Commit bca28f8f authored by Tomasz Figa's avatar Tomasz Figa Committed by Kukjin Kim

ARM: EXYNOS: Add support for Exynos secure firmware

Some Exynos-based boards contain secure firmware and must use firmware
operations to set up some hardware.

This patch adds firmware operations for Exynos secure firmware and a way
for board code and device tree to specify that they must be used.

Example of use:

In board code:

  ...MACHINE_START(...)
          /* ... */
          .init_early   = exynos_firmware_init,
          /* ... */
  MACHINE_END

In device tree:

  / {
          /* ... */

          firmware@0203F000 {
                  compatible = "samsung,secure-firmware";
                  reg = <0x0203F000 0x1000>;
          };

          /* ... */
  };
Signed-off-by: default avatarKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: default avatarTomasz Figa <t.figa@samsung.com>
Signed-off-by: default avatarKukjin Kim <kgene.kim@samsung.com>
parent a4a18d2b
......@@ -6,3 +6,13 @@ Required root node properties:
- compatible = should be one or more of the following.
(a) "samsung,smdkv310" - for Samsung's SMDKV310 eval board.
(b) "samsung,exynos4210" - for boards based on Exynos4210 SoC.
Optional:
- firmware node, specifying presence and type of secure firmware:
- compatible: only "samsung,secure-firmware" is currently supported
- reg: address of non-secure SYSRAM used for communication with firmware
firmware@0203F000 {
compatible = "samsung,secure-firmware";
reg = <0x0203F000 0x1000>;
};
......@@ -25,6 +25,7 @@ obj-$(CONFIG_SMP) += platsmp.o headsmp.o
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
obj-$(CONFIG_ARCH_EXYNOS) += exynos-smc.o
obj-$(CONFIG_ARCH_EXYNOS) += firmware.o
plus_sec := $(call as-instr,.arch_extension sec,+sec)
AFLAGS_exynos-smc.o :=-Wa,-march=armv7-a$(plus_sec)
......
......@@ -30,6 +30,8 @@ void exynos_init_late(void);
void exynos4_clk_init(struct device_node *np);
void exynos4_clk_register_fixed_ext(unsigned long, unsigned long);
void exynos_firmware_init(void);
#ifdef CONFIG_PM_GENERIC_DOMAINS
int exynos_pm_late_initcall(void);
#else
......
/*
* Copyright (C) 2012 Samsung Electronics.
* Kyungmin Park <kyungmin.park@samsung.com>
* Tomasz Figa <t.figa@samsung.com>
*
* This program is free software,you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/io.h>
#include <linux/init.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <asm/firmware.h>
#include <mach/map.h>
#include "smc.h"
static int exynos_do_idle(void)
{
exynos_smc(SMC_CMD_SLEEP, 0, 0, 0);
return 0;
}
static int exynos_cpu_boot(int cpu)
{
exynos_smc(SMC_CMD_CPU1BOOT, cpu, 0, 0);
return 0;
}
static int exynos_set_cpu_boot_addr(int cpu, unsigned long boot_addr)
{
void __iomem *boot_reg = S5P_VA_SYSRAM_NS + 0x1c + 4*cpu;
__raw_writel(boot_addr, boot_reg);
return 0;
}
static const struct firmware_ops exynos_firmware_ops = {
.do_idle = exynos_do_idle,
.set_cpu_boot_addr = exynos_set_cpu_boot_addr,
.cpu_boot = exynos_cpu_boot,
};
void __init exynos_firmware_init(void)
{
if (of_have_populated_dt()) {
struct device_node *nd;
const __be32 *addr;
nd = of_find_compatible_node(NULL, NULL,
"samsung,secure-firmware");
if (!nd)
return;
addr = of_get_address(nd, 0, NULL, NULL);
if (!addr) {
pr_err("%s: No address specified.\n", __func__);
return;
}
}
pr_info("Running under secure firmware.\n");
register_firmware_ops(&exynos_firmware_ops);
}
......@@ -57,6 +57,7 @@ DT_MACHINE_START(EXYNOS4210_DT, "Samsung Exynos4 (Flattened Device Tree)")
.smp = smp_ops(exynos_smp_ops),
.init_irq = exynos4_init_irq,
.map_io = exynos4_dt_map_io,
.init_early = exynos_firmware_init,
.init_machine = exynos4_dt_machine_init,
.init_late = exynos_init_late,
.init_time = exynos_init_time,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment