
 #define LPSS_PRIV_CAPS			0xfc
 #define LPSS_PRIV_CAPS_NO_IDMA		BIT(8)
@@ -250,12 +251,7 @@ static void intel_lpss_set_remap_addr(const struct intel_lpss *lpss)
 {
 	resource_size_t addr = lpss->info->mem->start;
 
-	writel(addr, lpss->priv + LPSS_PRIV_REMAP_ADDR_LO);
-#if BITS_PER_LONG > 32
-	writel(addr >> 32, lpss->priv + LPSS_PRIV_REMAP_ADDR_HI);
-#else
-	writel(0, lpss->priv + LPSS_PRIV_REMAP_ADDR_HI);
-#endif
+	lo_hi_writeq(addr, lpss->priv + LPSS_PRIV_REMAP_ADDR);
 }
 
 static void intel_lpss_deassert_reset(const struct intel_lpss *lpss)

drivers/mfd/intel_quark_i2c_gpio.c

@@ -31,6 +31,10 @@
 #define MFD_I2C_BAR		0
 #define MFD_GPIO_BAR		1
 
+/* ACPI _ADR value to match the child node */
+#define MFD_ACPI_MATCH_GPIO	0ULL
+#define MFD_ACPI_MATCH_I2C	1ULL
+
 /* The base GPIO number under GPIOLIB framework */
 #define INTEL_QUARK_MFD_GPIO_BASE	8
 
@@ -82,27 +86,37 @@ static struct resource intel_quark_i2c_res[] = {
 	},
 };
 
+static struct mfd_cell_acpi_match intel_quark_acpi_match_i2c = {
+	.adr = MFD_ACPI_MATCH_I2C,
+};
+
 static struct resource intel_quark_gpio_res[] = {
 	[INTEL_QUARK_IORES_MEM] = {
 		.flags = IORESOURCE_MEM,
 	},
 };
 
+static struct mfd_cell_acpi_match intel_quark_acpi_match_gpio = {
+	.adr = MFD_ACPI_MATCH_GPIO,
+};
+
 static struct mfd_cell intel_quark_mfd_cells[] = {
-	{
-		.id = MFD_I2C_BAR,
-		.name = "i2c_designware",
-		.num_resources = ARRAY_SIZE(intel_quark_i2c_res),
-		.resources = intel_quark_i2c_res,
-		.ignore_resource_conflicts = true,
-	},
 	{
 		.id = MFD_GPIO_BAR,
 		.name = "gpio-dwapb",
+		.acpi_match = &intel_quark_acpi_match_gpio,
 		.num_resources = ARRAY_SIZE(intel_quark_gpio_res),
 		.resources = intel_quark_gpio_res,
 		.ignore_resource_conflicts = true,
 	},
+	{
+		.id = MFD_I2C_BAR,
+		.name = "i2c_designware",
+		.acpi_match = &intel_quark_acpi_match_i2c,
+		.num_resources = ARRAY_SIZE(intel_quark_i2c_res),
+		.resources = intel_quark_i2c_res,
+		.ignore_resource_conflicts = true,
+	},
 };
 
 static const struct pci_device_id intel_quark_mfd_ids[] = {
@@ -248,12 +262,11 @@ static int intel_quark_mfd_probe(struct pci_dev *pdev,
 
 	dev_set_drvdata(&pdev->dev, quark_mfd);
 
-	ret = intel_quark_i2c_setup(pdev, &intel_quark_mfd_cells[MFD_I2C_BAR]);
+	ret = intel_quark_i2c_setup(pdev, &intel_quark_mfd_cells[1]);
 	if (ret)
 		return ret;
 
-	ret = intel_quark_gpio_setup(pdev,
-				     &intel_quark_mfd_cells[MFD_GPIO_BAR]);
+	ret = intel_quark_gpio_setup(pdev, &intel_quark_mfd_cells[0]);
 	if (ret)
 		return ret;
 

drivers/mfd/intel_soc_pmic_bxtwc.c

+/*
+ * MFD core driver for Intel Broxton Whiskey Cove PMIC
+ *
+ * Copyright (C) 2015 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/module.h>
+#include <linux/acpi.h>
+#include <linux/err.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/intel_bxtwc.h>
+#include <asm/intel_pmc_ipc.h>
+
+/* PMIC device registers */
+#define REG_ADDR_MASK		0xFF00
+#define REG_ADDR_SHIFT		8
+#define REG_OFFSET_MASK		0xFF
+
+/* Interrupt Status Registers */
+#define BXTWC_IRQLVL1		0x4E02
+#define BXTWC_PWRBTNIRQ		0x4E03
+
+#define BXTWC_THRM0IRQ		0x4E04
+#define BXTWC_THRM1IRQ		0x4E05
+#define BXTWC_THRM2IRQ		0x4E06
+#define BXTWC_BCUIRQ		0x4E07
+#define BXTWC_ADCIRQ		0x4E08
+#define BXTWC_CHGR0IRQ		0x4E09
+#define BXTWC_CHGR1IRQ		0x4E0A
+#define BXTWC_GPIOIRQ0		0x4E0B
+#define BXTWC_GPIOIRQ1		0x4E0C
+#define BXTWC_CRITIRQ		0x4E0D
+
+/* Interrupt MASK Registers */
+#define BXTWC_MIRQLVL1		0x4E0E
+#define BXTWC_MPWRTNIRQ		0x4E0F
+
+#define BXTWC_MTHRM0IRQ		0x4E12
+#define BXTWC_MTHRM1IRQ		0x4E13
+#define BXTWC_MTHRM2IRQ		0x4E14
+#define BXTWC_MBCUIRQ		0x4E15
+#define BXTWC_MADCIRQ		0x4E16
+#define BXTWC_MCHGR0IRQ		0x4E17
+#define BXTWC_MCHGR1IRQ		0x4E18
+#define BXTWC_MGPIO0IRQ		0x4E19
+#define BXTWC_MGPIO1IRQ		0x4E1A
+#define BXTWC_MCRITIRQ		0x4E1B
+
+/* Whiskey Cove PMIC share same ACPI ID between different platforms */
+#define BROXTON_PMIC_WC_HRV	4
+
+/* Manage in two IRQ chips since mask registers are not consecutive */
+enum bxtwc_irqs {
+	/* Level 1 */
+	BXTWC_PWRBTN_LVL1_IRQ = 0,
+	BXTWC_TMU_LVL1_IRQ,
+	BXTWC_THRM_LVL1_IRQ,
+	BXTWC_BCU_LVL1_IRQ,
+	BXTWC_ADC_LVL1_IRQ,
+	BXTWC_CHGR_LVL1_IRQ,
+	BXTWC_GPIO_LVL1_IRQ,
+	BXTWC_CRIT_LVL1_IRQ,
+
+	/* Level 2 */
+	BXTWC_PWRBTN_IRQ,
+};
+
+enum bxtwc_irqs_level2 {
+	/* Level 2 */
+	BXTWC_THRM0_IRQ = 0,
+	BXTWC_THRM1_IRQ,
+	BXTWC_THRM2_IRQ,
+	BXTWC_BCU_IRQ,
+	BXTWC_ADC_IRQ,
+	BXTWC_CHGR0_IRQ,
+	BXTWC_CHGR1_IRQ,
+	BXTWC_GPIO0_IRQ,
+	BXTWC_GPIO1_IRQ,
+	BXTWC_CRIT_IRQ,
+};
+
+static const struct regmap_irq bxtwc_regmap_irqs[] = {
+	REGMAP_IRQ_REG(BXTWC_PWRBTN_LVL1_IRQ, 0, BIT(0)),
+	REGMAP_IRQ_REG(BXTWC_TMU_LVL1_IRQ, 0, BIT(1)),
+	REGMAP_IRQ_REG(BXTWC_THRM_LVL1_IRQ, 0, BIT(2)),
+	REGMAP_IRQ_REG(BXTWC_BCU_LVL1_IRQ, 0, BIT(3)),
+	REGMAP_IRQ_REG(BXTWC_ADC_LVL1_IRQ, 0, BIT(4)),
+	REGMAP_IRQ_REG(BXTWC_CHGR_LVL1_IRQ, 0, BIT(5)),
+	REGMAP_IRQ_REG(BXTWC_GPIO_LVL1_IRQ, 0, BIT(6)),
+	REGMAP_IRQ_REG(BXTWC_CRIT_LVL1_IRQ, 0, BIT(7)),
+	REGMAP_IRQ_REG(BXTWC_PWRBTN_IRQ, 1, 0x03),
+};
+
+static const struct regmap_irq bxtwc_regmap_irqs_level2[] = {
+	REGMAP_IRQ_REG(BXTWC_THRM0_IRQ, 0, 0xff),
+	REGMAP_IRQ_REG(BXTWC_THRM1_IRQ, 1, 0xbf),
+	REGMAP_IRQ_REG(BXTWC_THRM2_IRQ, 2, 0xff),
+	REGMAP_IRQ_REG(BXTWC_BCU_IRQ, 3, 0x1f),
+	REGMAP_IRQ_REG(BXTWC_ADC_IRQ, 4, 0xff),
+	REGMAP_IRQ_REG(BXTWC_CHGR0_IRQ, 5, 0x1f),
+	REGMAP_IRQ_REG(BXTWC_CHGR1_IRQ, 6, 0x1f),
+	REGMAP_IRQ_REG(BXTWC_GPIO0_IRQ, 7, 0xff),
+	REGMAP_IRQ_REG(BXTWC_GPIO1_IRQ, 8, 0x3f),
+	REGMAP_IRQ_REG(BXTWC_CRIT_IRQ, 9, 0x03),
+};
+
+static struct regmap_irq_chip bxtwc_regmap_irq_chip = {
+	.name = "bxtwc_irq_chip",
+	.status_base = BXTWC_IRQLVL1,
+	.mask_base = BXTWC_MIRQLVL1,
+	.irqs = bxtwc_regmap_irqs,
+	.num_irqs = ARRAY_SIZE(bxtwc_regmap_irqs),
+	.num_regs = 2,
+};
+
+static struct regmap_irq_chip bxtwc_regmap_irq_chip_level2 = {
+	.name = "bxtwc_irq_chip_level2",
+	.status_base = BXTWC_THRM0IRQ,
+	.mask_base = BXTWC_MTHRM0IRQ,
+	.irqs = bxtwc_regmap_irqs_level2,
+	.num_irqs = ARRAY_SIZE(bxtwc_regmap_irqs_level2),
+	.num_regs = 10,
+};
+
+static struct resource gpio_resources[] = {
+	DEFINE_RES_IRQ_NAMED(BXTWC_GPIO0_IRQ, "GPIO0"),
+	DEFINE_RES_IRQ_NAMED(BXTWC_GPIO1_IRQ, "GPIO1"),
+};
+
+static struct resource adc_resources[] = {
+	DEFINE_RES_IRQ_NAMED(BXTWC_ADC_IRQ, "ADC"),
+};
+
+static struct resource charger_resources[] = {
+	DEFINE_RES_IRQ_NAMED(BXTWC_CHGR0_IRQ, "CHARGER"),
+	DEFINE_RES_IRQ_NAMED(BXTWC_CHGR1_IRQ, "CHARGER1"),
+};
+
+static struct resource thermal_resources[] = {
+	DEFINE_RES_IRQ(BXTWC_THRM0_IRQ),
+	DEFINE_RES_IRQ(BXTWC_THRM1_IRQ),
+	DEFINE_RES_IRQ(BXTWC_THRM2_IRQ),
+};
+
+static struct resource bcu_resources[] = {
+	DEFINE_RES_IRQ_NAMED(BXTWC_BCU_IRQ, "BCU"),
+};
+
+static struct mfd_cell bxt_wc_dev[] = {
+	{
+		.name = "bxt_wcove_gpadc",
+		.num_resources = ARRAY_SIZE(adc_resources),
+		.resources = adc_resources,
+	},
+	{
+		.name = "bxt_wcove_thermal",
+		.num_resources = ARRAY_SIZE(thermal_resources),
+		.resources = thermal_resources,
+	},
+	{
+		.name = "bxt_wcove_ext_charger",
+		.num_resources = ARRAY_SIZE(charger_resources),
+		.resources = charger_resources,
+	},
+	{
+		.name = "bxt_wcove_bcu",
+		.num_resources = ARRAY_SIZE(bcu_resources),
+		.resources = bcu_resources,
+	},
+	{
+		.name = "bxt_wcove_gpio",
+		.num_resources = ARRAY_SIZE(gpio_resources),
+		.resources = gpio_resources,
+	},
+	{
+		.name = "bxt_wcove_region",
+	},
+};
+
+static int regmap_ipc_byte_reg_read(void *context, unsigned int reg,
+				    unsigned int *val)
+{
+	int ret;
+	int i2c_addr;
+	u8 ipc_in[2];
+	u8 ipc_out[4];
+	struct intel_soc_pmic *pmic = context;
+
+	if (reg & REG_ADDR_MASK)
+		i2c_addr = (reg & REG_ADDR_MASK) >> REG_ADDR_SHIFT;
+	else {
+		i2c_addr = BXTWC_DEVICE1_ADDR;
+		if (!i2c_addr) {
+			dev_err(pmic->dev, "I2C address not set\n");
+			return -EINVAL;
+		}
+	}
+	reg &= REG_OFFSET_MASK;
+
+	ipc_in[0] = reg;
+	ipc_in[1] = i2c_addr;
+	ret = intel_pmc_ipc_command(PMC_IPC_PMIC_ACCESS,
+			PMC_IPC_PMIC_ACCESS_READ,
+			ipc_in, sizeof(ipc_in), (u32 *)ipc_out, 1);
+	if (ret) {
+		dev_err(pmic->dev, "Failed to read from PMIC\n");
+		return ret;
+	}
+	*val = ipc_out[0];
+
+	return 0;
+}
+
+static int regmap_ipc_byte_reg_write(void *context, unsigned int reg,
+				       unsigned int val)
+{
+	int ret;
+	int i2c_addr;
+	u8 ipc_in[3];
+	struct intel_soc_pmic *pmic = context;
+
+	if (reg & REG_ADDR_MASK)
+		i2c_addr = (reg & REG_ADDR_MASK) >> REG_ADDR_SHIFT;
+	else {
+		i2c_addr = BXTWC_DEVICE1_ADDR;
+		if (!i2c_addr) {
+			dev_err(pmic->dev, "I2C address not set\n");
+			return -EINVAL;
+		}
+	}
+	reg &= REG_OFFSET_MASK;
+
+	ipc_in[0] = reg;
+	ipc_in[1] = i2c_addr;
+	ipc_in[2] = val;
+	ret = intel_pmc_ipc_command(PMC_IPC_PMIC_ACCESS,
+			PMC_IPC_PMIC_ACCESS_WRITE,
+			ipc_in, sizeof(ipc_in), NULL, 0);
+	if (ret) {
+		dev_err(pmic->dev, "Failed to write to PMIC\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+/* sysfs interfaces to r/w PMIC registers, required by initial script */
+static unsigned long bxtwc_reg_addr;
+static ssize_t bxtwc_reg_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	return sprintf(buf, "0x%lx\n", bxtwc_reg_addr);
+}
+
+static ssize_t bxtwc_reg_store(struct device *dev,
+	struct device_attribute *attr, const char *buf, size_t count)
+{
+	if (kstrtoul(buf, 0, &bxtwc_reg_addr)) {
+		dev_err(dev, "Invalid register address\n");
+		return -EINVAL;
+	}
+	return (ssize_t)count;
+}
+
+static ssize_t bxtwc_val_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	int ret;
+	unsigned int val;
+	struct intel_soc_pmic *pmic = dev_get_drvdata(dev);
+
+	ret = regmap_read(pmic->regmap, bxtwc_reg_addr, &val);
+	if (ret < 0) {
+		dev_err(dev, "Failed to read 0x%lx\n", bxtwc_reg_addr);
+		return -EIO;
+	}
+
+	return sprintf(buf, "0x%02x\n", val);
+}
+
+static ssize_t bxtwc_val_store(struct device *dev,
+	struct device_attribute *attr, const char *buf, size_t count)
+{
+	int ret;
+	unsigned int val;
+	struct intel_soc_pmic *pmic = dev_get_drvdata(dev);
+
+	ret = kstrtouint(buf, 0, &val);
+	if (ret)
+		return ret;
+
+	ret = regmap_write(pmic->regmap, bxtwc_reg_addr, val);
+	if (ret) {
+		dev_err(dev, "Failed to write value 0x%02x to address 0x%lx",
+			val, bxtwc_reg_addr);
+		return -EIO;
+	}
+	return count;
+}
+
+static DEVICE_ATTR(addr, S_IWUSR | S_IRUSR, bxtwc_reg_show, bxtwc_reg_store);
+static DEVICE_ATTR(val, S_IWUSR | S_IRUSR, bxtwc_val_show, bxtwc_val_store);
+static struct attribute *bxtwc_attrs[] = {
+	&dev_attr_addr.attr,
+	&dev_attr_val.attr,
+	NULL
+};
+
+static const struct attribute_group bxtwc_group = {
+	.attrs = bxtwc_attrs,
+};
+
+static const struct regmap_config bxtwc_regmap_config = {
+	.reg_bits = 16,
+	.val_bits = 8,
+	.reg_write = regmap_ipc_byte_reg_write,
+	.reg_read = regmap_ipc_byte_reg_read,
+};
+
+static int bxtwc_probe(struct platform_device *pdev)
+{
+	int ret;
+	acpi_handle handle;
+	acpi_status status;
+	unsigned long long hrv;
+	struct intel_soc_pmic *pmic;
+
+	handle = ACPI_HANDLE(&pdev->dev);
+	status = acpi_evaluate_integer(handle, "_HRV", NULL, &hrv);
+	if (ACPI_FAILURE(status)) {
+		dev_err(&pdev->dev, "Failed to get PMIC hardware revision\n");
+		return -ENODEV;
+	}
+	if (hrv != BROXTON_PMIC_WC_HRV) {
+		dev_err(&pdev->dev, "Invalid PMIC hardware revision: %llu\n",
+			hrv);
+		return -ENODEV;
+	}
+
+	pmic = devm_kzalloc(&pdev->dev, sizeof(*pmic), GFP_KERNEL);
+	if (!pmic)
+		return -ENOMEM;
+
+	ret = platform_get_irq(pdev, 0);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Invalid IRQ\n");
+		return ret;
+	}
+	pmic->irq = ret;
+
+	dev_set_drvdata(&pdev->dev, pmic);
+	pmic->dev = &pdev->dev;
+
+	pmic->regmap = devm_regmap_init(&pdev->dev, NULL, pmic,
+					&bxtwc_regmap_config);
+	if (IS_ERR(pmic->regmap)) {
+		ret = PTR_ERR(pmic->regmap);
+		dev_err(&pdev->dev, "Failed to initialise regmap: %d\n", ret);
+		return ret;
+	}
+
+	ret = regmap_add_irq_chip(pmic->regmap, pmic->irq,
+				  IRQF_ONESHOT | IRQF_SHARED,
+				  0, &bxtwc_regmap_irq_chip,
+				  &pmic->irq_chip_data);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to add IRQ chip\n");
+		return ret;
+	}
+
+	ret = regmap_add_irq_chip(pmic->regmap, pmic->irq,
+				  IRQF_ONESHOT | IRQF_SHARED,
+				  0, &bxtwc_regmap_irq_chip_level2,
+				  &pmic->irq_chip_data_level2);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to add secondary IRQ chip\n");
+		goto err_irq_chip_level2;
+	}
+
+	ret = mfd_add_devices(&pdev->dev, PLATFORM_DEVID_NONE, bxt_wc_dev,
+			      ARRAY_SIZE(bxt_wc_dev), NULL, 0,
+			      NULL);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to add devices\n");
+		goto err_mfd;
+	}
+
+	ret = sysfs_create_group(&pdev->dev.kobj, &bxtwc_group);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to create sysfs group %d\n", ret);
+		goto err_sysfs;
+	}
+
+	return 0;
+
+err_sysfs:
+	mfd_remove_devices(&pdev->dev);
+err_mfd:
+	regmap_del_irq_chip(pmic->irq, pmic->irq_chip_data_level2);
+err_irq_chip_level2:
+	regmap_del_irq_chip(pmic->irq, pmic->irq_chip_data);
+
+	return ret;
+}
+
+static int bxtwc_remove(struct platform_device *pdev)
+{
+	struct intel_soc_pmic *pmic = dev_get_drvdata(&pdev->dev);
+
+	sysfs_remove_group(&pdev->dev.kobj, &bxtwc_group);
+	mfd_remove_devices(&pdev->dev);
+	regmap_del_irq_chip(pmic->irq, pmic->irq_chip_data);
+	regmap_del_irq_chip(pmic->irq, pmic->irq_chip_data_level2);
+
+	return 0;
+}
+
+static void bxtwc_shutdown(struct platform_device *pdev)
+{
+	struct intel_soc_pmic *pmic = dev_get_drvdata(&pdev->dev);
+
+	disable_irq(pmic->irq);
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int bxtwc_suspend(struct device *dev)
+{
+	struct intel_soc_pmic *pmic = dev_get_drvdata(dev);
+
+	disable_irq(pmic->irq);
+
+	return 0;
+}
+
+static int bxtwc_resume(struct device *dev)
+{
+	struct intel_soc_pmic *pmic = dev_get_drvdata(dev);
+
+	enable_irq(pmic->irq);
+	return 0;
+}
+#endif
+static SIMPLE_DEV_PM_OPS(bxtwc_pm_ops, bxtwc_suspend, bxtwc_resume);
+
+static const struct acpi_device_id bxtwc_acpi_ids[] = {
+	{ "INT34D3", },
+	{ }
+};
+MODULE_DEVICE_TABLE(acpi, pmic_acpi_ids);
+
+static struct platform_driver bxtwc_driver = {
+	.probe = bxtwc_probe,
+	.remove	= bxtwc_remove,
+	.shutdown = bxtwc_shutdown,
+	.driver	= {
+		.name	= "BXTWC PMIC",
+		.pm     = &bxtwc_pm_ops,
+		.acpi_match_table = ACPI_PTR(bxtwc_acpi_ids),
+	},
+};
+
+module_platform_driver(bxtwc_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Qipeng Zha<qipeng.zha@intel.com>");

drivers/mfd/kempld-core.c

@@ -448,7 +448,6 @@ static int kempld_probe(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	struct kempld_device_data *pld;
 	struct resource *ioport;
-	int ret;
 
 	pld = devm_kzalloc(dev, sizeof(*pld), GFP_KERNEL);
 	if (!pld)
@@ -471,11 +470,7 @@ static int kempld_probe(struct platform_device *pdev)
 	mutex_init(&pld->lock);
 	platform_set_drvdata(pdev, pld);
 
-	ret = kempld_detect_device(pld);
-	if (ret)
-		return ret;
-
-	return 0;
+	return kempld_detect_device(pld);
 }
 
 static int kempld_remove(struct platform_device *pdev)
@@ -756,7 +751,6 @@ MODULE_DEVICE_TABLE(dmi, kempld_dmi_table);
 static int __init kempld_init(void)
 {
 	const struct dmi_system_id *id;
-	int ret;
 
 	if (force_device_id[0]) {
 		for (id = kempld_dmi_table;
@@ -771,11 +765,7 @@ static int __init kempld_init(void)
 			return -ENODEV;
 	}
 
-	ret = platform_driver_register(&kempld_driver);
-	if (ret)
-		return ret;
-
-	return 0;
+	return platform_driver_register(&kempld_driver);
 }
 
 static void __exit kempld_exit(void)

drivers/mfd/lm3533-core.c

@@ -472,11 +472,7 @@ static int lm3533_device_setup(struct lm3533 *lm3533,
 	if (ret)
 		return ret;
 
-	ret = lm3533_set_boost_ovp(lm3533, pdata->boost_ovp);
-	if (ret)
-		return ret;
-
-	return 0;
+	return lm3533_set_boost_ovp(lm3533, pdata->boost_ovp);
 }
 
 static int lm3533_device_init(struct lm3533 *lm3533)
@@ -596,7 +592,6 @@ static int lm3533_i2c_probe(struct i2c_client *i2c,
 					const struct i2c_device_id *id)
 {
 	struct lm3533 *lm3533;
-	int ret;
 
 	dev_dbg(&i2c->dev, "%s\n", __func__);
 
@@ -613,11 +608,7 @@ static int lm3533_i2c_probe(struct i2c_client *i2c,
 	lm3533->dev = &i2c->dev;
 	lm3533->irq = i2c->irq;
 
-	ret = lm3533_device_init(lm3533);
-	if (ret)
-		return ret;
-
-	return 0;
+	return lm3533_device_init(lm3533);
 }
 
 static int lm3533_i2c_remove(struct i2c_client *i2c)

drivers/mfd/lpc_ich.c

@@ -132,24 +132,18 @@ static struct resource gpio_ich_res[] = {
 	},
 };
 
-enum lpc_cells {
-	LPC_WDT = 0,
-	LPC_GPIO,
+static struct mfd_cell lpc_ich_wdt_cell = {
+	.name = "iTCO_wdt",
+	.num_resources = ARRAY_SIZE(wdt_ich_res),
+	.resources = wdt_ich_res,
+	.ignore_resource_conflicts = true,
 };
 
-static struct mfd_cell lpc_ich_cells[] = {
-	[LPC_WDT] = {
-		.name = "iTCO_wdt",
-		.num_resources = ARRAY_SIZE(wdt_ich_res),
-		.resources = wdt_ich_res,
-		.ignore_resource_conflicts = true,
-	},
-	[LPC_GPIO] = {
-		.name = "gpio_ich",
-		.num_resources = ARRAY_SIZE(gpio_ich_res),
-		.resources = gpio_ich_res,
-		.ignore_resource_conflicts = true,
-	},
+static struct mfd_cell lpc_ich_gpio_cell = {
+	.name = "gpio_ich",
+	.num_resources = ARRAY_SIZE(gpio_ich_res),
+	.resources = gpio_ich_res,
+	.ignore_resource_conflicts = true,
 };
 
 /* chipset related info */
@@ -841,7 +835,7 @@ static int lpc_ich_finalize_wdt_cell(struct pci_dev *dev)
 	struct itco_wdt_platform_data *pdata;
 	struct lpc_ich_priv *priv = pci_get_drvdata(dev);
 	struct lpc_ich_info *info;
-	struct mfd_cell *cell = &lpc_ich_cells[LPC_WDT];
+	struct mfd_cell *cell = &lpc_ich_wdt_cell;
 
 	pdata = devm_kzalloc(&dev->dev, sizeof(*pdata), GFP_KERNEL);
 	if (!pdata)
@@ -860,7 +854,7 @@ static int lpc_ich_finalize_wdt_cell(struct pci_dev *dev)
 static void lpc_ich_finalize_gpio_cell(struct pci_dev *dev)
 {
 	struct lpc_ich_priv *priv = pci_get_drvdata(dev);
-	struct mfd_cell *cell = &lpc_ich_cells[LPC_GPIO];
+	struct mfd_cell *cell = &lpc_ich_gpio_cell;
 
 	cell->platform_data = &lpc_chipset_info[priv->chipset];
 	cell->pdata_size = sizeof(struct lpc_ich_info);
@@ -904,7 +898,7 @@ static int lpc_ich_init_gpio(struct pci_dev *dev)
 	base_addr = base_addr_cfg & 0x0000ff80;
 	if (!base_addr) {
 		dev_notice(&dev->dev, "I/O space for ACPI uninitialized\n");
-		lpc_ich_cells[LPC_GPIO].num_resources--;
+		lpc_ich_gpio_cell.num_resources--;
 		goto gpe0_done;
 	}
 
@@ -918,7 +912,7 @@ static int lpc_ich_init_gpio(struct pci_dev *dev)
 		 * the platform_device subsystem doesn't see this resource
 		 * or it will register an invalid region.
 		 */
-		lpc_ich_cells[LPC_GPIO].num_resources--;
+		lpc_ich_gpio_cell.num_resources--;
 		acpi_conflict = true;
 	} else {
 		lpc_ich_enable_acpi_space(dev);
@@ -958,12 +952,12 @@ static int lpc_ich_init_gpio(struct pci_dev *dev)
 
 	lpc_ich_finalize_gpio_cell(dev);
 	ret = mfd_add_devices(&dev->dev, PLATFORM_DEVID_AUTO,
-			      &lpc_ich_cells[LPC_GPIO], 1, NULL, 0, NULL);
+			      &lpc_ich_gpio_cell, 1, NULL, 0, NULL);
 
 gpio_done:
 	if (acpi_conflict)
 		pr_warn("Resource conflict(s) found affecting %s\n",
-				lpc_ich_cells[LPC_GPIO].name);
+				lpc_ich_gpio_cell.name);
 	return ret;
 }
 
@@ -1007,7 +1001,7 @@ static int lpc_ich_init_wdt(struct pci_dev *dev)
 	 */
 	if (lpc_chipset_info[priv->chipset].iTCO_version == 1) {
 		/* Don't register iomem for TCO ver 1 */
-		lpc_ich_cells[LPC_WDT].num_resources--;
+		lpc_ich_wdt_cell.num_resources--;
 	} else if (lpc_chipset_info[priv->chipset].iTCO_version == 2) {
 		pci_read_config_dword(dev, RCBABASE, &base_addr_cfg);
 		base_addr = base_addr_cfg & 0xffffc000;
@@ -1035,7 +1029,7 @@ static int lpc_ich_init_wdt(struct pci_dev *dev)
 		goto wdt_done;
 
 	ret = mfd_add_devices(&dev->dev, PLATFORM_DEVID_AUTO,
-			      &lpc_ich_cells[LPC_WDT], 1, NULL, 0, NULL);
+			      &lpc_ich_wdt_cell, 1, NULL, 0, NULL);
 
 wdt_done:
 	return ret;

drivers/mfd/max8997.c

@@ -55,6 +55,7 @@ static const struct of_device_id max8997_pmic_dt_match[] = {
 	{ .compatible = "maxim,max8997-pmic", .data = (void *)TYPE_MAX8997 },
 	{},
 };
+MODULE_DEVICE_TABLE(of, max8997_pmic_dt_match);
 #endif
 
 int max8997_read_reg(struct i2c_client *i2c, u8 reg, u8 *dest)

drivers/mfd/mfd-core.c

@@ -82,29 +82,49 @@ static int mfd_platform_add_cell(struct platform_device *pdev,
 static void mfd_acpi_add_device(const struct mfd_cell *cell,
 				struct platform_device *pdev)
 {
-	struct acpi_device *parent_adev;
+	const struct mfd_cell_acpi_match *match = cell->acpi_match;
+	struct acpi_device *parent, *child;
 	struct acpi_device *adev;
 
-	parent_adev = ACPI_COMPANION(pdev->dev.parent);
-	if (!parent_adev)
+	parent = ACPI_COMPANION(pdev->dev.parent);
+	if (!parent)
 		return;
 
 	/*
-	 * MFD child device gets its ACPI handle either from the ACPI
-	 * device directly under the parent that matches the acpi_pnpid or
-	 * it will use the parent handle if is no acpi_pnpid is given.
+	 * MFD child device gets its ACPI handle either from the ACPI device
+	 * directly under the parent that matches the either _HID or _CID, or
+	 * _ADR or it will use the parent handle if is no ID is given.
+	 *
+	 * Note that use of _ADR is a grey area in the ACPI specification,
+	 * though Intel Galileo Gen2 is using it to distinguish the children
+	 * devices.
 	 */
-	adev = parent_adev;
-	if (cell->acpi_pnpid) {
-		struct acpi_device_id ids[2] = {};
-		struct acpi_device *child_adev;
-
-		strlcpy(ids[0].id, cell->acpi_pnpid, sizeof(ids[0].id));
-		list_for_each_entry(child_adev, &parent_adev->children, node)
-			if (acpi_match_device_ids(child_adev, ids)) {
-				adev = child_adev;
-				break;
+	adev = parent;
+	if (match) {
+		if (match->pnpid) {
+			struct acpi_device_id ids[2] = {};
+
+			strlcpy(ids[0].id, match->pnpid, sizeof(ids[0].id));
+			list_for_each_entry(child, &parent->children, node) {
+				if (acpi_match_device_ids(child, ids)) {
+					adev = child;
+					break;
+				}
+			}
+		} else {
+			unsigned long long adr;
+			acpi_status status;
+
+			list_for_each_entry(child, &parent->children, node) {
+				status = acpi_evaluate_integer(child->handle,
+							       "_ADR", NULL,
+							       &adr);
+				if (ACPI_SUCCESS(status) && match->adr == adr) {
+					adev = child;
+					break;
+				}
 			}
+		}
 	}
 
 	ACPI_COMPANION_SET(&pdev->dev, adev);

drivers/mfd/pcf50633-irq.c

@@ -55,7 +55,7 @@ EXPORT_SYMBOL_GPL(pcf50633_free_irq);
 static int __pcf50633_irq_mask_set(struct pcf50633 *pcf, int irq, u8 mask)
 {
 	u8 reg, bit;
-	int ret = 0, idx;
+	int idx;
 
 	idx = irq >> 3;
 	reg = PCF50633_REG_INT1M + idx;
@@ -72,7 +72,7 @@ static int __pcf50633_irq_mask_set(struct pcf50633 *pcf, int irq, u8 mask)
 
 	mutex_unlock(&pcf->lock);
 
-	return ret;
+	return 0;
 }
 
 int pcf50633_irq_mask(struct pcf50633 *pcf, int irq)

drivers/mfd/qcom_rpm.c

@@ -550,7 +550,7 @@ static int qcom_rpm_probe(struct platform_device *pdev)
 	ret = devm_request_irq(&pdev->dev,
 			       irq_ack,
 			       qcom_rpm_ack_interrupt,
-			       IRQF_TRIGGER_RISING | IRQF_NO_SUSPEND,
+			       IRQF_TRIGGER_RISING,
 			       "qcom_rpm_ack",
 			       rpm);
 	if (ret) {

drivers/mfd/rt5033.c

@@ -47,6 +47,9 @@ static const struct mfd_cell rt5033_devs[] = {
 	}, {
 		.name = "rt5033-battery",
 		.of_compatible = "richtek,rt5033-battery",
+	}, {
+		.name = "rt5033-led",
+		.of_compatible = "richtek,rt5033-led",
 	},
 };
 
@@ -137,7 +140,6 @@ static struct i2c_driver rt5033_driver = {
 };
 module_i2c_driver(rt5033_driver);
 
-MODULE_ALIAS("i2c:rt5033");
 MODULE_DESCRIPTION("Richtek RT5033 multi-function core driver");
 MODULE_AUTHOR("Beomho Seo <beomho.seo@samsung.com>");
 MODULE_LICENSE("GPL");

drivers/mfd/rts5209.c

@@ -138,11 +138,7 @@ static int rts5209_card_power_on(struct rtsx_pcr *pcr, int card)
 	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_PWR_CTL, pwr_mask, pwr_on);
 	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PWR_GATE_CTRL,
 			LDO3318_PWR_MASK, 0x00);
-	err = rtsx_pci_send_cmd(pcr, 100);
-	if (err < 0)
-		return err;
-
-	return 0;
+	return rtsx_pci_send_cmd(pcr, 100);
 }
 
 static int rts5209_card_power_off(struct rtsx_pcr *pcr, int card)

drivers/mfd/rts5227.c

@@ -26,6 +26,14 @@
 
 #include "rtsx_pcr.h"
 
+static u8 rts5227_get_ic_version(struct rtsx_pcr *pcr)
+{
+	u8 val;
+
+	rtsx_pci_read_register(pcr, DUMMY_REG_RESET_0, &val);
+	return val & 0x0F;
+}
+
 static void rts5227_fill_driving(struct rtsx_pcr *pcr, u8 voltage)
 {
 	u8 driving_3v3[4][3] = {
@@ -88,7 +96,7 @@ static void rts5227_force_power_down(struct rtsx_pcr *pcr, u8 pm_state)
 	rtsx_pci_write_register(pcr, AUTOLOAD_CFG_BASE + 3, 0x01, 0);
 
 	if (pm_state == HOST_ENTER_S3)
-		rtsx_pci_write_register(pcr, PM_CTRL3, 0x10, 0x10);
+		rtsx_pci_write_register(pcr, pcr->reg_pm_ctrl3, 0x10, 0x10);
 
 	rtsx_pci_write_register(pcr, FPDCTL, 0x03, 0x03);
 }
@@ -121,7 +129,7 @@ static int rts5227_extra_init_hw(struct rtsx_pcr *pcr)
 		rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PETXCFG, 0xB8, 0xB8);
 	else
 		rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PETXCFG, 0xB8, 0x88);
-	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PM_CTRL3, 0x10, 0x00);
+	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, pcr->reg_pm_ctrl3, 0x10, 0x00);
 
 	return rtsx_pci_send_cmd(pcr, 100);
 }
@@ -179,11 +187,7 @@ static int rts5227_card_power_on(struct rtsx_pcr *pcr, int card)
 			SD_POWER_MASK, SD_POWER_ON);
 	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PWR_GATE_CTRL,
 			LDO3318_PWR_MASK, 0x06);
-	err = rtsx_pci_send_cmd(pcr, 100);
-	if (err < 0)
-		return err;
-
-	return 0;
+	return rtsx_pci_send_cmd(pcr, 100);
 }
 
 static int rts5227_card_power_off(struct rtsx_pcr *pcr, int card)
@@ -298,8 +302,73 @@ void rts5227_init_params(struct rtsx_pcr *pcr)
 	pcr->tx_initial_phase = SET_CLOCK_PHASE(27, 27, 15);
 	pcr->rx_initial_phase = SET_CLOCK_PHASE(30, 7, 7);
 
+	pcr->ic_version = rts5227_get_ic_version(pcr);
 	pcr->sd_pull_ctl_enable_tbl = rts5227_sd_pull_ctl_enable_tbl;
 	pcr->sd_pull_ctl_disable_tbl = rts5227_sd_pull_ctl_disable_tbl;
 	pcr->ms_pull_ctl_enable_tbl = rts5227_ms_pull_ctl_enable_tbl;
 	pcr->ms_pull_ctl_disable_tbl = rts5227_ms_pull_ctl_disable_tbl;
+
+	pcr->reg_pm_ctrl3 = PM_CTRL3;
+}
+
+static int rts522a_optimize_phy(struct rtsx_pcr *pcr)
+{
+	int err;
+
+	err = rtsx_pci_write_register(pcr, RTS522A_PM_CTRL3, D3_DELINK_MODE_EN,
+		0x00);
+	if (err < 0)
+		return err;
+
+	if (is_version(pcr, 0x522A, IC_VER_A)) {
+		err = rtsx_pci_write_phy_register(pcr, PHY_RCR2,
+			PHY_RCR2_INIT_27S);
+		if (err)
+			return err;
+
+		rtsx_pci_write_phy_register(pcr, PHY_RCR1, PHY_RCR1_INIT_27S);
+		rtsx_pci_write_phy_register(pcr, PHY_FLD0, PHY_FLD0_INIT_27S);
+		rtsx_pci_write_phy_register(pcr, PHY_FLD3, PHY_FLD3_INIT_27S);
+		rtsx_pci_write_phy_register(pcr, PHY_FLD4, PHY_FLD4_INIT_27S);
+	}
+
+	return 0;
+}
+
+static int rts522a_extra_init_hw(struct rtsx_pcr *pcr)
+{
+	rts5227_extra_init_hw(pcr);
+
+	rtsx_pci_write_register(pcr, FUNC_FORCE_CTL, FUNC_FORCE_UPME_XMT_DBG,
+		FUNC_FORCE_UPME_XMT_DBG);
+	rtsx_pci_write_register(pcr, PCLK_CTL, 0x04, 0x04);
+	rtsx_pci_write_register(pcr, PM_EVENT_DEBUG, PME_DEBUG_0, PME_DEBUG_0);
+	rtsx_pci_write_register(pcr, PM_CLK_FORCE_CTL, 0xFF, 0x11);
+
+	return 0;
+}
+
+/* rts522a operations mainly derived from rts5227, except phy/hw init setting.
+ */
+static const struct pcr_ops rts522a_pcr_ops = {
+	.fetch_vendor_settings = rts5227_fetch_vendor_settings,
+	.extra_init_hw = rts522a_extra_init_hw,
+	.optimize_phy = rts522a_optimize_phy,
+	.turn_on_led = rts5227_turn_on_led,
+	.turn_off_led = rts5227_turn_off_led,
+	.enable_auto_blink = rts5227_enable_auto_blink,
+	.disable_auto_blink = rts5227_disable_auto_blink,
+	.card_power_on = rts5227_card_power_on,
+	.card_power_off = rts5227_card_power_off,
+	.switch_output_voltage = rts5227_switch_output_voltage,
+	.cd_deglitch = NULL,
+	.conv_clk_and_div_n = NULL,
+	.force_power_down = rts5227_force_power_down,
+};
+
+void rts522a_init_params(struct rtsx_pcr *pcr)
+{
+	rts5227_init_params(pcr);
+
+	pcr->reg_pm_ctrl3 = RTS522A_PM_CTRL3;
 }

drivers/mfd/rts5229.c

@@ -129,11 +129,7 @@ static int rts5229_card_power_on(struct rtsx_pcr *pcr, int card)
 			SD_POWER_MASK, SD_POWER_ON);
 	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PWR_GATE_CTRL,
 			LDO3318_PWR_MASK, 0x06);
-	err = rtsx_pci_send_cmd(pcr, 100);
-	if (err < 0)
-		return err;
-
-	return 0;
+	return rtsx_pci_send_cmd(pcr, 100);
 }
 
 static int rts5229_card_power_off(struct rtsx_pcr *pcr, int card)

drivers/mfd/rts5249.c

@@ -234,11 +234,7 @@ static int rtsx_base_card_power_on(struct rtsx_pcr *pcr, int card)
 			SD_POWER_MASK, SD_VCC_POWER_ON);
 	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PWR_GATE_CTRL,
 			LDO3318_PWR_MASK, 0x06);
-	err = rtsx_pci_send_cmd(pcr, 100);
-	if (err < 0)
-		return err;
-
-	return 0;
+	return rtsx_pci_send_cmd(pcr, 100);
 }
 
 static int rtsx_base_card_power_off(struct rtsx_pcr *pcr, int card)

drivers/mfd/rtsx_pcr.c

@@ -55,6 +55,7 @@ static const struct pci_device_id rtsx_pci_ids[] = {
 	{ PCI_DEVICE(0x10EC, 0x5229), PCI_CLASS_OTHERS << 16, 0xFF0000 },
 	{ PCI_DEVICE(0x10EC, 0x5289), PCI_CLASS_OTHERS << 16, 0xFF0000 },
 	{ PCI_DEVICE(0x10EC, 0x5227), PCI_CLASS_OTHERS << 16, 0xFF0000 },
+	{ PCI_DEVICE(0x10EC, 0x522A), PCI_CLASS_OTHERS << 16, 0xFF0000 },
 	{ PCI_DEVICE(0x10EC, 0x5249), PCI_CLASS_OTHERS << 16, 0xFF0000 },
 	{ PCI_DEVICE(0x10EC, 0x5287), PCI_CLASS_OTHERS << 16, 0xFF0000 },
 	{ PCI_DEVICE(0x10EC, 0x5286), PCI_CLASS_OTHERS << 16, 0xFF0000 },
@@ -571,11 +572,7 @@ static int rtsx_pci_set_pull_ctl(struct rtsx_pcr *pcr, const u32 *tbl)
 		tbl++;
 	}
 
-	err = rtsx_pci_send_cmd(pcr, 100);
-	if (err < 0)
-		return err;
-
-	return 0;
+	return rtsx_pci_send_cmd(pcr, 100);
 }
 
 int rtsx_pci_card_pull_ctl_enable(struct rtsx_pcr *pcr, int card)
@@ -1102,6 +1099,10 @@ static int rtsx_pci_init_chip(struct rtsx_pcr *pcr)
 		rts5227_init_params(pcr);
 		break;
 
+	case 0x522A:
+		rts522a_init_params(pcr);
+		break;
+
 	case 0x5249:
 		rts5249_init_params(pcr);
 		break;

drivers/mfd/rtsx_pcr.h

@@ -27,6 +27,8 @@
 #define MIN_DIV_N_PCR		80
 #define MAX_DIV_N_PCR		208
 
+#define RTS522A_PM_CTRL3		0xFF7E
+
 #define RTS524A_PME_FORCE_CTL		0xFF78
 #define RTS524A_PM_CTRL3		0xFF7E
 
@@ -38,6 +40,7 @@ void rts5229_init_params(struct rtsx_pcr *pcr);
 void rtl8411_init_params(struct rtsx_pcr *pcr);
 void rtl8402_init_params(struct rtsx_pcr *pcr);
 void rts5227_init_params(struct rtsx_pcr *pcr);
+void rts522a_init_params(struct rtsx_pcr *pcr);
 void rts5249_init_params(struct rtsx_pcr *pcr);
 void rts524a_init_params(struct rtsx_pcr *pcr);
 void rts525a_init_params(struct rtsx_pcr *pcr);

drivers/mfd/sec-core.c

@@ -103,12 +103,9 @@ static const struct mfd_cell s2mpa01_devs[] = {
 };
 
 static const struct mfd_cell s2mpu02_devs[] = {
-	{ .name = "s2mpu02-pmic", },
-	{ .name = "s2mpu02-rtc", },
 	{
-		.name = "s2mpu02-clk",
-		.of_compatible = "samsung,s2mpu02-clk",
-	}
+		.name = "s2mpu02-pmic",
+	},
 };
 
 #ifdef CONFIG_OF
@@ -253,6 +250,38 @@ static const struct regmap_config s5m8767_regmap_config = {
 	.cache_type = REGCACHE_FLAT,
 };
 
+static void sec_pmic_dump_rev(struct sec_pmic_dev *sec_pmic)
+{
+	unsigned int val;
+
+	/* For each device type, the REG_ID is always the first register */
+	if (!regmap_read(sec_pmic->regmap_pmic, S2MPS11_REG_ID, &val))
+		dev_dbg(sec_pmic->dev, "Revision: 0x%x\n", val);
+}
+
+static void sec_pmic_configure(struct sec_pmic_dev *sec_pmic)
+{
+	int err;
+
+	if (sec_pmic->device_type != S2MPS13X)
+		return;
+
+	if (sec_pmic->pdata->disable_wrstbi) {
+		/*
+		 * If WRSTBI pin is pulled down this feature must be disabled
+		 * because each Suspend to RAM will trigger buck voltage reset
+		 * to default values.
+		 */
+		err = regmap_update_bits(sec_pmic->regmap_pmic,
+					 S2MPS13_REG_WRSTBI,
+					 S2MPS13_REG_WRSTBI_MASK, 0x0);
+		if (err)
+			dev_warn(sec_pmic->dev,
+				 "Cannot initialize WRSTBI config: %d\n",
+				 err);
+	}
+}
+
 #ifdef CONFIG_OF
 /*
  * Only the common platform data elements for s5m8767 are parsed here from the
@@ -278,6 +307,10 @@ static struct sec_platform_data *sec_pmic_i2c_parse_dt_pdata(
 	 * not parsed here.
 	 */
 
+	pd->manual_poweroff = of_property_read_bool(dev->of_node,
+						"samsung,s2mps11-acokb-ground");
+	pd->disable_wrstbi = of_property_read_bool(dev->of_node,
+						"samsung,s2mps11-wrstbi-ground");
 	return pd;
 }
 #else
@@ -423,6 +456,8 @@ static int sec_pmic_probe(struct i2c_client *i2c,
 		goto err_mfd;
 
 	device_init_wakeup(sec_pmic->dev, sec_pmic->wakeup);
+	sec_pmic_configure(sec_pmic);
+	sec_pmic_dump_rev(sec_pmic);
 
 	return ret;
 
@@ -440,6 +475,33 @@ static int sec_pmic_remove(struct i2c_client *i2c)
 	return 0;
 }
 
+static void sec_pmic_shutdown(struct i2c_client *i2c)
+{
+	struct sec_pmic_dev *sec_pmic = i2c_get_clientdata(i2c);
+	unsigned int reg, mask;
+
+	if (!sec_pmic->pdata->manual_poweroff)
+		return;
+
+	switch (sec_pmic->device_type) {
+	case S2MPS11X:
+		reg = S2MPS11_REG_CTRL1;
+		mask = S2MPS11_CTRL1_PWRHOLD_MASK;
+		break;
+	default:
+		/*
+		 * Currently only one board with S2MPS11 needs this, so just
+		 * ignore the rest.
+		 */
+		dev_warn(sec_pmic->dev,
+			"Unsupported device %lu for manual power off\n",
+			sec_pmic->device_type);
+		return;
+	}
+
+	regmap_update_bits(sec_pmic->regmap_pmic, reg, mask, 0);
+}
+
 #ifdef CONFIG_PM_SLEEP
 static int sec_pmic_suspend(struct device *dev)
 {
@@ -491,6 +553,7 @@ static struct i2c_driver sec_pmic_driver = {
 	},
 	.probe = sec_pmic_probe,
 	.remove = sec_pmic_remove,
+	.shutdown = sec_pmic_shutdown,
 	.id_table = sec_pmic_id,
 };
 

drivers/mfd/sm501.c

@@ -1719,6 +1719,7 @@ static const struct of_device_id of_sm501_match_tbl[] = {
 	{ .compatible = "smi,sm501", },
 	{ /* end */ }
 };
+MODULE_DEVICE_TABLE(of, of_sm501_match_tbl);
 
 static struct platform_driver sm501_plat_driver = {
 	.driver		= {

drivers/mfd/stmpe.c

@@ -795,6 +795,7 @@ static int stmpe24xx_get_altfunc(struct stmpe *stmpe, enum stmpe_block block)
 		return 2;
 
 	case STMPE_BLOCK_KEYPAD:
+	case STMPE_BLOCK_PWM:
 		return 1;
 
 	case STMPE_BLOCK_GPIO:

drivers/mfd/tps6105x.c

@@ -64,27 +64,47 @@ static int tps6105x_startup(struct tps6105x *tps6105x)
 }
 
 /*
- * MFD cells - we have one cell which is selected operation
- * mode, and we always have a GPIO cell.
+ * MFD cells - we always have a GPIO cell and we have one cell
+ * which is selected operation mode.
  */
-static struct mfd_cell tps6105x_cells[] = {
-	{
-		/* name will be runtime assigned */
-		.id = -1,
-	},
-	{
-		.name = "tps6105x-gpio",
-		.id = -1,
-	},
+static struct mfd_cell tps6105x_gpio_cell = {
+	.name = "tps6105x-gpio",
+};
+
+static struct mfd_cell tps6105x_leds_cell = {
+	.name = "tps6105x-leds",
+};
+
+static struct mfd_cell tps6105x_flash_cell = {
+	.name = "tps6105x-flash",
 };
 
+static struct mfd_cell tps6105x_regulator_cell = {
+	.name = "tps6105x-regulator",
+};
+
+static int tps6105x_add_device(struct tps6105x *tps6105x,
+			       struct mfd_cell *cell)
+{
+	cell->platform_data = tps6105x;
+	cell->pdata_size = sizeof(*tps6105x);
+
+	return mfd_add_devices(&tps6105x->client->dev,
+			       PLATFORM_DEVID_AUTO, cell, 1, NULL, 0, NULL);
+}
+
 static int tps6105x_probe(struct i2c_client *client,
 			const struct i2c_device_id *id)
 {
 	struct tps6105x			*tps6105x;
 	struct tps6105x_platform_data	*pdata;
 	int ret;
-	int i;
+
+	pdata = dev_get_platdata(&client->dev);
+	if (!pdata) {
+		dev_err(&client->dev, "missing platform data\n");
+		return -ENODEV;
+	}
 
 	tps6105x = devm_kmalloc(&client->dev, sizeof(*tps6105x), GFP_KERNEL);
 	if (!tps6105x)
@@ -96,7 +116,6 @@ static int tps6105x_probe(struct i2c_client *client,
 
 	i2c_set_clientdata(client, tps6105x);
 	tps6105x->client = client;
-	pdata = dev_get_platdata(&client->dev);
 	tps6105x->pdata = pdata;
 
 	ret = tps6105x_startup(tps6105x);
@@ -105,38 +124,33 @@ static int tps6105x_probe(struct i2c_client *client,
 		return ret;
 	}
 
-	/* Remove warning texts when you implement new cell drivers */
+	ret = tps6105x_add_device(tps6105x, &tps6105x_gpio_cell);
+	if (ret)
+		return ret;
+
 	switch (pdata->mode) {
 	case TPS6105X_MODE_SHUTDOWN:
 		dev_info(&client->dev,
 			 "present, not used for anything, only GPIO\n");
 		break;
 	case TPS6105X_MODE_TORCH:
-		tps6105x_cells[0].name = "tps6105x-leds";
-		dev_warn(&client->dev,
-			 "torch mode is unsupported\n");
+		ret = tps6105x_add_device(tps6105x, &tps6105x_leds_cell);
 		break;
 	case TPS6105X_MODE_TORCH_FLASH:
-		tps6105x_cells[0].name = "tps6105x-flash";
-		dev_warn(&client->dev,
-			 "flash mode is unsupported\n");
+		ret = tps6105x_add_device(tps6105x, &tps6105x_flash_cell);
 		break;
 	case TPS6105X_MODE_VOLTAGE:
-		tps6105x_cells[0].name ="tps6105x-regulator";
+		ret = tps6105x_add_device(tps6105x, &tps6105x_regulator_cell);
 		break;
 	default:
+		dev_warn(&client->dev, "invalid mode: %d\n", pdata->mode);
 		break;
 	}
 
-	/* Set up and register the platform devices. */
-	for (i = 0; i < ARRAY_SIZE(tps6105x_cells); i++) {
-		/* One state holder for all drivers, this is simple */
-		tps6105x_cells[i].platform_data = tps6105x;
-		tps6105x_cells[i].pdata_size = sizeof(*tps6105x);
-	}
+	if (ret)
+		mfd_remove_devices(&client->dev);
 
-	return mfd_add_devices(&client->dev, 0, tps6105x_cells,
-			       ARRAY_SIZE(tps6105x_cells), NULL, 0, NULL);
+	return ret;
 }
 
 static int tps6105x_remove(struct i2c_client *client)

drivers/mfd/tps65217.c

@@ -39,6 +39,10 @@ static const struct mfd_cell tps65217s[] = {
 		.name = "tps65217-bl",
 		.of_compatible = "ti,tps65217-bl",
 	},
+	{
+		.name = "tps65217-charger",
+		.of_compatible = "ti,tps65217-charger",
+	},
 };
 
 /**

drivers/mfd/twl6040.c

@@ -647,6 +647,8 @@ static int twl6040_probe(struct i2c_client *client,
 
 	twl6040->clk32k = devm_clk_get(&client->dev, "clk32k");
 	if (IS_ERR(twl6040->clk32k)) {
+		if (PTR_ERR(twl6040->clk32k) == -EPROBE_DEFER)
+			return -EPROBE_DEFER;
 		dev_info(&client->dev, "clk32k is not handled\n");
 		twl6040->clk32k = NULL;
 	}

drivers/mfd/wm5110-tables.c

@@ -250,7 +250,7 @@ static const struct reg_sequence wm5110_revd_patch[] = {
 };
 
 /* Add extra headphone write sequence locations */
-static const struct reg_default wm5110_reve_patch[] = {
+static const struct reg_sequence wm5110_reve_patch[] = {
 	{ 0x80, 0x3 },
 	{ 0x80, 0x3 },
 	{ 0x4b, 0x138 },
@@ -1633,6 +1633,185 @@ static const struct reg_default wm5110_reg_default[] = {
 	{ 0x00000EF8, 0x0000 },    /* R3832  - ISRC 3 CTRL 3 */
 	{ 0x00000F00, 0x0000 },    /* R3840  - Clock Control */
 	{ 0x00000F01, 0x0000 },    /* R3841  - ANC_SRC */
+	{ 0x00000F08, 0x001c },    /* R3848  - ANC Coefficient */
+	{ 0x00000F09, 0x0000 },    /* R3849  - ANC Coefficient */
+	{ 0x00000F0A, 0x0000 },    /* R3850  - ANC Coefficient */
+	{ 0x00000F0B, 0x0000 },    /* R3851  - ANC Coefficient */
+	{ 0x00000F0C, 0x0000 },    /* R3852  - ANC Coefficient */
+	{ 0x00000F0D, 0x0000 },    /* R3853  - ANC Coefficient */
+	{ 0x00000F0E, 0x0000 },    /* R3854  - ANC Coefficient */
+	{ 0x00000F0F, 0x0000 },    /* R3855  - ANC Coefficient */
+	{ 0x00000F10, 0x0000 },    /* R3856  - ANC Coefficient */
+	{ 0x00000F11, 0x0000 },    /* R3857  - ANC Coefficient */
+	{ 0x00000F12, 0x0000 },    /* R3858  - ANC Coefficient */
+	{ 0x00000F15, 0x0000 },    /* R3861  - FCL Filter Control */
+	{ 0x00000F17, 0x0004 },    /* R3863  - FCL ADC Reformatter Control */
+	{ 0x00000F18, 0x0004 },    /* R3864  - ANC Coefficient */
+	{ 0x00000F19, 0x0002 },    /* R3865  - ANC Coefficient */
+	{ 0x00000F1A, 0x0000 },    /* R3866  - ANC Coefficient */
+	{ 0x00000F1B, 0x0010 },    /* R3867  - ANC Coefficient */
+	{ 0x00000F1C, 0x0000 },    /* R3868  - ANC Coefficient */
+	{ 0x00000F1D, 0x0000 },    /* R3869  - ANC Coefficient */
+	{ 0x00000F1E, 0x0000 },    /* R3870  - ANC Coefficient */
+	{ 0x00000F1F, 0x0000 },    /* R3871  - ANC Coefficient */
+	{ 0x00000F20, 0x0000 },    /* R3872  - ANC Coefficient */
+	{ 0x00000F21, 0x0000 },    /* R3873  - ANC Coefficient */
+	{ 0x00000F22, 0x0000 },    /* R3874  - ANC Coefficient */
+	{ 0x00000F23, 0x0000 },    /* R3875  - ANC Coefficient */
+	{ 0x00000F24, 0x0000 },    /* R3876  - ANC Coefficient */
+	{ 0x00000F25, 0x0000 },    /* R3877  - ANC Coefficient */
+	{ 0x00000F26, 0x0000 },    /* R3878  - ANC Coefficient */
+	{ 0x00000F27, 0x0000 },    /* R3879  - ANC Coefficient */
+	{ 0x00000F28, 0x0000 },    /* R3880  - ANC Coefficient */
+	{ 0x00000F29, 0x0000 },    /* R3881  - ANC Coefficient */
+	{ 0x00000F2A, 0x0000 },    /* R3882  - ANC Coefficient */
+	{ 0x00000F2B, 0x0000 },    /* R3883  - ANC Coefficient */
+	{ 0x00000F2C, 0x0000 },    /* R3884  - ANC Coefficient */
+	{ 0x00000F2D, 0x0000 },    /* R3885  - ANC Coefficient */
+	{ 0x00000F2E, 0x0000 },    /* R3886  - ANC Coefficient */
+	{ 0x00000F2F, 0x0000 },    /* R3887  - ANC Coefficient */
+	{ 0x00000F30, 0x0000 },    /* R3888  - ANC Coefficient */
+	{ 0x00000F31, 0x0000 },    /* R3889  - ANC Coefficient */
+	{ 0x00000F32, 0x0000 },    /* R3890  - ANC Coefficient */
+	{ 0x00000F33, 0x0000 },    /* R3891  - ANC Coefficient */
+	{ 0x00000F34, 0x0000 },    /* R3892  - ANC Coefficient */
+	{ 0x00000F35, 0x0000 },    /* R3893  - ANC Coefficient */
+	{ 0x00000F36, 0x0000 },    /* R3894  - ANC Coefficient */
+	{ 0x00000F37, 0x0000 },    /* R3895  - ANC Coefficient */
+	{ 0x00000F38, 0x0000 },    /* R3896  - ANC Coefficient */
+	{ 0x00000F39, 0x0000 },    /* R3897  - ANC Coefficient */
+	{ 0x00000F3A, 0x0000 },    /* R3898  - ANC Coefficient */
+	{ 0x00000F3B, 0x0000 },    /* R3899  - ANC Coefficient */
+	{ 0x00000F3C, 0x0000 },    /* R3900  - ANC Coefficient */
+	{ 0x00000F3D, 0x0000 },    /* R3901  - ANC Coefficient */
+	{ 0x00000F3E, 0x0000 },    /* R3902  - ANC Coefficient */
+	{ 0x00000F3F, 0x0000 },    /* R3903  - ANC Coefficient */
+	{ 0x00000F40, 0x0000 },    /* R3904  - ANC Coefficient */
+	{ 0x00000F41, 0x0000 },    /* R3905  - ANC Coefficient */
+	{ 0x00000F42, 0x0000 },    /* R3906  - ANC Coefficient */
+	{ 0x00000F43, 0x0000 },    /* R3907  - ANC Coefficient */
+	{ 0x00000F44, 0x0000 },    /* R3908  - ANC Coefficient */
+	{ 0x00000F45, 0x0000 },    /* R3909  - ANC Coefficient */
+	{ 0x00000F46, 0x0000 },    /* R3910  - ANC Coefficient */
+	{ 0x00000F47, 0x0000 },    /* R3911  - ANC Coefficient */
+	{ 0x00000F48, 0x0000 },    /* R3912  - ANC Coefficient */
+	{ 0x00000F49, 0x0000 },    /* R3913  - ANC Coefficient */
+	{ 0x00000F4A, 0x0000 },    /* R3914  - ANC Coefficient */
+	{ 0x00000F4B, 0x0000 },    /* R3915  - ANC Coefficient */
+	{ 0x00000F4C, 0x0000 },    /* R3916  - ANC Coefficient */
+	{ 0x00000F4D, 0x0000 },    /* R3917  - ANC Coefficient */
+	{ 0x00000F4E, 0x0000 },    /* R3918  - ANC Coefficient */
+	{ 0x00000F4F, 0x0000 },    /* R3919  - ANC Coefficient */
+	{ 0x00000F50, 0x0000 },    /* R3920  - ANC Coefficient */
+	{ 0x00000F51, 0x0000 },    /* R3921  - ANC Coefficient */
+	{ 0x00000F52, 0x0000 },    /* R3922  - ANC Coefficient */
+	{ 0x00000F53, 0x0000 },    /* R3923  - ANC Coefficient */
+	{ 0x00000F54, 0x0000 },    /* R3924  - ANC Coefficient */
+	{ 0x00000F55, 0x0000 },    /* R3925  - ANC Coefficient */
+	{ 0x00000F56, 0x0000 },    /* R3926  - ANC Coefficient */
+	{ 0x00000F57, 0x0000 },    /* R3927  - ANC Coefficient */
+	{ 0x00000F58, 0x0000 },    /* R3928  - ANC Coefficient */
+	{ 0x00000F59, 0x0000 },    /* R3929  - ANC Coefficient */
+	{ 0x00000F5A, 0x0000 },    /* R3930  - ANC Coefficient */
+	{ 0x00000F5B, 0x0000 },    /* R3931  - ANC Coefficient */
+	{ 0x00000F5C, 0x0000 },    /* R3932  - ANC Coefficient */
+	{ 0x00000F5D, 0x0000 },    /* R3933  - ANC Coefficient */
+	{ 0x00000F5E, 0x0000 },    /* R3934  - ANC Coefficient */
+	{ 0x00000F5F, 0x0000 },    /* R3935  - ANC Coefficient */
+	{ 0x00000F60, 0x0000 },    /* R3936  - ANC Coefficient */
+	{ 0x00000F61, 0x0000 },    /* R3937  - ANC Coefficient */
+	{ 0x00000F62, 0x0000 },    /* R3938  - ANC Coefficient */
+	{ 0x00000F63, 0x0000 },    /* R3939  - ANC Coefficient */
+	{ 0x00000F64, 0x0000 },    /* R3940  - ANC Coefficient */
+	{ 0x00000F65, 0x0000 },    /* R3941  - ANC Coefficient */
+	{ 0x00000F66, 0x0000 },    /* R3942  - ANC Coefficient */
+	{ 0x00000F67, 0x0000 },    /* R3943  - ANC Coefficient */
+	{ 0x00000F68, 0x0000 },    /* R3944  - ANC Coefficient */
+	{ 0x00000F69, 0x0000 },    /* R3945  - ANC Coefficient */
+	{ 0x00000F70, 0x0000 },    /* R3952  - FCR Filter Control */
+	{ 0x00000F72, 0x0004 },    /* R3954  - FCR ADC Reformatter Control */
+	{ 0x00000F73, 0x0004 },    /* R3955  - ANC Coefficient */
+	{ 0x00000F74, 0x0002 },    /* R3956  - ANC Coefficient */
+	{ 0x00000F75, 0x0000 },    /* R3957  - ANC Coefficient */
+	{ 0x00000F76, 0x0010 },    /* R3958  - ANC Coefficient */
+	{ 0x00000F77, 0x0000 },    /* R3959  - ANC Coefficient */
+	{ 0x00000F78, 0x0000 },    /* R3960  - ANC Coefficient */
+	{ 0x00000F79, 0x0000 },    /* R3961  - ANC Coefficient */
+	{ 0x00000F7A, 0x0000 },    /* R3962  - ANC Coefficient */
+	{ 0x00000F7B, 0x0000 },    /* R3963  - ANC Coefficient */
+	{ 0x00000F7C, 0x0000 },    /* R3964  - ANC Coefficient */
+	{ 0x00000F7D, 0x0000 },    /* R3965  - ANC Coefficient */
+	{ 0x00000F7E, 0x0000 },    /* R3966  - ANC Coefficient */
+	{ 0x00000F7F, 0x0000 },    /* R3967  - ANC Coefficient */
+	{ 0x00000F80, 0x0000 },    /* R3968  - ANC Coefficient */
+	{ 0x00000F81, 0x0000 },    /* R3969  - ANC Coefficient */
+	{ 0x00000F82, 0x0000 },    /* R3970  - ANC Coefficient */
+	{ 0x00000F83, 0x0000 },    /* R3971  - ANC Coefficient */
+	{ 0x00000F84, 0x0000 },    /* R3972  - ANC Coefficient */
+	{ 0x00000F85, 0x0000 },    /* R3973  - ANC Coefficient */
+	{ 0x00000F86, 0x0000 },    /* R3974  - ANC Coefficient */
+	{ 0x00000F87, 0x0000 },    /* R3975  - ANC Coefficient */
+	{ 0x00000F88, 0x0000 },    /* R3976  - ANC Coefficient */
+	{ 0x00000F89, 0x0000 },    /* R3977  - ANC Coefficient */
+	{ 0x00000F8A, 0x0000 },    /* R3978  - ANC Coefficient */
+	{ 0x00000F8B, 0x0000 },    /* R3979  - ANC Coefficient */
+	{ 0x00000F8C, 0x0000 },    /* R3980  - ANC Coefficient */
+	{ 0x00000F8D, 0x0000 },    /* R3981  - ANC Coefficient */
+	{ 0x00000F8E, 0x0000 },    /* R3982  - ANC Coefficient */
+	{ 0x00000F8F, 0x0000 },    /* R3983  - ANC Coefficient */
+	{ 0x00000F90, 0x0000 },    /* R3984  - ANC Coefficient */
+	{ 0x00000F91, 0x0000 },    /* R3985  - ANC Coefficient */
+	{ 0x00000F92, 0x0000 },    /* R3986  - ANC Coefficient */
+	{ 0x00000F93, 0x0000 },    /* R3987  - ANC Coefficient */
+	{ 0x00000F94, 0x0000 },    /* R3988  - ANC Coefficient */
+	{ 0x00000F95, 0x0000 },    /* R3989  - ANC Coefficient */
+	{ 0x00000F96, 0x0000 },    /* R3990  - ANC Coefficient */
+	{ 0x00000F97, 0x0000 },    /* R3991  - ANC Coefficient */
+	{ 0x00000F98, 0x0000 },    /* R3992  - ANC Coefficient */
+	{ 0x00000F99, 0x0000 },    /* R3993  - ANC Coefficient */
+	{ 0x00000F9A, 0x0000 },    /* R3994  - ANC Coefficient */
+	{ 0x00000F9B, 0x0000 },    /* R3995  - ANC Coefficient */
+	{ 0x00000F9C, 0x0000 },    /* R3996  - ANC Coefficient */
+	{ 0x00000F9D, 0x0000 },    /* R3997  - ANC Coefficient */
+	{ 0x00000F9E, 0x0000 },    /* R3998  - ANC Coefficient */
+	{ 0x00000F9F, 0x0000 },    /* R3999  - ANC Coefficient */
+	{ 0x00000FA0, 0x0000 },    /* R4000  - ANC Coefficient */
+	{ 0x00000FA1, 0x0000 },    /* R4001  - ANC Coefficient */
+	{ 0x00000FA2, 0x0000 },    /* R4002  - ANC Coefficient */
+	{ 0x00000FA3, 0x0000 },    /* R4003  - ANC Coefficient */
+	{ 0x00000FA4, 0x0000 },    /* R4004  - ANC Coefficient */
+	{ 0x00000FA5, 0x0000 },    /* R4005  - ANC Coefficient */
+	{ 0x00000FA6, 0x0000 },    /* R4006  - ANC Coefficient */
+	{ 0x00000FA7, 0x0000 },    /* R4007  - ANC Coefficient */
+	{ 0x00000FA8, 0x0000 },    /* R4008  - ANC Coefficient */
+	{ 0x00000FA9, 0x0000 },    /* R4009  - ANC Coefficient */
+	{ 0x00000FAA, 0x0000 },    /* R4010  - ANC Coefficient */
+	{ 0x00000FAB, 0x0000 },    /* R4011  - ANC Coefficient */
+	{ 0x00000FAC, 0x0000 },    /* R4012  - ANC Coefficient */
+	{ 0x00000FAD, 0x0000 },    /* R4013  - ANC Coefficient */
+	{ 0x00000FAE, 0x0000 },    /* R4014  - ANC Coefficient */
+	{ 0x00000FAF, 0x0000 },    /* R4015  - ANC Coefficient */
+	{ 0x00000FB0, 0x0000 },    /* R4016  - ANC Coefficient */
+	{ 0x00000FB1, 0x0000 },    /* R4017  - ANC Coefficient */
+	{ 0x00000FB2, 0x0000 },    /* R4018  - ANC Coefficient */
+	{ 0x00000FB3, 0x0000 },    /* R4019  - ANC Coefficient */
+	{ 0x00000FB4, 0x0000 },    /* R4020  - ANC Coefficient */
+	{ 0x00000FB5, 0x0000 },    /* R4021  - ANC Coefficient */
+	{ 0x00000FB6, 0x0000 },    /* R4022  - ANC Coefficient */
+	{ 0x00000FB7, 0x0000 },    /* R4023  - ANC Coefficient */
+	{ 0x00000FB8, 0x0000 },    /* R4024  - ANC Coefficient */
+	{ 0x00000FB9, 0x0000 },    /* R4025  - ANC Coefficient */
+	{ 0x00000FBA, 0x0000 },    /* R4026  - ANC Coefficient */
+	{ 0x00000FBB, 0x0000 },    /* R4027  - ANC Coefficient */
+	{ 0x00000FBC, 0x0000 },    /* R4028  - ANC Coefficient */
+	{ 0x00000FBD, 0x0000 },    /* R4029  - ANC Coefficient */
+	{ 0x00000FBE, 0x0000 },    /* R4030  - ANC Coefficient */
+	{ 0x00000FBF, 0x0000 },    /* R4031  - ANC Coefficient */
+	{ 0x00000FC0, 0x0000 },    /* R4032  - ANC Coefficient */
+	{ 0x00000FC1, 0x0000 },    /* R4033  - ANC Coefficient */
+	{ 0x00000FC2, 0x0000 },    /* R4034  - ANC Coefficient */
+	{ 0x00000FC3, 0x0000 },    /* R4035  - ANC Coefficient */
+	{ 0x00000FC4, 0x0000 },    /* R4036  - ANC Coefficient */
 	{ 0x00001100, 0x0010 },    /* R4352  - DSP1 Control 1 */
 	{ 0x00001200, 0x0010 },    /* R4608  - DSP2 Control 1 */
 	{ 0x00001300, 0x0010 },    /* R4864  - DSP3 Control 1 */
@@ -2710,6 +2889,13 @@ static bool wm5110_readable_register(struct device *dev, unsigned int reg)
 	case ARIZONA_CLOCK_CONTROL:
 	case ARIZONA_ANC_SRC:
 	case ARIZONA_DSP_STATUS:
+	case ARIZONA_ANC_COEFF_START ... ARIZONA_ANC_COEFF_END:
+	case ARIZONA_FCL_FILTER_CONTROL:
+	case ARIZONA_FCL_ADC_REFORMATTER_CONTROL:
+	case ARIZONA_FCL_COEFF_START ... ARIZONA_FCL_COEFF_END:
+	case ARIZONA_FCR_FILTER_CONTROL:
+	case ARIZONA_FCR_ADC_REFORMATTER_CONTROL:
+	case ARIZONA_FCR_COEFF_START ... ARIZONA_FCR_COEFF_END:
 	case ARIZONA_DSP1_CONTROL_1:
 	case ARIZONA_DSP1_CLOCKING_1:
 	case ARIZONA_DSP1_STATUS_1:

drivers/mfd/wm831x-core.c

@@ -1626,7 +1626,9 @@ int wm831x_device_init(struct wm831x *wm831x, unsigned long id, int irq)
 	mutex_init(&wm831x->io_lock);
 	mutex_init(&wm831x->key_lock);
 	dev_set_drvdata(wm831x->dev, wm831x);
-	wm831x->soft_shutdown = pdata->soft_shutdown;
+
+	if (pdata)
+		wm831x->soft_shutdown = pdata->soft_shutdown;
 
 	ret = wm831x_reg_read(wm831x, WM831X_PARENT_ID);
 	if (ret < 0) {

drivers/mfd/wm8998-tables.c

@@ -21,7 +21,7 @@
 #define WM8998_NUM_AOD_ISR 2
 #define WM8998_NUM_ISR 5
 
-static const struct reg_default wm8998_rev_a_patch[] = {
+static const struct reg_sequence wm8998_rev_a_patch[] = {
 	{ 0x0212, 0x0000 },
 	{ 0x0211, 0x0014 },
 	{ 0x04E4, 0x0E0D },
@@ -199,8 +199,6 @@ static const struct reg_default wm8998_reg_default[] = {
 	{ 0x00000069, 0x01FF },    /* R105   - Always On Triggers Sequence Select 4 */
 	{ 0x0000006A, 0x01FF },    /* R106   - Always On Triggers Sequence Select 5 */
 	{ 0x0000006B, 0x01FF },    /* R107   - Always On Triggers Sequence Select 6 */
-	{ 0x0000006E, 0x01FF },    /* R110   - Trigger Sequence Select 32 */
-	{ 0x0000006F, 0x01FF },    /* R111   - Trigger Sequence Select 33 */
 	{ 0x00000090, 0x0000 },    /* R144   - Haptics Control 1 */
 	{ 0x00000091, 0x7FFF },    /* R145   - Haptics Control 2 */
 	{ 0x00000092, 0x0000 },    /* R146   - Haptics phase 1 intensity */
@@ -270,16 +268,13 @@ static const struct reg_default wm8998_reg_default[] = {
 	{ 0x0000021A, 0x01A6 },    /* R538   - Mic Bias Ctrl 3 */
 	{ 0x00000293, 0x0080 },    /* R659   - Accessory Detect Mode 1 */
 	{ 0x0000029B, 0x0000 },    /* R667   - Headphone Detect 1 */
-	{ 0x0000029C, 0x0000 },    /* R668   - Headphone Detect 2 */
 	{ 0x000002A2, 0x0000 },    /* R674   - Micd Clamp control */
 	{ 0x000002A3, 0x1102 },    /* R675   - Mic Detect 1 */
 	{ 0x000002A4, 0x009F },    /* R676   - Mic Detect 2 */
-	{ 0x000002A5, 0x0000 },    /* R677   - Mic Detect 3 */
 	{ 0x000002A6, 0x3737 },    /* R678   - Mic Detect Level 1 */
 	{ 0x000002A7, 0x2C37 },    /* R679   - Mic Detect Level 2 */
 	{ 0x000002A8, 0x1422 },    /* R680   - Mic Detect Level 3 */
 	{ 0x000002A9, 0x030A },    /* R681   - Mic Detect Level 4 */
-	{ 0x000002AB, 0x0000 },    /* R683   - Mic Detect 4 */
 	{ 0x000002CB, 0x0000 },    /* R715   - Isolation control */
 	{ 0x000002D3, 0x0000 },    /* R723   - Jack detect analogue */
 	{ 0x00000300, 0x0000 },    /* R768   - Input Enables */
@@ -707,13 +702,11 @@ static const struct reg_default wm8998_reg_default[] = {
 	{ 0x00000D1A, 0xFFFF },    /* R3354  - IRQ2 Status 3 Mask */
 	{ 0x00000D1B, 0xFFFF },    /* R3355  - IRQ2 Status 4 Mask */
 	{ 0x00000D1C, 0xFEFF },    /* R3356  - IRQ2 Status 5 Mask */
-	{ 0x00000D1D, 0xFFFF },    /* R3357  - IRQ2 Status 6 Mask */
 	{ 0x00000D1F, 0x0000 },    /* R3359  - IRQ2 Control */
 	{ 0x00000D53, 0xFFFF },    /* R3411  - AOD IRQ Mask IRQ1 */
 	{ 0x00000D54, 0xFFFF },    /* R3412  - AOD IRQ Mask IRQ2 */
 	{ 0x00000D56, 0x0000 },    /* R3414  - Jack detect debounce */
 	{ 0x00000E00, 0x0000 },    /* R3584  - FX_Ctrl1 */
-	{ 0x00000E01, 0x0000 },    /* R3585  - FX_Ctrl2 */
 	{ 0x00000E10, 0x6318 },    /* R3600  - EQ1_1 */
 	{ 0x00000E11, 0x6300 },    /* R3601  - EQ1_2 */
 	{ 0x00000E12, 0x0FC8 },    /* R3602  - EQ1_3 */
@@ -833,7 +826,6 @@ static bool wm8998_readable_register(struct device *dev, unsigned int reg)
 	switch (reg) {
 	case ARIZONA_SOFTWARE_RESET:
 	case ARIZONA_DEVICE_REVISION:
-	case ARIZONA_CTRL_IF_SPI_CFG_1:
 	case ARIZONA_CTRL_IF_I2C1_CFG_1:
 	case ARIZONA_CTRL_IF_I2C1_CFG_2:
 	case ARIZONA_WRITE_SEQUENCER_CTRL_0:

drivers/misc/eeprom/at24.c

@@ -21,6 +21,7 @@
 #include <linux/bitops.h>
 #include <linux/jiffies.h>
 #include <linux/of.h>
+#include <linux/acpi.h>
 #include <linux/i2c.h>
 #include <linux/platform_data/at24.h>
 
@@ -131,6 +132,12 @@ static const struct i2c_device_id at24_ids[] = {
 };
 MODULE_DEVICE_TABLE(i2c, at24_ids);
 
+static const struct acpi_device_id at24_acpi_ids[] = {
+	{ "INT3499", AT24_DEVICE_MAGIC(8192 / 8, 0) },
+	{ }
+};
+MODULE_DEVICE_TABLE(acpi, at24_acpi_ids);
+
 /*-------------------------------------------------------------------------*/
 
 /*
@@ -467,21 +474,29 @@ static void at24_get_ofdata(struct i2c_client *client,
 static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id)
 {
 	struct at24_platform_data chip;
+	kernel_ulong_t magic = 0;
 	bool writable;
 	int use_smbus = 0;
 	int use_smbus_write = 0;
 	struct at24_data *at24;
 	int err;
 	unsigned i, num_addresses;
-	kernel_ulong_t magic;
 
 	if (client->dev.platform_data) {
 		chip = *(struct at24_platform_data *)client->dev.platform_data;
 	} else {
-		if (!id->driver_data)
+		if (id) {
+			magic = id->driver_data;
+		} else {
+			const struct acpi_device_id *aid;
+
+			aid = acpi_match_device(at24_acpi_ids, &client->dev);
+			if (aid)
+				magic = aid->driver_data;
+		}
+		if (!magic)
 			return -ENODEV;
 
-		magic = id->driver_data;
 		chip.byte_len = BIT(magic & AT24_BITMASK(AT24_SIZE_BYTELEN));
 		magic >>= AT24_SIZE_BYTELEN;
 		chip.flags = magic & AT24_BITMASK(AT24_SIZE_FLAGS);
@@ -661,6 +676,7 @@ static int at24_remove(struct i2c_client *client)
 static struct i2c_driver at24_driver = {
 	.driver = {
 		.name = "at24",
+		.acpi_match_table = ACPI_PTR(at24_acpi_ids),
 	},
 	.probe = at24_probe,
 	.remove = at24_remove,

drivers/platform/x86/Kconfig

@@ -932,6 +932,7 @@ config PVPANIC
 
 config INTEL_PMC_IPC
 	tristate "Intel PMC IPC Driver"
+	depends on ACPI
 	---help---
 	This driver provides support for PMC control on some Intel platforms.
 	The PMC is an ARC processor which defines IPC commands for communication

drivers/power/Kconfig

@@ -203,6 +203,16 @@ config CHARGER_DA9150
 	  This driver can also be built as a module. If so, the module will be
 	  called da9150-charger.
 
+config BATTERY_DA9150
+	tristate "Dialog Semiconductor DA9150 Fuel Gauge support"
+	depends on MFD_DA9150
+	help
+	  Say Y here to enable support for the Fuel-Gauge unit of the DA9150
+	  Integrated Charger & Fuel-Gauge IC
+
+	  This driver can also be built as a module. If so, the module will be
+	  called da9150-fg.
+
 config AXP288_CHARGER
 	tristate "X-Powers AXP288 Charger"
 	depends on MFD_AXP20X && EXTCON_AXP288

drivers/power/Makefile

@@ -34,6 +34,7 @@ obj-$(CONFIG_BATTERY_BQ27XXX)	+= bq27xxx_battery.o
 obj-$(CONFIG_BATTERY_DA9030)	+= da9030_battery.o
 obj-$(CONFIG_BATTERY_DA9052)	+= da9052-battery.o
 obj-$(CONFIG_CHARGER_DA9150)	+= da9150-charger.o
+obj-$(CONFIG_BATTERY_DA9150)	+= da9150-fg.o
 obj-$(CONFIG_BATTERY_MAX17040)	+= max17040_battery.o
 obj-$(CONFIG_BATTERY_MAX17042)	+= max17042_battery.o
 obj-$(CONFIG_BATTERY_Z2)	+= z2_battery.o

drivers/power/da9150-fg.c

+/*
+ * DA9150 Fuel-Gauge Driver
+ *
+ * Copyright (c) 2015 Dialog Semiconductor
+ *
+ * Author: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/power_supply.h>
+#include <linux/list.h>
+#include <asm/div64.h>
+#include <linux/mfd/da9150/core.h>
+#include <linux/mfd/da9150/registers.h>
+
+/* Core2Wire */
+#define DA9150_QIF_READ		(0x0 << 7)
+#define DA9150_QIF_WRITE	(0x1 << 7)
+#define DA9150_QIF_CODE_MASK	0x7F
+
+#define DA9150_QIF_BYTE_SIZE	8
+#define DA9150_QIF_BYTE_MASK	0xFF
+#define DA9150_QIF_SHORT_SIZE	2
+#define DA9150_QIF_LONG_SIZE	4
+
+/* QIF Codes */
+#define DA9150_QIF_UAVG			6
+#define DA9150_QIF_UAVG_SIZE		DA9150_QIF_LONG_SIZE
+#define DA9150_QIF_IAVG			8
+#define DA9150_QIF_IAVG_SIZE		DA9150_QIF_LONG_SIZE
+#define DA9150_QIF_NTCAVG		12
+#define DA9150_QIF_NTCAVG_SIZE		DA9150_QIF_LONG_SIZE
+#define DA9150_QIF_SHUNT_VAL		36
+#define DA9150_QIF_SHUNT_VAL_SIZE	DA9150_QIF_SHORT_SIZE
+#define DA9150_QIF_SD_GAIN		38
+#define DA9150_QIF_SD_GAIN_SIZE		DA9150_QIF_LONG_SIZE
+#define DA9150_QIF_FCC_MAH		40
+#define DA9150_QIF_FCC_MAH_SIZE		DA9150_QIF_SHORT_SIZE
+#define DA9150_QIF_SOC_PCT		43
+#define DA9150_QIF_SOC_PCT_SIZE		DA9150_QIF_SHORT_SIZE
+#define DA9150_QIF_CHARGE_LIMIT		44
+#define DA9150_QIF_CHARGE_LIMIT_SIZE	DA9150_QIF_SHORT_SIZE
+#define DA9150_QIF_DISCHARGE_LIMIT	45
+#define DA9150_QIF_DISCHARGE_LIMIT_SIZE	DA9150_QIF_SHORT_SIZE
+#define DA9150_QIF_FW_MAIN_VER		118
+#define DA9150_QIF_FW_MAIN_VER_SIZE	DA9150_QIF_SHORT_SIZE
+#define DA9150_QIF_E_FG_STATUS		126
+#define DA9150_QIF_E_FG_STATUS_SIZE	DA9150_QIF_SHORT_SIZE
+#define DA9150_QIF_SYNC			127
+#define DA9150_QIF_SYNC_SIZE		DA9150_QIF_SHORT_SIZE
+#define DA9150_QIF_MAX_CODES		128
+
+/* QIF Sync Timeout */
+#define DA9150_QIF_SYNC_TIMEOUT		1000
+#define DA9150_QIF_SYNC_RETRIES		10
+
+/* QIF E_FG_STATUS */
+#define DA9150_FG_IRQ_LOW_SOC_MASK	(1 << 0)
+#define DA9150_FG_IRQ_HIGH_SOC_MASK	(1 << 1)
+#define DA9150_FG_IRQ_SOC_MASK	\
+	(DA9150_FG_IRQ_LOW_SOC_MASK | DA9150_FG_IRQ_HIGH_SOC_MASK)
+
+/* Private data */
+struct da9150_fg {
+	struct da9150 *da9150;
+	struct device *dev;
+
+	struct mutex io_lock;
+
+	struct power_supply *battery;
+	struct delayed_work work;
+	u32 interval;
+
+	int warn_soc;
+	int crit_soc;
+	int soc;
+};
+
+/* Battery Properties */
+static u32 da9150_fg_read_attr(struct da9150_fg *fg, u8 code, u8 size)
+
+{
+	u8 buf[size];
+	u8 read_addr;
+	u32 res = 0;
+	int i;
+
+	/* Set QIF code (READ mode) */
+	read_addr = (code & DA9150_QIF_CODE_MASK) | DA9150_QIF_READ;
+
+	da9150_read_qif(fg->da9150, read_addr, size, buf);
+	for (i = 0; i < size; ++i)
+		res |= (buf[i] << (i * DA9150_QIF_BYTE_SIZE));
+
+	return res;
+}
+
+static void da9150_fg_write_attr(struct da9150_fg *fg, u8 code, u8 size,
+				 u32 val)
+
+{
+	u8 buf[size];
+	u8 write_addr;
+	int i;
+
+	/* Set QIF code (WRITE mode) */
+	write_addr = (code & DA9150_QIF_CODE_MASK) | DA9150_QIF_WRITE;
+
+	for (i = 0; i < size; ++i) {
+		buf[i] = (val >> (i * DA9150_QIF_BYTE_SIZE)) &
+			 DA9150_QIF_BYTE_MASK;
+	}
+	da9150_write_qif(fg->da9150, write_addr, size, buf);
+}
+
+/* Trigger QIF Sync to update QIF readable data */
+static void da9150_fg_read_sync_start(struct da9150_fg *fg)
+{
+	int i = 0;
+	u32 res = 0;
+
+	mutex_lock(&fg->io_lock);
+
+	/* Check if QIF sync already requested, and write to sync if not */
+	res = da9150_fg_read_attr(fg, DA9150_QIF_SYNC,
+				  DA9150_QIF_SYNC_SIZE);
+	if (res > 0)
+		da9150_fg_write_attr(fg, DA9150_QIF_SYNC,
+				     DA9150_QIF_SYNC_SIZE, 0);
+
+	/* Wait for sync to complete */
+	res = 0;
+	while ((res == 0) && (i++ < DA9150_QIF_SYNC_RETRIES)) {
+		usleep_range(DA9150_QIF_SYNC_TIMEOUT,
+			     DA9150_QIF_SYNC_TIMEOUT * 2);
+		res = da9150_fg_read_attr(fg, DA9150_QIF_SYNC,
+					  DA9150_QIF_SYNC_SIZE);
+	}
+
+	/* Check if sync completed */
+	if (res == 0)
+		dev_err(fg->dev, "Failed to perform QIF read sync!\n");
+}
+
+/*
+ * Should always be called after QIF sync read has been performed, and all
+ * attributes required have been accessed.
+ */
+static inline void da9150_fg_read_sync_end(struct da9150_fg *fg)
+{
+	mutex_unlock(&fg->io_lock);
+}
+
+/* Sync read of single QIF attribute */
+static u32 da9150_fg_read_attr_sync(struct da9150_fg *fg, u8 code, u8 size)
+{
+	u32 val;
+
+	da9150_fg_read_sync_start(fg);
+	val = da9150_fg_read_attr(fg, code, size);
+	da9150_fg_read_sync_end(fg);
+
+	return val;
+}
+
+/* Wait for QIF Sync, write QIF data and wait for ack */
+static void da9150_fg_write_attr_sync(struct da9150_fg *fg, u8 code, u8 size,
+				      u32 val)
+{
+	int i = 0;
+	u32 res = 0, sync_val;
+
+	mutex_lock(&fg->io_lock);
+
+	/* Check if QIF sync already requested */
+	res = da9150_fg_read_attr(fg, DA9150_QIF_SYNC,
+				  DA9150_QIF_SYNC_SIZE);
+
+	/* Wait for an existing sync to complete */
+	while ((res == 0) && (i++ < DA9150_QIF_SYNC_RETRIES)) {
+		usleep_range(DA9150_QIF_SYNC_TIMEOUT,
+			     DA9150_QIF_SYNC_TIMEOUT * 2);
+		res = da9150_fg_read_attr(fg, DA9150_QIF_SYNC,
+					  DA9150_QIF_SYNC_SIZE);
+	}
+
+	if (res == 0) {
+		dev_err(fg->dev, "Timeout waiting for existing QIF sync!\n");
+		mutex_unlock(&fg->io_lock);
+		return;
+	}
+
+	/* Write value for QIF code */
+	da9150_fg_write_attr(fg, code, size, val);
+
+	/* Wait for write acknowledgment */
+	i = 0;
+	sync_val = res;
+	while ((res == sync_val) && (i++ < DA9150_QIF_SYNC_RETRIES)) {
+		usleep_range(DA9150_QIF_SYNC_TIMEOUT,
+			     DA9150_QIF_SYNC_TIMEOUT * 2);
+		res = da9150_fg_read_attr(fg, DA9150_QIF_SYNC,
+					  DA9150_QIF_SYNC_SIZE);
+	}
+
+	mutex_unlock(&fg->io_lock);
+
+	/* Check write was actually successful */
+	if (res != (sync_val + 1))
+		dev_err(fg->dev, "Error performing QIF sync write for code %d\n",
+			code);
+}
+
+/* Power Supply attributes */
+static int da9150_fg_capacity(struct da9150_fg *fg,
+			      union power_supply_propval *val)
+{
+	val->intval = da9150_fg_read_attr_sync(fg, DA9150_QIF_SOC_PCT,
+					       DA9150_QIF_SOC_PCT_SIZE);
+
+	if (val->intval > 100)
+		val->intval = 100;
+
+	return 0;
+}
+
+static int da9150_fg_current_avg(struct da9150_fg *fg,
+				 union power_supply_propval *val)
+{
+	u32 iavg, sd_gain, shunt_val;
+	u64 div, res;
+
+	da9150_fg_read_sync_start(fg);
+	iavg = da9150_fg_read_attr(fg, DA9150_QIF_IAVG,
+				   DA9150_QIF_IAVG_SIZE);
+	shunt_val = da9150_fg_read_attr(fg, DA9150_QIF_SHUNT_VAL,
+					DA9150_QIF_SHUNT_VAL_SIZE);
+	sd_gain = da9150_fg_read_attr(fg, DA9150_QIF_SD_GAIN,
+				      DA9150_QIF_SD_GAIN_SIZE);
+	da9150_fg_read_sync_end(fg);
+
+	div = (u64) (sd_gain * shunt_val * 65536ULL);
+	do_div(div, 1000000);
+	res = (u64) (iavg * 1000000ULL);
+	do_div(res, div);
+
+	val->intval = (int) res;
+
+	return 0;
+}
+
+static int da9150_fg_voltage_avg(struct da9150_fg *fg,
+				 union power_supply_propval *val)
+{
+	u64 res;
+
+	val->intval = da9150_fg_read_attr_sync(fg, DA9150_QIF_UAVG,
+					       DA9150_QIF_UAVG_SIZE);
+
+	res = (u64) (val->intval * 186ULL);
+	do_div(res, 10000);
+	val->intval = (int) res;
+
+	return 0;
+}
+
+static int da9150_fg_charge_full(struct da9150_fg *fg,
+				 union power_supply_propval *val)
+{
+	val->intval = da9150_fg_read_attr_sync(fg, DA9150_QIF_FCC_MAH,
+					       DA9150_QIF_FCC_MAH_SIZE);
+
+	val->intval = val->intval * 1000;
+
+	return 0;
+}
+
+/*
+ * Temperature reading from device is only valid if battery/system provides
+ * valid NTC to associated pin of DA9150 chip.
+ */
+static int da9150_fg_temp(struct da9150_fg *fg,
+			  union power_supply_propval *val)
+{
+	val->intval = da9150_fg_read_attr_sync(fg, DA9150_QIF_NTCAVG,
+					       DA9150_QIF_NTCAVG_SIZE);
+
+	val->intval = (val->intval * 10) / 1048576;
+
+	return 0;
+}
+
+static enum power_supply_property da9150_fg_props[] = {
+	POWER_SUPPLY_PROP_CAPACITY,
+	POWER_SUPPLY_PROP_CURRENT_AVG,
+	POWER_SUPPLY_PROP_VOLTAGE_AVG,
+	POWER_SUPPLY_PROP_CHARGE_FULL,
+	POWER_SUPPLY_PROP_TEMP,
+};
+
+static int da9150_fg_get_prop(struct power_supply *psy,
+			      enum power_supply_property psp,
+			      union power_supply_propval *val)
+{
+	struct da9150_fg *fg = dev_get_drvdata(psy->dev.parent);
+	int ret;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_CAPACITY:
+		ret = da9150_fg_capacity(fg, val);
+		break;
+	case POWER_SUPPLY_PROP_CURRENT_AVG:
+		ret = da9150_fg_current_avg(fg, val);
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_AVG:
+		ret = da9150_fg_voltage_avg(fg, val);
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_FULL:
+		ret = da9150_fg_charge_full(fg, val);
+		break;
+	case POWER_SUPPLY_PROP_TEMP:
+		ret = da9150_fg_temp(fg, val);
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+	return ret;
+}
+
+/* Repeated SOC check */
+static bool da9150_fg_soc_changed(struct da9150_fg *fg)
+{
+	union power_supply_propval val;
+
+	da9150_fg_capacity(fg, &val);
+	if (val.intval != fg->soc) {
+		fg->soc = val.intval;
+		return true;
+	}
+
+	return false;
+}
+
+static void da9150_fg_work(struct work_struct *work)
+{
+	struct da9150_fg *fg = container_of(work, struct da9150_fg, work.work);
+
+	/* Report if SOC has changed */
+	if (da9150_fg_soc_changed(fg))
+		power_supply_changed(fg->battery);
+
+	schedule_delayed_work(&fg->work, msecs_to_jiffies(fg->interval));
+}
+
+/* SOC level event configuration */
+static void da9150_fg_soc_event_config(struct da9150_fg *fg)
+{
+	int soc;
+
+	soc = da9150_fg_read_attr_sync(fg, DA9150_QIF_SOC_PCT,
+				       DA9150_QIF_SOC_PCT_SIZE);
+
+	if (soc > fg->warn_soc) {
+		/* If SOC > warn level, set discharge warn level event */
+		da9150_fg_write_attr_sync(fg, DA9150_QIF_DISCHARGE_LIMIT,
+					  DA9150_QIF_DISCHARGE_LIMIT_SIZE,
+					  fg->warn_soc + 1);
+	} else if ((soc <= fg->warn_soc) && (soc > fg->crit_soc)) {
+		/*
+		 * If SOC <= warn level, set discharge crit level event,
+		 * and set charge warn level event.
+		 */
+		da9150_fg_write_attr_sync(fg, DA9150_QIF_DISCHARGE_LIMIT,
+					  DA9150_QIF_DISCHARGE_LIMIT_SIZE,
+					  fg->crit_soc + 1);
+
+		da9150_fg_write_attr_sync(fg, DA9150_QIF_CHARGE_LIMIT,
+					  DA9150_QIF_CHARGE_LIMIT_SIZE,
+					  fg->warn_soc);
+	} else if (soc <= fg->crit_soc) {
+		/* If SOC <= crit level, set charge crit level event */
+		da9150_fg_write_attr_sync(fg, DA9150_QIF_CHARGE_LIMIT,
+					  DA9150_QIF_CHARGE_LIMIT_SIZE,
+					  fg->crit_soc);
+	}
+}
+
+static irqreturn_t da9150_fg_irq(int irq, void *data)
+{
+	struct da9150_fg *fg = data;
+	u32 e_fg_status;
+
+	/* Read FG IRQ status info */
+	e_fg_status = da9150_fg_read_attr(fg, DA9150_QIF_E_FG_STATUS,
+					  DA9150_QIF_E_FG_STATUS_SIZE);
+
+	/* Handle warning/critical threhold events */
+	if (e_fg_status & DA9150_FG_IRQ_SOC_MASK)
+		da9150_fg_soc_event_config(fg);
+
+	/* Clear any FG IRQs */
+	da9150_fg_write_attr(fg, DA9150_QIF_E_FG_STATUS,
+			     DA9150_QIF_E_FG_STATUS_SIZE, e_fg_status);
+
+	return IRQ_HANDLED;
+}
+
+static struct da9150_fg_pdata *da9150_fg_dt_pdata(struct device *dev)
+{
+	struct device_node *fg_node = dev->of_node;
+	struct da9150_fg_pdata *pdata;
+
+	pdata = devm_kzalloc(dev, sizeof(struct da9150_fg_pdata), GFP_KERNEL);
+	if (!pdata)
+		return NULL;
+
+	of_property_read_u32(fg_node, "dlg,update-interval",
+			     &pdata->update_interval);
+	of_property_read_u8(fg_node, "dlg,warn-soc-level",
+			    &pdata->warn_soc_lvl);
+	of_property_read_u8(fg_node, "dlg,crit-soc-level",
+			    &pdata->crit_soc_lvl);
+
+	return pdata;
+}
+
+static const struct power_supply_desc fg_desc = {
+	.name		= "da9150-fg",
+	.type		= POWER_SUPPLY_TYPE_BATTERY,
+	.properties	= da9150_fg_props,
+	.num_properties	= ARRAY_SIZE(da9150_fg_props),
+	.get_property	= da9150_fg_get_prop,
+};
+
+static int da9150_fg_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct da9150 *da9150 = dev_get_drvdata(dev->parent);
+	struct da9150_fg_pdata *fg_pdata = dev_get_platdata(dev);
+	struct da9150_fg *fg;
+	int ver, irq, ret = 0;
+
+	fg = devm_kzalloc(dev, sizeof(*fg), GFP_KERNEL);
+	if (fg == NULL)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, fg);
+	fg->da9150 = da9150;
+	fg->dev = dev;
+
+	mutex_init(&fg->io_lock);
+
+	/* Enable QIF */
+	da9150_set_bits(da9150, DA9150_CORE2WIRE_CTRL_A, DA9150_FG_QIF_EN_MASK,
+			DA9150_FG_QIF_EN_MASK);
+
+	fg->battery = devm_power_supply_register(dev, &fg_desc, NULL);
+	if (IS_ERR(fg->battery)) {
+		ret = PTR_ERR(fg->battery);
+		return ret;
+	}
+
+	ver = da9150_fg_read_attr(fg, DA9150_QIF_FW_MAIN_VER,
+				  DA9150_QIF_FW_MAIN_VER_SIZE);
+	dev_info(dev, "Version: 0x%x\n", ver);
+
+	/* Handle DT data if provided */
+	if (dev->of_node) {
+		fg_pdata = da9150_fg_dt_pdata(dev);
+		dev->platform_data = fg_pdata;
+	}
+
+	/* Handle any pdata provided */
+	if (fg_pdata) {
+		fg->interval = fg_pdata->update_interval;
+
+		if (fg_pdata->warn_soc_lvl > 100)
+			dev_warn(dev, "Invalid SOC warning level provided, Ignoring");
+		else
+			fg->warn_soc = fg_pdata->warn_soc_lvl;
+
+		if ((fg_pdata->crit_soc_lvl > 100) ||
+		    (fg_pdata->crit_soc_lvl >= fg_pdata->warn_soc_lvl))
+			dev_warn(dev, "Invalid SOC critical level provided, Ignoring");
+		else
+			fg->crit_soc = fg_pdata->crit_soc_lvl;
+
+
+	}
+
+	/* Configure initial SOC level events */
+	da9150_fg_soc_event_config(fg);
+
+	/*
+	 * If an interval period has been provided then setup repeating
+	 * work for reporting data updates.
+	 */
+	if (fg->interval) {
+		INIT_DELAYED_WORK(&fg->work, da9150_fg_work);
+		schedule_delayed_work(&fg->work,
+				      msecs_to_jiffies(fg->interval));
+	}
+
+	/* Register IRQ */
+	irq = platform_get_irq_byname(pdev, "FG");
+	if (irq < 0) {
+		dev_err(dev, "Failed to get IRQ FG: %d\n", irq);
+		ret = irq;
+		goto irq_fail;
+	}
+
+	ret = devm_request_threaded_irq(dev, irq, NULL, da9150_fg_irq,
+					IRQF_ONESHOT, "FG", fg);
+	if (ret) {
+		dev_err(dev, "Failed to request IRQ %d: %d\n", irq, ret);
+		goto irq_fail;
+	}
+
+	return 0;
+
+irq_fail:
+	if (fg->interval)
+		cancel_delayed_work(&fg->work);
+
+	return ret;
+}
+
+static int da9150_fg_remove(struct platform_device *pdev)
+{
+	struct da9150_fg *fg = platform_get_drvdata(pdev);
+
+	if (fg->interval)
+		cancel_delayed_work(&fg->work);
+
+	return 0;
+}
+
+static int da9150_fg_resume(struct platform_device *pdev)
+{
+	struct da9150_fg *fg = platform_get_drvdata(pdev);
+
+	/*
+	 * Trigger SOC check to happen now so as to indicate any value change
+	 * since last check before suspend.
+	 */
+	if (fg->interval)
+		flush_delayed_work(&fg->work);
+
+	return 0;
+}
+
+static struct platform_driver da9150_fg_driver = {
+	.driver = {
+		.name = "da9150-fuel-gauge",
+	},
+	.probe = da9150_fg_probe,
+	.remove = da9150_fg_remove,
+	.resume = da9150_fg_resume,
+};
+
+module_platform_driver(da9150_fg_driver);
+
+MODULE_DESCRIPTION("Fuel-Gauge Driver for DA9150");
+MODULE_AUTHOR("Adam Thomson <Adam.Thomson.Opensource@diasemi.com>");
+MODULE_LICENSE("GPL");

include/dt-bindings/mfd/atmel-flexcom.h

+/*
+ * This header provides macros for Atmel Flexcom DT bindings.
+ *
+ * Copyright (C) 2015 Cyrille Pitchen <cyrille.pitchen@atmel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __DT_BINDINGS_ATMEL_FLEXCOM_H__
+#define __DT_BINDINGS_ATMEL_FLEXCOM_H__
+
+#define ATMEL_FLEXCOM_MODE_USART	1
+#define ATMEL_FLEXCOM_MODE_SPI		2
+#define ATMEL_FLEXCOM_MODE_TWI		3
+
+#endif /* __DT_BINDINGS_ATMEL_FLEXCOM_H__ */

include/linux/mfd/88pm80x.h

@@ -21,6 +21,7 @@ enum {
 	CHIP_INVALID = 0,
 	CHIP_PM800,
 	CHIP_PM805,
+	CHIP_PM860,
 	CHIP_MAX,
 };
 

include/linux/mfd/arizona/registers.h

@@ -1065,6 +1065,16 @@
 #define ARIZONA_CLOCK_CONTROL                    0xF00
 #define ARIZONA_ANC_SRC                          0xF01
 #define ARIZONA_DSP_STATUS                       0xF02
+#define ARIZONA_ANC_COEFF_START                  0xF08
+#define ARIZONA_ANC_COEFF_END                    0xF12
+#define ARIZONA_FCL_FILTER_CONTROL               0xF15
+#define ARIZONA_FCL_ADC_REFORMATTER_CONTROL      0xF17
+#define ARIZONA_FCL_COEFF_START                  0xF18
+#define ARIZONA_FCL_COEFF_END                    0xF69
+#define ARIZONA_FCR_FILTER_CONTROL               0xF70
+#define ARIZONA_FCR_ADC_REFORMATTER_CONTROL      0xF72
+#define ARIZONA_FCR_COEFF_START                  0xF73
+#define ARIZONA_FCR_COEFF_END                    0xFC4
 #define ARIZONA_DSP1_CONTROL_1                   0x1100
 #define ARIZONA_DSP1_CLOCKING_1                  0x1101
 #define ARIZONA_DSP1_STATUS_1                    0x1104
@@ -8050,6 +8060,66 @@
 #define ARIZONA_ISRC3_NOTCH_ENA_SHIFT                 0  /* ISRC3_NOTCH_ENA */
 #define ARIZONA_ISRC3_NOTCH_ENA_WIDTH                 1  /* ISRC3_NOTCH_ENA */
 
+/*
+ * R3840 (0xF00) - Clock Control
+ */
+#define ARIZONA_EXT_NG_SEL_CLR                   0x0080  /* EXT_NG_SEL_CLR */
+#define ARIZONA_EXT_NG_SEL_CLR_MASK              0x0080  /* EXT_NG_SEL_CLR */
+#define ARIZONA_EXT_NG_SEL_CLR_SHIFT                  7  /* EXT_NG_SEL_CLR */
+#define ARIZONA_EXT_NG_SEL_CLR_WIDTH                  1  /* EXT_NG_SEL_CLR */
+#define ARIZONA_EXT_NG_SEL_SET                   0x0040  /* EXT_NG_SEL_SET */
+#define ARIZONA_EXT_NG_SEL_SET_MASK              0x0040  /* EXT_NG_SEL_SET */
+#define ARIZONA_EXT_NG_SEL_SET_SHIFT                  6  /* EXT_NG_SEL_SET */
+#define ARIZONA_EXT_NG_SEL_SET_WIDTH                  1  /* EXT_NG_SEL_SET */
+#define ARIZONA_CLK_R_ENA_CLR                    0x0020  /* CLK_R_ENA_CLR */
+#define ARIZONA_CLK_R_ENA_CLR_MASK               0x0020  /* CLK_R_ENA_CLR */
+#define ARIZONA_CLK_R_ENA_CLR_SHIFT                   5  /* CLK_R_ENA_CLR */
+#define ARIZONA_CLK_R_ENA_CLR_WIDTH                   1  /* CLK_R_ENA_CLR */
+#define ARIZONA_CLK_R_ENA_SET                    0x0010  /* CLK_R_ENA_SET */
+#define ARIZONA_CLK_R_ENA_SET_MASK               0x0010  /* CLK_R_ENA_SET */
+#define ARIZONA_CLK_R_ENA_SET_SHIFT                   4  /* CLK_R_ENA_SET */
+#define ARIZONA_CLK_R_ENA_SET_WIDTH                   1  /* CLK_R_ENA_SET */
+#define ARIZONA_CLK_NG_ENA_CLR                   0x0008  /* CLK_NG_ENA_CLR */
+#define ARIZONA_CLK_NG_ENA_CLR_MASK              0x0008  /* CLK_NG_ENA_CLR */
+#define ARIZONA_CLK_NG_ENA_CLR_SHIFT                  3  /* CLK_NG_ENA_CLR */
+#define ARIZONA_CLK_NG_ENA_CLR_WIDTH                  1  /* CLK_NG_ENA_CLR */
+#define ARIZONA_CLK_NG_ENA_SET                   0x0004  /* CLK_NG_ENA_SET */
+#define ARIZONA_CLK_NG_ENA_SET_MASK              0x0004  /* CLK_NG_ENA_SET */
+#define ARIZONA_CLK_NG_ENA_SET_SHIFT                  2  /* CLK_NG_ENA_SET */
+#define ARIZONA_CLK_NG_ENA_SET_WIDTH                  1  /* CLK_NG_ENA_SET */
+#define ARIZONA_CLK_L_ENA_CLR                    0x0002  /* CLK_L_ENA_CLR */
+#define ARIZONA_CLK_L_ENA_CLR_MASK               0x0002  /* CLK_L_ENA_CLR */
+#define ARIZONA_CLK_L_ENA_CLR_SHIFT                   1  /* CLK_L_ENA_CLR */
+#define ARIZONA_CLK_L_ENA_CLR_WIDTH                   1  /* CLK_L_ENA_CLR */
+#define ARIZONA_CLK_L_ENA_SET                    0x0001  /* CLK_L_ENA_SET */
+#define ARIZONA_CLK_L_ENA_SET_MASK               0x0001  /* CLK_L_ENA_SET */
+#define ARIZONA_CLK_L_ENA_SET_SHIFT                   0  /* CLK_L_ENA_SET */
+#define ARIZONA_CLK_L_ENA_SET_WIDTH                   1  /* CLK_L_ENA_SET */
+
+/*
+ * R3841 (0xF01) - ANC SRC
+ */
+#define ARIZONA_IN_RXANCR_SEL_MASK               0x0070  /* IN_RXANCR_SEL - [4:6] */
+#define ARIZONA_IN_RXANCR_SEL_SHIFT                   4  /* IN_RXANCR_SEL - [4:6] */
+#define ARIZONA_IN_RXANCR_SEL_WIDTH                   3  /* IN_RXANCR_SEL - [4:6] */
+#define ARIZONA_IN_RXANCL_SEL_MASK               0x0007  /* IN_RXANCL_SEL - [0:2] */
+#define ARIZONA_IN_RXANCL_SEL_SHIFT                   0  /* IN_RXANCL_SEL - [0:2] */
+#define ARIZONA_IN_RXANCL_SEL_WIDTH                   3  /* IN_RXANCL_SEL - [0:2] */
+
+/*
+ * R3863 (0xF17) - FCL ADC Reformatter Control
+ */
+#define ARIZONA_FCL_MIC_MODE_SEL                 0x000C  /* FCL_MIC_MODE_SEL - [2:3] */
+#define ARIZONA_FCL_MIC_MODE_SEL_SHIFT                2  /* FCL_MIC_MODE_SEL - [2:3] */
+#define ARIZONA_FCL_MIC_MODE_SEL_WIDTH                2  /* FCL_MIC_MODE_SEL - [2:3] */
+
+/*
+ * R3954 (0xF72) - FCR ADC Reformatter Control
+ */
+#define ARIZONA_FCR_MIC_MODE_SEL                 0x000C  /* FCR_MIC_MODE_SEL - [2:3] */
+#define ARIZONA_FCR_MIC_MODE_SEL_SHIFT                2  /* FCR_MIC_MODE_SEL - [2:3] */
+#define ARIZONA_FCR_MIC_MODE_SEL_WIDTH                2  /* FCR_MIC_MODE_SEL - [2:3] */
+
 /*
  * R4352 (0x1100) - DSP1 Control 1
  */

include/linux/mfd/core.h

@@ -18,6 +18,12 @@
 
 struct irq_domain;
 
+/* Matches ACPI PNP id, either _HID or _CID, or ACPI _ADR */
+struct mfd_cell_acpi_match {
+	const char			*pnpid;
+	const unsigned long long	adr;
+};
+
 /*
  * This struct describes the MFD part ("cell").
  * After registration the copy of this structure will become the platform data
@@ -44,8 +50,8 @@ struct mfd_cell {
 	 */
 	const char		*of_compatible;
 
-	/* Matches ACPI PNP id, either _HID or _CID */
-	const char		*acpi_pnpid;
+	/* Matches ACPI */
+	const struct mfd_cell_acpi_match	*acpi_match;
 
 	/*
 	 * These resources can be specified relative to the parent device.

include/linux/mfd/da9052/reg.h

@@ -65,6 +65,9 @@
 #define DA9052_GPIO_2_3_REG		22
 #define DA9052_GPIO_4_5_REG		23
 #define DA9052_GPIO_6_7_REG		24
+#define DA9052_GPIO_8_9_REG		25
+#define DA9052_GPIO_10_11_REG		26
+#define DA9052_GPIO_12_13_REG		27
 #define DA9052_GPIO_14_15_REG		28
 
 /* POWER SEQUENCER CONTROL REGISTERS */

include/linux/mfd/da9150/core.h

@@ -15,6 +15,7 @@
 #define __DA9150_CORE_H
 
 #include <linux/device.h>
+#include <linux/i2c.h>
 #include <linux/interrupt.h>
 #include <linux/regmap.h>
 
@@ -46,23 +47,39 @@
 #define DA9150_IRQ_GPADC	19
 #define DA9150_IRQ_WKUP		20
 
+/* I2C sub-device address */
+#define DA9150_QIF_I2C_ADDR_LSB		0x5
+
+struct da9150_fg_pdata {
+	u32 update_interval;	/* msecs */
+	u8 warn_soc_lvl;	/* % value */
+	u8 crit_soc_lvl;	/* % value */
+};
+
 struct da9150_pdata {
 	int irq_base;
+	struct da9150_fg_pdata *fg_pdata;
 };
 
 struct da9150 {
 	struct device *dev;
 	struct regmap *regmap;
+	struct i2c_client *core_qif;
+
 	struct regmap_irq_chip_data *regmap_irq_data;
 	int irq;
 	int irq_base;
 };
 
-/* Device I/O */
+/* Device I/O - Query Interface for FG and standard register access */
+void da9150_read_qif(struct da9150 *da9150, u8 addr, int count, u8 *buf);
+void da9150_write_qif(struct da9150 *da9150, u8 addr, int count, const u8 *buf);
+
 u8 da9150_reg_read(struct da9150 *da9150, u16 reg);
 void da9150_reg_write(struct da9150 *da9150, u16 reg, u8 val);
 void da9150_set_bits(struct da9150 *da9150, u16 reg, u8 mask, u8 val);
 
 void da9150_bulk_read(struct da9150 *da9150, u16 reg, int count, u8 *buf);
 void da9150_bulk_write(struct da9150 *da9150, u16 reg, int count, const u8 *buf);
+
 #endif /* __DA9150_CORE_H */

include/linux/mfd/intel_bxtwc.h

+/*
+ * intel_bxtwc.h - Header file for Intel Broxton Whiskey Cove PMIC
+ *
+ * Copyright (C) 2015 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/mfd/intel_soc_pmic.h>
+
+#ifndef __INTEL_BXTWC_H__
+#define __INTEL_BXTWC_H__
+
+/* BXT WC devices */
+#define BXTWC_DEVICE1_ADDR		0x4E
+#define BXTWC_DEVICE2_ADDR		0x4F
+#define BXTWC_DEVICE3_ADDR		0x5E
+
+/* device1 Registers */
+#define BXTWC_CHIPID			0x4E00
+#define BXTWC_CHIPVER			0x4E01
+
+#define BXTWC_SCHGRIRQ0_ADDR		0x5E1A
+#define BXTWC_CHGRCTRL0_ADDR		0x5E16
+#define BXTWC_CHGRCTRL1_ADDR		0x5E17
+#define BXTWC_CHGRCTRL2_ADDR		0x5E18
+#define BXTWC_CHGRSTATUS_ADDR		0x5E19
+#define BXTWC_THRMBATZONE_ADDR		0x4F22
+
+#define BXTWC_USBPATH_ADDR		0x5E19
+#define BXTWC_USBPHYCTRL_ADDR		0x5E07
+#define BXTWC_USBIDCTRL_ADDR		0x5E05
+#define BXTWC_USBIDEN_MASK		0x01
+#define BXTWC_USBIDSTAT_ADDR		0x00FF
+#define BXTWC_USBSRCDETSTATUS_ADDR	0x5E29
+
+#define BXTWC_DBGUSBBC1_ADDR		0x5FE0
+#define BXTWC_DBGUSBBC2_ADDR		0x5FE1
+#define BXTWC_DBGUSBBCSTAT_ADDR		0x5FE2
+
+#define BXTWC_WAKESRC_ADDR		0x4E22
+#define BXTWC_WAKESRC2_ADDR		0x4EE5
+#define BXTWC_CHRTTADDR_ADDR		0x5E22
+#define BXTWC_CHRTTDATA_ADDR		0x5E23
+
+#define BXTWC_STHRMIRQ0_ADDR		0x4F19
+#define WC_MTHRMIRQ1_ADDR		0x4E12
+#define WC_STHRMIRQ1_ADDR		0x4F1A
+#define WC_STHRMIRQ2_ADDR		0x4F1B
+
+#define BXTWC_THRMZN0H_ADDR		0x4F44
+#define BXTWC_THRMZN0L_ADDR		0x4F45
+#define BXTWC_THRMZN1H_ADDR		0x4F46
+#define BXTWC_THRMZN1L_ADDR		0x4F47
+#define BXTWC_THRMZN2H_ADDR		0x4F48
+#define BXTWC_THRMZN2L_ADDR		0x4F49
+#define BXTWC_THRMZN3H_ADDR		0x4F4A
+#define BXTWC_THRMZN3L_ADDR		0x4F4B
+#define BXTWC_THRMZN4H_ADDR		0x4F4C
+#define BXTWC_THRMZN4L_ADDR		0x4F4D
+
+#endif

include/linux/mfd/intel_soc_pmic.h

@@ -25,6 +25,8 @@ struct intel_soc_pmic {
 	int irq;
 	struct regmap *regmap;
 	struct regmap_irq_chip_data *irq_chip_data;
+	struct regmap_irq_chip_data *irq_chip_data_level2;
+	struct device *dev;
 };
 
 #endif	/* __INTEL_SOC_PMIC_H__ */

include/linux/mfd/rtsx_pci.h

@@ -589,6 +589,7 @@
 #define   FORCE_ASPM_NO_ASPM		0x00
 #define PM_CLK_FORCE_CTL		0xFE58
 #define FUNC_FORCE_CTL			0xFE59
+#define   FUNC_FORCE_UPME_XMT_DBG	0x02
 #define PERST_GLITCH_WIDTH		0xFE5C
 #define CHANGE_LINK_STATE		0xFE5B
 #define RESET_LOAD_REG			0xFE5E
@@ -712,6 +713,7 @@
 #define PHY_RCR1			0x02
 #define   PHY_RCR1_ADP_TIME_4		0x0400
 #define   PHY_RCR1_VCO_COARSE		0x001F
+#define   PHY_RCR1_INIT_27S		0x0A1F
 #define PHY_SSCCR2			0x02
 #define   PHY_SSCCR2_PLL_NCODE		0x0A00
 #define   PHY_SSCCR2_TIME0		0x001C
@@ -724,6 +726,7 @@
 #define   PHY_RCR2_FREQSEL_12		0x0040
 #define   PHY_RCR2_CDR_SC_12P		0x0010
 #define   PHY_RCR2_CALIB_LATE		0x0002
+#define   PHY_RCR2_INIT_27S		0xC152
 #define PHY_SSCCR3			0x03
 #define   PHY_SSCCR3_STEP_IN		0x2740
 #define   PHY_SSCCR3_CHECK_DELAY	0x0008
@@ -800,12 +803,14 @@
 #define   PHY_ANA1A_RXT_BIST		0x0500
 #define   PHY_ANA1A_TXR_BIST		0x0040
 #define   PHY_ANA1A_REV			0x0006
+#define   PHY_FLD0_INIT_27S		0x2546
 #define PHY_FLD1			0x1B
 #define PHY_FLD2			0x1C
 #define PHY_FLD3			0x1D
 #define   PHY_FLD3_TIMER_4		0x0800
 #define   PHY_FLD3_TIMER_6		0x0020
 #define   PHY_FLD3_RXDELINK		0x0004
+#define   PHY_FLD3_INIT_27S		0x0004
 #define PHY_ANA1D			0x1D
 #define   PHY_ANA1D_DEBUG_ADDR		0x0004
 #define _PHY_FLD0			0x1D
@@ -824,6 +829,7 @@
 #define   PHY_FLD4_BER_COUNT		0x00E0
 #define   PHY_FLD4_BER_TIMER		0x000A
 #define   PHY_FLD4_BER_CHK_EN		0x0001
+#define   PHY_FLD4_INIT_27S		0x5C7F
 #define PHY_DIG1E			0x1E
 #define   PHY_DIG1E_REV			0x4000
 #define   PHY_DIG1E_D0_X_D1		0x1000

include/linux/mfd/samsung/core.h

@@ -132,6 +132,10 @@ struct sec_platform_data {
 	int				buck2_init;
 	int				buck3_init;
 	int				buck4_init;
+	/* Whether or not manually set PWRHOLD to low during shutdown. */
+	bool				manual_poweroff;
+	/* Disable the WRSTBI (buck voltage warm reset) when probing? */
+	bool				disable_wrstbi;
 };
 
 /**

include/linux/mfd/samsung/s2mps11.h

@@ -179,6 +179,7 @@ enum s2mps11_regulators {
 #define S2MPS11_BUCK_N_VOLTAGES (S2MPS11_BUCK_VSEL_MASK + 1)
 #define S2MPS11_RAMP_DELAY	25000		/* uV/us */
 
+#define S2MPS11_CTRL1_PWRHOLD_MASK	BIT(4)
 
 #define S2MPS11_BUCK2_RAMP_SHIFT	6
 #define S2MPS11_BUCK34_RAMP_SHIFT	4

include/linux/mfd/samsung/s2mps13.h

@@ -184,5 +184,6 @@ enum s2mps13_regulators {
  * Let's assume that default value will be set.
  */
 #define S2MPS13_BUCK_RAMP_DELAY		12500
+#define S2MPS13_REG_WRSTBI_MASK		BIT(5)
 
 #endif /*  __LINUX_MFD_S2MPS13_H */